What combo drive to buy

Hi all
My daughter bought a 12" 600mhz ibook on ebay, and I would like to purchase and install for her a combo drive for Christmas. I feel I have missed a few good opportunities on ebay since I am not sure which brand to buy, nor do I know what the differences in description are, ie: some say" slot loading" some say "dual usb"...and so forth. Can anyone give me some direction here?
I know my Pismo G3 powerbook quite well inside and out, and have done most of the upgrades myself, but on this ibook I am clueless. Is this an easy install?
Thanks for any help.
Sarah

The Combo drive in my 800 MHz G3 iBook is a "Toshiba DVD-ROM SD-R2412," if that helps.
DT & T Computer Service sells compatible drives:
http://www.dttservice.com/ibookg3.html#ibkoptical
If you're looking at used, PowerBook Tech parts out iBooks and sells the parts.
It is not exactly easy:
http://www.ifixit.com/Guide/Mac/iBook-G3-12-Inch/Optical-Drive
MacService will do it for you for $185:
http://www.macservice.com/optical.cfm
Good luck!

Similar Messages

  • What 1TB drives to buy?

    Hi Guys,
    I am about to buy 2x1TB drives to go inside my Powermac G5. Could someone let me know if the two types of drives I have linked to below are suitable? If not could you suggest a suitable 1TB alternative.
    http://www.ebuyer.com/product/143288
    http://www.ebuyer.com/product/150245
    Thanks,
    Dom

    http://www.tomshardware.com/reviews/hitachi-western-digital-terabyte,2017-13.htm l
    http://www.barefeats.com/harper14.html
    http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso

  • Advice on what hard drive to buy for Raid

    I will buying 8 of http://www.newegg.com/Product/Product.aspx?Item=N82E16822136544 these hard drives and i will be using a http://www.newegg.com/Product/Product.aspx?Item=N82E16816131004 raid controller to put them in RAID 3. Western Digital sais that these hard drives are not suitable for raid, the only hard drive i can find that is, is this one http://www.newegg.com/Product/Product.aspx?Item=N82E16822136797. I was wondering if there is an actaul difference between these two that makes a difference. Also I was wondering if any of you guys know of another hard drive that would be good for raid that is below 100$.

    Your drive and controller choice look good to me.
    I have used an Areca controller with WD Blacks for the past couple of years, and so long as you do have some form of backup other than RAID 5 redundancy on your PC you should be OK with "consumer" drives (aka WD Blacks, Hitachi Deskstar, etc.) as opposed to "enterprise" drives intended for RAID systems (AKA WE RE3, RE4, Hitachi Ultrastar, etc.).
    The enterprise drives have:
    - generally better parts - possibly some companies pick the best platters with the fewest defects for their more expensive drives
    - sometimes some features that help with vibrations caused by multiple drives in a PC all working in tandem
    - almost always a feature that will keep the enterprise drive from continuing to try and correct any error while reading or writing beyond a set number of seconds; WD calles this TLER (Time Limited Error Recovery);
    I've seen individuals suggesting that the spin-up time setting be increased from the default of .7 seconds up to 1 second when using consumer drives to help prevent consumer drives from being flagged as bad. I have not done this and I've never had a drive drop out in two years.
    I have about 50% enterprise drives (RE3 1TB WD's) and about 50% consumer drives (Black 1TB 32MB cache) which are very similar, except for firmware. In two years I've had one bad drive; no data was lost, just performance of the RAID and even that was pretty subtle. And by the way it was one of the RE3 drives that did go bad, not one of the consumer drives! When I started with the WD drives it was possible to download some software and set the TLER time on the consumer drives and gain much of the benefits of the enterprise models without paying for the much more expensive drives. Then, about a year ago WD changed their WD Black line to defeat this utility (it was a WD TLER utility!) from working with their consumer drives any more; yes, their have been some upset users over this one!
    Jim

  • Advice on what SATA drives to buy

    I want to install 2 sata drives as RAID0 on SATA 1,2.   It looks like i should stay away from the WD and Maxtor because of the BxP bridge chip issues, right? (Don't know what vendor has what vintage in stock, and I want to avoid the RMA loop).  So that leaves me with Seagate:
    Which one?: (from their web site)
    Barracuda 7200.7 SATA
    Barracuda Serial ATA V
    Barracuda 7200.7 SATA plus
    Best Regards

    I have had the Seagate drives in my sig connected to both the Intel and the Promise controllers in Raid0 with no compatibility issues. For some reason myself and others have noticed that the Intel Raid0 config is slower than the Promise for read speeds. Write speeds are the same.

