What Container to use for best performance ??

HI ,
Currently i am using HBox as Container for my Custom Itemrenderer , but due to its layout issues , i want it to change the Container from HBox to Panel .
But i am also worried about the performance , how can i make sure that changng containers didn't affected or affected performance of an Application ?? .

You can run your project using "profile" to verify the performance of each instance in your application.
If you really wanna improve the performace, use Canvas instead.
Take a look in this link to know how to use it:
http://help.adobe.com/en_US/flashbuilder/using/WS6f97d7caa66ef6eb1e63e3d11b6c4d0169-8000.h tml
Hope it helps you!
Regards,
Pablo Souza

Similar Messages

  • What settings to use for best surround Music ZX + Logitech Z5500s

    Hey Guys,
    I finally got around to setting up my speakers throughout the room, but I can't get them to sound a good as older gen SB cards. I am looking for a setting that will play the same sound out of all 5 speakers for music. Every mode I use either distorts the sound or it sounds like a tin can in the rear or has missing speakers. The best settings which are not optimal in my opinion is just stereo mode on my sound card. Then changing my speakers to make it stereo x2 which doesn't give me use of the front center speaker. Also probably doesn't give me the best sound for movies. I know some of the issue is due to the cards not having CMSS3D or stereo xpand like the old cards, and the surround modes that are in place now make the rear speakers sound really bad or the music fades in and out. Any help would be appreciated.
    Thank you,

    Originally Posted by applejack
    you could mimic the "stereo surround" feature of the X-Fi by using 3rd party plug-ins for your favorite media player (as log as a relevant config/plugin is available for it).
    for Winamp, download "Matrix Mixer" and setup its mixing matrix so to output L/R to rears and center channels as well, using desired volumes ("1" being 100%, "0.5" being 50% and so on).
    for Foobar2000, download "Channel Mixer" and set its Upmix Mode to "Copy".
    MPC-HC has built-in "Audio Switcher" filter where you could edit custom matrix / channel mapping, or better use AC3Filter and set its own matrix.
    in general, ASIO plug-ins should also enable similar channel mapping functionality.
    Youtube videos could be streamed to MPC-HC via "SVPTube" tool.
    so yea, in order to properly enjoy our stereo music over 5.1 speakers systems with the Z, we must turn to free 3rd party software. as I've learned over the years, once Creative lay out a software package for their product, you can forget about functionality additions in its lifetime. expect bug fixes at the most, which are also pretty rare these days.
    @ProDoctoR1987, while I pretty much enjoyed my X-Fi, it had its own downsides, e.g: regularly managing 3 different modes was a pain in itself. there aren't perfect solutions, we pick our own poison.
    Yeah that's true, but can you compare switching mode to having crappy sound most of the time or having to use 3rd party software and fittle around with that so you hopefully get descent sound out of a +200 euro sound card ?!
    I think the best thing Creative can do is add CMSS 3D like it was with the X-fi series to their software package. Who want's great hardware only to have only good software if it works wich is even a luxury in some cases.

  • For best performance what's the size of an image to be stored in database?

    Hi all,
    can any one tell me..for best performance what's the size of an image to be stored in database?
    is it <256kb  or >256mb?
    when i google  we can store image as varbinary(max) and its limit upto 2GB..
    Can anyone exlain it?
    is it performance wise better..
    thanx in advance..
    lucky

    Your question does not seem apparently meaningful. If you need to store a 5MB image in the database, you store a 5MB image, not a 200 KB image or a 200 MB image. Business needs always trumph performance.
    Not surprisingly, the larger the image the more resources it takes to read and write it.
    What is a meaningful question is whether you should use the FILESTREAM feature or not. The cut-off limit here is usually given as 1MB. That is, if your images typically exceeds 1MB you should use FILESTREAM and access the data through Win32
    API. If your images are generally below this size, you should stick to regular T-SQL.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • How do I access "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...." web sites; when I try to download any alternate browser, then a warning that alternate is "imcompatable with your opera

    How do I access websites that warn: "Firefox is NOT compatible with this application. For best performance, please use Internet Explorer 5.0 and above...."? When I try to download any alternate browser, all I get is another warning that the alternate is "not compatible with your operating system." Is Firefox preventing this? The site listed below is a job application site. I've had this same problem with other job application sites also.
    == URL of affected sites ==
    https://storefront.kenexa.com/lithia/cc/Home.ss

    There should be a User Agent Switcher menu item under Tools, which gives you the browser names you can impersonate.
    The menu item name changes to the browser UA you are presently using.
    There is also a User Agent Switcher button, you can add it using View -> Toolbars -> Customize, and dragging the button to your toolbar.
    See http://chrispederick.com/work/user-agent-switcher/features/ and http://chrispederick.com/work/user-agent-switcher/help/
    You can just start trying IE versions (or the versions it says on the site) until it lets you in.

  • What are the best ways (for best performance) in MII to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?

    Hi All,
    Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
    Thanks

    Hi Surya,
    Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
    1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
    From Shop floor:
    shop floor --> SAP MII --> ECC
    1. Use either Web service or fetch data from DB and pass data to BAPI's  for sending to ECC through BLS transaction.
    Regards,
    Praveen Reddy

