What checkbox "import again" when adding an transport request to import que

Hello
I wander what checkbox "import again" when adding an transport request to import queue means?
Thank you in advance

Hello Jan,
Well you should have searched in help.sap.com before posting here for basic concepts. Anyways, import again means after successful import also you can reimport that particular request.. Please see the below link for other options as well.
http://help.sap.com/saphelp_nw04/helpdata/en/5c/d21880fe3c11d2b461006094b9ea64/content.htm
Thanks,
Siva Kumar

Similar Messages

What happens when counter for transport requests is exhausted ?

Hi,
Just a simple question: Do you know what happens if the counter for transport requests reaches it's limit ?
Actually our development system has created E30K999205 as a last request/task. What will happen after E30K999999 ?? This will happen in two months...
Regards,
Joan

Hi,
Look at the below note .
SAP Note: 106911.
Thanks.

Error when creating a transport request

I have developed a process with GP and now I want to export it by creating a transport request. When I choose my process in the gallery, I get the following messages:
Process "House Connection Request" refers to deprecated version of Callable Object "CO_InputRequest"; deprecated versions cannot be exported
Process "House Connection Request" refers to deprecated version of Action "Input House Connection Request"; deprecated versions cannot be exported
Both the action and its CO exist, but I don't understand why they are deprecated as they are activated and working.
So I deleted them from the process and created them new, but I still get the same error message from above.
Any help is greatly appreciated.
Regards,
Aydin

Hi Experts,
we are currently facing the same issue, that some Guided Procedures processes can not be added to transports, always throwing the same error messages:
Process "xxx" refers to depricated version of Callable Object "zzz"; deprecated versions cannot be exported
Can someone tell us if this is a technical issue or has object xxx been created/modified in the wrong way?
Any help is greatly appreciated.
Thank you very much.
Kind regards,
Jan

Problem when creating a transport request

Hello
I copied productive BR3 to test BR1 system(it is a BW3.5 system). Test BR1 existed also before(only the main client was 003).
Now main client is on both 001(I do not know if this matter). I replicated with transport controller and everything went fine.
When I want to create a transport request I have problem "Extended transport contrl is not active . Cannot specify target client". when I wannt further explanation I get:
"Extended transport control is not active: Cannot specify target client
Msg.nr.TR067
Diagnosis
Extended transport control is not active. This means that you can only release transport requests for the following transport targets:
Target group
R/3 System without specifying a client
Procedure
Change the transport target of the request by removing the client (for example, "C11" instead of "C11.010").
The simplest way of doing this is to use F4."
When I use F4 for "Target" field I get "BR3.001" as only option. If I choose BR3.001 I get above message. If I use "BR3" I get "BR3 is not a consolidation target". For further explanation I get :
"BR3 is not a consolidation target
Msg.nr TK658
Diagnosis
Transport target BW3 is not configured as a consolidation target of this SAP System. If you do not stick to configured transport routes, you may cause inconsistencies between the SAP Systems in the system landscape.
If you use extended transport control, you also need to specify a configured target client.
If the configured consolidation target is a target group, you also need to specify the target group as the transport target, if the target group consists of a single target system, or a single target client.
Procedure
Choose a configured transport target, or change the transport route configuration in the Transport Management System.
What to do?

Hi Jan,
Please check whether parameter CTC=1 has been set in Transport tool,If not set it.
Also check whether your transport group is configured properly
regards,
Jai

TP error while adding the Transport Request.

HI,
My server crashed. Restored the backup. In STMS, I am not able to import old Transport Request. While importing throw the below error.
Command: ADDTOBUFFER DEVK900103 DEV U1 pf=
DEVELOPMENT\sap
Return code: 0247
Error text: addtobuffer has problems with data- and/or cofile
Request: DEVK900103

Please check at os Level that the cofile and the Data file Exist with proper permission.
Perforn Tp check once.
Can you try to import the TP from OS level by using the following commands.
first check wheather the cofile and data files are created in directory /usr/sap/trans/cofiles and in /usr/sap/trans/data.
if they exists you go to directory /usr/sap/trans/bin and then execute the following commands.
tp addtobuffer <Request number> <SID>
Thanks Rishi Abrol

Isssue when collecting the transport request for a query and its elements

Dear All,
When collecting a query and its elements, only the query is getting collected in to the request and not the elements and I an error is getting displayed as You can not use request xxxxx and elements could not be saved. This is in bw 3.5.
Can anyone suggest?
Regards,
Ram

