What changed between 2.6.16 and 2.6.17?

I recently acquired a laptop and installed Arch without problems via the 0.7.2 CD. This installed the 2.6.16 kernel which runs fine on the system. However, upgrading to 2.6.17 results in system hang-ups at boot no matter what I try. It always locks up at the message "ACPI: PCI Host Bridge [(some garbage I can't remember)]"
I have the latest and greatest up-to-date Arch running fine on two desktops, but it doesn't agree with my lappy at all. Does anyone know what exactly changed between the two kernel versions that could cause this?
P.S. I've tried everything from a custom vanilla kernel, custom Arch kernel, custom Beyond kernel, enabling and disabling everything I could think of. I've tried countless GRUB arguments (nolapic, noapic, acpi=off, acpi=noirq, nosmp, pci=nommconfig, and a bunch of other that have been suggested to me) and I've tried several combinations of hooks and modules when running mkinitcpio. Damn frustrating, it is.  :evil:

badger wrote:
One change with regards to ACPI and the kernel26 package was in the kernel config: changing the ACPI video component to be compiled as a module (I'm not saying this is the reason for the problem, just that this was a change). Original thread: http://bbs.archlinux.org/viewtopic.php?t=24376 and associated feature request http://bugs.archlinux.org/task/5281 I'm grateful the change was made.
cheers
Thanks for the lead. I'll check it out.

Similar Messages

  • What different between ADF Rich Portlet and Trinidad HTML Portlet?

    Hi all,
    I've some question about adding portlet to portal pages
    What different between ADF Rich Portlet and Trinidaf HTML Portlet?
    And benifit of each?
    Regards

    Hi all,
    I've some question about adding portlet to portal pages
    What different between ADF Rich Portlet and Trinidaf HTML Portlet?
    And benifit of each?
    Regards

  • What difference between a domain trust and a forest trust?

    What difference between a domain trust and a forest trust?

    Greetings!
    The answer is right on the question! :)
    I think it is best to distinguish properly between forest and domain. This article is a good one:
    What Are Domains and Forests?
    But in a nutshell, a forest trust is mostly used between two organizations, Suppose company A has a unique forest and company B has another unique forest as well, when they are merged they can simply create a forest trust between each other, This trust can
    be one-way or two-way depending on your needs.
    Domain trusts are between a single instance (domain) of a forest to another instance (domain) of another forest. It is worth mentioning that trust can be transitive as well.
    What Are Domain and Forest Trusts?
    I hope you got the answer.
    Regards.
    Mahdi Tehrani   |  
      |  
    www.mahditehrani.ir
    Please click on Propose As Answer or
    to mark this post as
    and helpful for other people.
    This posting is provided AS-IS with no warranties, and confers no rights.
    How to query members of 'Local Administrators' group in all computers?

  • NTP whats changed between 12.2T and 12.3T

    I have recently refreshed our network with ISR routers 2851/3845s at the core. previously 2600/3660s
    NTP no longer syncs
    the configs are the same.
    The way i did it I synced NTP at the internet router from an external clock. then allowed NTP packets through the firewall to a core router, the rest of the network then synced with the core router.
    I can only think something must have changed in the way NTP is handled by the newer IOS
    anybody got the answers

    I have had some situations where I replaced a router running 12.2 (or 12.2T) with a router running 12.3 (or 12.3T) and have not had difficulties in getting NTP working on them. I am not aware of any change that would produce the symptoms that you describe.
    Perhaps we can look at it step by step and find where (and then why) NTP is not working. First, is your internet router able to sync with its source?
    It might help if you would post some details of how NTP is configured.
    HTH
    Rick

  • Changes between a RAC(Objects) and NON RAC

    Hi all,
    I want to findout what all the different things to be considered when an application is made to run on RAC env.
    For eg: I found there is a difference between the way the Sequences are used in a RAC env from Non RAC.
    Are there any guidelines for the Objects used in RAC?
    Also can you point me to any doc related to tuning the interconnect as we are identifying wait events related to cluster "Cluster was consuming significant database time"
    Thanks.

    Hi hyddba,
    Absolutely, at database level for application has no changes at objects.
    At application code has changes to benefit aplications from failover TAF and FAN events.
    http://www.oracle.com/pls/db102/to_toc?pathname=rac.102%2Fb28759%2Ftoc.htm&remark=portal+%28Getting+Started%29
    Regards,
    Rodrigo Mufalani
    http://mufalani.blogspot.com

  • What difference between Oracle 9i AS and orion application server?

    Hi:
    Today I visited some website and read an information that Oracle 9i AS and orion application server are two differece application server.But When I start Oracle 9i AS ,I must use command of "java -jar orion.jar".Are they the same application server? If not ,can you tell me what difference?
    Thanks
    Best regards,
    hyson

    Hi Liu,
    I'm sure other people will coreect any errors I am about to make
    (if I make any :-), but some time ago, Oracle mad a licensing
    agreement with a company called IronFlare, regarding IronFlare's
    application server product called OrionServer. After that, Oracle
    came out with a new product -- Oracle Containers for Java (OC4J)
    -- which is based on OrionServer. In the first version (that had
    the version number 1.0.2.2), the application server basically came
    bundled in the "orion.jar" file, so in order to start up the application
    server, you used a command like:
    java -jar orion.jar
    However, the next version of OC4J (with version number 9.0.2.0.0
    [go figure ;-]), contained the "oc4j.jar" file (which replaced
    the "orion.jar" file).
    So I would say that the first version of OC4J was almost identical
    to OrionServer. But I think subsequent versions are becoming more
    and more different. Remember that at the same time, OrionServer
    is also still being developed. I think the first version of OC4J
    was based on version 1.5.2 of OrionServer. The next version of
    OrionServer (that should be released soon) is version 1.6.0.
    I have no idea how similar the latest version of OrionServer is
    to the latest version of OC4J. But if Oracle's history is any
    guide, then I would say that, eventually, OC4J and OrionServer
    will have very little similarity between them. Just look at the
    paths that Oracle's JDeveloper has taken in comparison with Borland's
    JBuilder. Originally, JDeveloper was based on JBuilder. Today,
    they are two completely different products.
    Hope this has helped you.
    Good Luck,
    Avi.

  • URL rewriting format changed between WL 6.1 and WL 4.5.1

              WL 4.5.1 URL rewriting format:
              http://localhost:7001/servlet/testServlet?param1=value&jsessionid=PEahG4NSx011A7rL7wFHln8UUZrxKfBqnrJaFzrSJUFUCVUu6B9j|5623210349542547250/-2126769903/5/7001/7001/7002/7002/-1
              WL 6.1 URL rewriting format:
              http://localhost:7001/servlet/testServlet;jsessionid=PEahG4NSx011A7rL7wFHln8UUZrxKfBqnrJaFzrSJUFUCVUu6B9j|5623210349542547250/-2126769903/5/7001/7001/7002/7002/-1?param1=value
              Our applet has problems with the new format.
              Is it possible to configure the format of 6.1 to the format like in 4.5.1?
              Thanks for your help
              Michael
              

