What consistent parameter will do in export? advantages?

Hi ,
What is consistent parameter in export. in what scenario it helps .pls let me know.
Thanks,
Kumar.

Refer this link:
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#sthref2250
@B548204BB:
With the "consistent" parameter you can ensure at 90% your export will be consistentWhy 90%?

Similar Messages

What should be the procedure for export parameter in CATT

Hello Everybody,
I am working with CATT, and the transactions are ME21N and MIGO.
when i am executing the transaction ME21N i will get the Pur Ord Noin the message, and i would like to export Pur Ord No to the transaction MIGO as thr is one field named Purch.ord no in Migo.
what should be the Procedure for exporting a parameter?
Thanks,
Regards Afroz

Hello Afroz,
If you are using eCATT then following is the procedure of capturing messages in the two recording methods - TCD & SAPGUI.
=> TCD Recording Mode:
In TCD recording mode, after dobleclicking on Interface name from the TCD command in the editor on left side, just before the MSG folder DYNPRO folder will appear on right side.
-This DYNRPO folder contains the screen sequences contain the screen occurred during recording time. The last Dynpro of this folder contains the messages occurred during recording.
-Select this last folder & click on Simulate Screen icon of the same Interface editor. It will redirect to the screen where the message values exist. There select the Purchase Order Number and click on Read Field Value icon. Give the name of Export Variable.
The export variable will contain the value of the purchase order number, which can be passed to MIGO.
=> SAPGUI Recording Mode:
In the SAPGUI recording mode, the screen on which the message appeared will be used to capture the variable name, which is Purchase Order Number in this case.
If the Purchase Order Number is second variable of the message displayed(e.g. Purchase Number 2122323 Is Created)
then use the following code -
e.g.
MESSAGE ( MSG_1 ).
SAPGUI ( ME21N_4001_STEP_5 ).
ENDMESSAGE ( E_MSG_1 ).
Assing the value from the message to the export
parameter
P_EC_PurOrdNo = E_MSG_1-[1]-MSGV2.
There are total four MSGV1-MSGV4 variables. Dobule click on MSG_1 of the MESSAGE statement above. Putting the value in the export variable from the right message variable will give the purchase order number.This can be passed as MIGO.
Regards

My Databse size is 10 gb what will be my export dump size?

My Databse size is 10 gb what will be my export dump size?
Why is there is difference ?

Hi,
an Oracle Block constists not only of the row-data itself,
but also has a block header.
This is made up ofdifferent structures which will use about
- 60 bytes of fixed administrative information for the block
- 24 bytes per transaction slot (depending of the value inittrans there will be a number of preallocated slots for transaction pointers, default 1 for tables 2 for indexes, in every block header) this socalled ITL consists of three parts:
- Undo segment number the transaction is using for the before images
- Undo slot number in the undo segment
- sequence number (this will be incremented at commit time)
2 bytes for every row which is inserted into the block.
Also the rows have a header each (congtaining the number of columns belonging to the row for example) and every column in a row has header also(containing the informatin of the datatype and the length of the value for the column.
You see that there is a lot more info in a block than just the rowdata.

What does Consistent=Y means in the export utility

Hi,
I have been trying to understand consistent=y means through so many books however didnt get my fundamentals clear on that part.
can someone let me know what does this would do??( in brief)
I would also like to know what would happen if consistent is set to N?
also what oracle would do if the export is in progress and some update is going on?
Thanks
NK

CONSISTENT was used to get data consistency during the export time. As it explain as well in the doc of export utility.
That say, it's for old export utility, and it is no more used with the new 10g export utility, expdp. By reading the 10g expdp doc, you should learn to use FLASHBACK_SCN or FLASHBACK_TIME instead.
Nicolas.

Consistent parameter in Data Pump.

