What connector type is used to plug a guitar into the iPad? Does it connect to the earphone jack?
What connector type is used to plug a guitar into an iPad? Does it connect to the earphone jack?
Actually you can get something like this from your local mac store. http://www.ikmultimedia.com/products/irig/ It plugs right into the earphone jack and works fine (I own this model and it works well on the go). For my actual mac, I use a Monster iStudioLink, which I have heard will work with the iPad 2 (but with some bugs - see the comments on the Monster website) http://www.monstercable.com/productdisplay.asp?pin=2440
Similar Messages
-
I have an Ipad 2 that I use to view an IP camera over a Wifi network. The Ipad is in a vehicle that leaves the Wifi range and then returns to the range. Upon returning to the range, the Ipad has trouble connecting to the network. (30 seconds) The Ipad will eventually connect to the network, but by this time the driver is frustrated. I have moved the antenna to within 20' of where the vehicle comes to a stop. My Iphone does not have a problem connecting or reconnecting when used side by side with the Ipad. Both the Ipad and Iphone have Otter box covers. Has anyone run into this problem or have any suggestions?
30 seconds to reconnect to a WiFi network is not unusual, especially in an environment where other radio signals on similar frequencies are present. Sorry about that.
You might get better times by letting the WiFi base station pick another channel. But you might not. -
What is the name of the iPad cord that connects to the adapter
What is the name of the cord that hoos up to my iPad
Dock connector to USB cable - AFAIK - that is what it is called. From my Google search ...
Apple - iPad 2 - View the technical specifications for iPad 2.
www.apple.com/ipad/specs/
See full tech specs for iPad, including screen resolution, height, weight, performance,... VoiceOver screen reader; Support for playback of closed- captioned content ... In theBox. iPad; Dock Connector to USB Cable; 10W USB Power Adapter ...
You've visited this page 46 times. Last visit: 1/22/12 -
I have a Nikon Coolpix P500 but am unable to download photos from it to my iPad2 via the iPad Camera Connection kit. The iPad does not see either the Sandisk 8GB card or the Nikon camera. I have turned the camera on, but it seems that the camera just want to recharge its battery through the iPad as the iPad states that the devices draws too much power?? Anybodu solved this problem yet? Advise please?
One thing to check is the format that the camera is saving pics to the card in. Many are selectable and, in most cases, if PTP is one of the options then you need to have that one selected for the files to be visible to iOS and the CCK (connection kit).
Another thing which sometimes comes up, especially with older cameras and therefore probably not with yours, is the filenaming conventions used by the camera. iOS is quite strict about what it expects to see and if files are being stored with unsupported name formats then they simply won't be seen at all. -
iPad does not respond message "this iPad hasn't been backed up in 2 weeks.Backups happen when this iPad is plugged in, locked, and connected to Wi Fi" if i try to unlock iPad to swicth on Wi-fi as it is not on, the iPad does not respond
Reset: Hold the Sleep/Wake and Home buttons until the screen goes dark and the Apple logo appears
To stop the message:
Settings > iCloud > Storage & Backup > Backup Now
iCloud Backup will run automatically on a daily basis if:
- it is plugged into a power source
- it is connected to Wi-Fi
- the screen is locked -
What data type is used for storing password,
What data type is used for storing pass word in oracle db, i mean if user inputs some thing from forms it should be in Encrypted form in db, please any help??
Thank you
HinaData type is VARCHAR2:
SQL> desc dba_users;
Name Null? Type
USERNAME NOT NULL VARCHAR2(30)
USER_ID NOT NULL NUMBER
PASSWORD VARCHAR2(30)
ACCOUNT_STATUS NOT NULL VARCHAR2(32)
LOCK_DATE DATE
EXPIRY_DATE DATE
DEFAULT_TABLESPACE NOT NULL VARCHAR2(30)
TEMPORARY_TABLESPACE NOT NULL VARCHAR2(30)
CREATED NOT NULL DATE
PROFILE NOT NULL VARCHAR2(30)
INITIAL_RSRC_CONSUMER_GROUP VARCHAR2(30)
EXTERNAL_NAME VARCHAR2(4000)
PASSWORD_VERSIONS VARCHAR2(8)
EDITIONS_ENABLED VARCHAR2(1)
AUTHENTICATION_TYPE VARCHAR2(8)You can use SQL function ORA_HASH to hash password: http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/functions124.htm#SQLRF06313. -
What message type to use for syndicating data back to R3 from XI
What message type to use for syndicating data back to R3 from XI. It gives a Message type IDOC error code 51.
Hi Rehman,
You are getting error 51 which means "Error: Application document not posted".
This might because of two reasons:
1. Your IDoc doesn't contains all the mandatory fields required by the inbound function module to post the IDoc.
2. You have assigned wrong inbound function module to post the IDoc.
Please check these cases.
Hope this will help you.
Thanks,
Shiv Prashant Dixit -
What device i could use to plug to ipad for credit card/barcode scanning purpose.
What device i could use to plug to ipad for credit card/barcode scanning purpose?
For credit card reading go to Square you can find them at https://squareup.com/
For bar code reading download the RedLaser app from the App store on your iPad. -
iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?
After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple -
why does it say im not connected to the internet when i plug my i phone in but i am connected to the internet. what do i do?
no into my labtop i have internet but for some reason when i plug my iphone into it it saids update servers could not connect to the internet please check to make sure u have internet and i do.
-
Help! I used to be able to sync my iphone as soon as I plugged it in. Now sync does not appear in the menu nor does photos. How do I get these opti
ons back??Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
-Griff W. -
If I plug a guitar into iPhone GarageBand using an interface, can I still use the built in microphone to record vocals and guitar at the same time?
Hi John,
I think the only way is to get an iMic...
http://www.bhphotovideo.com/bnh/controller/home?O=&sku=797644&is=REG&Q=&A=detail s -
I have an Airport Extreme which I'm using for a wireless network. (The wireless router is connected to a DSL modem.) Can I also plug in my iMac to one of the free ethernet ports on the Airport Extreme to connect to the Internet that way? Thank you.
Yes, you can.
-
I blocked my ipad and then tried to use find my iphone to restore it but my ipad wasn't connected to the internet so it didn't work. Now it wont restore using Itunes either. How can I fix it because nothing works?!
http://support.apple.com/kb/ht1212
Maybe you are looking for
-
Hi I have an iPad mini and it was on iOS 6.1.3, my friend came and he said that he knows how to install iOS 7 for me. I gave it to him and he tried to install it, but apparently he failed to do so and an "Activation Error" is appearing on the screen
-
Get file path name for an given FileInputStream
It sounds wired, but I do want to see if it is possible. Say we have a FileInputStream fis, which has been instantiated and valid. I would like to get the File associated with this FileInputStream. Is this possible and how? Thanks.
-
I need help attaching a few hyperlinks my godaddy welcome page. I have 2 more ipages articles, I also converted them to pdf. Godaddy only helped (last year) with the 1st article. I do not know how to attach a hyperlink to the artlcles and add the hy
-
Enterprise manager not installed.
Hello everybody I have installed the SOA 11.1.1.2 suite as per the documentation. But when i am starting teh weblogic server,during startup it throws error regarding enterprise manager. stacktrace is like this <Jan 8, 2010 12:00:40 AM GMT+05:30> <War
-
I am trying to find the current users of an accesss db. I have found the following article but it is in VB. I need to use it in C#. The snipped convert site does not convert this so - I wonder if anyone can help. It is lines 18 to 30 that are giving