What composition settings for Black Magic 10 bits AVI 1920x1080 (1,0) 25p

Hi,
I want to use some Black Magic 10 bits AVI 1920x1080 (1,0) 25p footage and wonder what settings I have to use in the Composition Settings Dialog Box.
Thanks! David

Change the project settings to 16 or 32 bit. Drag some footage into the create new comp icon at the bottom of the Project Panel.
Your composition will exactly match the clip. If you check composition settings you'll see:
Or you could just use the HDTV 25 preset. All the standard settings are supported.
You'll probably want to create a custom output module for your blackmagic codec and set that to be the default. Remember to include audio processing if it's important to your workflow.
Here's mine:

Similar Messages

What target settings for LCD monitor calibration?

I have recently installed Spectraview II to calibrate my NEC LCD 2180WG monitor but have some doubts on which target settings to use as there are different opinions on color temp, gamma and intensity choices.
I use my system purely for photo post-processing and printing on color calibrated printers. I use AdobeRGB color space and have no interest for processing images for web.
- What color temp do you use/recommend? D50, D65 or something in between? I see that some folks use D65 and others swear by D50.
- What about Gamma choice 1.8, 2.2 or L* ? Same here, no common choice here too.
- Lastly what about intensity (brightness in terms of cd/mm2)?
NEC recommends Target Settings for Printing, which are D50, 1.8 gamma and Max. Intensity, but I'm not sure.
I'd appreciate if you could recommend correct settings for my type of work.
Thank You

Charles,
I arrived at 5100K by measuring a few of my favorite printing papers with my spectrophotometer. This was a good compromise (most measured between about 4800K and 5300K). I confirmed the results by trying various calibrations them comparing the monitor to prints (using custom printer profiles). Anywhere near 5000K looked great, but 5100K was the best match of the bunch. I used 5000K lighting for viewing (Solux and Philips light sources).
Luminance settings were done in a similar fashion. First I compared a ppure white Photoshop document (on the monitor) to the intensity of a sheet of white printing paper displayed under my viewing light. With the monitor luminance set to the 85 cd/m2 range, the two documents look about the same brightness of white. I try to view my prints under "moderate" light levels rahter than ultra bright levels, since I know they won't be lit by spot or flood lights when placed on a wall. If you do have spots on your hung prints, there is a case to use a higher luminance level on your monitor. Anyway, on many LCDs, if you set the luminance too high, your blacks can start to look a little washed out. When set to about 85 cd, my tonal range in the print is a great match to my monitor. If I have the monitor luminance set to 100 or higher, I find that my prints look dark and muddy in comparison (unless viewed under unrealistically bright lights). So, a lot of trial and error, plus some initial brightness comparisons.
Gamma is a tougher one. I have a special viewing target that I bring up in Photoshop (Lab based to prevent any possible conversions). When viewed in Photoshop at full magnification, it helps me to set the gamma, which affects mostly the midtone density. On my LCD, I found )again by trial and error) that 2.0 gave me the best tonal distribution. My old CRT worked best at 1.8 gamma, and other LCDs sometimes work best at other gamma settings, such as 2.2.
The above settings work beautifully given my equipment, my viewing levels, ambient working conditions, etc. My monitor to print match is excellent from both a color and tonal range standpoint. Hope that helps clarify my thinking and approach.
Lou

Best scanner settings for black and white text only

I need to scan a lot of older text documents, I have a DRG 1100 scanner. what are the best settings for text only black and white, thanks

"How about under "Default Settings"? Is there a option for B&W printing?"
No there isn't.

How to install Windows 7 in UEFI modeand what bios settings for D30

How do you install windows 7 in UEFI mode and what bios settings do I need to install it on a D30 workstation.

Not a ThinkStation guy, but FWIW, that can happen when installing Win 7 in UEFI mode when CSM support is not enabled in BIOS.
Is CSM support - either explicit or by selecting "other OS" and turning UEFI back on as suggested above - an option?
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

What Compressor Settings for the web?

I have a 1min40 sequence with the Settings: PAL, Frame Size: 1280x720, 25fps, Compressor HDV720p25. What Compressor Settings would you recommend please:
1) to put it in a website
2) for Broadcast: would Apple ProRes HQ be a good choice?
Thanks in advance.