  • Optimizing system for best performance/stability and a custom kernel

    I have ArchLinux running on a MacBook 4.1 (early 2008), and it's running very well so far. But I would like to optimize it for best performance and stability (but not at the cost of losing 'graphical interface' quality). I want to compile a custom kernel, and I actually did once, but didn't do it well (and removed it), so I need some help from experts to tell me what should I disable or enable when compiling a custom kernel.
    I will post dmesg and lspci (and rc.conf) here, but if you need any other information, please tell me.
    Thanks.
    Dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.4.4-2-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Sun Jun 24 18:59:47 CEST 2012
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=98afbd56-6ae5-415e-9710-73b8b4ba946c ro quiet add_efi_memmap loglevel=3 console=tty1 splash=silent,fadein,fadeout,theme:arch-banner-icons
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007dd31000 (usable)
    [ 0.000000] BIOS-e820: 000000007dd31000 - 000000007df32000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007df32000 - 000000007dfe5000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007dfe5000 - 000000007dfe7000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007dfe7000 - 000000007eec3000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007eec3000 - 000000007eec5000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007eec5000 - 000000007eec8000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007eec8000 - 000000007eecb000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007eecb000 - 000000007eecc000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007eecc000 - 000000007eedf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007eedf000 - 000000007eef9000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007eef9000 - 000000007eeff000 (reserved)
    [ 0.000000] BIOS-e820: 000000007eeff000 - 000000007ef00000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] DMI: Apple Inc. MacBook4,1/Mac-F22788A9, BIOS MB41.88Z.00C1.B00.0802091535 02/09/08
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x7dd31 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-DFFFF uncachable
    [ 0.000000] E0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 07F000000 mask FFF000000 uncachable
    [ 0.000000] 3 base 07EF00000 mask FFFF00000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-000000007dd31000
    [ 0.000000] 0000000000 - 007dc00000 page 2M
    [ 0.000000] 007dc00000 - 007dd31000 page 4k
    [ 0.000000] kernel direct mapping tables up to 7dd31000 @ 1fffc000-20000000
    [ 0.000000] RAMDISK: 37492000 - 37a41000
    [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 APPLE )
    [ 0.000000] ACPI: XSDT 000000007eeee1c0 00084 (v01 APPLE Apple00 000000C1 01000013)
    [ 0.000000] ACPI: FACP 000000007eeec000 000F4 (v03 APPLE Apple00 000000C1 Loki 0000005F)
    [ 0.000000] ACPI: DSDT 000000007eee1000 045C6 (v01 APPLE MacBook 00040001 INTL 20061109)
    [ 0.000000] ACPI: FACS 000000007eecc000 00040
    [ 0.000000] ACPI: HPET 000000007eeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: APIC 000000007eeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: MCFG 000000007eee9000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: ASF! 000000007eee8000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: SBST 000000007eee7000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: ECDT 000000007eee6000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
    [ 0.000000] ACPI: SSDT 000000007eec7000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 000000007eec6000 0025F (v01 APPLE Cpu0Tst 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 000000007eec5000 000A6 (v01 APPLE Cpu1Tst 00003000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 000000007eee0000 00544 (v01 SataRe SataPri 00001000 INTL 20061109)
    [ 0.000000] ACPI: SSDT 000000007eedf000 00477 (v01 SataRe SataSec 00001000 INTL 20061109)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000007dd31000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000007dd31000
    [ 0.000000] NODE_DATA [000000007dd2d000 - 000000007dd30fff]
    [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007b400000-ffff88007d3fffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] Early memory PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0007dd31
    [ 0.000000] On node 0 totalpages: 515264
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3914 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 7989 pages used for memmap
    [ 0.000000] DMA32 zone: 503292 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:70000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007da00000 s82880 r8192 d23616 u1048576
    [ 0.000000] pcpu-alloc: s82880 r8192 d23616 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 507206
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=98afbd56-6ae5-415e-9710-73b8b4ba946c ro quiet add_efi_memmap loglevel=3 console=tty1 splash=silent,fadein,fadeout,theme:arch-banner-icons
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 2011044k/2061508k available (4538k kernel code, 452k absent, 50012k reserved, 4308k data, 740k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:512 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty1] enabled
    [ 0.000000] allocated 8388608 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration failed
    [ 0.000000] TSC: PIT calibration matches HPET. 2 loops
    [ 0.000000] Detected 2393.995 MHz processor.
    [ 0.010005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.48 BogoMIPS (lpj=7979983)
    [ 0.010013] pid_max: default: 32768 minimum: 301
    [ 0.010061] Security Framework initialized
    [ 0.010069] AppArmor: AppArmor disabled by boot time parameter
    [ 0.010381] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.011643] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.012201] Mount-cache hash table entries: 256
    [ 0.012567] Initializing cgroup subsys cpuacct
    [ 0.012573] Initializing cgroup subsys memory
    [ 0.012588] Initializing cgroup subsys devices
    [ 0.012592] Initializing cgroup subsys freezer
    [ 0.012595] Initializing cgroup subsys net_cls
    [ 0.012599] Initializing cgroup subsys blkio
    [ 0.012653] CPU: Physical Processor ID: 0
    [ 0.012656] CPU: Processor Core ID: 0
    [ 0.012660] mce: CPU supports 6 MCE banks
    [ 0.012673] CPU0: Thermal monitoring enabled (TM2)
    [ 0.012679] using mwait in idle threads.
    [ 0.015816] ACPI: Core revision 20120320
    [ 0.021231] ftrace: allocating 17820 entries in 70 pages
    [ 0.030546] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.064790] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
    [ 0.066663] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.066663] ... version: 2
    [ 0.066663] ... bit width: 40
    [ 0.066663] ... generic registers: 2
    [ 0.066663] ... value mask: 000000ffffffffff
    [ 0.066663] ... max period: 000000007fffffff
    [ 0.066663] ... fixed-purpose events: 3
    [ 0.066663] ... event mask: 0000000700000003
    [ 0.083458] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.103350] Booting Node 0, Processors #1 Ok.
    [ 0.116508] NMI watchdog: enabled, takes one hw-pmu counter.
    [ 0.116575] Brought up 2 CPUs
    [ 0.116579] Total of 2 processors activated (9579.97 BogoMIPS).
    [ 0.120053] devtmpfs: initialized
    [ 0.122018] PM: Registering ACPI NVS region [mem 0x7dd31000-0x7df31fff] (2101248 bytes)
    [ 0.122018] PM: Registering ACPI NVS region [mem 0x7dfe5000-0x7dfe6fff] (8192 bytes)
    [ 0.122018] PM: Registering ACPI NVS region [mem 0x7eec3000-0x7eec4fff] (8192 bytes)
    [ 0.122018] PM: Registering ACPI NVS region [mem 0x7eec8000-0x7eecafff] (12288 bytes)
    [ 0.122018] PM: Registering ACPI NVS region [mem 0x7eecc000-0x7eedefff] (77824 bytes)
    [ 0.123629] NET: Registered protocol family 16
    [ 0.123872] ACPI: bus type pci registered
    [ 0.123988] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
    [ 0.123995] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
    [ 0.124001] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
    [ 0.153700] PCI: Using configuration type 1 for base access
    [ 0.153895] mtrr: your CPUs had inconsistent variable MTRR settings
    [ 0.153899] mtrr: probably your BIOS does not setup all CPUs.
    [ 0.153901] mtrr: corrected configuration.
    [ 0.154568] bio: create slab <bio-0> at 0
    [ 0.154568] ACPI: Added _OSI(Module Device)
    [ 0.154568] ACPI: Added _OSI(Processor Device)
    [ 0.154568] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.154568] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.154919] ACPI: EC: EC description table is found, configuring boot EC
    [ 0.159179] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.160245] ACPI: SSDT 000000007eecaa98 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
    [ 0.160625] ACPI: Dynamic OEM Table Load:
    [ 0.160630] ACPI: SSDT (null) 00340 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
    [ 0.160795] ACPI: SSDT 000000007eec8c18 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
