What changed with create from clipboard?

Hi guys. Sorry if I do not sound technical on this but something has occured which might be how mavericks handles clip board contents now or photoshop.
In illustrator I might create something that I copy then in photoshop, create new from clipboard. It used to be if I set a highish resolution the resultant vector paste would be nice and large, for arguments sake I might have a full sfreen zoomed to 50%
Now when copying and crating from clip board even on high resolutions the size of the image is always the same, from A4 barley 500 pixels wide. which when experoting for a web or what ever makes it very small.
As I say I am not technical and do understand there are differences between resolution, pixels, dpi etc etc, but never the less something changed with CC or mavericks and I prefered how it was before!
Any ideas?

Somebody mentioned a bug along those lines just recently. I don't know for sure it is the same issue, but it sounded just like that.

Similar Messages

I cannot install iTunes updates as of today. Does anyone have any idea what changed with iTunes?

The question apparently needs to be typed in twice... good work. Here it is again:
I cannot install iTunes updates as of today. Does anyone have any idea what changed with iTunes?

Is this a distinct issue from the 42404?
If so, are you getting an error message when you try to install iTunes? If so, what does it say? (Precise text, please.)

What changed with sleep between 10.8 and 10.9?

Prior to Mavericks, sleep mode made sense to me. Hit the button and my iMac went to sleep almost right away. Hit the button again or hit a key on my keyboard and it would wake up almost right away, too. In between those two events, the machine would stay asleep.
WIth Mavericks, sleep seems to me to be baffling, random, and inscrutable. I cannot make any sense of how it works. The button puts the machine to sleep only if you're logged in. At the login screen you can only click on "Sleep" with the mouse. When you put the machine to sleep it can take several seconds, sometimes almost a minute, before it actually goes to sleep. (It also takes mystifyingly long for logout to complete.) Once the machine is asleep, it can wake up again without me doing anything, sometimes after after only a couple of seconds, other times sometime overnight.
I have searched around for what is going on, and most of the information I find talks about the reasons why OS X might wake up. That is not my question. My question is: What changed between 10.8 and 10.9 with regard to sleep? I didn't change any settings at all when I upgraded from 10.8 to 10.9, so why did the behavior change (and for the worse, I might add)? Why do I need to go review the half dozen or so settings that are possible causes for spontaneous wake? I had them set the way I like in 10.8. Is there official Apple documentation about how sleep is supposed to behave in Mavericks?
Thank you for any help you can give me.

This is always due to a process keeping the system awake, but determining which is the challenge.
A first simple step is to create a new, temporary user account. Log out of yours and log into the temporary one. Determine if it sleeps then. If it does then you have a login item that is preventing sleep. System Preferences > Users & Groups > Login Items.
Whenever you suspect a problem related to power, including sleep, an SMC reset is also recommended.
Active Spotlight indexing will prevent sleep. Wait for it to complete.
Check your Sharing preferences for anything that could permit an active network connection.
Energy Saver "Wake for network access" can prevent sleep, but unchecking it will prevent the ability to remotely access a sleeping Mac over a network.
A normally functioning Mac will sleep according to Energy Saver, but will wake periodically for network access, after which it will return to sleep according to the settings in Energy Saver.
Check Energy Saver > Power Nap. Whatever its setting happens to be, change it. Power Nap itself does not prevent sleep, but a corrupted Power Nap setting might. Changing its setting might correct it.
Unfinished print jobs will prevent sleep. If a print job is queued, but if the printer is off or the connection to it is lost, the Mac will stay awake forever waiting for the printer to return.
Safari pages that periodically refresh themselves are very common. This will prevent sleep.
Frequently checking for new mail may prevent sleep. Change Mail's preferences to check for new mail less frequently.
iTunes and iPhoto sharing will prevent sleep.
Active Bluetooth devices will prevent sleep.
Active USB or Thunderbolt devices will prevent sleep. Disconnect them to help isolate the cause.
Using Time Machine over a network may prevent sleep. Time Machine using a Time Capsule will not.
There are plenty of third party utilities designed to prevent sleep. One may not have been completely uninstalled.
Quit the process with the name powerd in Activity Monitor. It will re-launch on its own.
Any number of "anti-virus" utilities can prevent sleep, along with other miseries. Get rid of them.
... Is there official Apple documentation about how sleep is supposed to behave in Mavericks?
Read Mac OS X: Why your Mac might not sleep or stay in sleep mode

What changed with console fonts?

Yesterday I did an upgrade for the first time in three months. Everything went fine except I lost my lat9-16 console fonts as stated to use in /etc/rc.conf. I just get questionmarks instead, which indicates the font file cannot be found by the system. No panic, I just use default fonts instead. But I want to know what changed from three months ago. Thanks.
Last edited by Abakaba (2009-03-24 14:23:05)

pacman.log will tell you what was updated. It's generally a lot easier to determine which package did something if there are only a few package upgrades, rather than hundreds.