Hi,
In the transport connection make sure that all the elements for the query which you need are manually checked.
Just drop down the menu and see the elements of the query and check if they all are selected or not.
Here you can also see if the elements are already present in some other TR.
Just delete all those TR's before creating this new TR.So that these objects are unlocked or it will not added to your new TR niether it will give an error.
Also make sure that all the elements have same data package and none of the query elements are assigned to temp package or any other package.
Once you are sure that all the elements are checked and above told issues are corrected then only create the transport and release them.
Thanks
Ajeet

Error when creating transport request in 000 clinet

Hi All,
I am getting the below message when creating a transport request manually in 000 client
Requests can only be created from ChaRM!
Message no. 38001
How can I deactivate charm for short time and then activate it again?
Please let me know your suggestion.
Thanks
Amair

Hi Sanjai,
Thanks for the quick response.
But I think it will disable charm process for the entire landscape. What we need to do if we want to disablke for particular system like one development system?
Thanks again
Amair

How can I check what kind of values does transport request saves?

Dear All,
I have changed the max.foregin exchange rate from 1% to 0% in company code global data and added a new error message 212 in work area F5. Then I transport it to QA system and PRD system.
However in T001 table change log PRD, the address was said to be changed from a number to another number also. But I don't remember that I changed the address of a company code. And I was not able to find the value before and after the change. Do you know where I can find the address of the company code? I have tried to get address in company code global data but in the poped dialog neither of the values are found. It is strange that the addresses of other company codes in T001 are not changed.
And in the transport request, the new number was not included. I don't very understand what kind of information was included but I know I did not change other config of the company codes.
I have 2 questions
1. Where I can find the address of a company code?
2. How to see what information has been included in the transport request?
Thank you in advance.
Emma

Hi Emma,
How to see what information has been included in the transport request?
Go to transaction code SE10 and identify your transport request then double click the left side you will be get tree.
if you want you can doubleclick the tree again so that you can identify which configuration step you saved.
Hope it is useful.
Thanks,
Haribabu

Bridge CS6 crashes when adding tags or ratings

Bridge CS6 crashes when adding tags or ratings. Someone suggested upgrading video driver. It resolved the problem for a short time and then started crashing again when adding tags or ratings. Sometimes it works fine but lately it crashes almost every time I tag or rate one image. I have upgraded my video driver and reset cache and reset preferences.
Never had a crash with Photoshop CS6 or RAW ...only with Bridge when Tagging or Rating
AMD Phenom II X4 810 2.60GHz
8.0 GB RAM
Windows 7 64 bit
Thanks for your help Paul

Curt Y ....saw your response to another person with the same problem.....video, printer, or scanner drivers could be the problem???? Really? My computer never crashes until I installed Bridge.
Faulting application name: Bridge.exe, version: 5.0.1.23, time stamp: 0x505aad8f
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000374
Fault offset: 0x00000000000c40f2
Faulting process id: 0xd78
Faulting application start time: 0x01cdf793e58dd872
Faulting application path: C:\Program Files\Adobe\Adobe Bridge CS6 (64 Bit)\Bridge.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: 2d3487d6-6387-11e2-9bb4-00265549541e
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T04:58:21.000000000Z" />
<EventRecordID>54203</EventRecordID>
<Channel>Application</Channel>
<Computer>Paul-PC</Computer>
<Security />
</System>
- <EventData>
<Data>Bridge.exe</Data>
<Data>5.0.1.23</Data>
<Data>505aad8f</Data>
<Data>ntdll.dll</Data>
<Data>6.1.7601.17725</Data>
<Data>4ec4aa8e</Data>
<Data>c0000374</Data>
<Data>00000000000c40f2</Data>
<Data>d78</Data>
<Data>01cdf793e58dd872</Data>
<Data>C:\Program Files\Adobe\Adobe Bridge CS6 (64 Bit)\Bridge.exe</Data>
<Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
<Data>2d3487d6-6387-11e2-9bb4-00265549541e</Data>
</EventData>
</Event>

Importing transport request bypassing quality system

HI,
I have a transport request in DEV BW system which is released. For some reason my Quality BW system is down so I cannot import the request in Quality BW system.
Usually we release the request from DEV , say request number DBIK1234, then import that request in quality system. After that we import the same request DBIK1234 into Production.
But for some reason quality system is down, so can we import the request bypassing the quality and directly into Production BW system??
Regards,
Rahul S

Hi Rahul,
Directly Transporting to PRD from DEV is not considered a "Best Practice"
and is therefore not encouraged. You should import into QAS first then the
Request is available in the PRD import buffer, and you can bypass the
recommended testing process if you really want to. However it is still
possible to import directly into PRD by manually adding the Transport
Request to the import Buffer.
We can also configure our TMS to add released TR's to Quality and PRD importing at the same time.
Better if you go through Transport Management System Documentations before you take decision.
Hope this answers your question.
Regards
Ramesh V

Any direct method to see what my transport request contains ?