Hi All,
As we know that there is no consistent parameter is data pump, can any one tell me how DP takes care of this.
From net i got the below one liner as
Data Pump Export determines the current time and uses FLASHBACK_TIME .But I failed to understand what exactly it meant.
Regards,
Sphinx

This is the equivalent of consistent=y in exp. If you would use flashback_time=systimestamp to get the data pump export to be "as of the point in time the export began, every table will be as of the same commit point in time".
According to the docs:
“The SCN that most closely matches the specified time is found, and this SCN is used to enable the Flashback utility. The export operation is performed with data that is consistent as of this SCN.”

Data Pump Consistent parameter?

Hi All,
Is there any consistent parameter in data pump as it is in exp/imp.
Becuase we are using data pump for backups and want to disable consitenct parameter.
Please let me know how I can disable consistent parameter in Data Pump.
Thanks

if it;s not backup method then How you do the logical
full database backup????
From my thinking it's called logical DB backup (when
u are using exp or expdp)There are many reasons that export shouldn't be used as backup method,
1. It's very slow to do export on huge database ( which you already experiencing) the import will take much longer.
2. You only have a 'snapshot' of your database at time of backup, in the event of disaster, you will lost all data changes after backup.
3. It has performance impact on busy database ( which you also experiencing)
Other than all these, if you turn CONSISTENT to N, your 'logic' backup is logically corrupted.

What is the best seeting to export as smaller file size AVI from FCP?

Hi, I know the topic sounds very similar to many of AVI post it had been up, however, somehow, I do not find the right answer that I'm looking for.
I have a couple animation created from QT as "image sequence".
I simply want to export as avi file.
Here is the question I have.
1. If I choose DV/DVCPRO-NTSC, and choose scan mode as Progressive, I get interlacing looking quality video.
2. If I choose compressor type as "NONE" then even I set as "least" quality, the file size will be over 1G..although, that's the quality I'm trying to archive.
Is there any other setting I can choose to get good quality with lower file size avi? I have seen or download avi file on the net with very good quality and still download-able file size...

What is the QT method? (Export from QT Player?)
Yes, 10 hour plus is ridiculous. I'm guessing that there was either something wrong with your Internet connection and/or at the You Tube end of the uploasd/compression process.
Innocentius and Hugh are right; using Compressor (or MPEG Streamclip) and using YT's uploader is the most reliable workflow.(Since Google changed the account verification process, there have been reports of upload problems using Share>You Tube.) In addition, you have more control over the quality of your movie. You can create multiple custom settings in Compressor and then Share > Compressor custom settings. It will go faster if you export out of FCP as a Pro Res 422 file; should take 3-4 minutes top. The Web encode for a 3 minute video in Compressor might take 15 minutes, depending on your system. MPEG Streamclip is probably a little faster.
Russ

Premiere and Media Encoder will will no longer export my edit to any file format.

This is on a Windows 8.1 PC.
The edit exported fine until I made one big mistake.
I created a Nested Edit to make a quick alteration.
Since then the following is now the case and I cannot go back to an earlier edit to fix this.
Premiere and Media Encoder will will no longer export my edit to any file format. Using either the Export Option or Media Encoder. Get a dialog that says "Unknown Error Compiling Movie"
There is nothing wrong with my footage. This edit worked fine and I export through Media Encoder many times until I made a Nested Edit within the Premiere Project.
I have tried all sorts of searches on the net for a fix to this but nothing seems to be current or indeed works.
Any help would be appreciated as this is a show stopper.

