What could be causing my multiple response survey question to show a non-response in LMS report?

I have a 10 question survey that has been running fine and providing accurate responses in reports generated from my LMS. I made a property change to a multiple response type question that is now causing the reports to show a date/time (2003-01-01 18:00:00) response instead of the actual multiple responses the user made. The change I made to the question was to change the "Numbers property from" [ a), b), c) ] to [ 1), 2), 3) ]. This property change did not affect the reported responses for the single response questions, only the multi-response. This problem occured Using Captivate 4. I then tried using the same properties in Captivate 5.5 thinking it was a bug in CP4, but got the same results. Has anyone else run into this issue? I'm going to bring this to the attention of my LMS provider, but want to make sure CP is clean first.
Thanks,
Dave

First things first. I am not an LMS expert, so this is not about troubleshooting.
However, to ensure that your course works fine on a SCORM-compliant LMS, you can upload it to cloud.scorm.com and test it out. If the course works fine there, rest assured that it will work fine on any SCORM-compliant LMS. If your LMS team comes back with an issue after this, you can counter them with this evidence that the problem is with the LMS and not your course.
Sreekanth

Similar Messages

THE LINKS AT THE TOP OF ANY WEB PAGE NO LONGER WORK. wHAT COULD BE CAUSING THIS

WITHIN THE LAST FEW DAYS NO MATTER WHAT WEBSITE I GO TO THE LINKS IN THE BANNER OR TOP PORTION OF THE PAGE DO NOT WORK. THE SYSTEM DOESN'T SEEM TO KNOW THAT THEY ARE LINKS WHEN I HOVER OVER THEM I GET THE MOUSE ARROW ICON INSTEAD OF THE HAND LIKE I DO ON ALL OTHER LINKS ON THE PAGE. THE LINKS ON THE SIDES AND BOTTOM OF THE PAGE WORK JUST FINE. WHAT COULD BE CAUSING THIS?

That is a problem with the Yahoo! Toolbar.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Hi, my MacBook Pro has become very slow... what could be causing this and what can I do to fix it?

Hi, my MacBook Pro is working very slowly.. what could be causing it and what can I do to fix it??

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

On my PC, iTunes 11.0.3.42 causes it to hang when attempting to view a .MOV (1.6GB) requiring a cold boot. What could be causing this?

On my PC running windows XP Service Pack 3, iTunes 11.0.3.42 causes it to hang when attempting to view a .MOV (1.6 GB) requiring a cold boot. What could be causing this? Corrupted .MOV? Too little RAM? It successfully plays a 162 MB .MOV.

Hello David,
Thank you for providing all that information about the iTunes issue you are experiencing. We would first want to rule out any software issues before we can determine if it has to do with RAM. I found an article that will help you isolate and troubleshoot software issues that could be causing iTunes to behave this way:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1421
I hope this helps you get back on track with watching movies in iTunes!
Best,
Sheila M.

What could be causing import error?

I purchased a GoPro HERO helmet-mounted digital camera and connected it to my MacBook (OS X 10.5.8) with iMovie (7.1.4) using a USB cable.
The camera produces MP4 files which are visible in finder.
When I open iMovie it identifies and displays the movie clips for importing but at the end of the import process it says "An Error Occurred During Import" and the files are not finally imported. I tried numerous times, even importing one small clip at a time and get the same message.
There is no further information on what could be causing this.
The only way I managed to import these clips was to first copy them to my hard drive and then use the "Import movies" option in iMovie.
Anyone have ideas why I can't import directly from the camera?
Bill.

I changed my directory in Unix to JAVA_TOP and I ran the command as follows -
java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/oracle/apps/gl/translation/webui/AuditDetailPG.xml -username apps -password password -rootdir $JAVA_TOP/ -dbconnection "(description=(address_list=(address=(protocol=tcp)(host=devrdebsdb38.dev.mycompany.com)(port=1553)))(connect_data=(sid=AEBDV02)))"
I get the following error with the above command - Segmentation fault. At least it is not NullPointerException! Any clue to what could be causing a Segmentation fault?

Appears and quickly disappears a new screen overlaying the screen in use, it starts at the bottom of the screen tela.MACbook pro retina.O what could be causing this?

appears and quickly disappears a new screen overlaying the screen in use, it starts at the bottom of the screen tela.MACbook pro retina.O what could be causing this?