    perhaps you could implement a filter that intercepts the applet call to your
              servlet and change the url in the filter to the wl6.1 format?
              If this worked you wouldnt have to change your applet code
              "Michael Koch" <[email protected]> wrote in message
              news:[email protected]...
              >
              > The applet-problem is not a general problem with the spec. In some cases
              our applet
              > creates a URL encoded string, mean it appends the session id as a
              key/value. With
              > this changes we must change this and so a new applet must be delivered to
              our
              > customers.
              >
              > Michael
              >
              > "Eric Gross" <[email protected]> wrote:
              > >This new format is what is needed to be compliant with the spec.
              > >
              > >The spec says that the jsessionid needs to be PATH encoded, which means
              > >using the ";".
              > >
              > >How is this causing problems with your applet?
              > >
              > >Eric
              > >
              > >"Michael Koch" <[email protected]> wrote in message
              > >news:[email protected]...
              > >>
              > >> WL 4.5.1 URL rewriting format:
              > >> ------------------------------
              > >>
              >
              >http://localhost:7001/servlet/testServlet?param1=value&jsessionid=PEahG4NSx
              0
              >
              >11A7rL7wFHln8UUZrxKfBqnrJaFzrSJUFUCVUu6B9j|5623210349542547250/-2126769903/
              5
              > >/7001/7001/7002/7002/-1
              > >>
              > >> WL 6.1 URL rewriting format:
              > >> ----------------------------
              > >>
              >
              >http://localhost:7001/servlet/testServlet;jsessionid=PEahG4NSx011A7rL7wFHln
              8
              >
              >UUZrxKfBqnrJaFzrSJUFUCVUu6B9j|5623210349542547250/-2126769903/5/7001/7001/7
              0
              > >02/7002/-1?param1=value
              > >>
              > >> Our applet has problems with the new format.
              > >> Is it possible to configure the format of 6.1 to the format like in
              > >4.5.1?
              > >>
              > >> Thanks for your help
              > >> Michael
              > >
              > >
              >
              

  • Print as Image changes between Adobe Reader ver7 and ver8+

    Hi,
    We have customers that upgraded to Adobe Reader ver8+ and are now experiencing printing issues with our printer driver (operating system is Windows XP/Vista). When they use Adobe Reader ver8 and above to print their PDF files, with "Print as Image" option selected, the print output is smaller. It looks like the latest version of Adobe Reader output the images using a square DPI. Our printer (line matrix) does not handle square DPI (for example: printer resolution are 120x48, 120x72, 120x144, and 180x96).
    Our printer driver just takes the output from the Microsoft print spooler and just encapsulate it with our printer language. We don't do any image manipulation. So, I would like to know was there a change in the way Adobe Reader version 8 and above create the output image? If so, is there a backward compatibility switch our driver can issue during the printing function?
    I tried talking to Adobe Tech support (bronze support), but they only handle end user issues. Is there a tech support option that I can purchase that will allow me to get to the root of this driver compatibility issue? Any suggestion would be appreciated.

    Adobe doesn't apparently care. I get this problem all the time on our work network. There's a lot of questions in this forum and elsewhere on the internet.
    The best answer I've seen is that there's something wrong with the PDF or you don't have the right font, or you did something wrong, or here try this ridiculously complicated workaround. I wish they would just fix their program!
    Suggestions: go through all the "standard" things like updating printer drivers, printing the document as an image, updating Adobe (yeah, like "it works now" is a new feature in the latest version), etc. It's possible that could fix the problem. Otherwise, wait until Adobe releases a version of Reader that doesn't have this issue.

  • Whats difference between dba_segments in 10g and 11.2

    Hi Everyone,
    The Space related Queries on DBA_SEGMENTS on 10g is running for more than 10 minutes and the same queries running within 2 seconds 11.2 for same database..
    Please some one can explain the differences between 10g and 11.2 on this and is there any improvements in LMT tablespaces in 11.2 because this is issue related to LMT.
    Thanks
    Vijay