    [ 0.161153] ACPI: Dynamic OEM Table Load:
    [ 0.161158] ACPI: SSDT (null) 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
    [ 0.161186] ACPI: SSDT 000000007eec9f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
    [ 0.161186] ACPI: Dynamic OEM Table Load:
    [ 0.161186] ACPI: SSDT (null) 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
    [ 0.161186] ACPI: SSDT 000000007eec8f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
    [ 0.161187] ACPI: Dynamic OEM Table Load:
    [ 0.161192] ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
    [ 0.161220] ACPI: Interpreter enabled
    [ 0.161220] ACPI: (supports S0 S3 S4 S5)
    [ 0.161220] ACPI: Using IOAPIC for interrupt routing
    [ 0.173742] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.173981] ACPI: No dock devices found.
    [ 0.173988] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.174581] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.175426] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.175431] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.175436] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.175443] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
    [ 0.175505] PCI host bridge to bus 0000:00
    [ 0.175510] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.175514] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.175518] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.175523] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
    [ 0.175539] pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000
    [ 0.175610] pci 0000:00:02.0: [8086:2a02] type 00 class 0x030000
    [ 0.175631] pci 0000:00:02.0: reg 10: [mem 0x90100000-0x901fffff 64bit]
    [ 0.175645] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.175655] pci 0000:00:02.0: reg 20: [io 0x6110-0x6117]
    [ 0.175712] pci 0000:00:02.1: [8086:2a03] type 00 class 0x038000
    [ 0.175730] pci 0000:00:02.1: reg 10: [mem 0x90200000-0x902fffff 64bit]
    [ 0.175849] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
    [ 0.175917] pci 0000:00:1a.0: reg 20: [io 0x60c0-0x60df]
    [ 0.175971] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
    [ 0.176038] pci 0000:00:1a.1: reg 20: [io 0x60a0-0x60bf]
    [ 0.176110] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
    [ 0.176140] pci 0000:00:1a.7: reg 10: [mem 0x90704c00-0x90704fff]
    [ 0.176140] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.176140] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
    [ 0.176140] pci 0000:00:1b.0: reg 10: [mem 0x90700000-0x90703fff 64bit]
    [ 0.176140] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.176140] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
    [ 0.176140] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.176140] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
    [ 0.176140] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.176140] pci 0000:00:1c.5: [8086:2849] type 01 class 0x060400
    [ 0.176140] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.176140] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
    [ 0.176140] pci 0000:00:1d.0: reg 20: [io 0x6080-0x609f]
    [ 0.176140] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
    [ 0.176140] pci 0000:00:1d.1: reg 20: [io 0x6060-0x607f]
    [ 0.176140] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
    [ 0.176140] pci 0000:00:1d.2: reg 20: [io 0x6040-0x605f]
    [ 0.176140] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
    [ 0.176140] pci 0000:00:1d.7: reg 10: [mem 0x90704800-0x90704bff]
    [ 0.176140] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.176140] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.176140] pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100
    [ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
    [ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
    [ 0.176140] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
    [ 0.176140] pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018f
    [ 0.176140] pci 0000:00:1f.1: reg 10: [io 0x6108-0x610f]
    [ 0.176140] pci 0000:00:1f.1: reg 14: [io 0x6124-0x6127]
    [ 0.176140] pci 0000:00:1f.1: reg 18: [io 0x6100-0x6107]
    [ 0.176140] pci 0000:00:1f.1: reg 1c: [io 0x6120-0x6123]
    [ 0.176140] pci 0000:00:1f.1: reg 20: [io 0x60e0-0x60ef]
    [ 0.176140] pci 0000:00:1f.2: [8086:2828] type 00 class 0x01018f
    [ 0.176140] pci 0000:00:1f.2: reg 10: [io 0x60f8-0x60ff]
    [ 0.176140] pci 0000:00:1f.2: reg 14: [io 0x611c-0x611f]
    [ 0.176140] pci 0000:00:1f.2: reg 18: [io 0x60f0-0x60f7]
    [ 0.176140] pci 0000:00:1f.2: reg 1c: [io 0x6118-0x611b]
    [ 0.176140] pci 0000:00:1f.2: reg 20: [io 0x6020-0x602f]
    [ 0.176140] pci 0000:00:1f.2: reg 24: [io 0x4000-0x400f]
    [ 0.176140] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.176140] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
    [ 0.176140] pci 0000:00:1f.3: reg 10: [mem 0x90705000-0x907050ff]
    [ 0.176140] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
    [ 0.176140] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.176140] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff]
    [ 0.176140] pci 0000:02:00.0: [14e4:4328] type 00 class 0x028000
    [ 0.176140] pci 0000:02:00.0: reg 10: [mem 0x90500000-0x90503fff 64bit]
    [ 0.176140] pci 0000:02:00.0: reg 18: [mem 0x90000000-0x900fffff 64bit pref]
    [ 0.176140] pci 0000:02:00.0: supports D1 D2
    [ 0.176140] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.183347] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
    [ 0.183358] pci 0000:00:1c.4: bridge window [mem 0x90500000-0x905fffff]
    [ 0.183369] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]
    [ 0.183595] pci 0000:03:00.0: [11ab:436a] type 00 class 0x020000
    [ 0.183741] pci 0000:03:00.0: reg 10: [mem 0x90400000-0x90403fff 64bit]
    [ 0.183826] pci 0000:03:00.0: reg 18: [io 0x5000-0x50ff]
    [ 0.184121] pci 0000:03:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
    [ 0.184581] pci 0000:03:00.0: supports D1 D2
    [ 0.184585] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.184821] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
    [ 0.184828] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
    [ 0.184836] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff]
    [ 0.184905] pci 0000:04:03.0: [11c1:5811] type 00 class 0x0c0010
    [ 0.184934] pci 0000:04:03.0: reg 10: [mem 0x90300000-0x90300fff]
    [ 0.185056] pci 0000:04:03.0: supports D1 D2
    [ 0.185060] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
    [ 0.185137] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
    [ 0.185148] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff]
    [ 0.185160] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.185165] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.185169] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.185174] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
    [ 0.185211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.185419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
    [ 0.185489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 0.185588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    [ 0.185829] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.186233] pci0000:00: ACPI _OSC control (0x1d) granted
    [ 0.193405] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.193487] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
    [ 0.193565] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [ 0.193642] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.193720] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    [ 0.193797] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
    [ 0.193874] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 0.193957] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 0.196686] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.196707] vgaarb: loaded
    [ 0.196709] vgaarb: bridge control possible 0000:00:02.0
    [ 0.196788] PCI: Using ACPI for IRQ routing
    [ 0.197237] PCI: pci_cache_line_size set to 64 bytes
    [ 0.197407] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
    [ 0.197411] reserve RAM buffer: 000000007dd31000 - 000000007fffffff
    [ 0.197573] NetLabel: Initializing
    [ 0.197576] NetLabel: domain hash size = 128
    [ 0.197579] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.197601] NetLabel: unlabeled traffic allowed by default
    [ 0.197632] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.197640] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.197648] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.210013] Switching to clocksource hpet
    [ 0.222129] pnp: PnP ACPI init
    [ 0.222158] ACPI: bus type pnp registered
    [ 0.222675] pnp 00:00: [bus 00-ff]