  • What Backup drive should I buy

    I am looking to purchase a backup drive. The size 2GB, I am considering the Apple wireless drive but should I look at any other manufacturer?
    I am also going to use this drive initially to restore the erased data from my second internal drive. This also leads me to ask what recovery software should I consider.
    I would appreciate any feedback.
    mel

    Many people on these forums use OWC (www.macsales.com) Mercury Elite Pro series. IMHO that is all that I will buy, high quality and reasonable price. You can find them by clicking
    http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    As for what software, you should buy 2 of these drives. The first drive should use Apple's Time Machine, it's already built into OS X. The reason for a second drive is when it comes to backing up redundancy is very smart because backups can fail too. For drive two use a cloning app such as SuperDuper or Carbon Copy Cloner.

  • Don't know what kind of hard drive to buy

    i'm looking to expand my computer. i'm way past the point of having no more space left and i've found some pretty good deals on 300+ GB hard drives, but i don't know which ones will work in my computer.
    the hard drive currently in my computer is a 180GB ultra ATA/100 (7200 rpm)
    the problem is that, aside from rpm (revolutions per minute), i have no idea what any of this means. does the drive i buy have to be ATA/100? or can i buy ann ATA/300? what is the difference? does the ultra ATA have anything to do with it? because some of them just say ATA, or serial ATA.
    i really don't want to spend the money, have it shipped, and get it open only to find out that i bought one that won't work with my machine.
    i'm sure the answer to this question is pretty obvious, but no one ever explained it to me, and i'm just becoming more confused trying to find the answer myself through google.
    thank you in advance!

    is a bus a port for a hard drive? cause i have four of those. a guy at the mac genius bar explained that to me once when my tower was open. showed me where everything was and kind of explained what it did. i can put four hard drives in my computer. but does that mean that there is a certain one of the three remaining slots i have to put the new hard drive in? because i'm keeping the old one as well. no sense in wasting 180G of space.
    and since you obviously have a pretty good handle on this whole thing, which of these drives looks better to you?
    http://www.cdw.com/shop/products/default.aspx?EDC=928341
    http://www.cdw.com/shop/products/default.aspx?EDC=803402
    i know the bigger one is also slightly less expensive, but it has 8MB while the other one is ten dollars more and 20G less, but has 16MB
    how important is that, really? and can my computer even make use of it since it's pretty old?
    thank you so much for all the help you've given so far.

  • I recently purchased a Mac Book Air and wanted to know what would be the best external hard drive to buy as far as the brand and GB or TB are concerned? I will basically just be storing music, papers, and a lot of pictures.

    I recently purchased a Mac Book Air and wanted to know what would be the best external hard drive to buy as far as the brand and GB or TB are concerned? I will basically just be storing music, papers, and a lot of pictures. Also, how should I go about charging my computer? Should I wait until it is close to dying and then charge it?

    I have had good success with HGST and Seagate HDDs.  I suggest a HDD that is powered by the MBA eliminating the need for an AC cord.  They now come up to 1.5 TB in capacity.  In my opinion, one cannot have too much storage.  If necessary, let your bank account be your guide.
    Ciao.

  • What causes CD's played in combo drive through iTunes to skip?

    When I play an audio CD in my eMac combo drive through iTunes, just about every disc I play skips? When I play them on my home stereo CD player or my DVD player in audio mode they all play fine. What could be causing this?