    *10.2.0.4*
    SQL> explain plan for
      2  select owner owner, segment_name segment, a.tablespace_name name, a.next_extent next_extent, a.next_extent/1024/1024 MB, sum(floor(b.bytes/a.next_extent)) avail_extents from dba_SEGMENTS a, dba_FREE_SPACE b where a.tablespace_name = b.tablespace_name   and a.next_extent>0 group by owner, segment_name,a.tablespace_name, a.next_extent having sum(floor(b.bytes/a.next_extent)) < 8 order by 3,6;
    Explained.
    Elapsed: 00:00:00.45
    SQL> select * from table(dbms_xplan.display());
    PLAN_TABLE_OUTPUT
    Plan hash value: 3420003334
    | Id  | Operation                           | Name             | Rows  | Bytes | Cost (%CPU)| Time     |
    |   0 | SELECT STATEMENT                    |                  |    42 |  4998 | 20360  (91)| 00:03:37 |
    |   1 |  SORT ORDER BY                      |                  |    42 |  4998 | 20360  (91)| 00:03:37 |
    |*  2 |   FILTER                            |                  |       |       |            |          |
    |   3 |    HASH GROUP BY                    |                  |    42 |  4998 | 20360  (91)| 00:03:37 |
    |*  4 |     HASH JOIN                       |                  |    42 |  4998 | 20358  (91)| 00:03:37 |
    |   5 |      VIEW                           | SYS_DBA_SEGS     |     3 |   267 |  1520   (1)| 00:00:17 |
    |   6 |       UNION-ALL                     |                  |       |       |            |          |
    |   7 |        NESTED LOOPS OUTER           |                  |     1 |   291 |  1322   (1)| 00:00:15 |
    |   8 |         NESTED LOOPS                |                  |     1 |   261 |  1321   (1)| 00:00:15 |
    |   9 |          NESTED LOOPS               |                  |     1 |   205 |  1320   (1)| 00:00:15 |
    |* 10 |           HASH JOIN                 |                  |     4 |   596 |  1319   (1)| 00:00:15 |
    |  11 |            NESTED LOOPS             |                  |    19 |  1729 |   156   (0)| 00:00:02 |
    |  12 |             TABLE ACCESS FULL       | FILE$            |    77 |  2002 |     2   (0)| 00:00:01 |
    |  13 |             TABLE ACCESS CLUSTER    | SEG$             |     1 |    65 |     2   (0)| 00:00:01 |
    |* 14 |              INDEX RANGE SCAN       | I_FILE#_BLOCK#   |    15 |       |     1   (0)| 00:00:01 |
    |  15 |            VIEW                     | SYS_OBJECTS      | 30274 |  1714K|  1162   (1)| 00:00:13 |
    |  16 |             UNION-ALL               |                  |       |       |            |          |
    |* 17 |              TABLE ACCESS FULL      | TAB$             |  3109 |   197K|   272   (1)| 00:00:03 |
    |  18 |              TABLE ACCESS FULL      | TABPART$         |   354 | 18408 |     3   (0)| 00:00:01 |
    |  19 |              TABLE ACCESS FULL      | CLU$             |    65 |  3380 |   272   (1)| 00:00:03 |
    |* 20 |              TABLE ACCESS FULL      | IND$             |  7364 |   467K|   272   (1)| 00:00:03 |
    |  21 |              TABLE ACCESS FULL      | INDPART$         |   970 | 50440 |     5   (0)| 00:00:01 |
    |* 22 |              TABLE ACCESS FULL      | LOB$             |  1997 |   126K|   272   (1)| 00:00:03 |
    |  23 |              TABLE ACCESS FULL      | TABSUBPART$      |  1000 | 52000 |     6   (0)| 00:00:01 |
    |  24 |              TABLE ACCESS FULL      | INDSUBPART$      | 15382 |   781K|    58   (2)| 00:00:01 |
    |  25 |              TABLE ACCESS FULL      | LOBFRAG$         |    33 |  1782 |     2   (0)| 00:00:01 |
    |* 26 |           TABLE ACCESS CLUSTER      | TS$              |     1 |    56 |     1   (0)| 00:00:01 |
    |* 27 |            INDEX UNIQUE SCAN        | I_TS#            |     1 |       |     0   (0)| 00:00:01 |
    |* 28 |          TABLE ACCESS BY INDEX ROWID| OBJ$             |     1 |    56 |     1   (0)| 00:00:01 |
    |* 29 |           INDEX UNIQUE SCAN         | I_OBJ1           |     1 |       |     0   (0)| 00:00:01 |
    |  30 |         TABLE ACCESS CLUSTER        | USER$            |     1 |    30 |     1   (0)| 00:00:01 |
    |* 31 |          INDEX UNIQUE SCAN          | I_USER#          |     1 |       |     0   (0)| 00:00:01 |
    |  32 |        NESTED LOOPS                 |                  |     1 |   246 |    75   (0)| 00:00:01 |
    |  33 |         NESTED LOOPS OUTER          |                  |     1 |   203 |    74   (0)| 00:00:01 |
    |  34 |          NESTED LOOPS               |                  |     1 |   173 |    73   (0)| 00:00:01 |
    |  35 |           NESTED LOOPS              |                  |    71 |  6745 |     2   (0)| 00:00:01 |
    |* 36 |            TABLE ACCESS FULL        | UNDO$            |    76 |  5244 |     2   (0)| 00:00:01 |
    |* 37 |            INDEX UNIQUE SCAN        | I_FILE2          |     1 |    26 |     0   (0)| 00:00:01 |
    |* 38 |           TABLE ACCESS CLUSTER      | SEG$             |     1 |    78 |     1   (0)| 00:00:01 |
    |* 39 |            INDEX UNIQUE SCAN        | I_FILE#_BLOCK#   |     1 |       |     0   (0)| 00:00:01 |
    |  40 |          TABLE ACCESS CLUSTER       | USER$            |     1 |    30 |     1   (0)| 00:00:01 |
    |* 41 |           INDEX UNIQUE SCAN         | I_USER#          |     1 |       |     0   (0)| 00:00:01 |
    |* 42 |         TABLE ACCESS CLUSTER        | TS$              |     1 |    43 |     1   (0)| 00:00:01 |
    |* 43 |          INDEX UNIQUE SCAN          | I_TS#            |     1 |       |     0   (0)| 00:00:01 |
    |  44 |        NESTED LOOPS                 |                  |     1 |   203 |   123   (0)| 00:00:02 |
    |  45 |         NESTED LOOPS OUTER          |                  |     1 |   147 |   122   (0)| 00:00:02 |
    |  46 |          NESTED LOOPS               |                  |     1 |   117 |   121   (0)| 00:00:02 |
    |  47 |           TABLE ACCESS FULL         | FILE$            |    77 |  3003 |     2   (0)| 00:00:01 |
    |* 48 |           TABLE ACCESS CLUSTER      | SEG$             |     1 |    78 |     2   (0)| 00:00:01 |
    |* 49 |            INDEX RANGE SCAN         | I_FILE#_BLOCK#   |    15 |       |     1   (0)| 00:00:01 |
    |  50 |          TABLE ACCESS CLUSTER       | USER$            |     1 |    30 |     1   (0)| 00:00:01 |
    |* 51 |           INDEX UNIQUE SCAN         | I_USER#          |     1 |       |     0   (0)| 00:00:01 |
    |* 52 |         TABLE ACCESS CLUSTER        | TS$              |     1 |    56 |     1   (0)| 00:00:01 |
    |* 53 |          INDEX UNIQUE SCAN          | I_TS#            |     1 |       |     0   (0)| 00:00:01 |
    |  54 |      VIEW                           | DBA_FREE_SPACE   |  1393 | 41790 | 18837  (99)| 00:03:21 |
    |  55 |       UNION-ALL                     |                  |       |       |            |          |
    |  56 |        NESTED LOOPS                 |                  |     1 |   121 |    11   (0)| 00:00:01 |
    |  57 |         NESTED LOOPS                |                  |     1 |    65 |    10   (0)| 00:00:01 |
    |  58 |          TABLE ACCESS FULL          | FET$             |     1 |    39 |    10   (0)| 00:00:01 |
    |* 59 |          INDEX UNIQUE SCAN          | I_FILE2          |     1 |    26 |     0   (0)| 00:00:01 |
    |* 60 |         TABLE ACCESS CLUSTER        | TS$              |     1 |    56 |     1   (0)| 00:00:01 |
    |  61 |        NESTED LOOPS                 |                  |  1377 |   158K|    58  (83)| 00:00:01 |
    |  62 |         NESTED LOOPS                |                  | 72400 |  6504K|    41  (76)| 00:00:01 |
    |* 63 |          TABLE ACCESS FULL          | TS$              |    54 |  4428 |    10   (0)| 00:00:01 |
    |* 64 |          FIXED TABLE FIXED INDEX    | X$KTFBFE (ind:1) |  1342 | 13420 |     1 (100)| 00:00:01 |
    |* 65 |         INDEX UNIQUE SCAN           | I_FILE2          |     1 |    26 |     0   (0)| 00:00:01 |
    |  66 |        NESTED LOOPS                 |                  |    14 |  2324 | 18498 (100)| 00:03:18 |
    |  67 |         NESTED LOOPS                |                  |   640 | 89600 | 18498 (100)| 00:03:18 |
    |* 68 |          HASH JOIN                  |                  |   640 | 77440 |    59   (2)| 00:00:01 |
