What causes this? Video or Audio freeze on plays?

I have a new HP Pavilion 23 AMD 6 with 3.6 processor.
During video plays the video and audio will freeze but the audio is there too with the last input blurrping out like a loud F**T.  That's the best I can explain it.  It is only for second or so but annoying. 
Here's a monkey in the works. The large screen TV does it too. Here's the conundrum. I think the PC did this before I switched to Comcast, about a month or more before Comcast was introduced into the equation. The first knee jerk would be to blame Comcast since the large screen tv does it too. However, I have never noticed it on the tablet, netbook or older Toshiba laptop. ???? So that might let Comcast off the hook, although it is odd that the new HP and the TV both do it.
Is there any issues with the audio or video card on this particular PC or a setting that could help?  Here is a clip of the Device Manager and I trust I've shown the audio and video pertinents.  I have used all the updates that this pc has asked for. 
Thanks so much for any help!    ":-D   Jack
I ALWAYS KUDO AND MARKED SOLVED. IT'S THE RIGHT THING TO DO ... doncha know. ":-D
Look to the left and click on the STAR for a KUDO
Look to the right and see OPTIONS to mark ACCEPT AS SOLUTION. Thanks!
This question was solved.
View Solution.

I know your pain... I have battled with this for years.  My system is a Pavilion dv7 laptop.  I am constantly plagued by the audio system, which frequently f*rts, and even more frequently, skips (backwards) a short time during playback - it's doing it right now!  Sometimes, every few seconds.  Other times it won't happen much at all... with no apparent difference in what I am doing or running.
Some things I can add to this thread:
1. The audio sucks regardless of the source !!  I've seen other threads where streaming over interent was discussed - for me, I get the issue:
     a) audio/video browsing eg youtube or streamed webinars etc
     b) playing local music, ie iTunes .mp3 files saved on local disk
     c) playing from CD/DVD drive
2.  I run a system with all the latest drivers from HP,  WIn 7.  No games or other crud. 
I have seen many people comment with symptoms which I am sure is the same issue - for years.  Wish someone could finally come up with a fix - it is a real sytem problem.
Regards,

Similar Messages

  • HT4589 When using compressor voice is not sync with video. What causes this and how to fix it, please?

    When using compressor voice is not sync with video. What causes this and how to fix it, please?

    Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
    Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
    If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
    Let us know how you get on.

  • HT1270 Anyone have a MacBook Pro freeze with a beeping alarm sound. What caused this.

    Just wondering what caused my MacBook Pro to freeze and have a loud alarm sound. I just installed new memory.

    Reinstall the old memory and see if it goes away
    If it does then the new memory is bad

  • Mac randomly crashes, screen turns green and white, and it works fine upon restart. What causes this and how can I fix it?

    My MacBook Pro 13 inch (I've had it for about a year and a half) has started crashing randomly. It happens about once a week and it will happen when I'm in the middle of either watching a video, typing a paper, playing a game, etc. The computer clicks loudly and the screen becomes a series of green and white lines. It works fine upon restart, but it's still annoying whenever it happens. What causes this? Is it fixable?

    The image suggests an issue with the graphics board.
    The issue may happen more when your machine is generating additional heat, as when you're watching or processing video, or gaming. I can't say for certain, of course, but certain things will reduce the chance of the problem recurring:
    1. Keep your machine as cool as possible. When there's additional heat, turn up the fan, or use an app like HD Fan Control to reduce the heat. Use your computer the way you see fit, but be conscious of heat.
    2. Back up on a regular basis. Logic board problems can lead to more serious issues down the line, so backing up is a good way of safeguarding your data.
    3. Look up "Logic Board Woes" on Google for a comprehensive discussion of the issue.

  • My iPOD 30 GB classic has no sound.  Screen shows music is playing but cannot hear it.  This happenend last fall, and then in december it started playing again.  Recently it has stopped playing again. What causes this?

    My IPOD 30 GB classic  has no sound.  THis problem started last summer intermittently.  THen in December it started playing again and did so for about 3 months without a problem.  Again, recently the sound stopped coming from the ipod.  I usually use a BOSE docking station that seems to be working fine. THe screen indicates that the songs are playing, but there is no sound, either thru headphones or on the docking station.  I have reset, rebooted and restored and still no sound.  What causes this to happen and is there a fix?

