What CD/DVD drive is compatible with Satellite A10-S103

I am using portable computer Toshiba Satellite A10-S103 and I am about to replace original CD/DVD-ROM drive with a new one which can also write CDs and DVDs.
However, I have been given a notice, that after installing new DVD drive the "IDE #1 error" message may appear. According to my knowledge, this error can be avoided by replacing the old drive with a new one that requires the same Primary/Secondary Master/Slave/Cable select settings as the old one.
Can you recommend me a DVD-RW drive that could replace the old DVD-ROM drive and would work without any further HW adjustments?
The new DVD-RW drive should be similar to i.e.
[http://www.sonynec-optiarc.de/en/exhibits/slim-line-drives/ad-7540a.html] .
However, I was not able to decide whether this device will or will not work in my computer as I do not know settings of the original DVD drive.
My original Toshiba DVD drive information as follow:
1. 'Model No.' SD-C2612
2. 'ROM Ver.' 1315
3. 'Serial No.' 394N002659
4. 'Ver. No.' 302.
The computer is already out-of-warranty
Thank you.

>However, I have been given a notice, that after installing new DVD drive the "IDE #1 error" message may appear. According to my knowledge, this error can be avoided by replacing the old drive with a new one that requires the same Primary/Secondary Master/Slave/Cable select settings as the old one.
You are right. The IDE #1 error appears because the BIOS doesnt recognize the new internal CD/DVD drive due to the wrong master/slave/c-sel settings.
Usually such settings are fix and cannot be changed like on the external ODDs using other jumper position.
The firmware controls the internal notebooks ODD settings.
Therefore the usage of the supported and compatible ODDs is very important.
Sorry, but I didnt find any details about compatible CD/DVD drives.
Did you take a look into the user manual of your notebook series???
In my user manual I found some info about the compatible drives with my notebook.
So maybe you are a lucky man and your user manual will provide some useful informations.

Similar Messages

  • What CD/DVD drive is compatible with Satellite 1400-103

    Hi
    I Have Been Looking For A Replacement Dvd Rom For My Toshiba Satellite 1400-103 and I can't Find Any one.
    Due To It Been So Old So I Just Wondering If There Are Other Compatible Dvd Drives That I Can Buy For My Laptop?
    Thanks

    I think this CD/DVD drive could be compatible:
    - Toshiba SD-R2102
    - Matsu****a UJDA720**
    - TEAC DW-28E**
    - Toshiba SD-C2502**
    - TEAC DV-28E-B34
    - Hitachi GDR-8081N-ATAB**
    All this drives I have found in the user manual for the Sat 1400-103
    PS: User manual can be downloaded from the Toshiba page too ;)

  • What lightscribe CD/DVD drives are compatible with Satellite P300

    Very fast.
    What optical lightscribe drives i can mount in my Toshiba Satellite P300.
    At now i have pioneer dvr-kd08 but i wont lightscribe.

    This is not that easy to say as compatibility depends on the slave/master settings and therefore you would need to ask an ASP.
    Maybe check some lightscribe ODDs and ask the guys from ASP.
    But honestly, would you really want to waste your money on this feature? I know, those discs look pretty nice when used ligthscribe on it, but is it worth it?
    I have one in my other notebook but I have only used it once.
    And you will need special blank CDs/DVDs with this surface to use lightscribe feature.

  • What external dvd drive is compatible with IMAC with optical drive

    what external drive is compatiblee with IMAC with optical driv

    As far as my experience goes I have had all external dvd drives work throu USB, the USB stands for Universal Seriel Bus and that means the drives are already in the device, so you can probably just go to best buy or to new egg and order a cheap one.
    If you have usb 3.0 I would go with that since its one of the faster ones and you will save money on using a thunder bolt device, and trust me a $17 dvd player works just as good as a $120 dvd player.

  • What CD/DVD brands are compatible with Satellite A300?

