What contols postings to MENGE in new GL?

I have documents (E.g. Price difference postings from MM) in SAP which, when I look at them in BSEG I can see a quantity field (BSEG-MENGE) populated, however when I look at the same document through the New GL tables (FAGLPOSX-MENGE), the field is empty.
Sometimes this field is populated (E.g. with Sales invoice documents) but sometimes it is not as in the example above.
Can anyone help me with how the Quantity field in the new GL is populated? Or suggest a way that I can force BSEG-MENGE to populate the New GL tables?
Many thanks
Phil.

Hi Phil,
Please check if note 960798 describes and furthermore resolves your issue.
Best Regards,
Vanessa Barth.

Similar Messages

TS3297 "iTunes was unable to load data class information from Sync Services." What is this solution for the new phone to sync up with my iTunes acct?

"iTunes was unable to load data class information from Sync Services." What is this solution for this new phone to sync up with my iTunes acct?

Hi tadhunt,
Here is an article that directly addresses that error message:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
http://support.apple.com/kb/ts2690
I hope this helps!
- Ari

What are the defects of the new ipad?

What Are the defects of the new ipad 3?

I have one that I discovered today. With the Apple earphone plugged, the music program came on by itself, started playing parts of radom songs and speeding them up or slowing them down. Does NOT do this without the headphones plugged in.
This is my fourth one and I've never had this issue. I got rid of my cell phone and use Skype with no issues and much cheaper than a cell phone, same clarity and I can call computers, cell phones or land lines at about $3.50 a month. Also free texting on another program.
But I divert myself. Just wanted a second opinon if this is something I should return to the Apple store as it is a month old and should not be doing this. I had planned on calling them tomorrow, but putting the word out tonight.
Thanks,
Steve

Hi, i am not able to get a Free icloud ID. Error is my device is not eligible for creating new free icloud ID. What do i do to create new one

Hi, i am not able to get a Free icloud ID. Error is my device is not eligible for creating new free icloud ID. What do i do to create new one

Sir, your Apple ID can be used as an iCloud account as well. They are both the same thing.
You can learn more from --> Set up your Apple ID for iCloud and iTunes - Apple Support

What is the need of creating New order type in PO

Dear Experts,
I have a doubt in MM, what is the need of creating New Order Types? Please explain with Business scenario. Thanking you,
Regards,
Elangovan.A

Hi Elangovan
Whenever you have a doubt like this...
--- just verify the config settings for your parameter (order type here).
---Also check whether authorizations can be given for this ?
---Do you need it for specific analysis ? Are there standard reports/listings available ?
So, some of the uses of order type are:
1) What are the parameters controlled by order type ?
It controls the number ranges and screen layouts etc. So, if you want to have different set of number ranges and different screen settings, then you may need a new order type.
2) Authorizations can be controlled with order type.
3) You can also use it in analysis/listings
Best regards
Ramki

What is the name of the new apple docking station?

what is the name of the new apple docking station?

I believe it's a face in the Myriad Pro family. The font used in the text on the Graphics page appears to be Myriad Pro Semibold.
These fonts aren't included with OS X.
Hope this helps....

What is the best skin for new Macbook Air 13"?

What is the best skin for new Macbook Air 13"?
I have a new Air and want to protect it from scratches and such.
Thanks in advance

Sorry, I don't like "skins". They inhibit the heat transfer necessary to keep your MBA cool. Get a soft or hard case to store it when not in use. I like Speck products.
Just take care of it. Battle scars make it uniquely yours.

I got this new Ipad. After a month my charger broke. So what I did is got a new charger that is not from Apple company it was from a different company. After 3 week it doesn't work anymore. What do I do. HELP ME PLEASE!!!!!!!!!!!

I got this new Ipad. After a month my charger broke. So what I did is got a new charger that is not from Apple company it was from a different company. After 3 week it doesn't work anymore. What do I do. HELP ME PLEASE!!!!!!!!!!!

Not normal. Take it (iPad, cable & charger) to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

What app is used in the new commercial to show cells undergoing mitosis?