    Which version of iTunes are you using?
    What is the iPod software number as shown in the iTunes Summary windows?
    If both the soundock and the earphone has no sound after the HardReset, then I think you Audio chip has been fried.
    But please try this Hard Reset again
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Test the sound again.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    If it doesn't help, try Restore after the above.
    Good Luck!

  • My iPhone 4 just went black all of the sudden.  I can't get it to turn back on and the battery wasn't dead.  Anyone know what causes this and how to get it back on?

    My iPhone 4 just went black all of the sudden.  I can't get it to turn back on and the battery wasn't dead.  Anyone know what causes this and how to get it back on?

    This has happend to my ipod once...
    did u keep it somewhere so tightly pressed??
    that might be a reason. Don't worry it will turn on after some time, try connecting it to your computer or charger and see if it helps!!...

  • Every so often when using safari my bookmarks disappear and then later the list shows up again.  Does anyone know what causes this and how to fix it?

    Every once in awhile while using safari my bookmarks list disappears.  Later it just shows up again.  Anyone know what causes this and how to fix it?

    I have had exactly the same problem now with two mini iPads.  Everything was tried; 1) restarting; 2) restoring factory settings etc.  NONE worked.  Eventually Apple agreed to replace it.  I have had the replacement now for two to three months and exactly the same thing is happening again. So off to Apple tomorrow to get another replacement.
    I am quite a heavy user of the iPad so wonder if this is something to do with the fault.
    It is so frustrating as sometimes reset works, and then after 10/20/30/40 minutes (you pick) it goes unstable again.

  • Mac user OS 10.6.8 Firefox 6.0.2. Click the Firefox icon in dock, program does not open new window. Type cmd+N to open new window, cmd+T to open new tab or cmd+L to enter URL, nothing happens. What causes this, and what can be done?

    Mac user OS 10.6.8 Firefox 6.0.2. Click the Firefox icon in dock, program does not open new window. Type cmd+N to open new window, cmd+T to open new tab or cmd+L to enter URL, nothing happens. What causes this, and what can be done?

    It's strange. The problem apparently resolved itself after I ran TechTool on it. When I clicked on Firefox last night, I had no problem opening a window. Thanks for your help. (As to your previous post, the focus was on Firefox and neither the speed keys nor the menu bar would open a window or tab of allow me to enter a URL to open a window. Strange!)

  • WHAT CAUSES FOR AN APPLICATION TO FREEZE DURING INSTALL?

    What causes for an application to freeze during install?  and how do I fix it

    helloWorld pretty much said it all.
    When I'm looking for problems like that nothing beats a good trace file. Also don't dismiss the idea of programmer stupidity (of the one that developed the app), I've ran across code where exceptions where caught and nothing done about it, just let thing run merrily along again. The cause is usually farther back in the trace than the point it hangs or appears to start having problems.

  • Inconsistency in structure u0093KOMPu0094 - what caused this?

    Hi All,
    We had a problem where all users experienced an ABAP Dump 'DDIC_TYPE_INCONSISTENCY' when running transaction codes such as FB50.
    To solve the problem SAP sent the following instructions:
    “The problem is due to Inconsistency in the Dictionary for the structure
    KOMP. If you go to TCode SE11 : KOMP > Display : Utilities > Runtime
    Object > Check -> Active runtime object for KOMP is inconsistent.
    To solve this error, please activate the structure KOMP manually by
    going to tcode SE11 : enter KOMP > Display : Structure – Activate”
    I have asked SAP what exactly caused this problem and they mentioned that a user had changed underlying structure of KOMP named KOMPAKE.
    Tcode SE11 is locked in Production to prevent stuff like this from happening and the only tcode the users ran before we experienced the first dump is KE30.
    SAP insists that KE30 could not have changed structure.  And the only changes made in production were transports imported 5 days before we experienced this problem.
    Would anyone have ideas on how I can determine what caused this problem?
    I would appreciate any help.
    Thanks,
    Kevin