    |  69 |           TABLE ACCESS FULL         | RECYCLEBIN$      |   651 | 25389 |    48   (0)| 00:00:01 |
    |* 70 |           TABLE ACCESS FULL         | TS$              |    54 |  4428 |    10   (0)| 00:00:01 |
    |* 71 |          FIXED TABLE FIXED INDEX    | X$KTFBUE (ind:1) |     1 |    19 |    29 (100)| 00:00:01 |
    |* 72 |         INDEX UNIQUE SCAN           | I_FILE2          |     1 |    26 |     0   (0)| 00:00:01 |
    |* 73 |        HASH JOIN                    |                  |     1 |   173 |   270   (1)| 00:00:03 |
    |  74 |         NESTED LOOPS                |                  |     1 |   134 |   221   (1)| 00:00:03 |
    |  75 |          NESTED LOOPS               |                  |     1 |    78 |   220   (1)| 00:00:03 |
    |  76 |           TABLE ACCESS FULL         | UET$             |     1 |    52 |   220   (1)| 00:00:03 |
    |* 77 |           INDEX UNIQUE SCAN         | I_FILE2          |     1 |    26 |     0   (0)| 00:00:01 |
    |* 78 |          TABLE ACCESS CLUSTER       | TS$              |     1 |    56 |     1   (0)| 00:00:01 |
    |* 79 |           INDEX UNIQUE SCAN         | I_TS#            |     1 |       |     0   (0)| 00:00:01 |
    |  80 |         TABLE ACCESS FULL           | RECYCLEBIN$      |   651 | 25389 |    48   (0)| 00:00:01 |
    Predicate Information (identified by operation id):
       2 - filter(SUM(FLOOR("B"."BYTES"/"NEXT_EXTENT"))<8)
       4 - access("TABLESPACE_NAME"="B"."TABLESPACE_NAME")
      10 - access("S"."FILE#"="SO"."HEADER_FILE" AND "S"."BLOCK#"="SO"."HEADER_BLOCK" AND
                  "S"."TS#"="SO"."TS_NUMBER" AND "S"."TYPE#"="SO"."SEGMENT_TYPE_ID")
      14 - access("S"."TS#"="F"."TS#" AND "S"."FILE#"="F"."RELFILE#")
      17 - filter(BITAND("T"."PROPERTY",1024)=0)
      20 - filter("I"."TYPE#"=1 OR "I"."TYPE#"=2 OR "I"."TYPE#"=3 OR "I"."TYPE#"=4 OR "I"."TYPE#"=6
                  OR "I"."TYPE#"=7 OR "I"."TYPE#"=8 OR "I"."TYPE#"=9)
      22 - filter(BITAND("L"."PROPERTY",64)=0 OR BITAND("L"."PROPERTY",128)=128)
      26 - filter(DECODE(BITAND("TS"."FLAGS",3),1,TO_NUMBER(NULL),"S"."EXTSIZE"*"TS"."BLOCKSIZE")>0)
      27 - access("S"."TS#"="TS"."TS#")
      28 - filter("O"."TYPE#"="SO"."OBJECT_TYPE_ID")
      29 - access("O"."OBJ#"="SO"."OBJECT_ID")
      31 - access("O"."OWNER#"="U"."USER#"(+))
      36 - filter("UN"."STATUS$"<>1)
      37 - access("UN"."TS#"="F"."TS#" AND "UN"."FILE#"="F"."RELFILE#")
      38 - filter("S"."TYPE#"=1 OR "S"."TYPE#"=10)
      39 - access("S"."TS#"="UN"."TS#" AND "S"."FILE#"="UN"."FILE#" AND "S"."BLOCK#"="UN"."BLOCK#")
      41 - access("S"."USER#"="U"."USER#"(+))
      42 - filter("S"."EXTSIZE"*"TS"."BLOCKSIZE">0)
      43 - access("S"."TS#"="TS"."TS#")
      48 - filter("S"."TYPE#"<>1 AND "S"."TYPE#"<>5 AND "S"."TYPE#"<>6 AND "S"."TYPE#"<>8 AND
                  "S"."TYPE#"<>10)
      49 - access("S"."TS#"="F"."TS#" AND "S"."FILE#"="F"."RELFILE#")
      51 - access("S"."USER#"="U"."USER#"(+))
      52 - filter(DECODE(BITAND("TS"."FLAGS",3),1,TO_NUMBER(NULL),"S"."EXTSIZE"*"TS"."BLOCKSIZE")>0)
      53 - access("S"."TS#"="TS"."TS#")
      59 - access("F"."TS#"="FI"."TS#" AND "F"."FILE#"="FI"."RELFILE#")
      60 - filter("TS"."BITMAPPED"=0 AND "TS"."TS#"="F"."TS#")
      63 - filter(("TS"."ONLINE$"=1 OR "TS"."ONLINE$"=4) AND "TS"."CONTENTS$"=0 AND
                  "TS"."BITMAPPED"<>0)
      64 - filter("TS"."TS#"="F"."KTFBFETSN")
      65 - access("F"."KTFBFETSN"="FI"."TS#" AND "F"."KTFBFEFNO"="FI"."RELFILE#")
      68 - access("TS"."TS#"="RB"."TS#")
      70 - filter(("TS"."ONLINE$"=1 OR "TS"."ONLINE$"=4) AND "TS"."CONTENTS$"=0 AND
                  "TS"."BITMAPPED"<>0)
      71 - filter("U"."KTFBUESEGTSN"="RB"."TS#" AND "U"."KTFBUESEGFNO"="RB"."FILE#" AND
                  "U"."KTFBUESEGBNO"="RB"."BLOCK#")
      72 - access("RB"."TS#"="FI"."TS#" AND "U"."KTFBUEFNO"="FI"."RELFILE#")
      73 - access("U"."TS#"="RB"."TS#" AND "U"."SEGFILE#"="RB"."FILE#" AND
                  "U"."SEGBLOCK#"="RB"."BLOCK#")
      77 - access("U"."TS#"="FI"."TS#" AND "U"."SEGFILE#"="FI"."RELFILE#")
      78 - filter("TS"."BITMAPPED"=0)
      79 - access("TS"."TS#"="U"."TS#")
    11.2
    SQL> explain plan for
      2   select owner owner, segment_name segment, a.tablespace_name name, a.next_extent next_extent, a.next_extent/1024/1024 MB, sum(floor(b.bytes/a.next_extent)) avail_extents from dba_SEGMENTS a, dba_FREE_SPACE b where a.tablespace_name = b.tablespace_name   and a.next_extent>0 group by owner, segment_name,a.tablespace_name, a.next_extent having sum(floor(b.bytes/a.next_extent)) < 8 order by 3,6;
    Explained.
    SQL>  select * from table(dbms_xplan.display());
    PLAN_TABLE_OUTPUT
    Plan hash value: 1346760999
    | Id  | Operation                            | Name             | Rows  | Bytes | Cost (%CPU)| Time     |
    |   0 | SELECT STATEMENT                     |                  |     3 |   333 |  1481   (1)| 00:00:27 |
    |   1 |  SORT ORDER BY                       |                  |     3 |   333 |  1481   (1)| 00:00:27 |
    |*  2 |   FILTER                             |                  |       |       |            |          |
    |   3 |    HASH GROUP BY                     |                  |     3 |   333 |  1481   (1)| 00:00:27 |
    |*  4 |     HASH JOIN                        |                  |  8243 |   893K|  1479   (1)| 00:00:27 |
    |   5 |      VIEW                            | DBA_FREE_SPACE   |   101 |  2626 |    55  (11)| 00:00:01 |
    |   6 |       UNION-ALL                      |                  |       |       |            |          |
    |   7 |        NESTED LOOPS                  |                  |     1 |    69 |     7   (0)| 00:00:01 |
    |   8 |         NESTED LOOPS                 |                  |     1 |    45 |     6   (0)| 00:00:01 |
    |   9 |          TABLE ACCESS FULL           | FET$             |     1 |    39 |     6   (0)| 00:00:01 |
    |* 10 |          INDEX UNIQUE SCAN           | I_FILE2          |     1 |     6 |     0   (0)| 00:00:01 |
    |* 11 |         TABLE ACCESS CLUSTER         | TS$              |     1 |    24 |     1   (0)| 00:00:01 |
    |  12 |        NESTED LOOPS                  |                  |    98 |  7350 |    33   (0)| 00:00:01 |
    |  13 |         NESTED LOOPS                 |                  |    98 |  6762 |    33   (0)| 00:00:01 |
    |* 14 |          TABLE ACCESS FULL           | TS$              |    59 |  1770 |    33   (0)| 00:00:01 |
    |* 15 |          FIXED TABLE FIXED INDEX     | X$KTFBFE (ind:1) |     2 |    78 |     0   (0)| 00:00:01 |
    |* 16 |         INDEX UNIQUE SCAN            | I_FILE2          |     1 |     6 |     0   (0)| 00:00:01 |
    |  17 |        NESTED LOOPS                  |                  |     1 |   140 |    10  (60)| 00:00:01 |
    |  18 |         NESTED LOOPS                 |                  |     1 |   134 |    10  (60)| 00:00:01 |
    |  19 |          NESTED LOOPS                |                  |     1 |    69 |     4   (0)| 00:00:01 |
    |  20 |           TABLE ACCESS FULL          | RECYCLEBIN$      |     1 |    39 |     3   (0)| 00:00:01 |
    |* 21 |           TABLE ACCESS CLUSTER       | TS$              |     1 |    30 |     1   (0)| 00:00:01 |
    |* 22 |            INDEX UNIQUE SCAN         | I_TS#            |     1 |       |     0   (0)| 00:00:01 |
    |* 23 |          FIXED TABLE FIXED INDEX     | X$KTFBUE (ind:1) |   100K|  6347K|     6 (100)| 00:00:01 |
    |* 24 |         INDEX UNIQUE SCAN            | I_FILE2          |     1 |     6 |     0   (0)| 00:00:01 |
    |  25 |        NESTED LOOPS                  |                  |     1 |   121 |     5   (0)| 00:00:01 |
    |  26 |         NESTED LOOPS                 |                  |     1 |    97 |     4   (0)| 00:00:01 |
    |  27 |          MERGE JOIN CARTESIAN        |                  |     1 |    45 |     4   (0)| 00:00:01 |
    |  28 |           TABLE ACCESS FULL          | RECYCLEBIN$      |     1 |    39 |     3   (0)| 00:00:01 |
    |  29 |           BUFFER SORT                |                  |    78 |   468 |     1   (0)| 00:00:01 |
    |  30 |            INDEX FULL SCAN           | I_FILE2          |    78 |   468 |     1   (0)| 00:00:01 |
    |  31 |          TABLE ACCESS CLUSTER        | UET$             |     1 |    52 |     0   (0)| 00:00:01 |