You can review the information first hand at youtube.com
Or create a custom preset in Compressor:
Name: YouTube sharing
Description: H.264 video at 8 Mbps with AAC 44.1kHz audio
File Extension: mov
Estimated size: 3.6 GB/hour of source
Audio Encoder
AAC, Stereo (L R), 44.100 kHz
Video Encoder
Format: QT
Width and Height: Up to 1280 x 720
Pixel aspect ratio: Default
Crop: None
Padding: Preserve source aspect ratio
(L: 0, T: 0, R: 0, B: 0)
Frame rate: (100% of source)
Frame Controls: Automatically selected: Off
Codec Type: H.264
Multi-pass: On, frame reorder: On
Pixel depth: 24
Spatial quality: 50
Min. Spatial quality: 50
Temporal quality: 50
Min. temporal quality: 50
Average data rate: 8 (Mbps)

What memory settings for Kingmax 3200 MPXC22D-38 512 Mb on a K8T Neo-FSR board?

Hello,
Like many people here, I have been having some major stability problems with this board. I am looking to upgrade my old DDR266 memory to a 512 Mb stick on the MSI approved list and decided to go with the Kingmax MPXC22D-38 DDR400 512 Mb stick. I know that is usually necessary to change the memory settings to achieve stability (which is my main goal) and am looking for recommendations for settings. Any help with what each number means (or which setting it applies to) would also be very helpful.
Also, what would be some good settings for my old DDR266 512Mb memory until the new stuff comes? Memtest86+ reports it at CAS of 2.5-3-3-6, and I am looking mainly for stability.
Thanks for any help in advance.
Cheers,
Tom

Hello,
My stability problems seem to mirror most of the posts here, random freezes that are not reproducible and seem to happen un-related times. It is a complete freeze with no sound, only option is to press reset. I can almost guarantee a freeze when playing a 3d game after about 10-20 minutes.
Would the "Fail safe" settings be the most stable? I saw your post said "for maximum troubles" but thought you meant this would reduce them.
Cheers,
Tom

WHAT BIOS SETTINGS FOR RAID 0 MSI NEO4 SLI-F-AMD 3800+MANCHESTER

What are the M-Board settings for raid-0 I have 2 Seagate 7200.3 500gb drives MSI NEO4 SLI - f board and a AMD 3800+ Manchester. Thanks

Setting up raid
http://www.nvidia.com/object/feature_raid.html
There are two guides here :
Media Shield User's Guide PDF
RAID Floppy Disk Install PDF
Most things are covered in thees guides if running a nForce4 system.

890FXA-GD70 - what bios settings for RAM

I have a 890FXA-GD70 mb and some GSkill dual channel memory with latency of CL7-7-7-21 at 1.5v.
Specifically, what bios settings do I change to properly use this memory?
thx

Quote from: camphill on 19-April-11, 06:16:34
I have a 890FXA-GD70 mb and some GSkill dual channel memory with latency of CL7-7-7-21 at 1.5v.
Specifically, what bios settings do I change to properly use this memory?
thx
Need more information pertaining to the issue at hand, does the PC have problems booting or stability issues or does it run no problems at all?
From whats in your sig it seems you have some OCZ unless that is incorrect? What is the issue at hand?
For dual channel, put the two sticks of ram into color matched DIMM's closest to the CPU, 1&2 for AMD boards as far as I know.

Cant find settings for black and white prints using konica minolta bizhub 280 printer

I am having difficulty finding where to set our network Konica Minolta bizhub C280 printer to print black and white instead of colour from my macbook pro with OSX 10.8.2. I dont want to change the default printer settings, just change individual document print settings. Can anyone please assist me as to where and how to do this?

"How about under "Default Settings"? Is there a option for B&W printing?"
No there isn't.

What sequence settings for MP4s when importing them? Rendering is a pain.