Hi *,
I have 2 doubts.
1) I have a query already existing. Now I have created a web template of it. When I transport the query, is it that the web template automatically transports along with the query or we need to explicitly assign the request to web template ?
2) Is there any direct method(table or program) to know what are the objects contained in a transport request. I have hundreds of queries categorised into various transport requests. Some also contain web templates, InfoObjects etc. In a single shot I want to know what a particular request contains.
If I use SE09 or SE10, the UIDs of the query elements are displayed which I need to put in the table RSZELTTXT and see the description. This is making our task cumbersome.
Please let me know if we have any direct method so that I can assign points to the useful answers.
Regards,
Srinivas

Hi Mr Kapadia,
Appreciate your prompt reply. I have assigned you points.
But one thing - here I can see all the UIDS in a single instance for the request, but if I need to know what that UUID refers to - a query , web template etc or what then it could have completely solved the issue.
If you can find any table which also contains the descriptions and waht type of object it is do let me know.
Anyways, I guess this is a useful info for everyone.
Regards,
Srinivas

Application installation when adding an additional RD Session Host to a collection

I am in the process of adding a second RD session host to a collection in my Windows Server 2012 R2 RDS deployment. When doing this should I install the applications I wish to publish as remoteapps before adding the host to the collection or after?
There doesn't appear to be a way to add the RD session host role before adding the host to the collection.
I am concerned that if I install the applications before adding to the collection, the server may not install them in 'change user /install' mode. However if I install them afterwards, users may be load balanced to the new RD Session host before the
applications are installed.
I was just wondering what procedures others use when adding additional RD session host servers to existing collections?
Thanks

Hi,
First you install RD Session Host on the new server, then applications, then add it to collection. You can install RDSH via Server Manager -- RDS -- Overview -- Deployment Servers -- Tasks -- Add RD Session Host Servers.
-TP

Asking for transport request while table data updation

Hi All,
I am trying to update a table TCJ04 using transaction OPS6. When ever I am adding a new entry or edit the existing entry and click SAVE, the table is asking for Transport request number.
This table carries a master data and should not be asking for transport request. Rather its access has to be controlled by user authorisation.
Please tell me as to what is the reason of asking for transport request.
regards,
Gaurav.

Hi There,
It is asking for the transport request for each new entry in the table since the Delivery class in the attributes is set to C( Customizing table, maintenance only by cust., not SAP import ), If it is set to "A" it will not ask for the transport request..
Try creating a custom table and play around with the Delivery class, A and C, you will come to know the difference.
Let me know if you need further help in this regard.
don't 4get to rward pionts if found helpful.
Thanks-

Is there a way to see the details of transport request files

hello friends
for some reason when I try to create a package with objects like function group and function modules, I am not able to import the function modules on the other server.
So i would like to see if the transport request files that I have created (K900226.EC1 and R900226.EC1) has these modules included in them.
Is there a way that I can see what objects are included in the released transport request files.
Your help will be greatly appreciated.
Thanks
Ram

Hi Ram,
You can see the objects included in a transport request by going to se09 and opening your transport request and drill down to the task and below the task you would have all the objects that are included in the tranport. You can also use se03 to get the details by drilling down the tansport request.
The problem with importing the function module might be because either the function module or the function group may not be active which may cause the tranport to fail. please check if both are active or not.

Query Transport Request

HI,
I have created transport request for Bex Query. First time I created transport request , I collected all query and query elements apart from this two more additional components added to transport request ( No transport request open on that
query, Only display mode. I have created TP request for change mode)
"BW: LOIO Class Metadata and BW: PHIO Class Metadata ."
Next time i have tried with all grouping options in transport request, I have not seen
"BW: LOIO Class Metadata and BW: PHIO Class Metadata .".
anybody has idea why these "BW: LOIO Class Metadata and BW: PHIO Class Metadata ." components added transport request.
Please let me know if you have nay idea on this one.

Hi,
- Check in SE09/se10 for creating requests.
For collecting objects you have go Transport connection without missing the objects.
SE03 for checking the Request objects.
Go to transport connection in RSA1 Select u r Data target or report what ever it may be in development sys & select only necessary objectsu2026 click on transport optionu2026u2026it will ask the transport request create new req. go to SE-9 release the objectu2026go to STMS import u2026RELEASE The objects in quality sysu2026same procedure to production sys.
Thanks
sudhakar.

What checkbox "import again" when adding an transport request to import que

Similar Messages

Maybe you are looking for