    [ 0.222680] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.222684] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.222688] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.222692] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.222696] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.222700] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.222703] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.222707] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.222711] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.222715] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.222718] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.222723] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.222726] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.222735] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.222739] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.222743] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.222746] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.222750] pnp 00:00: [mem 0x80000000-0xfebfffff window]
    [ 0.222859] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.222989] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 0.222993] pnp 00:01: [mem 0xfed14000-0xfed17fff]
    [ 0.222996] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [ 0.223000] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 0.223003] pnp 00:01: [mem 0xf0000000-0xf3ffffff]
    [ 0.223006] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
    [ 0.223010] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
    [ 0.223109] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.223115] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.223119] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.223124] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.223129] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
    [ 0.223134] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.223138] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.223145] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.223455] pnp 00:02: [io 0x0300-0x031f]
    [ 0.223473] pnp 00:02: [irq 6]
    [ 0.223541] pnp 00:02: Plug and Play ACPI device, IDs APP0001 (active)
    [ 0.223606] pnp 00:03: [io 0x0000-0x001f]
    [ 0.223610] pnp 00:03: [io 0x0081-0x0091]
    [ 0.223614] pnp 00:03: [io 0x0093-0x009f]
    [ 0.223617] pnp 00:03: [io 0x00c0-0x00df]
    [ 0.223621] pnp 00:03: [dma 4]
    [ 0.223695] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.223710] pnp 00:04: [mem 0xff000000-0xffffffff]
    [ 0.223778] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.223883] pnp 00:05: [irq 0 disabled]
    [ 0.223893] pnp 00:05: [irq 8]
    [ 0.223897] pnp 00:05: [mem 0xfed00000-0xfed003ff]
    [ 0.224002] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
    [ 0.224009] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [ 0.224028] pnp 00:06: [io 0x00f0]
    [ 0.224038] pnp 00:06: [irq 13]
    [ 0.224112] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.224132] pnp 00:07: [io 0x002e-0x002f]
    [ 0.224136] pnp 00:07: [io 0x004e-0x004f]
    [ 0.224139] pnp 00:07: [io 0x0061]
    [ 0.224142] pnp 00:07: [io 0x0063]
    [ 0.224145] pnp 00:07: [io 0x0065]
    [ 0.224149] pnp 00:07: [io 0x0067]
    [ 0.224151] pnp 00:07: [io 0x0070]
    [ 0.224154] pnp 00:07: [io 0x0080]
    [ 0.224157] pnp 00:07: [io 0x0092]
    [ 0.224161] pnp 00:07: [io 0x00b2-0x00b3]
    [ 0.224164] pnp 00:07: [io 0x0680-0x069f]
    [ 0.224167] pnp 00:07: [io 0x0800-0x080f]
    [ 0.224170] pnp 00:07: [io 0x0810-0x0817]
    [ 0.224173] pnp 00:07: [io 0x0400-0x047f]
    [ 0.224177] pnp 00:07: [io 0x0500-0x053f]
    [ 0.224180] pnp 00:07: [io 0x1640-0x164f]
    [ 0.224302] system 00:07: [io 0x0680-0x069f] has been reserved
    [ 0.224307] system 00:07: [io 0x0800-0x080f] has been reserved
    [ 0.224312] system 00:07: [io 0x0810-0x0817] has been reserved
    [ 0.224316] system 00:07: [io 0x0400-0x047f] has been reserved
    [ 0.224320] system 00:07: [io 0x0500-0x053f] has been reserved
    [ 0.224325] system 00:07: [io 0x1640-0x164f] has been reserved
    [ 0.224331] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.224346] pnp 00:08: [io 0x0070-0x0077]
    [ 0.224417] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.228737] pnp: PnP ACPI: found 9 devices
    [ 0.228741] ACPI: ACPI bus type pnp unregistered
    [ 0.237540] pci 0000:03:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 0.237582] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01-01] add_size 1000
    [ 0.237590] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01-01] add_size 200000
    [ 0.237607] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 02-02] add_size 1000
    [ 0.237623] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff pref] to [bus 03-03] add_size 200000
    [ 0.237646] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.237652] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
    [ 0.237657] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.237662] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.237672] pci 0000:00:1c.0: BAR 15: assigned [mem 0x90800000-0x909fffff 64bit pref]
    [ 0.237678] pci 0000:00:1c.5: BAR 15: assigned [mem 0x90a00000-0x90cfffff pref]
    [ 0.237684] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 0.237689] pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff]
    [ 0.237694] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.237701] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.237710] pci 0000:00:1c.0: bridge window [mem 0x90600000-0x906fffff]
    [ 0.237718] pci 0000:00:1c.0: bridge window [mem 0x90800000-0x909fffff 64bit pref]
    [ 0.237730] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
    [ 0.237736] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
    [ 0.237746] pci 0000:00:1c.4: bridge window [mem 0x90500000-0x905fffff]
    [ 0.237754] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref]
    [ 0.237767] pci 0000:03:00.0: BAR 6: assigned [mem 0x90a00000-0x90a1ffff pref]
    [ 0.237772] pci 0000:00:1c.5: PCI bridge to [bus 03-03]
    [ 0.237777] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
    [ 0.237787] pci 0000:00:1c.5: bridge window [mem 0x90400000-0x904fffff]
    [ 0.237795] pci 0000:00:1c.5: bridge window [mem 0x90a00000-0x90cfffff pref]
    [ 0.237807] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
    [ 0.237816] pci 0000:00:1e.0: bridge window [mem 0x90300000-0x903fffff]
    [ 0.237837] pci 0000:00:1c.0: enabling device (0000 -> 0003)
    [ 0.237918] pci 0000:00:1e.0: power state changed by ACPI to D0
    [ 0.237925] pci 0000:00:1e.0: power state changed by ACPI to D0
    [ 0.237934] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.237942] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.237946] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.237950] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.237954] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
    [ 0.237959] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.237963] pci_bus 0000:01: resource 1 [mem 0x90600000-0x906fffff]
    [ 0.237967] pci_bus 0000:01: resource 2 [mem 0x90800000-0x909fffff 64bit pref]
    [ 0.237972] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    [ 0.237976] pci_bus 0000:02: resource 1 [mem 0x90500000-0x905fffff]
    [ 0.237980] pci_bus 0000:02: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
    [ 0.237984] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
    [ 0.237988] pci_bus 0000:03: resource 1 [mem 0x90400000-0x904fffff]
    [ 0.237992] pci_bus 0000:03: resource 2 [mem 0x90a00000-0x90cfffff pref]
    [ 0.237997] pci_bus 0000:04: resource 1 [mem 0x90300000-0x903fffff]
    [ 0.238001] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    [ 0.238005] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    [ 0.238009] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.238013] pci_bus 0000:04: resource 7 [mem 0x80000000-0xfebfffff]
    [ 0.238088] NET: Registered protocol family 2
    [ 0.238250] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.239170] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    [ 0.241419] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.241995] TCP: Hash tables configured (established 262144 bind 65536)
    [ 0.241999] TCP: reno registered
    [ 0.242015] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.242042] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.242207] NET: Registered protocol family 1
    [ 0.242239] pci 0000:00:02.0: Boot video device
    [ 0.242578] PCI: CLS mismatch (256 != 64), using 64 bytes
    [ 0.242662] Unpacking initramfs...
    [ 0.452648] Freeing initrd memory: 5820k freed
    [ 0.456693] audit: initializing netlink socket (disabled)
    [ 0.456719] type=2000 audit(1340724146.456:1): initialized
    [ 0.457302] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.460514] VFS: Disk quotas dquot_6.5.2
    [ 0.460597] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.460751] msgmni has been set to 3939
    [ 0.461070] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.461121] io scheduler noop registered
    [ 0.461125] io scheduler deadline registered
    [ 0.461224] io scheduler cfq registered (default)
    [ 0.461477] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.461710] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
    [ 0.461950] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
    [ 0.462157] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
    [ 0.462166] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
