What controls heading colors in SAP BI 4.0 Web intelligence?

My user is running a crosstab query against the first .unx universe published in production.
We are on SAP BI 4.0 no SP.
When a normal query is run the heading columns default backkground blue and print white.
However, on the crosstab the other groups on top and filters on the left defaulted black print on the blue background. This is a different default than he expected or wanted.
What would have caused this? Can this be set to always default as a single query?
I will tag this question in the Semantic Layer as well because I am being asked did this happen in the Information Design Tool - .unx. or in SAP BO.
See attached snagit of his results.
It's the little things in life that make us go Hmmm?

On XI 3.x, I believe the default appearance settings are governed by an XML file (defaultConfig) and can be changed, if you know what you're doing.
In my installation, the path is:
(INSTALLDIR)...\Business Objects\Tomcat55\webapps\AnalyticalReporting\webiApplet\AppletConfig\defaultConfig.xml
Example:
Can't comment on 4.x though, it may well have changed completely....IIRC it's all CSS based now isn't it?
Edit: Yep - see here: Cascading Style sheet modify for webi in 4.0 | SCN
NMG

Similar Messages

What controls the color of the cursor that selects text when you use the "Edit Document Text" tool?

Hi, I have had a student ask me a question I cannot answer: what controls the color of the cursor that selects text when you use the "Edit Document Text" tool?
I have only seen it appear as a black semicircle over each letter, but at a different computer in our training facility, this same tool appears as an aqua-green highlight.
Is it a preference I never noticed? Thanks for any info.

What version of Acrobat? What operating system?

What is master data in SAP CRM 2007 in Web Client

Hi All,
plz could you explain what is the master data in SAP CRM 2007 In Web client intraction center.
regards,
pasha

Master Data are as under:
Business Partner
Product
IBase
Regards,
Rajesh Banka

What controls the color of a user name in chat

I circled the name fields below so you can see what I mean.
My name (squid) just changed from green to blue.... ???

An old thread, indeed, but for future reference, you are on Facebook and that "little white box" with "13m" on it means that the friend that is online is on a mobile device now and has been inactive for 13 minutes.

List of Values from SAP BW variable in Web Intelligence

Hi Ingo,
We have SAP BW Query Variables with list of values available in Universe and hence Web Intellligence.
These variables are on InfoObjects like Business Partner, Contract Account...etc. The actual values for these objects are in millions. Whenever we use these filters at WebI, its taking too much time to load all those millions of List of Values.
Can you please guide us how to avoid loading these List of Values and provide a text box for user input.
Appreciate your help.
Regards,
Ravi Kumar Garre

Hi,
no - this is a feature you can enable on any List of values including those that are being generated based on BI variable. In the Universe - assuming a query with a BI variable - you will have two List of Value definitions per Variable.
open the properties and set both of them to "Delegated Search", save the universe, export it and then you should see the difference.
ingo

What controls the space above 'maincontent' in CSS layout with header?

In a freshly-downloaded CSS page layout with header (twoColHybLtHdr or similar), there is a space of about 20px between the bottom of the header box and the top of the maincontent box. Because of this space, when a bottom border is added to the header and a left border to maincontent, the two lines don't intersect, which is what I want. What controls this space so I can get rid of it?
Thanks, Joann

Hi Joann,
after formatting your text from "Ueberschrift 1" to "Kein" (translated from German DW)
Header 1
Header 2
all spaces were gone.
Hans-G.