I downloaded some clips for an editing project and the codec information listed for them is H.264, AAC, MPEG-4, ODSM, MPEG-4, SDSM. I imported the files into FCP 5.1.2 as part of a new project so what exactly do I change so I don't have to render them every time I make an edit or apply a filter? I'm assuming I change the sequence settings but what exactly do I change...the QuickTime Video Compressor settings? Tried it for H.264 but it didn't work unless I missed a step. Thanks for any help.

chances are Shane's excellent tip will get it all set
up for you, but be warned that not all non-standard
codecs can be edited "natively" in FCP, and you
should not automatically assume that they can.
if you are trying to work with clips in one of these
non-native codecs then you should transcode them to a
native format, such as DV, first. (you can do this
using FCP's Batch Export function)
After using the Batch Export function on the clips as well as individual clips I am receiving General Error messages when I try to import the file(s). Any thoughts? I tried Shane's tip as well and it works except for the audio rendering as mentioned in the tutorial. Not a huge deal though. Now I need to figure out a way to do the Multi-Clip sequence thing for 16 clips since it only does it one clip at a time.

What export settings for iPhone to TV

If TV of any size is the final destination of the movie, but it will be
played from the iPhone, which settings do I use?

Replying to my own post. Here's what I found:
I could export the movie in a size up to iPhone (one step above Tiny on the
Settings Pane). No problem at the iPhone level. This I did with the Project Properties
set at 4 x 3. It played pretty well on the plasma with the TV setting up to Wide or Full,
not to Zoom or Super Zoom. By this point, there's no guessing, setting is done on the fly.
Viewing from 15 or so feet away was acceptable, although the resolution is far from HD.
Still, for a family album, with a soundtrack it went over very well.
Good luck with your project.

What client settings for BIOS or MEBx do I need preconfigure for Out Of Band Management in SCCM 2012?

Hi,
On the Client:
What BIOS or MEBx setting do I need preconfigure for Out Of Band Management in SCCM 2012?
Or can I remotly configure BIOS or MEBx settings from SCCM 2012 or Intel SCS?
/SaiTech

Thanks,
Now I see, with Intel SCS add-on for SCCM 2012 it will be the most simple solution. Even better than to have Intel scs standalone, that was an complex setup on dhcp and so on...
Just one thing more, When you configure AD for AMT you have to set a OU. but if you have computers in two ou, I cant see how I can configure that?
/SaiTech

What camera settings for best viewin on ipod?

I have the following settings: 4:3, 4608x3440 (16M) 488 frames
3:2, 4608x3072 (14M) 546 frames
16:9, 4608x2592 (12M) 646 frames
4:3, 3264x2448 (8M) 958 frames
16:9, 3072x1728 (5M) 1425 frames
4:3, 2304x1728 (4M) 1878 frames
16:9, 1920x1080 (2M) 3455 frames
I have a fujifilm jx360, 16MP camera.
I plan to put them in my 4th generation ipod touch and 1st gen iPhone.
Thanks.

It does not make any difference for the 4G iPod since iTunes optimizes the photos for the iPod, iPhone and iPad. see:
http://support.apple.com/kb/ts1314

What sequence settings for SD DCVpro50 squeezed ?

I'm just getting a massive black boarder around my clips using easy setup.
Any ideas ?
Cheers
-matt

Ok I'm shooting on the HVX200.
My mac is runnig everything latest version including osx.
*DVCpro50 in standered deff (pal 576i) .
*25p.
*Squeez mode (I think is 16:9 on pana).
*P2 card dumped to desktop then imported via P2 import in fcp.
Anything else ?
Cheers again.

What are settings for iCloud mail smtp and imap OS 10.7.5?

message is could not connect to this icloud IMAP server. verify you entered the correct info in the account preferences. Says the same thing on SMTP server.

Hello,
Check if Mail is changing imap.mail.me.com to old mail.me.com & smtp.mail.me.com to old smtp.me.com.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
    •    Server name: imap.mail.me.com
    •    SSL Required: Yes
    •    Port: 993
    •    Username: [email protected] (use your @me.com address from your iCloud account)
    •    Password: Your iCloud password
SMTP (outgoing mail server) information:
    •    Server name: smtp.mail.me.com
    •    SSL Required: Yes
    •    Port: 587
    •    SMTP Authentication Required: Yes
    •    Username: [email protected] (use your @me.com address from your iCloud account)
    •    Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0

What composition settings for Black Magic 10 bits AVI 1920x1080 (1,0) 25p

Similar Messages

Maybe you are looking for