    [ 0.462198] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
    [ 0.462203] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
    [ 0.462210] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
    [ 0.462242] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
    [ 0.462246] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
    [ 0.462253] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
    [ 0.462369] vesafb: mode is 1024x768x32, linelength=4096, pages=0
    [ 0.462374] vesafb: scrolling: redraw
    [ 0.462379] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.464035] vesafb: framebuffer at 0x80000000, mapped to 0xffffc90004980000, using 3072k, total 3072k
    [ 0.508030] Console: switching to colour frame buffer device 128x48
    [ 0.551844] fb0: VESA VGA frame buffer device
    [ 0.551863] efifb: dmi detected MacBook4,1 - framebuffer at 0x80000000 (1024x768, stride 4096)
    [ 0.551868] intel_idle: does not run on family 6 model 23
    [ 0.551930] GHES: HEST is not enabled!
    [ 0.552035] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.552762] Linux agpgart interface v0.103
    [ 0.552879] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.553759] i8042: No controller found
    [ 0.553878] mousedev: PS/2 mouse device common for all mice
    [ 0.553966] rtc_cmos 00:08: RTC can wake from S4
    [ 0.554165] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
    [ 0.554204] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.554221] cpuidle: using governor ladder
    [ 0.554225] cpuidle: using governor menu
    [ 0.554454] TCP: cubic registered
    [ 0.554641] NET: Registered protocol family 10
    [ 0.554976] NET: Registered protocol family 17
    [ 0.554983] Registering the dns_resolver key type
    [ 0.555206] PM: Hibernation image not present or could not be loaded.
    [ 0.555216] registered taskstats version 1
    [ 0.556175] rtc_cmos 00:08: setting system clock to 2012-06-26 15:22:26 UTC (1340724146)
    [ 0.556299] Initializing network drop monitor service
    [ 0.558944] Freeing unused kernel memory: 740k freed
    [ 0.559290] Write protecting the kernel read-only data: 8192k
    [ 0.568413] Freeing unused kernel memory: 1588k freed
    [ 0.572710] Freeing unused kernel memory: 640k freed
    [ 0.586045] udevd[40]: starting version 185
    [ 0.590818] [drm] Initialized drm 1.1.0 20060810
    [ 0.592306] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
    [ 0.592621] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
    [ 0.594306] agpgart-intel 0000:00:00.0: detected 16384K stolen memory
    [ 0.594543] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
    [ 0.595388] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
    [ 0.595444] ACPI: Lid Switch [LID0]
    [ 0.595539] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 0.595547] ACPI: Power Button [PWRB]
    [ 0.595632] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
    [ 0.595639] ACPI: Sleep Button [SLPB]
    [ 0.595763] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 0.595769] ACPI: Power Button [PWRF]
    [ 0.596508] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
    [ 0.596517] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 0.602545] i915 0000:00:02.0: setting latency timer to 64
    [ 0.749351] i915 0000:00:02.0: irq 43 for MSI/MSI-X
    [ 0.749367] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 0.749370] [drm] Driver supports precise vblank timestamp query.
    [ 0.749462] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.117606] [drm] initialized overlay support
    [ 1.299854] checking generic (80000000 300000) vs hw (80000000 10000000)
    [ 1.299860] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    [ 1.299886] Console: switching to colour dummy device 80x25
    [ 1.301293] fbcon: inteldrmfb (fb0) is primary device
    [ 1.430434] Console: switching to colour frame buffer device 160x50
    [ 1.435865] fb0: inteldrmfb frame buffer device
    [ 1.435868] drm: registered panic notifier
    [ 1.435878] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 1.456696] Refined TSC clocksource calibration: 2393.999 MHz.
    [ 1.456705] Switching to clocksource tsc
    [ 1.821716] usbcore: registered new interface driver usbfs
    [ 1.821753] usbcore: registered new interface driver hub
    [ 1.826806] usbcore: registered new device driver usb
    [ 1.827520] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.827588] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 1.827594] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 1.827633] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 1.827675] ehci_hcd 0000:00:1a.7: debug port 1
    [ 1.831556] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [ 1.831587] ehci_hcd 0000:00:1a.7: irq 21, io mem 0x90704c00
    [ 1.842320] SCSI subsystem initialized
    [ 1.845102] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 1.845354] hub 1-0:1.0: USB hub found
    [ 1.845362] hub 1-0:1.0: 4 ports detected
    [ 1.845549] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 1.845555] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 1.845572] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 1.845613] ehci_hcd 0000:00:1d.7: debug port 1
    [ 1.847254] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.850589] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.850624] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x90704800
    [ 1.851193] libata version 3.00 loaded.
    [ 1.860054] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.860280] hub 2-0:1.0: USB hub found
    [ 1.860289] hub 2-0:1.0: 6 ports detected
    [ 1.860472] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.860478] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 1.860494] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 1.860539] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000060c0
    [ 1.860750] hub 3-0:1.0: USB hub found
    [ 1.860757] hub 3-0:1.0: 2 ports detected
    [ 1.860892] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 1.860898] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 1.860912] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 1.860965] uhci_hcd 0000:00:1a.1: irq 16, io base 0x000060a0
    [ 1.861172] hub 4-0:1.0: USB hub found
    [ 1.861178] hub 4-0:1.0: 2 ports detected
    [ 1.861312] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.861318] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.861332] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    [ 1.861366] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
    [ 1.861578] hub 5-0:1.0: USB hub found
    [ 1.861585] hub 5-0:1.0: 2 ports detected
    [ 1.861717] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.861723] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.861744] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    [ 1.861795] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00006060
    [ 1.862003] hub 6-0:1.0: USB hub found
    [ 1.862010] hub 6-0:1.0: 2 ports detected
    [ 1.862142] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.862148] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.862165] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    [ 1.862200] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006040
    [ 1.862411] hub 7-0:1.0: USB hub found
    [ 1.862417] hub 7-0:1.0: 2 ports detected
    [ 1.862917] ata_piix 0000:00:1f.1: version 2.13
    [ 1.862932] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    [ 1.862937] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
    [ 1.862993] ata_piix 0000:00:1f.1: setting latency timer to 64
    [ 1.869158] scsi0 : ata_piix
    [ 1.874884] scsi1 : ata_piix
    [ 1.875449] ata1: PATA max UDMA/100 cmd 0x6108 ctl 0x6124 bmdma 0x60e0 irq 21
    [ 1.875454] ata2: PATA max UDMA/100 cmd 0x6100 ctl 0x6120 bmdma 0x60e8 irq 21
    [ 1.875665] ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ]
    [ 1.875722] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 1.881780] scsi2 : ata_piix
    [ 1.887944] scsi3 : ata_piix
    [ 1.888739] ata3: SATA max UDMA/133 cmd 0x60f8 ctl 0x611c bmdma 0x6020 irq 18
    [ 1.888745] ata4: SATA max UDMA/133 cmd 0x60f0 ctl 0x6118 bmdma 0x6028 irq 18
    [ 2.033862] ata1.00: ATAPI: MATSHITADVD-R UJ-867, HB01, max UDMA/66
    [ 2.065117] ata1.00: configured for UDMA/66
    [ 2.065887] ata3.00: ATA-8: Hitachi HTS542516K9SA00, BBCAC3GP, max UDMA/133
    [ 2.065893] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.067318] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-867 HB01 PQ: 0 ANSI: 5
    [ 2.077869] ata3.00: configured for UDMA/133
    [ 2.078045] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54251 BBCA PQ: 0 ANSI: 5
    [ 2.087306] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
    [ 2.087313] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.088645] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [ 2.093226] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    [ 2.093312] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.093318] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.093371] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.184704] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