    I looked at the version management for this structure KOMPAKE and the only entry I see is from the same user ID with a data/time stamp right before we experienced the first ABAP Dump, and the entry in the version managements starts like this:
    Version(s) in the development database:
      activ          X  640               
    I also noticed the same structure KOMPAKE changed in our QA environment by a user that was testing KE30 a day after we had this problem in Production.
    So maybe KOMPAKE was auto-generated by KE30 and somehow failed before it could complete, leaving it in an inactive state?
    But if that is the case why were there no problems before, can a structure be auto-generated if its already active?
    I also found this System log in SM21 where it shows the first ABAP Dump and the errors before it:
                                                                                    Time     Ty. Nr  Cl. User         Tcod MNo Text                                               
    19:06:14 DP                            Q0I Operating system call recv failed (error no. 232 )           
    19:06:14 DP                            Q04 Connection to user 10524 (User1 ), terminal 68 (PCComputer ) lost
    19:06:24 DIA 000 100 User1        KE30 R2C Terminal 00068 in status DISC                                
    19:06:24 DIA 000 100 User1        KE30 R68 Perform rollback                                             
    19:06:24 DIA 000 100 User1        KE30 R47 Delete session 001 after error 004                           
    19:06:24 DP                            Q0G Request (type DIA) cannot be processed                       
    19:07:26 DIA 000 000 SAPSYS            R68 Perform rollback                                             
    19:07:27 DIA 000 000 SAPSYS            AB0 Run-time error "DDIC_TYPE_INCONSISTENCY" occurred            
    19:07:27 DIA 000 000 SAPSYS            AB1 > Short dump "070327 190727 hsapecp1 SAPSYS " generated
    Message was edited by:
            Kevin Elias
    Message was edited by:
            Kevin Elias

  • In my email auto fill it lists addresses I haven't used in 2  years as "recent others". What causes this, the contact information for these people was deleted some time ago.

    In my email auto fill it lists addresses I haven't used in 2  years as "recent others". What causes this, the contact information for these people was deleted some time ago.

    Mail, Window Menu, Previous Recipients.
    Select the ones you don't want and delete them.
    If you want to add them to contacts, click that button.

  • The icon "pesonal hotspot" keeps disappearing om my iphone.what causes this and how do i rectify it?

    the icon "personal hotspot" keeps disappearing on my iphone,what causes this and how do i rectify this?

    Here is Apple's latest response to the FaceTime issue that cropped up last week:
    FaceTime 4-16 Issue
    Folllow the troubleshooting steps to try to resolve your issues.
    Cheers,
    GB

  • HT3228 I have one of the origin iPads. Suddenly when I receive an email only the headings are shown - the body of the text is blank. Also previously received emails have also had the text body removed. Any suggestions as to what caused this?

    I have one of the original iPads. Suddenly (from yesterday) when I receive an email only the headings are shown - the body of the text is blank. Also previously received emails have also had the text body removed. Any suggestions as to what caused this?

    Try this.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • TS1702 what causes this error code - 0xe8000084

    when synching my phone, I get the above error message when itunes tries to synch several apps. What causes this and what can I do to correct it?

    There if anything on this some troubleshooting page for 0xE8 error codes helps : http://support.apple.com/kb/TS3221

  • What causes This workbook cannot be expanded error?

    I am trying to open a Discoverer workbook and am getting the error message "This workbook cannot be expanded". What causes this error and how can I fix it or work around?
    Thanks,
    Cherie Machler

    Can you just click 'open' to run the report without exanding it to see the worksheet?
    I have heard of this before and one work around was to just open it and it would work anyway. This was a couple of years ago and not sure if the same 'feature' still exists?
    Russ

Maybe you are looking for

  • How to print the components in scrollpane

    hi there, can anyone tell me how to print the scrollpane components, i mean the headers & the main view of the component. i've a scrollpane with the following code and i want to print the components: JScrollPane pane = new JScrollPane(aTextPane); pan

  • Can't open apps in mountain lion

    i need to upgrade some software or apps since i downloaded mountain lion, however, i have no problem downloading them, i just cant open them. mountain lion refuses to open any app or software i did not download from the app store. here is what the po

  • Oracle Financials & Procurement w/o HRMS

    When implementing Financials & Procurement modules first, are there key decisions made that will impact- (positively or negatively) the implementation of HRMS at a later date. I've heard that problems can be created when the decisions made for the Fi

  • Package/Class/Function Problem

    From the Getting Started Lessons in Flex Builder 2, one thing I am trying to learn (but failing) is how to use the TimerEvent class. The sample uses the following code: package import flash.display.Sprite; import flash.events.TimerEvent import flash.

  • Are there any patches required after installed Oracle Linux 6.3?

    The latest Oracle linux 6.3 is completed installed, I have following 2 questions: 1. Is there any required patches I should install, and where I can download them from? 2. After the installation, and works alright, what else I need to perform? Thanks