    Hello,
    I have a big problem when I burn the media (cd or dvd) on my laptop toshiba satellite A300.
    I have already try different mark (philips, sony, tdk, ...) but for the tdk it works one time on five.
    Here I bought the sony cd recordable and when I wanted to burn, i received the message "media incompatible or bad quality" :-(
    I use the soft "cd burner xp"
    I don't understand which mark should i buy ? of is this a problem of softwer ?
    thank you in advance to bring your lights.
    EG
    (Belgium - Soignies)

    thanks for yours responses.
    in fact i use only DVD+R (tdk, philips and sony).
    I had problems with tdk and mainly with phillips.
    All my media (cd/dvd) were in the trash :-( it's not normal
    I am going to try clean the lens with alcool and buy verbatim.
    with the media CD-R sony no media work :-( it's crazy.
    It's strange because the burning goes well (successfull) and when i put the cd on my cd player it doesn't work (run for a moment and print "no disk").

  • Satellite A200-195: What CD/DVD drive is compatible?

    Hey Guys and gals,
    I have had a look and asked Toshiba but no answer given so thought I would ask the experts here.
    My DVD RW in my laptop TS L632D Has died and I need a new one.
    So what one can I buy and fit without problems.
    These drives are known to have issues with conflicts etc... so a different drive would be better.
    So what do you guys and gals suggest.
    Cheers,
    Chris

    Hi
    Thank you very much that you are seeing us as experts :)
    We all here are Toshiba notebook users and as you probably dont know this is a user-to-user forum. :) so maybe not really experts ;)
    To be honest its not known to me that this CD/DVD drive causes issue.
    As you probably dont know every CD/DVD drive doesnt support all possible CDs or DVDs from different manufacturers.
    Some CDs and DVDs are more compatible and some CDs or DVDs are not fully compatible.
    However, the point is that you need a new CD/DVD drive.
    I checked the A200 user manual (can be downloaded from the Toshiba page) and there is a list with some compatible drives.
    Check the user manual page 6 and 7
    You can also call the ASP in your country. The guys known what CD/DVD drives are compatible with your notebook!
    Bye

  • What external dvd burner is compatible with my 2007 mac mini running OS X 10.5.8?

    What external dvd burner is compatible with my 2007 mac mini running OS X 10.5.8?

    I have an LG GE24LU20 and works great with either my iMac or Mac Mini.
    LG GE24LU20 Optical Drives - 24x External Super-Multi DVD Rewriter - LG Electronics US
    Heck' I can even open and close the tray from my menu bar icon,
    plus it is way faster and less finicky than the superdrives.

  • What DVD drives are compatible with Equium A60 PSA67E?

    my question; what dvd drives are compatible for an equium a60 (psa67e-001001en)?
    background; i did a very silly thing! whilst i was in japan and about 18 months after purchasing my a60 in the uk, the dvd drive packed up. i replaced it with a teac dvd drive and it worked like a dream! i threw the old drive away (i think it was a matsu****a, but can't remember the exact model). anyway, i came home and had a bit of spare time on my hands so i decided to tweak my machine and corrupted the windows xp registry.
    Now the windows xp runs in a loop, i can't get access to it and i need to wipe the hard drive and start again basically. i put the recovery disk in, but the computer doesn't read from it and frustratingly finds its way to the loopy windows. i have determined that it is not recognising the teac drive that i used to replace the old one. i think if i put an original type back in, the firmware may recognise the drive and i'll be back in business.... or so i hope!
    of course, any other advice would be gratefully received too! thanks.
    work around??? ps... a work around i thought up... copy the contents of the recovery disk on to a hard drive (using my old computer) then swap the current hdd in my a60 with it... theory; when the computer finds the contents during booting, it will install xp on another part of that hard drive and i'll have a working machine again. could something like that work???????? any thoughts????
    Message was edited by: markchev66

    thanks again friend!
    as it turns out, that pioneer drive rung bells.
    though my TEAC (DV-w28e) replacement looks identical to my previous drive and has worked ok with windows, at "the bios level" it is not being recognised... is that something you would have expected???? i must admit, with windows, the TEAC outperformed the original drive and was surprised it wasn't reading my recovery disk after my self infliction! i also tried using a usb hdd loaded up with the recovery disk and that didn't work.
    but you answered my question so thanks a million for that.