    [ 2.184707] sda3: <bsd:bad subpartition - ignored
    [ 2.184709] bad subpartition - ignored
    [ 2.184710] bad subpartition - ignored
    [ 2.184712] bad subpartition - ignored
    [ 2.184713] >
    [ 2.185557] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.260045] usb 2-4: new high-speed USB device number 2 using ehci_hcd
    [ 2.770036] usb 3-1: new full-speed USB device number 2 using uhci_hcd
    [ 2.948125] usbhid 3-1:1.0: couldn't find an input interrupt endpoint
    [ 2.948381] usbcore: registered new interface driver usbhid
    [ 2.948385] usbhid: USB HID core driver
    [ 3.170028] usb 7-1: new low-speed USB device number 2 using uhci_hcd
    [ 3.179293] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.576705] usb 7-2: new full-speed USB device number 3 using uhci_hcd
    [ 5.022890] udevd[198]: starting version 185
    [ 5.426262] applesmc: SIS!ui16\xffffffc0\xffffffa6: read arg fail
    [ 5.562551] applesmc: key=220 fan=1 temp=10 acc=1 lux=0 kbd=0
    [ 5.562558] applesmc: init_smcreg() took 50 ms
    [ 5.584285] input: applesmc as /devices/platform/applesmc.768/input/input5
    [ 5.658889] lib80211: common routines for IEEE802.11 drivers
    [ 5.658894] lib80211_crypt: registered algorithm 'NULL'
    [ 5.711977] cfg80211: Calling CRDA to update world regulatory domain
    [ 5.924357] wl: module license 'Mixed/Proprietary' taints kernel.
    [ 5.924364] Disabling lock debugging due to kernel taint
    [ 5.946193] INFO @wl_cfg80211_attach : Registered CFG80211 phy
    [ 6.001836] lib80211_crypt: registered algorithm 'TKIP'
    [ 6.002152] eth0: Broadcom BCM4328 802.11 Hybrid Wireless Controller 5.100.82.112
    [ 6.084085] Linux media interface: v0.10
    [ 6.133183] iTCO_vendor_support: vendor-support=0
    [ 6.134458] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
    [ 6.134601] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0460)
    [ 6.134703] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 6.156626] ACPI: Battery Slot [BAT0] (battery absent)
    [ 6.163544] ACPI: AC Adapter [ADP1] (on-line)
    [ 6.164216] ACPI: Requesting acpi_cpufreq
    [ 6.173706] Monitor-Mwait will be used to enter C-1 state
    [ 6.178506] Monitor-Mwait will be used to enter C-2 state
    [ 6.183424] Monitor-Mwait will be used to enter C-3 state
    [ 6.183457] Marking TSC unstable due to TSC halts in idle
    [ 6.183507] ACPI: acpi_idle registered with cpuidle
    [ 6.183963] Switching to clocksource hpet
    [ 6.210896] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
    [ 6.210909] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 6.242033] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 6.275396] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
    [ 6.338786] Linux video capture interface: v2.00
    [ 6.426865] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501)
    [ 6.429319] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
    [ 6.429831] usbcore: registered new interface driver uvcvideo
    [ 6.429835] USB Video Class driver (1.1.1)
    [ 6.496844] firewire_ohci 0000:04:03.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
    [ 6.587003] sky2: driver version 1.30
    [ 6.587217] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
    [ 6.587761] sky2 0000:03:00.0: irq 44 for MSI/MSI-X
    [ 6.588473] sky2 0000:03:00.0: eth1: addr 00:22:41:21:43:0c
    [ 6.654740] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
    [ 6.655770] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 6.661489] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 6.700987] udevd[214]: renamed network interface eth0 to wlan0
    [ 6.824841] hda_codec: ALC889A: SKU not ready 0x400000f0
    [ 6.827442] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
    [ 6.848101] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 6.850714] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 6.942266] appletouch: Geyser mode initialized.
    [ 6.942380] input: appletouch as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input10
    [ 6.942768] usbcore: registered new interface driver appletouch
    [ 6.996893] firewire_core 0000:04:03.0: created device fw0: GUID 002241fffe41d624, S400
    [ 7.131526] apple 0003:05AC:8242.0001: hiddev0,hidraw0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0
    [ 7.135766] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input11
    [ 7.136230] apple 0003:05AC:0229.0002: input,hidraw1: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0
    [ 7.139354] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input12
    [ 7.139526] apple 0003:05AC:0229.0003: input,hidraw2: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input2
    [ 7.423516] usb 3-1: USB disconnect, device number 2
    [ 7.650081] usb 3-1: new full-speed USB device number 3 using uhci_hcd
    [ 8.322211] Bluetooth: Core ver 2.16
    [ 8.322655] NET: Registered protocol family 31
    [ 8.322660] Bluetooth: HCI device and connection manager initialized
    [ 8.322665] Bluetooth: HCI socket layer initialized
    [ 8.322669] Bluetooth: L2CAP socket layer initialized
    [ 8.322680] Bluetooth: SCO socket layer initialized
    [ 8.359817] usbcore: registered new interface driver btusb
    [ 9.183365] EXT4-fs (sda2): re-mounted. Opts: (null)
    [ 9.336886] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [ 9.377553] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 9.380170] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 9.497613] Adding 4184928k swap on /dev/sda5. Priority:-1 extents:1 across:4184928k
    [ 11.804445] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 11.845740] Bluetooth: RFCOMM TTY layer initialized
    [ 11.845751] Bluetooth: RFCOMM socket layer initialized
    [ 11.845755] Bluetooth: RFCOMM ver 1.11
    [ 12.221084] fbsplashd.stati[78]: segfault at 2c ip 000000000040579b sp 00007f2267333d00 error 4 in fbsplashd.static (deleted)[400000+233000]
    [ 24.154605] sky2 0000:03:00.0: eth1: enabling interface
    [ 24.155329] ADDRCONF(NETDEV_UP): eth1: link is not ready
    [ 28.831988] EXT4-fs (sda2): re-mounted. Opts: commit=0
    [ 28.933444] EXT4-fs (sda6): re-mounted. Opts: commit=0
    [ 29.363373] wlan0: no IPv6 routers present
    [ 30.487575] sky2 0000:03:00.0: eth1: disabling interface
    [ 30.500233] sky2 0000:03:00.0: eth1: enabling interface
    [ 30.501015] ADDRCONF(NETDEV_UP): eth1: link is not ready
    [ 40.563473] wlan0: no IPv6 routers present
    [ 45.535875] fuse init (API version 7.18)
    [ 70.827136] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 70.867639] ISO 9660 Extensions: RRIP_1991A
    [ 398.754336] ip_tables: (C) 2000-2006 Netfilter Core Team
    [ 398.776167] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    [ 422.037689] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16396 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
    [ 422.311888] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16397 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
    [ 422.859975] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16398 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
    [ 423.955325] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16399 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
    [ 426.147338] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16400 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
    [ 430.531638] Inbound IN=wlan0 OUT= MAC=00:21:e9:dc:77:c2:00:16:0a:19:9d:62:08:00 SRC=173.194.70.125 DST=192.168.50.100 LEN=78 TOS=0x00 PREC=0x00 TTL=42 ID=16401 PROTO=TCP SPT=5222 DPT=38798 WINDOW=369 RES=0x00 ACK PSH URGP=0
    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
    00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)
    00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 03)
    00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
    00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
    00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
    00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
    00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
    00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
    00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
    02:00.0 Network controller: Broadcom Corporation BCM4321 802.11a/b/g/n (rev 03)
    03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8058 PCI-E Gigabit Ethernet Controller (rev 13)
    04:03.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 61)
    /etc/rc.conf:
    # /etc/rc.conf - Main Configuration for Arch Linux
    # See 'man 5 rc.conf' for more details
    # LOCALIZATION
    HARDWARECLOCK="UTC"
    TIMEZONE="Europe/Skopje"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    LOCALE="en_GB.UTF-8"
    DAEMON_LOCALE="yes"
    USECOLOR="yes"
    # HARDWARE
    MODULES=(applesmc wl uvcvideo)
    USEDMRAID="no"
    USEBTRFS="no"
    USELVM="no"
    # NETWORKING
    HOSTNAME=stefan.local
    interface=
    address=
    netmask=
    broadcast=
    gateway=
    NETWORK_PERSIST="no"
    # DAEMONS
    DAEMONS=(syslog-ng sensors dbus network @firestarter @bluetooth crond cmp-daemon gdm @wicd alsa)
    Thanks