What app is used in the new commercial to show cells undergoing mitosis? I teach Biology and would love to find this one!

I was going by this page - http://www.macrumors.com/2013/02/17/apple-posts-new-alive-ipad-television-ad/
And I found these on Vimeo's web site
http://vimeo.com/53812680
http://vimeo.com/15357750
And they have a bunch more, just search for mitosis on their web site.

What is the use of at new statement?

What is the use of at new statement?

Hi,
AT - itab
Syntax
LOOP AT itab result ...
[AT FIRST.
   ENDAT.]
    [AT NEW comp1.
     ENDAT.
       [AT NEW comp2.
       ENDAT.
       AT END OF comp2.
       ENDAT.]
     AT END OF comp1.
     ENDAT.]
[AT LAST.
ENDAT.]
ENDLOOP.
Extras:
1. ... FIRST
2. ... |{END OF} compi
3. ... LAST
Effect
The statement block of a LOOP loop can contain control structures for control level processing. The respective control statement is AT. The statements AT and ENDAT define statement blocks that are executed at control breaks, that is, when the control structure is changed. The additions to the AT statements determine the control break at which their statement blocks are executed. Within these statement blocks, the statement SUM can be specified to add together the numeric components of a control level. For the output behavior result, the same applies as for LOOP AT.
The prerequisite for control level processing is that the internal table is sorted in exactly the same sequence as the component of its line type - that is, first in accordance with the first component, then in accordance with the second component, and so on. The line structure and the corresponding sorting sequence gives a group structure of the content of the internal table, whose levels can be evaluated using AT statements. The AT- ENDAT control structures must be aligned one after the other, in accordance with the group structure.
The statement blocks within the AT- ENDAT control structures are listed if an appropriate control break is made in the current table line. Statements in the LOOP- ENDLOOP control structure that are not executed within an AT- ENDAT control structure are executed in each pass of the loop.
In order that control level processing is carried out properly, the following rules must be observed:
After LOOP, a restricting condition cond can only be specified if this selects a consecutive line block of the internal table. Otherwise, the behavior of control level processing is undefined.
The internal table cannot be modified within the LOOP loop.
A work area wa specified in the LOOP statement after the addition INTO must be compatible with the line type of the table.
The content of a work area wa specified after the addition INTO in the LOOP statement must not be modified.
If the INTO addition is used in the LOOP statement to assign the content of the current line to a work area wa, its content is changed upon entry into the AT-ENDAT control structure as follows:
The components of the current control key remain unchanged.
All components with a character-type, flat data type to the right of the current control key are set to character "*" in every position.
All the other components to the right of the current control key are set to their initial value.
When the AT-ENDAT control structure is exited, the content of the current table line is assigned to the entire work area wa.
Addition 1
... FIRST
Effect
The control level is defined by the first line of the internal table. The control break takes place when this line is read.
Note
In the group level AT FIRST, the current group key contains no components and all character-type components of the work area wa are filled with "*" and all remaining components are set to their initial value.
Addition 2
... |{END OF} compi/>
Effect
: Control levels are defined by the beginning or end of a group of lines with the same content in the component compi (where i = 1, 2, and so on) and in the components to the left of compi. The control breaks take place when the content of the component compi or another component to the left of compi changes.
The compi components can be specified as described in Specification of Components, with the limitation that access to object attributes is not possible here.
Note
If the INTO or ASSIGNING additions are used in the LOOP statement, a field symbol can be entered after AT |{END OF} outside classes, to which the corresponding component of the work area wa or the field symbol <fs> is assigned. This form of dynamic component specification is obsolete and has been replaced by specification in the format (name).
Addition 3
... LAST
Effect
: The control level is defined by the last line of the internal table. The control break takes place when this line is read.
Note
In the group level AT LAST, the current group key contains no components and all character-type components of the work area wa are filled with "*" and all remaining components are set to their initial value.
Regards,
Prashant

What is exact differernce of at new and at onchange events?