  • HT1583 What blank DVD disks are compatible with burning a film from Idvd on an applemac?

    I have just finalized a project in imovie and this message came up on the screen - "Your project exceeds the maximum duration. To burn your DVD, change the encoder setting in the project info window".
    I have changed the encoder setting from best fit to Professional but I am having burning the film to a dvd. The computer tells me to load a dvd or my driver is busy - which it isn't it only has a blank dvd disk in it. So I was wondering whether my DVD disks are compatible with the applemac computer!
    HELP!

    Hi
    So I was wondering whether my DVD disks are compatible with the applemac computer!
    And if You tell - what brand and type You are trying to use - I will be so much easier !
    But most often the problem is
    • Do NOT - insert the DVD disk before iDVD specifically as You to do this. As Desktop will catch it and try to format it as a Data-DVD - Not what You want (a Video-DVD) as Data-DVD can not be played on standard DVD-players.
    To get it even better I do
    • Use Verbatim - Never Memorex or NoName etc cheap brands (as they don't work OK for Me)
    • DVD-R - as they play on even older DVD-players
    • Burn Speed - set down to x2 or x4 MAX ! - Best IS NOT BEST at all here !
    Yours Bengt W

  • What external tape drives are compatible with sunblade 100s?

    hi,
    please, can anybody tell me:
    1. where i can find out whether or not a particular tape drive is compatible with my sunblade 100 workstation running solaris 9?
    2. do external tape drives usually connect to the workstation's serial port?
    3. what kind of specs/features should i be looking out for?
    thanks in advance for your replies.
    Message was edited by:
    sun-certified

    I would imagine you could use any tape drive with your sun blade... most are connected by either scsi or fiber channel... there could be some that are network controlled... not aware of any that are controlled by serial port...
    GOOGLE is a wonderful thing... try it, you will like it...
    compatibility is more concerned with which OS and program you want to use with the tape drive...
    specs depend on what you are backing up... a single user would most likely only need a single drive... if you were a multi-national corp, then maybe you might contact Sun Sales...
    maybe you should to some research yourself...
    haroldkarl

  • What internal hard drive is compatible with Macbook Pro (15-inch, late 2008)?

    G'day guys,
    I was just wondering which internal hard drive is compatible with Macbook Pro (15-inch, late 2008)?
    Thanks
    bryce

    same as used by Apple:
    http://www.ebay.com/itm/Toshiba-MQ01ABD1001TB-1TB-2-5-inch-SATA-Laptop-Notebook- Hard-Drive-1-0-TB-/380643766002?pt=US_Internal_Hard_Disk_Drives&hash=item58a022e ef2
    I own many of them.

  • What optical drive is compatible with Satellite A30

    Hi,
    My A30-104's builtin DVD/CDRW drive seems to be on the way out (fails to mount most disks, just clicks a lot and tries/fails to spin up) so I need to go about replacing it. I have two questions:
    1) The drive is listed as "Toshiba SD-R2412" and I found plenty of matches for this on eBay. However, some listings mention an additional 3-digit number (e.g. 202, 209 etc.) after the designation. What does this mean, and how can I find out the number for my drive (and is it i that important)?
    2) Is there a DVD-writer available in teh same form-factor, and would it be likely to work with my laptop?
    Thanks in advance!

    Hi
    The additional notebook drives numbers are not know to me and I dont know the meaning.
    However, you have to know that not all drives can be used in the notebook. The CD/DVD drive supports different master/slave/ c-sel settings which are not changeable and sometimes dont match with the notebook.
    Therefore you have to use only the drives recommended by Toshiba! As far as I know the different compatible drives are listed in the user manual. Please take a look there!
    I found a several supported drives. For example:
    TEAC DW-224E
    TEAC DV-W22-85
    Toshiba SD-C2612
    Toshiba SD-R2412
    But as said above, check the user manual. All drives listed there
    Greetings

  • How can I determine what internal DVD drives are compatible w/ my G5?