    Hey Matt,
    Some of my CD's have slight surface flaws, but the oversampling by the combo drive should take care of that. It does in my video DVD-in-audio-mode player and in my home stereo CD player which does 4x oversampling.
    Songs in iTunes do not skip. The skipping is also not the "Max Headroom" type of digital stuh-tuh-tuh-tuttering. It is more like the audio intermittently cutting in and out.
    I did some more troubleshooting and discovered that part of the problem was a loose connector. The 3.5mm plug from my external speaker system was not making good contact with the audio out port on my Mac.
    The other part of the problem I discovered was that in one of the CD's I was listening to the recording has a sampled vinyl LP in it. The original LP had slightly audible surface scratches on it, and the original analog tape studio recording had dropouts in it. It just sounds real different when played on my Mac through my Klipsch speakers. Here's to that old audio engineering trick where the recording studio mixdown is done through Yamaha studio monitors with the idea that if the engineer can make Yamaha studio monitors sound good, the recording will sound good on everything else. The audio engineer on the Cinematic Orchestra CD titled Every Day apparently didn't use Yamaha nearfield studio monitors
    After jiggling the audio connector, Genesis' Selling England by the Pound sounds fantastic once again. Thanks for your input, it helped point me in the right direction. I'll also try cleaning the contacts on my Mac's audio out port with some contact cleaner.
    Thanks,
    John

  • What DVDs can combo drive read?

    Can my Powerbook G4 12 inch combo drive read DVD+r? DVD+r dual layer? DVD-r dual layer?
    I've found conflicting information online. Thanks.

    This subject matter can get quite confusing. Companies have confused the "Dual Layer" term and crossed their wires doing so. I have posted detailed info in this thread:
    http://discussions.apple.com/message.jspa?messageID=5095860
    Also, if you have the 12-inch model that I do, the 1.5GHz SuperDrive edition, then it reads both DVD-R and DVD+R discs. (A DVD±R drive). It will read DVDs with two sides to it, a side A and side B disc, you know, the ones with no artwork on the disc that look like bootleg DVDs but aren't?
    It won't read discs that have two writable layers in it.

  • What kind of interface does the Combo drive on a 17" iMac use?

    I found a "universal" adaptor for drives and I was wondering if I could plug the Combo Drive from a 17" iMac (1.6GHz) into it. Here's the adaptor/interface
    http://www.newertech.com/products/usb2_adaptv2.php

    I am familiar with Newer Technology, and their products are good. I suggest contacting them to make sure your drive is compatible, it looks as if it should be, but call to make sure.

  • Combo Drive problem

    I installed Leopard the hard way, using firewire target disc mode, but it's on. The reason is the original combo drive wouldn't recognize the Leopard install disc. It has trouble recognizing any DVD. CD's are fine for the most part. Now the weird part, Disc util and the system profiler always recognize the drive. Even with media in the drive, the software will recognize it, but might not recognize the media in the drive. I've read plenty of posts here with similar symptoms, what gives? I realize 10.5 is the last roundup for the Power PC processor, but other software besides system software is installed using optical media. Should I replace the drive? Is there a software solution I'm missing? Totally confused.
    OSX 10.5.6, 1.25GB RAM
    PHILIPS CDD5301:
    Firmware Revision: Z1.4
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 8192 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    Write Strategies: CD-TAO, CD-Raw
    Media: Insert media and refresh to show available burn speeds

    I'm curious why there are so many messages here with MDD Macs and the super/combo drives appear to be conking out.
    Besides being old and outdated, they're really isn't a mystery as to why "so many" posts are made.
    The drives have reached end of service.... they're worn out. Drives are not meant to last forever.
    That, combined with the fact that media has improved in speed, quality, and changed in construction, makes for a drive, based on old standards of media, that cannot handle the newer media.
    And, the majority of those posts are most quickly resolved with the new replacement drive.
    In some cases, the problem is resolved by simply cleaning the lens (with a $15+ kit), or by locating a problem in the OS, which can be tested in a new user account. With complete troubleshooting, a small % are found to be OS problems. Many of these, however, require OS reinstall. Kind of hard to do with a drive that isn't working well with the system (or vice-versa).
    Bottom line, is, there isn't much to be gained buy keeping an old 4x drive, when a new 20x drive, that has better media compatibility and is so much faster, is so cheap.
    And, as you said, a functioning optical drive is necessary. So, which path- troubleshooting, or, replacement?
    Factors that affect writing to or reading from optical media
    Power Mac G4 (QuickSilver), (Mirrored Drive Doors): CD-RW, DVD and SuperDrive Specifications and Usage Information
    The second article linked describes, what to me, are severe limitations with old combo drives, especially in consideration of the new media standards.
    DVD Technology: Overview
    Video Media Guides

  • Combo Drive Won't Burn

    Ok, Im having trouble with my combo drive on my iBook g4.. The drive is reading and ripping discs like normal but when ever I try to burn a disc, be it iTunes or from a burn folder it initializes and then just ejects the CD and and says "The attempt to burn a disc failed. The device failed to respond properly, unable to recover or retry"
    What's going on???
    I did a software update right before this happened.. Could that be a problem?
    iBook G4, 512MB, 1GHZ     iSight, Mighty Mouse, iPod Video 30GB

    Ok, found the problem. Bad media.. Don't buy "sale" generic items.