    |* 32 |           INDEX UNIQUE SCAN          | I_FILE#_BLOCK#   |     1 |       |     0   (0)| 00:00:01 |
    |* 33 |         TABLE ACCESS CLUSTER         | TS$              |     1 |    24 |     1   (0)| 00:00:01 |
    |* 34 |          INDEX UNIQUE SCAN           | I_TS#            |     1 |       |     0   (0)| 00:00:01 |
    |  35 |      VIEW                            | SYS_DBA_SEGS     |  4897 |   406K|  1423   (1)| 00:00:26 |
    |  36 |       UNION-ALL                      |                  |       |       |            |          |
    |  37 |        NESTED LOOPS OUTER            |                  |     1 |   158 |  1128   (1)| 00:00:21 |
    |  38 |         NESTED LOOPS                 |                  |     1 |   141 |  1127   (1)| 00:00:21 |
    |  39 |          NESTED LOOPS                |                  |     1 |   120 |  1126   (1)| 00:00:21 |
    |* 40 |           HASH JOIN                  |                  |     3 |   246 |  1120   (1)| 00:00:21 |
    |  41 |            NESTED LOOPS              |                  | 36056 |   845K|   122   (0)| 00:00:03 |
    |  42 |             INDEX FULL SCAN          | I_FILE2          |    78 |   468 |     1   (0)| 00:00:01 |
    |  43 |             TABLE ACCESS CLUSTER     | SEG$             |   462 |  8316 |     2   (0)| 00:00:01 |
    |* 44 |              INDEX RANGE SCAN        | I_FILE#_BLOCK#   |     1 |       |     1   (0)| 00:00:01 |
    |  45 |            VIEW                      | SYS_OBJECTS      | 39147 |  2217K|   997   (1)| 00:00:18 |
    |  46 |             UNION-ALL                |                  |       |       |            |          |
    |* 47 |              TABLE ACCESS FULL       | TAB$             |  4543 |   102K|   237   (0)| 00:00:05 |
    |  48 |              TABLE ACCESS FULL       | TABPART$         |   424 |  6784 |     4   (0)| 00:00:01 |
    |  49 |              TABLE ACCESS FULL       | CLU$             |    10 |   140 |   237   (0)| 00:00:05 |
    |* 50 |              TABLE ACCESS FULL       | IND$             | 11060 |   205K|   237   (0)| 00:00:05 |
    |  51 |              TABLE ACCESS FULL       | INDPART$         |   587 |  9392 |     5   (0)| 00:00:01 |
    |* 52 |              TABLE ACCESS FULL       | LOB$             |   938 | 17822 |   234   (0)| 00:00:05 |
    |  53 |              TABLE ACCESS FULL       | TABSUBPART$      |   968 | 15488 |     5   (0)| 00:00:01 |
    |  54 |              TABLE ACCESS FULL       | INDSUBPART$      | 20616 |   322K|    33   (0)| 00:00:01 |
    |  55 |              TABLE ACCESS FULL       | LOBFRAG$         |     1 |    17 |     3   (0)| 00:00:01 |
    |  56 |           TABLE ACCESS BY INDEX ROWID| OBJ$             |     1 |    38 |     2   (0)| 00:00:01 |
    |* 57 |            INDEX RANGE SCAN          | I_OBJ1           |     1 |       |     1   (0)| 00:00:01 |
    |* 58 |          TABLE ACCESS CLUSTER        | TS$              |     1 |    21 |     1   (0)| 00:00:01 |
    |* 59 |           INDEX UNIQUE SCAN          | I_TS#            |     1 |       |     0   (0)| 00:00:01 |
    |  60 |         TABLE ACCESS CLUSTER         | USER$            |     1 |    17 |     1   (0)| 00:00:01 |
    |* 61 |          INDEX UNIQUE SCAN           | I_USER#          |     1 |       |     0   (0)| 00:00:01 |
    |* 62 |        HASH JOIN OUTER               |                  |    21 |  2121 |   133   (1)| 00:00:03 |
    |  63 |         NESTED LOOPS                 |                  |    21 |  1764 |   128   (0)| 00:00:03 |
    |  64 |          NESTED LOOPS                |                  |    21 |  1323 |   107   (0)| 00:00:02 |
    |  65 |           NESTED LOOPS               |                  |    21 |  1197 |   107   (0)| 00:00:02 |
    |* 66 |            TABLE ACCESS FULL         | UNDO$            |   104 |  3640 |     3   (0)| 00:00:01 |
    |* 67 |            TABLE ACCESS CLUSTER      | SEG$             |     1 |    22 |     1   (0)| 00:00:01 |
    |* 68 |             INDEX UNIQUE SCAN        | I_FILE#_BLOCK#   |     1 |       |     0   (0)| 00:00:01 |
    |* 69 |           INDEX UNIQUE SCAN          | I_FILE2          |     1 |     6 |     0   (0)| 00:00:01 |
    |* 70 |          TABLE ACCESS CLUSTER        | TS$              |     1 |    21 |     1   (0)| 00:00:01 |
    |* 71 |           INDEX UNIQUE SCAN          | I_TS#            |     1 |       |     0   (0)| 00:00:01 |
    |  72 |         TABLE ACCESS FULL            | USER$            |   111 |  1887 |     4   (0)| 00:00:01 |
    |* 73 |        HASH JOIN RIGHT OUTER         |                  |  4875 |   328K|   162   (1)| 00:00:03 |
    |  74 |         TABLE ACCESS FULL            | USER$            |   111 |  1887 |     4   (0)| 00:00:01 |
    |* 75 |         HASH JOIN                    |                  |  4875 |   247K|   158   (1)| 00:00:03 |
    |  76 |          TABLE ACCESS FULL           | TS$              |    60 |  1260 |    33   (0)| 00:00:01 |
    |  77 |          NESTED LOOPS                |                  |  4875 |   147K|   124   (0)| 00:00:03 |
    |  78 |           TABLE ACCESS FULL          | FILE$            |    78 |   702 |     3   (0)| 00:00:01 |
    |* 79 |           TABLE ACCESS CLUSTER       | SEG$             |    62 |  1364 |     2   (0)| 00:00:01 |
    |* 80 |            INDEX RANGE SCAN          | I_FILE#_BLOCK#   |     1 |       |     1   (0)| 00:00:01 |
    Predicate Information (identified by operation id):
       2 - filter(SUM(FLOOR("B"."BYTES"/"NEXT_EXTENT"))<8)
       4 - access("TABLESPACE_NAME"="B"."TABLESPACE_NAME")
      10 - access("F"."TS#"="FI"."TS#" AND "F"."FILE#"="FI"."RELFILE#")
      11 - filter("TS"."BITMAPPED"=0 AND "TS"."TS#"="F"."TS#")
      14 - filter("TS"."CONTENTS$"=0 AND "TS"."BITMAPPED"<>0 AND ("TS"."ONLINE$"=1 OR
                  "TS"."ONLINE$"=4))
      15 - filter("TS"."TS#"="F"."KTFBFETSN")
      16 - access("F"."KTFBFETSN"="FI"."TS#" AND "F"."KTFBFEFNO"="FI"."RELFILE#")
      21 - filter("TS"."CONTENTS$"=0 AND "TS"."BITMAPPED"<>0 AND ("TS"."ONLINE$"=1 OR
                  "TS"."ONLINE$"=4))
      22 - access("TS"."TS#"="RB"."TS#")
      23 - filter("U"."KTFBUESEGTSN"="RB"."TS#" AND "U"."KTFBUESEGFNO"="RB"."FILE#" AND
                  "U"."KTFBUESEGBNO"="RB"."BLOCK#")
      24 - access("RB"."TS#"="FI"."TS#" AND "U"."KTFBUEFNO"="FI"."RELFILE#")
      32 - access("U"."TS#"="RB"."TS#" AND "U"."SEGFILE#"="RB"."FILE#" AND
                  "U"."SEGBLOCK#"="RB"."BLOCK#")
           filter("U"."TS#"="FI"."TS#" AND "U"."SEGFILE#"="FI"."RELFILE#")
      33 - filter("TS"."BITMAPPED"=0)
      34 - access("TS"."TS#"="U"."TS#")
      40 - access("S"."FILE#"="SO"."HEADER_FILE" AND "S"."BLOCK#"="SO"."HEADER_BLOCK" AND
                  "S"."TS#"="SO"."TS_NUMBER" AND "S"."TYPE#"="SO"."SEGMENT_TYPE_ID")
      44 - access("S"."TS#"="F"."TS#" AND "S"."FILE#"="F"."RELFILE#")
      47 - filter(BITAND("T"."PROPERTY",1024)=0)
      50 - filter("I"."TYPE#"=1 OR "I"."TYPE#"=2 OR "I"."TYPE#"=3 OR "I"."TYPE#"=4 OR "I"."TYPE#"=6
                  OR "I"."TYPE#"=7 OR "I"."TYPE#"=8 OR "I"."TYPE#"=9)
      52 - filter(BITAND("L"."PROPERTY",64)=0 OR BITAND("L"."PROPERTY",128)=128)
      57 - access("O"."OBJ#"="SO"."OBJECT_ID" AND "O"."TYPE#"="SO"."OBJECT_TYPE_ID")
           filter("O"."TYPE#"="SO"."OBJECT_TYPE_ID")
      58 - filter("S"."EXTSIZE"*"TS"."BLOCKSIZE">0)
      59 - access("S"."TS#"="TS"."TS#")
      61 - access("O"."OWNER#"="U"."USER#"(+))
      62 - access("S"."USER#"="U"."USER#"(+))
      66 - filter("UN"."STATUS$"<>1)
      67 - filter("S"."TYPE#"=1 OR "S"."TYPE#"=10)
      68 - access("S"."TS#"="UN"."TS#" AND "S"."FILE#"="UN"."FILE#" AND "S"."BLOCK#"="UN"."BLOCK#")
      69 - access("UN"."TS#"="F"."TS#" AND "UN"."FILE#"="F"."RELFILE#")
      70 - filter("S"."EXTSIZE"*"TS"."BLOCKSIZE">0)
      71 - access("S"."TS#"="TS"."TS#")
      73 - access("S"."USER#"="U"."USER#"(+))
      75 - access("S"."TS#"="TS"."TS#")
           filter("S"."EXTSIZE"*"TS"."BLOCKSIZE">0)
      79 - filter("S"."TYPE#"<>6 AND "S"."TYPE#"<>5 AND "S"."TYPE#"<>8 AND "S"."TYPE#"<>10 AND
                  "S"."TYPE#"<>1)
      80 - access("S"."TS#"="F"."TS#" AND "S"."FILE#"="F"."RELFILE#")
    135 rows selected.
    SQL>