    I'd like to put a new DVD drive in my G5. It's one of the original 1.8 dual machines, with some extra RAM. I'm having trouble with the drive these days, and I'd like to figure out what drives are compatible. Thoughts?

    I cannot speak for all drives but today I installed a Pioneer 710 ( same drive as 111 ) in place of the original Pioneer 106.
    I have only tested it with Toast to burn a DVD-R and playing a CD and all is well.

  • Ts-L633a DVD drive not compatible with Windows 7 64bit upgrade

    Ts-L633a DVD drive on my Pavilion Dv7 1232nr is not compatible with Windows 7 64bit upgrade but will work fine if I downgrade back to Vista 64bit so what DVD drive is there other then the TS-L633a drive that I already have that is compatible with the Windows 7 64 upgrade so that I can buy and install on my laptop.

    Here's one out of nowhere:  do you have CD/DVD software that includes Sonic DLA or something like it?  I've seen that take over drives and prevent normal operation.
    If you right click on the drive and hit properties, are there any suspicious looking tabs?
    Total WAG, and about 1% likely, but there you go.
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • What NI Stepper Drive is compatible with both NEMA 11 and NEMA 42 stepper motors?

    I have a NI PXI-7350(Motion Controller), a NI UMI7774 (Universal Interface), and a NI P70530(Stepper Drive) and I tried linking up a new NEMA 11 stepper motor linear actuator from Hayden Kirk and kept getting a constant red blinking light on the driver. I then connected my new NEMA 23 stepper motor linear actuator from Hayden Kirk and the driver had the go ahead green light and it worked fine. I consulted the manuals and saw that the driver was only compatible for NEMA 17-34 Steppers. I tried the third party setting as well for the NEMA 11 to no avail. Does anyone know of a NI Stepper Drive that is compatible with my UMI and Motion Controller and also is compatible with a NEMA 11 and NEMA 42 (another motor I need controlled) stepper motors?????
    Solved!
    Go to Solution.

    Thank you for the quick response
    So I have connected as the Third Party Motor option with the P70530 Stepper Driver. I have read the manual and selected the appropriate DIP switches for the third party motor setting. As instructed I downloaded the P7000 Tools 2.11 to set up the motor with the driver. When I open it and try to search for the driver nothing is located. I have appropriately changed the COM settings in the device manager to the appropriate values and also I am seeing the steady green light on the driver. I am at another stand still. What else can I do to get the driver recognized so I can set up these motors?
    Thank you for your time,
    Tom

Maybe you are looking for

  • Customizing BI publisher

    I need to customize the AR customer statements report. The standard report fires a pro*c program 1. It populates data in ar_statement_headers and AR_STATEMENT_LINE_CLUSTERS. 2. Then it calls the XMLP to generate report 3. Waits for XMLP to complete,

  • MS Word docs with Right Facing Arrows print as Left Facing on top of next word

    Printer:  M830 Multifunction printer/copier. Computer OS:  Win7 Driver:   Both the PCL & PS versions of HP Universal Printing v5.9.0                            -- HP Universal Printing PCL 6 (v5.9.0)                            -- HP Universal Printin

  • Cannot find file drm-web.config after installation

    Hi all, I am trying to install drm version 11.1.2 on MS Server 2008 64bit. I tried installing the 64bit version of DRM. The installation succeeds but when the configurator is launched I get an error that it closed. I opened the web client and receive

  • Horizontal lines across the screen of my Vision:M, need he

    I have had my player since Janauaryexcuse me, February and have not had a single issue until today. I turned it on, and there are thin, horizontal, white lines running across the screen. They seem to be most intense over the text at the top left hand

  • PLS-00306 Wrong number or types of arguments in call to '='

    I am facing some problem in executing my SQL statement. Can anyone help me solving the problem generated from the beneath mentioned SQL statement - DECLARE CURSOR C1 IS select slprodno FROM DCR008 WHERE slrefid='1'; ProductCode C1%ROWTYPE; BEGIN