Thanks for the reply Mark, appreciated.
I have found a work around but it still leaves a long term issue for Adobe to fix.
As to your first solution:
1). The nested edit is already in its own timeline panel. It will not export or encode via media encoder. This is the problem.
2). I will try the KEM roll feature but I have a work around see following.
3). No I do not have a nested edit within a nested edit.
I did a lot of research on the net on this issue as it happened to a colleague of mine on his machine about two weeks ago. It took me six hours to get a fix and in his case there were six video clip that had read errors. When I overwrote those clips from the original backup master it fixed the problem. However I was never able to use Media Encoder again to export his project without it failing. I could only use the Export feature. Again he had used a nested edit in his project.
I my case I do not have any nested edits within a nested edit. All I did was drag my main edit onto the New Sequence icon at the bottom of the Project Bin. This of course created a nested edit in a new Timeline Panel which is what I wanted. I then slid the entire nested edit to the right in the timeline by two seconds as all a wanted to do was add two seconds of black at the head of the edit. That was it. From that point of creating the nested edit Media Encoder and the Export option failed every time with the fore mentioned error.
The final work around was one of those I found previous mention of during my research. I created a new clean Premiere Pro CC 2014 project, I then used the import option under the file menu. I imported only the original main edit which brought in that edit along with all the required footage. This would then export to disk using the Export feature. However, Media Encoder will still not encode this new edit, it fails the same way every time, 'Unknown Error Compiling Movie'.
As a test I loaded the old corrupt edit project back up and deleted the nested edit sequence completely and re-saved it. This had no effect and did not fix the problem. This particular project file will no longer export directly or via media encoder at all no matter what I do.
This seems pretty serious to me. I worked on this edit for a whole month without issue, encoding out roughs as a went without any issue, it was only yesterday after I made the nested edit that the project file is now useless as it will not encode out at all. Yes I have a work around and was able to salvage my project and get it rendered in time for my deadline but the fact I have a partially working Project that Media Encoder will not touch does not instill me with confidence for long term use of Premiere Pro if this is going to happen again.
Is there some place I can send this project file to Adobe to see if they can find out what is wrong with it? I am not the only person having this issue I have seen other post going all the way back through CS6 it seems.

What is the best way to export the data out of BW into a flat file on the S

Hi All,
We are BW 7.01 (EHP 1, Service Pack Level 7).
As part of our BW project scope for our current release, we will be developing certain reports in BW, and for certain reports, the existing legacy reporting system based out of MS Access and the old version of Business Objects Release 2 would be used, with the needed data supplied from the BW system.
What is the best way to export the data out of BW into a flat file on the Server on regular intervals using a process chain?
Thanks in advance,
- Shashi

Hello Shashi,
some comments:
1) An "open hub license" is required for all processes that extract data from BW to a non-SAP system (including APD). Please check with your SAP Account Executive for details.
2) The limitation of 16 key fields is only valid when using open hub for extracting to a DB table. There's no such limitation when writing files.
3) Open hub is the recommended solution since it's the easiest to implement, no programming is required, and you don't have to worry much about scaling with higher data volumes (APD and CRM BAPI are quite different in all of these aspects).
For completeness, here's the most recent documentation which also lists other options:
http://help.sap.com/saphelp_nw73/helpdata/en/0a/0212b4335542a5ae2ecf9a51fbfc96/frameset.htm
Regards,
Marc
SAP Customer Solution Adoption (CSA)

What is the best way to export a slideshow .I like to show my slideshows via appleTV on my TV

What is the best way to export a slideshow.I like to view the show trough AppleTV on my television.

You don't really give us a lot of information to work with, and assume we know something about this mdeia player. The only way to get the slideshow to a media player is to export it from iPhoto. To where? Depends on the media player. Will iTunes work? Depends on the media player. Does the media player have a DVD drive? If so, then burning it to DVD with iDVD will work, but it will be standard def not HD.

HT204655 What is the best way to export a photo from OS X Photos to Photoshop?

What is the best way to export a photo from OS X Photos to Photoshop?

Just a note: if you Option-drag the thumbnail to the Desktop you'll get the original file. Regular dragging will get you the preview version or the edited version if it's been edited in Photos.

What data is contained in the export file for a transportable tablespace?

"This operation will generate an export file, jan_sales.dmp. The export file will be small, because it contains only metadata. In this case, the export file will contain information describing the table temp_jan_sales, such as the column names, column datatype, and all other information that the target Oracle database will need in order to access the objects in ts_temp_sales."
What is the other information?