    Army wrote:
    This might not help you a lot, but if you want a stable system, try using packages from the repo wherever possible, look at the news before you update your system and don't mess things up (like bad configuration etc.).
    When it comes to performance, you won't gain much by compiling linux by yourself! Just use the linux package from [core] or if you want a bit more performance, install the ck-kernel from
    [repo-ck]
    Server = http://repo-ck.com/$arch
    (this has to go to the bottom of /etc/pacman.conf)
    (use that one which is best for your cpu (in your case this might be the package linux-ck-corex).
    Hmmm, Linux-ck-corex doesn't even load.. I am now trying to install the generic one. Hope it works.
    Edit: I will first try linux-lqx...
    Last edited by exapplegeek (2012-06-26 18:33:31)

  • What can be used for replacing SELECT SINGLE *   ?

    What can be used for replacing SELECT SINGLE *  for improving the performance in the following statements?
    SELECT SINGLE * FROM REGUV
       WHERE LAUFD = G_WLAUFD "RUN DATE ,SY-DATUM
         AND LAUFI = P_LAUFI.  "IDENTICATION NO
    SELECT SINGLE * FROM T100
       INTO CORRESPONDING FIELDS OF G_T100_WA
        WHERE SPRSL = G_T_IALLMESS-MSGSPRA
          AND ARBGB = G_T_IALLMESS-MSGID
          AND MSGNR = G_T_IALLMESS-MSGNR.
    SELECT SINGLE * FROM TBTCO
       INTO CORRESPONDING FIELDS OF TBTCO
        WHERE JOBNAME = FS_JOBNAME.

    If you need all the fields and you know that only one record exists then u need to use select single * only. You can improve the performance by specifying key fields in the where clause of select statements. If the structure of the work area or internal table in which you are fetching the data is same as that of the database table then no need to use corresponding fields clause.
    Best Regards,
    Vibha
    *Please mark all the helpful answers

  • What is a cache monitoring? and what it is used for?

    what is a cache monitoring? and what it is used for? how safe it is to execute the transaction RSRCACHE in development?
    Thank you,
    York

    Hi Les,
    Cache is a temporary storage for recently accessed data.
    Used to enhance query performance.
    Use t-code RSRT to view more on cache.
    Please see this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/41/b987eb1443534ba78a793f4beed9d5/content.htm
    Cache helps to improve query performance. As it can save data in memory, flatfile, cluster table or BLOB.
    You can remove cache per query or inactivate it for perticular info provider or inactivate it overall.
    But which is not recommended. Yes if u know that certain queries you dont use often and its not accessing large number of records then you can inactivate it for those queries. you can manage cache via three t-codes RSRT or RSRCACHE or SPRO>SAP Reference IMG>SAP Busines Wearhouse--> Reporting relevent setting -->General Reporting Setting in BEX -->Global Cache Setting.
    please follow the link which has few good documents on cache. which will clear your complete concept for cache.
    https://service.sap.com/bi -->Product information previous releases -->BI InfoIndex --> OLAP --> you will get bunch of documents in that.
    Look at the following threads :
    OLAP Cache
    what is cache?
    also check RSRT and OLAP cahce docs
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/afc59790-0201-0010-9f99-940f7c3934fc
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9f4a452b-0301-0010-8ca6-ef25a095834a
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7c361b95-0501-0010-c0ab-897c5aa14504
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/31b6b490-0201-0010-e4b6-a1523327025e
    Hope this helps.
    ****Assign Points if Helpful****
    Regards,
    Ravikanth.

  • What is NTFS used for?

    What is NTFS used for?
    How does it work?

    It's the standard Windows file system.
    During installation, the Microsoft Windows installer asks me to format the Windows partition using NTFS or FAT. Which should I use?
    If the partition is 32 GB or smaller, you can use either FAT or NTFS. If it's larger than 32 GB, or you are installing Microsoft Vista, then you can only format it using NTFS. Mac OS X can read and write FAT volumes, but only read NTFS volumes. Refer to the Microsoft Windows documentation if you are not sure which best suits your needs.
    http://support.apple.com/kb/HT1656

  • Does anyone know what ppqryErrorList is used for in EssOtlQueryMembersEx?

    Given a calcscript, I'm wondering if I can get a list of errors back it has multiple errors (e.g. member not found, syntax error etc.) when I run EssOtlQueryMembersEx.
    I've looked at the documentation (http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_api/api_c/otlc/funcs/apcfqmex.htm) and looks like ppqryErrorList does the job for me. However, I'm getting a NULL pointer to ppqryErrorList regardless or whethere there's an error or not.
    e.g. when I call "@ICHILD(blah)" with EssOtlQueryMembersEx I'm hoping the error list (ppqryErrorList) will contain "member not found blah" but it infact returns NULL.
    This parameter on EssOtlQueryMembersEx must be there for a reason. Does anyone know what this is used for?
    Btw, I'm using Essbase 7
    -Steve

    Well, After Effects has a shattering effect, but I'd guess it was a 3D app that created those effects. To see what you can do with Motion, check out this thread:
    Fun with Shattering...
    Patrick

  • VMware Fusion Ideal Settings for Best performance

    Can someone please help with the ideal settings for VMware Fusion on mac for best performance.
    My Machine Details
    MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3)
    Processor : 2.8 GHz Intel Core
    Memory : 16 GB 1333 MHz DDR3
    Storage : 750 GB SATA Disk
    Graphics : Intel HD Graphics 3000 512 MB
    Am using VMware Fusion Version 4.1.2
    At Present the resources I have allocated for VMFusion are
    Processor      : 1 Core
    Memory         : 4 GB
    Thanks
    Brij

    VMware Fusion doesn't slow down the Mac just because having it installed. You have 16 GB of memory in the computer and you assigned 4 GB for the virtual machine you have, so you shouldn't have any memory problem. Also, your Mac has got a great processor that run virtual machines without any problem.
    If you feel your Mac slow while running the virtual machine, just reduce the amount of memory assigned to the virtual machine, depending on the operating system you have in the virtual machine. For example, I recommend 2 GB or more for Windows 7, and you can run Linux virtualized assigning only 512 MB of memory

  • Help to rewirte query for best performance

    Hi All,
    can you kindly help me to rewirte the below mentioned query for best performance. this is taking more than 20 min in our production server.
    SELECT cp.name,mis.secondary_type U_NAME,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-161,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-154,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-154,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-147,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-147,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-140,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-140,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-133,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-133,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-126,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-126,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-119,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-119,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-112,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-112,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-105,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-105,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-98,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-98,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-91,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-91,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-84,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-84,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-77,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-77,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-70,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-70,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-63,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-63,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-56,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-56,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-49,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-49,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-42,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-42,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-35,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-35,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-28,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-28,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-21,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-21,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-14,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage,
    count(CASE WHEN (mis.start_time between To_DATE(to_char(next_day (sysdate-14,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-7,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))THEN mis.event_audit_id END) Usage
    FROM mis_event_audit mis,USER u,com_pros cp where
    mis.user_id=u.email_address and u.cp_id=cp.cp_id
    and (mis.start_time between To_DATE(to_char(next_day (sysdate-161,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy') and To_DATE(to_char(next_day (sysdate-7,'monday'),'MM/DD/YYYY'),'mm/dd/yyyy'))
    GROUP BY cp.name, mis.secondary_type;
    Thanks,
    krish