  • What difference between Jtextfield of Swing and Textfield of awt.

    when we press enter key in a textfield for TextField an action is
    occur than what method is called and tell me JtextField does not
    support enter key action.??
    Plz tell me about public boolean handleEvent(Event e){}.
    Infact i want to display internationlized text in textfield.with
    JTextfield after installing desired font and setting font i hv been succeeded to display in JTextfield what i want but since TextField is OS
    dependent it is showing me ??.Tell me what should i do bcz JTextfield is not giving me action event and TextField of awt is not giving me internationlized text.I want that TextField of awt should display my internationalized text.Tell me what should i do.I hv tried to set console of command prompt by using chcp command.
    thanx

    Add an ActionListener to the JTextField:
    http://java.sun.com/docs/books/tutorial/uiswing/components/simpletext.html#textfield

  • Cp 8.0.1,What difference between "Publish for Devices" and "Publish for Devices (App) ?

    i think "Publish for Devices" and "Publish for Devices (App). it same.
    "Publish for Devices (App)" for easy connect phonegap.
    "Publish for Devices"  for advance user.
    not sure you understand but i only share.

    Publish for Devices (App) is to publish your captivate project as a native application using PhoneGap API.
    Publish for Devices is the normal html publish but for Responsive project. It will publish your project as html content and later you can upload it on some LMS or WebServer to view the content on devices using Browser. It has not nothing to do about advance users.
    In both the cases the content will change according to the size of the viewing device.

  • JVM critical exception handler changes between 1.4.2_06 and later?