Can not control the color in JOGL

I am a beginner to use JOGL.
I find that I can not control the color, both background and foreground. The background is always Black, and foreground is always Red.
I use canvas.setBackground(Color),
gl.glColor3*(), trying to change the color. But it does not work.
What is the problem?
Thanks.
Toby

A big help for learning JOGL is reading the Red Book from OpenGL, which can be downloaded in pdf. Since JOGL is almost a direct wrapper, the function calls are identical.
To set the background color, you need to add a GLEventListener to the GLCanvas that you're using. To set the background color, in your init() method for GLEventListener do:
public void init(GLAutoDrawable glad) {
GL gl=glad.getGL();
gl.glClearColor(r,g,b);
or something similar, I'm not on my normal computer so this was all from memory. Check the JOGL API for the exact method name for glClearColor. To change the foreground color, there are a bunch of various methods that are all similar to glColor3f(float r,float g,float b).
Calling this on the GL object in the display() method will set the foreground color and everything drawn that isn't using lighting will use this color.

What is the diffrence between sap events and application events

Hi all,
what is the diffrence between sap events and application events.Can any one tell me with examples.
regards,

Hi,
Look at this,
System Events (Default)
The event is passed to the application server, but does not trigger the PAI. If you have registered an event handler method in your ABAP program for the event (using the SET HANDLER statement), this method is executed on the application server.
Within the event handler method, you can use the static method SET_NEW_OK_CODE of the global class CL_GUI_CFW to set a function code and trigger the PAI event yourself. After the PAI has been processed, the PBO event of the next screen is triggered.
The advantage of using this technique is that the event handler method is executed automatically and there are no conflicts with the automatic input checks associated with the screen. The disadvantage is that the contents of the screen fields are not transported to the program, which means that obsolete values could appear on the next screen. You can work around this by using the SET_NEW_OK_CODE method to trigger field transport and the PAI event after the event handler has finished.
Application Events
The event is passed to the application server, and triggers the PAI. The function code that you pass contains an internal identifier. You do not have to evaluate this in your ABAP program. Instead, if you want to handle the event, you must include a method call in a PAI dialog module for the static method DISPATCH of the global class CL_GUI_CFW. If you have defined an event handler method in your ABAP program for the event (using the SET HANDLER statement), the DISPATCH method calls it. After the event handler has been processed, control returns to the PAI event after the DISPATCH statement and PAI processing continues.
The advantage of this is that you can specify yourself the point at which the event is handled, and the contents of the screen fields are transported to the application server beforehand. The disadvantage is that this kind of event handling can lead to conflicts with the automatic input checks on the screen, causing events to be lost.
Hope u understood.
Thanks&Regards,
Ruthra.R

What is the diffrence between SAP View and CAD View ?

What is the diffrence between SAP View and CAD View ?
What is the main purpose of SAP View
and
What is the main purpose of CAD View
On SAP help i found
SAP View is used for :The SAP view displays the SAP structure (document-based structure) for the active CAD object, or another document info record (header document), with a single-level or multilevel document structure in a tree structure. You can variably configure the fields using the layout editor.
CAD View is used for :The CAD view displays the document-based structure of the currently active CAD object, such as the structure of an assembly. The CAD system determines the complete (multilevel) structure and copies it either completely or in stages to the SAP system, in accordance with the default explosion level.
BUT I did not understand it well
Can someone explain this with an example
THanks
Raj

Hello Raj,
SAP View can be further described as the view that is based on what is existing already in the SAP system. This view is generally used by SAP purchasing, MM people etc
CAD view is nothing but the replication of the model tree view in the SAP system. This is used by the design engineer and this view replicates only the parts that are actively displayed on the CAD tool window.
hope this helps. Let me know if you have further questions else please close the message.
regards
N K

How can I tell what control the modulation wheel is assigned to?