    Hi, Krish,
    Something like this will probably be faster, because it cuts out most of the function calls:
    WITH     got_cnt          AS
         SELECT    cp.name
         ,       mis.secondary_type          AS u_name
         ,       COUNT (mis.event_audit_id)     AS cnt
         ,       ( TRUNC (mis.start_time, 'IW')
                - TRUNC (SYSDATE,        'IW')
                ) / 7                    AS week_num
         FROM      mis_event_audit  mis
         JOIN       user_table        u     ON   mis.user_id  = u.email_address     -- USER is not a good table name
         JOIN       com_pros        cp     ON   u.cp_id       = cp.cp_id
         WHERE       mis.start_time   >= TRUNC (SYSDATE, 'IW') - 161
         AND       mis.start_time   <  TRUNC (SYSDATE, 'IW')
         GROUP BY  cp.name
         ,            mis.secondary_type
         ,       TRUNC (mis.start_time, 'IW')
    SELECT       name
    ,       secondary_type
    ,       SUM (CASE WHEN week_num = 22 THEN cnt END)     AS week_23
    ,       SUM (CASE WHEN week_num = 21 THEN cnt END)     AS week_22
    ,       SUM (CASE WHEN week_num = 20 THEN cnt END)     AS week_21
    ,       SUM (CASE WHEN week_num =  0  THEN cnt END)     AS week_1
    FROM       got_cnt
    GROUP BY  name
    ,            secondary_type
    ;TRUNC (d, 'IW')       is midnight on the last Monday before or equal to the DATE d. It does not depend on you NLS settings.
    Whenever you're tempted to write an exprssion as complicated as
    ,     COUNT ( CASE
                       WHEN ( mis.start_time BETWEEN TO_DATE ( TO_CHAR ( NEXT_DAY  ( SYSDATE - 161
                                                                       , 'monday'
                                                  , 'MM/DD/YYYY'
                                        , 'MM/DD/YYYY'
                              AND     TO_DATE ( TO_CHAR ( NEXT_DAY ( SYSDATE - 154
                                                                 ,'monday'
                                                , 'MM/DD/YYYY'
                                          , 'MM/DD/YYYY'
                  THEN mis.event_audit_id
               END
             )               AS usageseek alternate ways. Oracle provides several handy functions, especially for manipulating DATEs. In particular "TO_DATE (TO_CHAR ...)" is almost never needed; think very carefully before doing a round-trip conversion like that.
    Besides being more efficient, this will be easier to debug and maintain.
    If you're using Oracle 11.1 (or higher), then you can also use SELECT ... PIVOT in the main query, but I doubt that will be any faster, and it might not be any simpler.
    I hope this answers your question.
    If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
    Explain, using specific examples, how you get those results from that data.
    Simplify the problem as much as possible. For example, instead of posting a problem that covers the last 23 weeks, pretend that you're only interested in the last 3 weeks. You'll get a solution that's easy to adapt to any number of weeks.
    Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
    See the forum FAQ {message:id=9360002}
    For performance problems, there's another page of the forum FAQ {message:id=9360003}, but, before you start that process, let's get a cleaner query, without so many functions.
    Edited by: Frank Kulash on Oct 2, 2012 11:50 AM
    Changed week_num to be non-negative

  • What are the uses for Macbook pro and Macbook air?

    Hi! I am deciding between MBA and MBP and need to know what the different uses for each one was. Like what would you use the MBA for and what would you use the MBP for?? All opinions welcome!!

    They're actually pretty comparible in what they can do if you're talking about the base model of both (say 13") with 4GB RAM. At that level, the Pro has the advantage if you're going to watch or burn DVD's or CD's, as the Air has no optical drive. But otherwise, they're pretty much the same--full-sized, backlit keyboard, camera, beautiful screen, etc. If you're going for more than a basic 13" Pro, then things start to change. For example, you can get up to 8GB RAM on the Pro, and a huge hard drive, you can also get a 15" or 17" size. You will be paying a lot for these, but, obviously, if you're going to be working on, say, making videos (which you may then want burn onto disk) the Pro is very much what you'll want.
    However, if you don't need or want any of that--if, for example, you plan to do the usual programs (word processing, games, web surfing, music, etc.), then you really won't see much difference between the two. At 4GB RAM and a 13" screen, the big difference is going to be thickness and weight, not power. And in this the Air will have the advantage--it's really amazingly slim, light and with a SSD, faster (you pay extra--a lot extra--to get SSD on the Pro).
    Just to make the point, I switched from a 13" Pro to an 11" Air. My hard drive size is half what it was with a Pro, but I was barely taking up half of that amount on the Pro, and so have plenty of room on my 128GB Air (you can get 256GB for the 11" if you order it online). Absolutely everything my Pro did, my Air does (sans optical drive), only faster and lighter and more compact--meaning it takes up less table space, slips in and out of my bag faster, balances on my lap easier, etc. But there was no interruption of service--I switched pretyt seamlessly from 13" Pro to 11" Air.
    The Pro offers you more options for power, screen size, HD size and optical drive. But it's really pretty surprising how few of us need that much power, that much room, or the optical drive. It's very freeing to realize that less can be more than enough.

  • What is the use for CREATING VIEW WITH CHECK OPTION?

    Dear Legends,
    I have a doubt
    What is the use for creating view?
    A: First Data Integrity, Selecting Particular Columns..
    What is the use for creating a view with check option?
    A: As per oracle manual I read that its a referential integrity check through views.
    A: Enforcing constraints at DB level.
    A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??
    A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???
    Please clear my doubt's Legends
    Lots of Thanks....
    Regards,
    Karthik

    Hi, Karthick,
    karthiksingh_dba wrote:
    ... What is the use for creating view?
    A: First Data Integrity, Selecting Particular Columns..Most views are created and used for convenience. A view is a saved query. If the same operations are often done, then it can be very convenient to code those operations once, in a view, and refer to the view rather than explicitly doing those operations.
    Sometimes, views are created and used for security reasons. For example, you many want to allow some users to see only certain rows or certain columns of a table.
    Views are necessary for INSTEAD OF triggers.
    What is the use for creating a view with check option?
    A: As per oracle manual I read that its a referential integrity check through views.The reason is integrity, not necessarily referential integrity. The CHECK option applies only when DML is done through the view. It prohibits certain changes. For example, if a user can't see certain rows through a view, the CHECK option keeps the user from creating such rows.
    A: Enforcing constraints at DB level.I'm not sure what you mean. Please give an example.
    A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??No. Using CHECK OPTION, you can do some inserts and updates, but not others. The columns involved may or may not have constraints in either case.
    A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???If you try to violate a constraint, you'll get an error. That happens in views with or without the CHECK OPTION, and also in tables.

  • What cable to use for this?

    I am trying to hook up my xbox 360 to my Macbook pro, and I am unsure of what cable to use for this. Composite cables.

    Hi there Dsc, i tried to do so b4, but with limited success, now the problem is like been told you, MBP is not design to accept INPUT video signals, i got something called EYETV coast me about 120$, but the resolution that XBOX accepts is much higher than MBP screen can afford, i got this message when i tried to hook it up ( the dash board came up from the xbox ): YOU NEED TO ADJUST YOUR SCREEN TO A HIGHER ADJUSTMENT BEFORE YOU CAN PLAY GAMES ON THE CONSOL or so, but thats my experience any way, if you succeeded please let me know, by the way i asked the same Q b4, just search my questions and you will see the answers on my question. hope this helped.

Maybe you are looking for

  • IDVD Project Size Stuck @ 4.54 GB

    I created an iDVD project using Magic iDVD and the Pass Through theme (6.0 theme). These are the contents: (1) a main menu movie of 6 MB and a 30-second soundtrack (not the same soundtrack as the movie) (2) 3 submenus with still photos and a 30-secon

  • Apache / PHP / sendmail

    I moved my forums from a hosting provider to my home Arch install.  Currently emails are not being sent out.  I noticed that /usr/sbin/sendmail didn't exist so installed postfix which resolved that issue.  However emails are still not working. Any id

  • 'Page Info' doesn't support HTML5 'meta charset' tag?

    Admittedly this isn't a catastrophic problem, but it seems that the Firefox 'Page Info - General' dialog does not support HTML5's '<meta charset="UTF-8">' tag - the dialog displays an empty line in my Firefox 21.0 browser. If the meta charset tag is

  • [svn:fx-trunk] 10201: Removing special case Container opaqueBackground logic that was added recently as it is no longer required .

    Revision: 10201 Author:   [email protected] Date:     2009-09-12 13:23:35 -0700 (Sat, 12 Sep 2009) Log Message: Removing special case Container opaqueBackground logic that was added recently as it is no longer required. QE notes: None Doc notes: None

  • Web-services Error with 6.1sp3 that doesn't occur with sp2

    I have recently began testing of our application using the newly released weblogic server 6.1 sp3. I took our existing compiled ear file and generated web-services client.jar file from our last weblogic 6.1 sp2 compile, deployed it on the new install