    The Java program I support uses a large amount of C++ code (via JNI). Our user base is large, uses Windows, and is slow to take on new JVM releases. They have been using 1.4.2_06 until last year when they started using 1.4.2_10 (and will soon update to 1.5.x).
    The DLL I include with the program is built debug (/MTd) and I include the PDB file with the Java program. I used to get (w/ 1.4.2_06 and before) function and line number information when the DLL caused an exception outside the VM. Example contents of hs_pidxxx.log file below:
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : EXCEPTION_INT_DIVIDE_BY_ZERO (0xc0000094) occurred at PC=0x3468CFC8
    Function=QCTestDeviceHandler::StartDevice+0x98
    Library=C:\dpdm2\4.3Beta2\dmLite.dll
    Source file = d:\sources\datapro\dvl\wmc\datapro\sources\lib_serialio\qctestdevicehandler.cpp : 599
    Current Java thread:
         at dmLite.QCTestHandler.startDevice(Native Method)
         at dmLite.QCTestHandler.startSelf(QCTestHandler.java:895)
         at dmLite.DmLite.startDataCollection(DmLite.java:4687)
         at dmLite.DpdmGUI.startDataCollection(DpdmGUI.java:1332)
         at dmLite.DpdmGUI.toggleStart(DpdmGUI.java:1394)
         at dmLite.DpdmCommand.actionPerformed(DpdmCommand.java:521)
         at java.awt.Button.processActionEvent(Unknown Source)
         at java.awt.Button.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    With 1.4.2_10 and several 1.5 variants, I don't get function and line number information. Example contents of hs_pid_xxx.log file below (generated from the same deployed file set as above):
    # An unexpected error has been detected by HotSpot Virtual Machine:
    # EXCEPTION_INT_DIVIDE_BY_ZERO (0xc0000094) at pc=0x0311cfc8, pid=1888, tid=1772
    # Java VM: Java HotSpot(TM) Client VM (1.5.0_02-b09 mixed mode, sharing)
    # Problematic frame:
    # C [dmLite.dll+0x5cfc8]
    --------------- T H R E A D ---------------
    Current thread (0x0300f608): JavaThread "AWT-EventQueue-0" [_thread_in_native, id=1772]
    siginfo: ExceptionCode=0xc0000094
    Registers:
    EAX=0x00000004, EBX=0x26af9628, ECX=0x00000000, EDX=0x00000000
    ESP=0x0415f678, EBP=0x0415f6d4, ESI=0x00000004, EDI=0x0300f608
    EIP=0x0311cfc8, EFLAGS=0x00010246
    Top of Stack: (sp=0x0415f678)
    0x0415f678: 0300f608 26af9628 26af9628 0300f608
    0x0415f688: 26af9628 26af9628 0300f608 26af9628
    0x0415f698: 26af9628 00000002 00000001 0415f6d8
    0x0415f6a8: 80000000 6d72b6dc 00000029 0415f6d8
    0x0415f6b8: 6d6a5acf 00000000 6d70b51d 00236140
    0x0415f6c8: 6d6bda93 00a6b54d 039c8258 0415f73c
    0x0415f6d8: 0329a87a 02fa53b8 00000000 0300f608
    0x0415f6e8: 26af9628 26af9628 00001528 00000000
    Instructions: (pc=0x0311cfc8)
    0x0311cfb8: 88 04 0a 00 00 e8 06 a1 fa ff 8b c8 8b c6 33 d2
    0x0311cfc8: f7 f1 89 45 f8 8b 4d fc e8 88 6a fb ff 83 f8 01
    Stack: [0x04120000,0x04160000), sp=0x0415f678, free space=253k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    C [dmLite.dll+0x5cfc8]
    C [dmLite.dll+0x1da87a]
    j dmLite.QCTestHandler.startDevice(Ljava/lang/String;)Z+0
    The 1.4.2_06 feature allowed easier post-mortem diagnosis of end-user detected bugs (because the log file contained exact location of the problem). The new dump format requires me to keep map files, and hand locate the function and line number based on the offsets in the log file.
    Is there any way to get function name and line number information dumped to the log file with the more recent versions?

    The Java program I support uses a large amount of C++ code (via JNI). Our user base is large, uses Windows, and is slow to take on new JVM releases. They have been using 1.4.2_06 until last year when they started using 1.4.2_10 (and will soon update to 1.5.x).
    The DLL I include with the program is built debug (/MTd) and I include the PDB file with the Java program. I used to get (w/ 1.4.2_06 and before) function and line number information when the DLL caused an exception outside the VM. Example contents of hs_pidxxx.log file below:
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : EXCEPTION_INT_DIVIDE_BY_ZERO (0xc0000094) occurred at PC=0x3468CFC8
    Function=QCTestDeviceHandler::StartDevice+0x98
    Library=C:\dpdm2\4.3Beta2\dmLite.dll
    Source file = d:\sources\datapro\dvl\wmc\datapro\sources\lib_serialio\qctestdevicehandler.cpp : 599
    Current Java thread:
         at dmLite.QCTestHandler.startDevice(Native Method)
         at dmLite.QCTestHandler.startSelf(QCTestHandler.java:895)
         at dmLite.DmLite.startDataCollection(DmLite.java:4687)
         at dmLite.DpdmGUI.startDataCollection(DpdmGUI.java:1332)
         at dmLite.DpdmGUI.toggleStart(DpdmGUI.java:1394)
         at dmLite.DpdmCommand.actionPerformed(DpdmCommand.java:521)
         at java.awt.Button.processActionEvent(Unknown Source)
         at java.awt.Button.processEvent(Unknown Source)
         at java.awt.Component.dispatchEventImpl(Unknown Source)
         at java.awt.Component.dispatchEvent(Unknown Source)
         at java.awt.EventQueue.dispatchEvent(Unknown Source)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
         at java.awt.EventDispatchThread.run(Unknown Source)
    With 1.4.2_10 and several 1.5 variants, I don't get function and line number information. Example contents of hs_pid_xxx.log file below (generated from the same deployed file set as above):
    # An unexpected error has been detected by HotSpot Virtual Machine:
    # EXCEPTION_INT_DIVIDE_BY_ZERO (0xc0000094) at pc=0x0311cfc8, pid=1888, tid=1772
    # Java VM: Java HotSpot(TM) Client VM (1.5.0_02-b09 mixed mode, sharing)
    # Problematic frame:
    # C [dmLite.dll+0x5cfc8]
    --------------- T H R E A D ---------------
    Current thread (0x0300f608): JavaThread "AWT-EventQueue-0" [_thread_in_native, id=1772]
    siginfo: ExceptionCode=0xc0000094
    Registers:
    EAX=0x00000004, EBX=0x26af9628, ECX=0x00000000, EDX=0x00000000
    ESP=0x0415f678, EBP=0x0415f6d4, ESI=0x00000004, EDI=0x0300f608
    EIP=0x0311cfc8, EFLAGS=0x00010246
    Top of Stack: (sp=0x0415f678)
    0x0415f678: 0300f608 26af9628 26af9628 0300f608
    0x0415f688: 26af9628 26af9628 0300f608 26af9628
    0x0415f698: 26af9628 00000002 00000001 0415f6d8
    0x0415f6a8: 80000000 6d72b6dc 00000029 0415f6d8
    0x0415f6b8: 6d6a5acf 00000000 6d70b51d 00236140
    0x0415f6c8: 6d6bda93 00a6b54d 039c8258 0415f73c
    0x0415f6d8: 0329a87a 02fa53b8 00000000 0300f608
    0x0415f6e8: 26af9628 26af9628 00001528 00000000
    Instructions: (pc=0x0311cfc8)
    0x0311cfb8: 88 04 0a 00 00 e8 06 a1 fa ff 8b c8 8b c6 33 d2
    0x0311cfc8: f7 f1 89 45 f8 8b 4d fc e8 88 6a fb ff 83 f8 01
    Stack: [0x04120000,0x04160000), sp=0x0415f678, free space=253k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    C [dmLite.dll+0x5cfc8]
    C [dmLite.dll+0x1da87a]
    j dmLite.QCTestHandler.startDevice(Ljava/lang/String;)Z+0
    The 1.4.2_06 feature allowed easier post-mortem diagnosis of end-user detected bugs (because the log file contained exact location of the problem). The new dump format requires me to keep map files, and hand locate the function and line number based on the offsets in the log file.
    Is there any way to get function name and line number information dumped to the log file with the more recent versions?

  • Tab page label color changes between 9.0.4 and 11.1.2

    In Forms 9.0.4, all of my Tab Page Labels were in a black font. When I migrated to version 11.1.2, they are now in a white font. How can I force the font on the tab page labels to be black?
    I tried setting foreground color on the Tab Page to be black, but that didn't help.
    I also tried setting a visual attribute on the Tab Page to one that had a black foreground color, but that also didn't help.
    Any suggestions will be much appreciated.