Hello,
I understand how to reassign the Mod Wheel and other controls with Command-L. However, once I deleted my learned assignments I realized that the modulation wheel had not been working as it should with the thousands of other presets. Apparently, when I assigned it to the EVP88's Tremolo, it became deactivated from controlling all sorts of fun stuff on the synths.
My questions is in a two parts:
1. If I open up some presets in the ES E (for example), I hear the mod wheel tweaking the sound, but I don't see the control it's manipulating when I'm looking at the instrument window on the screen. How can I find out what control the mod wheel is linked to in each instrument?
2. If I want to reassign the mod wheel on a particular instrument preset, how can I tell logic that this assignment should only be aplicable in a particular preset, and to forget that reassignment when swiching instruments or presets?
Thanks in advance,
I'm proudly 10.6.8 and staying there
Logic 9.1.8
MacBook pro early 2011 refurbished

I don't recall there being a way that I've seen to find out if the Hotspot is connected to Band 4 or Band 13. The diagnostic pages are very basic.
A good rule of thumb with Band 4 is to consider the following. If you have 3 bars or less, you're likely not on Band 4. The device will head to Band 13 as it will usually provide better signal reliability. If you're indoors, you're more likely to be on Band 13.
Also take note that Wi-Fi is a common limiter on the speeds you'll get. You'll usually see nothing more than 30Mbps on most Wireless N devices. Connect to the Hotspot using USB Tethered mode and speeds should be a bit better.

RFFOEDI1 IDOC Control Header - How can multiple payments be included?

When running RFFOEDI1, instead of one payment within one IDOC Control Header (ST=Segment Header), we have a requirement to include multiple IDOC payments within one Control Header. How is this accomplished?
Thanks in advance, Scott

Hi Scott
Were you able to achieve what you wanted with heavy customization.
Regards
Wai Meng

What causes vertical color lines on ipad2 and how do you remove them ?

What causes vertical color lines on an IPad. And how do you remove them ?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
If still present: Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Don't believe it's a factor, but you should update your iOS.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

What is the differenec between 'sap list viewer' and 'abap list viewer'

hi
what is the differenec between 'sap list viewer' and 'abap list viewer'

Hi,
There is no difference between them.SAP List Viewer (ALV) is the new name of the ABAP List Viewer (ALV).
The SAP List Viewer unifies and simplifies the use of lists in the R/3 System. A uniform user interface and list format is available for all lists. This prevents redundant functions.
The SAP List Viewer can be used to view both single-level lists and multilevel sequential lists.
Single-level lists contain any number of lines that have no hierarchical relationship to each other.
Multilevel sequential lists consist of any number of lines that have two hierarchical levels. Multilevel lists have header rows and item rows; the item rows are subordinate to the header rows. For each header row there can be any number of subordinate item rows.
You can view subtotals and totals rows in both single-level lists and multilevel sequential lists
From End User Point it is SAP LIST viewer , From Developer Point of View it is ALV .
Check the Below Link
http://help.sap.com/saphelp_nw04/helpdata/en/66/bc7aab43c211d182b30000e829fbfe/frameset.htm
Regards,
Satish

What is business process in SAP

Could u please tell what is business process in SAP and further what Business process mangement BPM.
Thanks in advance,
vibhuti

Hi
BPM is a part of Netweaver component and is linked with XI
see the links
One of the most powerful feature of XI, Business Process Management:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
Following are the links to weblogs which will help to develop the basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
1) How-to Guides for SAP NetWeaver 2004 for SAP XI:
Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 [original link is broken]
Regards
Anji

Using Live! Card with Audigy control head

)I have Audigy 2ZS and Sounblaster Li've ! cards that I bought new, and I have all the Creative OEM software for both.
I have an Audigy control head that came from a used PC that I picked up.
Can the Audigy control head be used with the Li've! card ? If so, which software do I use ?
The input/output pins seem to match, and I have the correct ribbon cable.
Anyone know about this ?
Thanks,
JS in Las Vegas

David,
If you go into the surround mixer or Windows mixer do you see a listing for the front panel inputs (line in2/mic in2, Aux 2, etc)? If so, are any of them muted? If you go to start/programs/Creative/SB Audigy/Audio HQ/Device Settings, do you show a headphone tab? If so what options are enabled in there?
Double check your ribbon cable connection and maybe even swap sides of the cable.
Jeremy

What controls heading colors in SAP BI 4.0 Web intelligence?

Similar Messages

Maybe you are looking for