hello,
what is exact differernce of at new and at onchange events?
paramesh.kalluri

Hi,
Usually beofoer processing any internal table,
we use the conrtrol events (AT NEW, AT FIRST, ON CHANGE OF etc) for better formatting options.
When ever we go for these events, its better to sort the table by key fields .
AT NEW-
1) Only opne field can be given.
2) It is a event that is used only with in a internal tabel (LOOP and ENDLOOP) processing.
for ex:
Assume internal table has these fields-
spfli- carrid, connid, fldate.
loop ..
at new connid.
endat.
endloop.
case 1.
at new connid.
On every new value, ie the comobination of both carrid,connid is checked here. For every new combination of both, the control jumps to next statement.
case 2.
at new carrid.
here for every new carrid the event is triggered.
AT NEW <field>- here the position of this field is important in table. based on this postiion it will check the proir feilds aslo
into consideration for trigeerring the event.
ON CHANGE OF <field1> field2>...
1) here we can give any number if fields.
2) the position of the field1 is not considered in the internal table.
3) Its usually used in support projects.
4) If we use this, then its a performance issue because,
internally the field1 is stored in the other filed and this is used to compare for change in value. This rechacking is done internally. Hence it is not used mostly except in support projects.
For ex: on change of connid.
here only for every change in only connid is considered not the prior field ie carrid included. here the position of connid in internal table is not considered.
On change of connid fldate.
here exclusively both are cheked the combination is not considered. separately connid and fldate are cheked. for every new value the evvent is trigggered.
Reward if useful.
Chandralekha

What is my DNS for my new website setup?

What is my DNS for my new website setup?
I am registering my new Domain name with an outside website service (not iWeb). Namecheap.com
What Mac OS X 10.8.2 DNS do I use for my server setup with thru their business? They have asked me this question. Or do I use their default servers as they suggest?
Please help. Thank you in advance for your advice.

It's not entirely clear what you're asking. Are you asking what data you have to provide to your domain registrar? Or are you asking for some configuration data for your machine?
Are you planning/hoping to use your Mac OS X Server as the authoritative DNS server for your domain? (this is usually a bad idea unless you really know what you're doing).
If you're setting up the remote domain on your registrar's servers then there's nothing you need to do for your machine. For simplicity's sake you don't need to do any DNS for your domain on your own server - let the service provider do that. If you want to setup your domain internally as well, then I'd recommend disconnecting your public records (hosted by your service provider) from your private ones (running on your own machine) since you will likely want to hide your internal network addresses from the public.

What responsiblity is requirted to create new Org in Oracle 11i

Can someone please help me .. I want to know what responsibility is required to create new Org in Oracle 11i.
Edited by: aali on 20-Apr-2011 02:16

Hi;
Check your other thread
Re: I am unable to see some Org's from a responsiblity
Regard
Helios

HT1338 i have mac osx 10.5.8 what can i do to get newer version? I tryid almost everything. I am not so god in this. Please help me:-(

i have mac osx 10.5.8 what can i do to get newer version? I tryid almost everything. I am not so god in this. Please help me:-(

The first thing is read:
General Requirements
OS X v10.6.8 or later
2GB of memory
8GB of available space
Some features require an Apple ID; terms apply.
Some features require a compatible Internet service provider; fees may apply.
Supported
Models
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)

Hi, when setting Safari, what is the meaning of "Open New Tabs in Background"? Thank you.

hi, when setting Safari, what is the meaning of "Open New Tabs in Background"? Thank you.

Previously, whenever you wanted to open a new browser window in mobile Safari, or whenever you tapped a link from within another app, Safari created a new page.
But in IOS 5 things have changed, you now have 'open new tabs in background, a great feature.
On any browser window that you have selected in Safari or any linked windows, you open Safari on iPad/iTouch or iPhone you have tabbed browser windows and can go to any of the sites without having to open up a new safari window.
It saves you time.

What contols postings to MENGE in new GL?

Similar Messages

Maybe you are looking for