    I was able to solve the problem by changing the text color directly in the Layout Editor (with the color pickers at the bottom of the left hand toolbar), rather than using the property palette to set this.
    Edited by: cindyconlin on Mar 21, 2013 10:43 AM

  • What changed with sleep between 10.8 and 10.9?

    Prior to Mavericks, sleep mode made sense to me. Hit the button and my iMac went to sleep almost right away. Hit the button again or hit a key on my keyboard and it would wake up almost right away, too. In between those two events, the machine would stay asleep.
    WIth Mavericks, sleep seems to me to be baffling, random, and inscrutable. I cannot make any sense of how it works. The button puts the machine to sleep only if you're logged in. At the login screen you can only click on "Sleep" with the mouse. When you put the machine to sleep it can take several seconds, sometimes almost a minute, before it actually goes to sleep. (It also takes mystifyingly long for logout to complete.) Once the machine is asleep, it can wake up again without me doing anything, sometimes after after only a couple of seconds, other times sometime overnight.
    I have searched around for what is going on, and most of the information I find talks about the reasons why OS X might wake up. That is not my question. My question is: What changed between 10.8 and 10.9 with regard to sleep? I didn't change any settings at all when I upgraded from 10.8 to 10.9, so why did the behavior change (and for the worse, I might add)? Why do I need to go review the half dozen or so settings that are possible causes for spontaneous wake? I had them set the way I like in 10.8. Is there official Apple documentation about how sleep is supposed to behave in Mavericks?
    Thank you for any help you can give me.

    This is always due to a process keeping the system awake, but determining which is the challenge.
    A first simple step is to create a new, temporary user account. Log out of yours and log into the temporary one. Determine if it sleeps then. If it does then you have a login item that is preventing sleep. System Preferences > Users & Groups > Login Items.
    Whenever you suspect a problem related to power, including sleep, an SMC reset is also recommended.
    Active Spotlight indexing will prevent sleep. Wait for it to complete.
    Check your Sharing preferences for anything that could permit an active network connection.
    Energy Saver "Wake for network access" can prevent sleep, but unchecking it will prevent the ability to remotely access a sleeping Mac over a network.
    A normally functioning Mac will sleep according to Energy Saver, but will wake periodically for network access, after which it will return to sleep according to the settings in Energy Saver.
    Check Energy Saver > Power Nap. Whatever its setting happens to be, change it. Power Nap itself does not prevent sleep, but a corrupted Power Nap setting might. Changing its setting might correct it.
    Unfinished print jobs will prevent sleep. If a print job is queued, but if the printer is off or the connection to it is lost, the Mac will stay awake forever waiting for the printer to return.
    Safari pages that periodically refresh themselves are very common. This will prevent sleep.
    Frequently checking for new mail may prevent sleep. Change Mail's preferences to check for new mail less frequently.
    iTunes and iPhoto sharing will prevent sleep.
    Active Bluetooth devices will prevent sleep.
    Active USB or Thunderbolt devices will prevent sleep. Disconnect them to help isolate the cause.
    Using Time Machine over a network may prevent sleep. Time Machine using a Time Capsule will not.
    There are plenty of third party utilities designed to prevent sleep. One may not have been completely uninstalled.
    Quit the process with the name powerd in Activity Monitor. It will re-launch on its own.
    Any number of "anti-virus" utilities can prevent sleep, along with other miseries. Get rid of them.
    ... Is there official Apple documentation about how sleep is supposed to behave in Mavericks?
    Read Mac OS X: Why your Mac might not sleep or stay in sleep mode

  • What's the difference between a web site and a web application?

    I'm stumped trying to come up to a difference between a web site and a web application for myself. As I see it, a web site points to a specific page and a web application is more of some sort of 'portal' to content and information.
    But where I'm stuck is that a web application is still viewed through a browser (is it not?) and a web site can still view content dynamically, making the line between web site and application prety gray.
    For instance, does a web site using ASP.NET or AJAX (I assume ASP.NET is AJAX's proprietary sibling, if not, ignore ASP.NET AND concentrate on the AJAX), becomes a web application because it can retrieve data dynamically and asynchronously or would a website
    using PHP and a CMS be more of a web application because it forms the pages on request, based on the request of the client and its content in its databse?
    Or maybe I'm totally wrong here - what differenciates between a web application and a website?
    http://support.peopleperhour.com/entries/68630566--C-mon-lets-Watch-The-Other-Woman-2014-full-movie-online-free
    https://glossicom.zendesk.com/entries/68643806--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
    https://cloudhance.zendesk.com/entries/68115098--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
    This is totally personal and subjective, but I'd say that a website is defined by its content, while a webapplication is
    defined by its interaction with the user. That is, a website can plausibly consist of a static content repository that's dealt out to all visitors, while a web application depends on interaction and requires programmatic user input and data processing.
    For example, a news site would be a "website", but a spreadsheet or a collaborative calendar would be web "applications". The news site shows essentially the same information to all visitors, while the calendar processes individual data.
    Practically, most websites with quickly changing content will also rely on a sophisticated programmatic (and/or database) backend, but at least in principle they're only defined by their output. The web application on the other hand is essentially a program that
    runs remotely, and it depends fundamentally on a processing and a data storage backend.
    http://support.peopleperhour.com/entries/68125597--%D0%BC-v%C9%AA%C9%9Bc-%C3%A4st-Watch-The-Lucy-2014-full-movie-free
    https://cloudhance.zendesk.com/entries/67541393--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
    http://support.peopleperhour.com/entries/68168787--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
    https://glossicom.zendesk.com/entries/68161538--Watch-The-Godzilla-2014-free-Online-Full-Movie-HD-Quality
    There is no real "difference". Web site is a more anachronistic term that exists from the early days of
    the internet where the notion of a dynamic application that can respond to user input was much more limited and much less common. Commercial websites started out largely as interactive brochures (with the notable exception of hotel/airline reservation sites).
    Over time their functionality (and the supporting technologies) became more and more responsive and the line between an application that you install on your computer and one that exists in the cloud became more and more blurred.
    If you're just looking to express yourself clearly when speaking about what you're building, I would continue to describe something that is an interactive brochure or business card as a "web site" and something that actually *does something that feels
    more like an application as a web app.
    The most basic distinction would be if a website has a supporting database that stores user data and modifies what the user sees based on some user specified criteria, then it's probably an app of some sort (although I would be reluctant to describe Amazon.com
    as a web app, even though it has a lot of very user-specific functionality). If, on the other hand, it is mostly static .html files that link to one another, I would call that a web site.
    Most often, these days, a web app will have a large portion of its functionality written in something that runs on the client (doing much of the processing in either javascript or actionscript, depending on how its implemented) and reaches back through some
    http process to the server for supporting data. The user doesn't move from page to page as much and experiences whatever they're going to experience on a single "page" that creates the app experience for them.

    ...can i make as many iweb websites as i want? ...and as many blogs as i want? ...i have never made one before....
    ....although, i do have my own small business and i do have a website that i paid a guy to make and also host....(which is a waste of $$$$ in my opinion as i think i can do a better job making one myself through iweb) ....
    ...anyways, i know it is splitting hairs but what exactly is the diff b/w a blog and a website ....i am under the impression that a blog is just a personal newsletter sort of thing,...?

Maybe you are looking for