What changed with metadata in Acrobat 9?

We use Web crawlers to automatically post PDFs to our Plumtree portal. The crawlers read custom metadata that we add to the PDF and use it to categorize the PDFs.
With all previous iterations of Acrobat, this process has worked fine. Now that I've switched to Acrobat 9, however, the crawlers cannot read any of the metadata, whether it's custom fields or standard fields like Title.
Does anyone know what might have changed regarding metadata with Acrobat 9?
Rick Henkel
http://rickhenkel.googlepages.com/index.htm

Hello. I am also looking for an answer to this question. I use an older DAM program (Canto Cumulus V5) to file and categorize pdf files. It used to be able to read the metadata from pdf's but since I upgraded to Acrobat version 9 it no longer reads the metadata. Can anyone point Rick and I to the right solution? Thanks.
Paul Barker

Fill textBox with data from clipboard

Hi:
Here's my trouble.
I have a formulary with 3 textBoxs. 2 of them are written by the user, but the 3rd must be written with a String that is received from bluetooth and stored in the clipboard (this is no a must, the objetive is to fill the textBox, not to store things in the clipboard).
How can I do this?
Thanks for your help!

No, i already know how to work with the clipboard.
The point is how to write in the textBox from a desktop app.

Admins: What changed with this FAQ I posted?

When I initially composed and posted the FAQ for the Photoshop/Mac section at the following link...
http://forums.adobe.com/thread/421402?tstart=0
...I coded it to include the full size version of the following image, with the direct link just below it for the benefit of those pesky text-only participants ():
I coded it to display the full-size (492pxW) image because the Jive image-shrinking routine was doing some bizarre distortion to the reduced version...where parts of the image looked smeared, as though a wet sponge had been dragged across a watercolor marker drawing. NOT the whole image, only parts of it! Never saw anything like it before.
But now, I see that the image doesn't appear at all, and the link to the image doesn't work, either. I'd be happy to edit it so it works, but I 'm curious about why it worked properly for a day or two, and now it doesn't?

Phos±four dots wrote:
When I initially composed and posted the FAQ for the Photoshop/Mac section at the following link...
http://forums.adobe.com/thread/421402?tstart=0
...I coded it to include the full size version of the following image, with the direct link just below it for the benefit of those pesky text-only participants ():
I coded it to display the full-size (492pxW) image because the Jive image-shrinking routine was doing some bizarre distortion to the reduced version...where parts of the image looked smeared, as though a wet sponge had been dragged across a watercolor marker drawing. NOT the whole image, only parts of it! Never saw anything like it before.
But now, I see that the image doesn't appear at all, and the link to the image doesn't work, either. I'd be happy to edit it so it works, but I 'm curious about why it worked properly for a day or two, and now it doesn't?
Phos±,
I'm quoting your post in its entirety in the expectation that your image will sooner or later be replaced by a dead link.
Here's what experience has shown me during the last two weeks in these confounded forums:
If I use the camera icon and then use the "From your Computer" tab, my embedded images stay.
If, on the other hand, I use either the "Uploaded images" or "From the Web" tab, then my embedded images get replaced with a dead link, sometimes within a minute or two, sometimes after a few hours. Same thing happens with images in quoted posts.

Combine wizard with create from scratch?

I am a novice user. I have an existing Word document that I am trying to convert to a writable PDF. In the middle of the form there is a large area where I would like to be able to cut and paste large blocks of test. When I use the wizard, it reads each line I have created as a separate text field, so that when I cut and paste, you can't see all of the text. I tried to put in a number of returns in the document, rather than using typed "lines," but that wouldn't convert. I know that I can create a multi-line text field if I don't use the wizard, but does that mean I have to create the whole form from scratch? Any help would be greatly appreciated.

The wizard is part of Designer. You should ask in the LiveCycle forum that covers Designer.

What changed with the mousemove event, doesn'y work w/FF7

The code below was broken by the FF7 update. When you click on the image moving the mouse should scan across the enlarged image. Problem happens with Windows 7 as well.

I have tried this on my own computer. It do not know about older versions but it seems to work in Firefox 7 when you use the same code for xPos and yPos in Firefox as in IE. I get some kind of magnifier effect. 
 
if (navigator.appName.indexOf("Microsoft") > -1) 
{ 
ev=event; 
} 
xPos=(ev.clientX+document.body.scrollLeft-targetLeft)/PhotoSm.width; 
yPos=(ev.clientY+document.body.scrollTop-targetTop)/PhotoSm.height;

Trackpad changed with update

what changed with the latest update?
all of a sudden i can't click and drag with my trackpad!!!

See my answer in the other threads you created on the same subject.