I don't have the sales dump. I was only quoting from the documentation. What i have is an export of 18 tablespaces - 9 partitioned data tablespaces and 9 partitioned index tablespaces.
What I was trying to determine was if I could still import the tablespaces if the tablespace files were from a time that was after (one week) the original export of the metadata or if there was some bit of information that was held in the metadata which would prevent this.

Any ideas on keeping images on master pages consistently high quality display when exporting to pdf?

Any ideas on keeping images on master pages consistently high quality display when exporting to pdf?

Set up the Preflight panel so it checks image resolution. Ask your printer what the appropriate resolution is for your printing process, and set that in Preflight.

What is parameter id and default component in data element? Help!

Hi experts,
In the further characteristics, What is parameter id and default component name in data element? what are they used for?
Example: S_CARR_ID.
Thanks
Gopal

Hi,
Parameter ID :- Is used for assigning value to field.
Suppose u call a transaction in u porgram.
and u want to assign some value to field before executing the transaction.
if the field has parameter id u can assign value to field before calling the transaction.
that is it take the default value from the memmory.
and u set value in the memmory using parameter id.
----
GET PARAMETER -

Basic form 3
GET PARAMETER ID pid FIELD f.
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See ABAP Unicode - Other Changes
Effect
First, the value stored under the key pid is transferred from the local SAP memory into the field f. If this key is not available in the local SAP memory, the value stored under the same key pid is transferred from the global user-related SAP memory to the field f.
A parameter ID can have up to 20 characters. You can find an overview of the keys (parameters) used in the SAP system description or the appropriate function in the ABAP Workbench.
The Return Code is set as follows:
SY-SUBRC = 0: A value was read from SAP memory. SY-SUBRC = 4: No value was found in SAP memory under the specified key.
Notes
The global user-related SAP memory is available to each user for the entire duration of a terminal session. For this reason, set values are retained when you leave a program.
You should not use SAP memory for temporary storage because a user's parallel sessions use the same global memory.
Example
Read the program name from SAP memory:
DATA : REPID LIKE SY-REPID.
GET PARAMETER ID 'RID' FIELD REPID.
----
SET PARAMETER -
SET PARAMETER ID pid FIELD f.
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See ABAP Unicode - Other Changes
Effect
Writes the contents of the field f to the global user-specific SAP memory and the local transaction-specific SAP memory under the ID pid. Any existing values under the same ID are overwritten.
Parameter IDs can be up to 20 characters long. They cannot consist entirely of spaces. The SAP system description contains an overview of parameter IDs. You can also produce a list using the ABAP Workbench.
Notes
The global, user-specific SAP memory is available to a user for the duration of a single terminal session. Values written to it are retained even when the user exits a program.
Do not use SAP memory as a temporary storage area, since parallel sessions belonging to the same user all use the same memory area.
Only store data of the types C, N, D, and T, as well as structures that consist of these types, in the SAP Memory.
You can create new parameter IDs using the ABAP Workbench.
Parameter IDs may have a namespace prefix.
Example
DATA REPID like sy-repid VALUE 'RSPFPAR'.
SET PARAMETER ID 'RID' FIELD REPID.
Message was edited by: Manoj Gupta

What all files required to be exported to get the project back in future?

hi all,
can anyone please tell me what all files are required for a project to be exported.
i've created a project and now i want to export all the files so that i can get the project in future.
regards,
prateek sharma.

You will want to export Projects, Models, scenarios and logs.
For version Management Please refer following doc (ODI best Practices):
http://www.oracle.com/technology/products/oracle-data-integrator/pdf/odi-bestpractices-datawarehouse-whitepaper.pdf
Espicially Lokk for version management.

What consistent parameter will do in export? advantages?

Similar Messages

Maybe you are looking for