  • Combo Drive ribbon cable connector

    While upgrading my HDD on the Intel Mini I somehow broke the connector for the ribbon cable on the Combo Drive. There is a brown plastic clip that holds the ribbon cable in the connector, which cracked and fell off. Is there any way to fix this? The Combo Drive no longer works. The good news is that the new HDD works fine (awesome restore from Time Machine!) and I hardly ever use the combo drive. Any guesstimates on what the local Apple repair center will charge to fix this? Is it possible to buy the needed parts directly from Apple?
    Thanks!

    Ahh, I recently did the same thing on my mini when I was upgrading the RAM, the connector really ***** doesn't it? I went to the local Mac store and ordered the replacement board (that has the connector on it) for $30 (from Apple) without installation. When you go to the Mac store, tell them that the connector for the ribbon cable (they should know which one) fell off and if you can order a new one. Hope this helps.

  • How to BURN a 900Mb CD by combo drive?

    Hi,
    I would like to ask how to burn the 900Mb CD. I'm using apple ibook G4 12"/ Combo Drive (DVD-ROM/CD-RW). But when I start to burn it, it said there is not enough space for this. Please help me with this. Thank you very much.
    I already went to Apple shop in my area (Denmark) but they can't help and they said they've never heard of 900 Mb CD before, moreover, they suggest me to buy a DVD burner WHAT A REDICULOUS!!!!
    Please Help. I would like to know how to burn a 900Mb CD as it is a CD then my com must be able to burn it.

    Hi,
    Welcome to Apple Discussions!
    Okay, this webpage has some interesting info on 99-minute/900MB CD-Rs. However, one thing they say is:
    [T]hese CD-R99 media do not comply to the CD Red-Book standard. If you experienced problems using CD-R80 media then forget about CD-R99 media as it will not work at all!
    Furthermore:
    [T]he new CD-R99 media will not be fully useable on all CD-Writer [sic] & CD-Readers.
    They also point out that the process involves overburning, an inherently unreliable means of creating a CD.
    I really think a DVD writer may be the way to go here, especially if you want to maintain compatibility.
    Hope this helps,
    SiR G.

  • Combo Drive Problems

    I just installed the IDE CDRW/DVD combo drive and the PowerDVD software that came with it.  Unfortunately I cannot seem to get my DVDs to play correctly.  After about 10 minutes the playback goes buggy on me.  It sort of crashes.  By that I mean the DVD will go start over at the beginning (the studio logo part).  I played the disc on two other players and it works fine.  I also tried using another disc, and I experienced the same problem.  The thing kind of resets.  Further attempts have resulted in crashes and lock ups.  I attempted playing the disc with PowerDVD and Windows Media Player.  I made sure the drive was set to DMA and I did flash the drive BIOS.  The hardware manager for the OS says the device is functioning properly.  Anybody have any suggestions?  Is this a hardware or a software issue?

    Okay, I reinstalled the OS, installed WinDVD 4 and tested the discs.  So I concluded that the problem was solved by reinstalling the OS.  I assumed it would be safe to install PowerDVD 5.  I did that and tested the disc and look what happens.  Same old problem.  I uninstalled it but still have the same problem!  All that hassle of backing up my old data, reinstalling the OS...and the suffering.  Oh the suffering.  
    At this point I think I'll just roll over and play dead.  Fine...I can't watch Underworld on my deskbox past chapter 3...strangely, Matrix used to skip backward too, but that problem seems to have gone away.  
    I saw Wonkanoby's post about the new Nforce drivers...I picked those up...no help.  I've pretty much done everything I can think about.  At one point I've even taken the drive back and exchanged it for a new one.  All updated drivers...DirectX 9...WinUpdated all current...really, nothing I can think of short of getting a new drive.  But...it works fine for some discs?!
    I think I'm going insane...man...look at this thread...I must be insane...I've spent a great majority of it talking to myself...

Maybe you are looking for