Scrolling changes with build 455 (706481)

It seems something changed with scrolling from build 452 (705274) to build 455 (706481). The below works fine in 452 (705274) but in 455 (706481) if i scroll down to the bottom i cant scroll back to the top. I origanlly thought it was an issue with images b/c we have a lot of InlineGraphicElements and saw some comments about scrolling issues with images in the last change log but made this test and its happening without them.
<?xml version="1.0" encoding="utf-8"?>
<mx:Application
 xmlns:mx="http://www.adobe.com/2006/mxml"
 layout="absolute"
 horizontalAlign="center"
 applicationComplete="init()">
 <mx:Script>
 <![CDATA[
 import flashx.textLayout.BuildInfo;
 import flash.utils.*;
 import flash.text.engine.*;
 import flash.display.*;
 import flash.events.*;
 import flashx.textLayout.elements.*;
 import flashx.textLayout.formats.*;
 import flashx.textLayout.container.*;
 import flashx.textLayout.events.*;
 import flashx.textLayout.edit.*;
 private var container:Sprite = null;
 public function init() : void
 container = new Sprite;
 textArea.rawChildren.addChild(container);
 var textFlow:TextFlow = new TextFlow;
 textFlow.interactionManager = new EditManager;
 textFlow.flowComposer.addController(new ContainerController(container, textArea.width, textArea.height));
 var i : uint = 10;
 var total : uint = i;
 while( i )
 var dv : DivElement = new DivElement;
 var sp : SpanElement = new SpanElement;
 sp.text = i + "/" + total + " " + BuildInfo.kBuildNumber;
 var p : ParagraphElement = new ParagraphElement;
 p.addChild(sp);
 dv.addChild(p)
 textFlow.addChild( dv );
 i--;
 textFlow.interactionManager.setSelection(0,0);
 textFlow.interactionManager.setFocus();
 textFlow.flowComposer.updateAllControllers();
 ]]>
 </mx:Script>
 <mx:Canvas
 height="50"
 width="100"
 backgroundColor="#FFFFFF"
 id="textArea">
 </mx:Canvas>
</mx:Application>

I got the textLayout.swc from the 4.0.0.8217 gumbo build. I did look at the release notes http://opensource.adobe.com/wiki/display/flexsdk/changes4.0.0.8217. Only saw something about nullTabStopFormat and defaults possibly the change was made in another nightly build or i just missed it. Is there a better place to look for changes?
Thanks for the heads up about the API changes. Overall i think things have been going pretty smooth considering ive been working off weekly builds for the past 8 or 9 weeks. You guys have also been very receptive on the forum. Ill be ready for the API changes Monday when I update to the next weekly build.
Cheers

When saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?

when saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?. i would like to know what changes, so in the future i can set my camera to a setting that will give me the highest quality to begin with,allowing me to make crops and still preserve the quality.
thank you
dovid

It's the level of compression. Lower number, more aggressive compression, more visual artifacts.
Aside from that you should never use jpeg as a working format. The compression is destructive and cumulative, and the file deteriorates every time you resave it.
Use TIFF or PSD, and if you need jpeg save out a copy as a single final step.

HT1918 I can't seem to update my apps or make any purchases on from my account. Nothing has changed with my credit card information and for some reason the iTunes Store tells me my information is incorrect. What do I do?

I can't seem to update my apps or make any purchases on from my account. Nothing has changed with my credit card information and for some reason the iTunes Store tells me my information is incorrect. What do I do?

Yes, it's frustrating.
I don't have my iPod with me but, as I recall, the change is done in Settings/Store. That change will apply to NEW purchases. However, be aware that all purchases are permanently associated with the Apple ID that was originally used. Generally, it's only a problem when you need to update an app. IF you do your updating from iTunes and your logged in to the "wrong" ID, you'll need to log out and back in again. It's easier from the iPod as you do not need to log out/in but you do need to know the password.
Unfortunately, you can not merge IDs nor can you transfer purchases from one ID to another. Go here to find out exactly what you have. I have the same problem so I deliberately made both passwords identical to make things slightly easier for me.

I have file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method? alternate method? I have Adobe Ac

I have pdf file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method? alternate method? I have Adobe Acrobat X Pro and Windows -7 platform.

Yes, I just want to cover up all the pages for those particular area of document numbers.
Nothing sensitive about it. I just want to show the correct document numbers on all pages in print out.
So, I wanted to cover up by comments, but commenting on each page will be difficult. So, I wanted to comment the same on all pages.

Can you please tell me what to do when I change a file from PDF to word and it comes up with headers

Can you you please tell me what to do when I change a file from PDF to word and it comes up with headers and footers. I do not want the headers and footers but I need the information so that changes can be made in them - There are over 80 pages in this document and every page had a header and footer. The document did not have any headers and footers when it was first typed out.

Good day,
Try converting the document to a .doc format instead of .docx.
If that doesn't resolve the issue, please share the file with us via the File Conversion Issue form. Be sure to reference this forum thread in your description so we can circle back on the issue.
Kind regards,
David
Adobe Systems

What changed with create from clipboard?

Similar Messages

Maybe you are looking for