Thanks for the suggestion, the next step was to call Apple, who gave me a claim number, which I discovered you must have to get anything done with them. They refered me to a Apple store or repair center, after some reseach took it to the Computer Store in Mobile, Alabama and they were excellent. They took pictures of the screen with bug submitted it to Apple who denied the claim but they kept kicking it up to the next level and finally Apple agreed to sent new cover. The Computer Store had the cover the next day, they changed it out and now I am bug free. If your in the area of Mobile Alabama you can feel good about getting help from the Computer Store. For the two folks that responded to my note, Thank You, good comments and good advice.

RE: (forte-users) What could have caused the StopWatch classto r eturn

Attila
1. Ops - I DO instantiate it as follows:
[snip]
sw : StopWatch = new;
[snip]
I missed the "= new" in the orig mail message (cut/past from wrong
workspace).
2. LogWriter(deltaT:integer, t1:DateTimeData, t2:DateTimeData)
[snip]
task.part.logmgr.put('| ');
task.part.logmgr.put(deltaT);
task.part.logmgr.put(' | ');
task.part.logmgr.put(t1);
task.part.logmgr.put(' | ');
task.part.logmgr.put(t2);
task.part.logmgr.putline(' |');
[snip]
OK, it's just a quick 'n dirty but it does the job for testing.
Regards,
Dirk
-----Original Message-----
From: Attila Rácz [mailto:[email protected]]
Sent: Thursday, 7 October 1999 14:35
To: Haben, Dirk
Subject: Re: (forte-users) What could have caused the
StopWatch class to
return a negative v alue?
Hi Dirk,
1. You don't instantiate the StopWatch object!!! So the
attached code have to
throw a NIL exception. On my PC it does:
"Trying to invoke a method on a NIL object (qqos_StopWatch, 1)."
2. Send the whole LogWriter method for analyzing.
Attila
"Haben, Dirk" wrote:
G'day
Suppose the following output is produced:
Loaded Forte Message Catalog 'fortemsg/en_us.cat'
NLM Startup is Complete - Partition's Locale is 'c'
Loading partition CollectResponseStatistics_cl0_Client built on 30-Sep-1999
09:12:28.
Attached to manager for node BLAH.
%DiH-I-VERID: CollectResponseStatistics_v371.002
%DiH-I-BGP, BGP Started...
%DiH-I, Repeat Interval (in milliseconds) 300000
%DiH-I, Sample Account Number: 123456
%DiH-I-BGPSTART, BackgroundProcessing started at: 07-Oct-1999 08:54:16
| Total Time | Account Fetch | Account Fetch |
| in milliSeconds | Start Time | Completion Time |
|-----------------|----------------------|----------------------|
| -194 | 07-Oct-1999 08:54:16 | 07-Oct-1999 08:54:17 |
What could cause the stopwatch class to return this negative value? Here is
the code that is run:
sw : StopWatch;
//that line is actual as follows:
sw : StopWatch = new;
//*****[Dirk]
>>
BP_t1 : DateTimeData = new;
BP_t2 : DateTimeData = new;
BP_t1.SetCurrent();
self.LogWriter('%DiH-I-BGPSTART, BackgroundProcessing started at: ',BP_t1);
self.LogWriterHeading();
tmpAcc : account = new;
sw.fire();
BP_t1.SetCurrent();
tmpAcc = self.AccountFetch(aAccountNumber);
BP_t2.SetCurrent();
deltaT : Integer = sw.split();
self.LogWriter(deltaT,BP_t1,BP_t2);
Oh, and the logwriter is just a formatted logmgr.put(deltaT) ,
logmgr.put(t1) etc
Any light on this one much appreciated.
Thanks,
Dirk
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to:
[email protected]
Attila Racz Lufthansa
Systems Hungary
BUD LSYH
E-mail: [email protected] .-``'.
Tel.: (36 1) 431-2910 .` .' Mazsa ter 2-6.
Fax : (36 1) 431-2977 _.-' '._ H-1107
Budapest, Hungary

Attila
1. Ops - I DO instantiate it as follows:
[snip]
sw : StopWatch = new;
[snip]
I missed the "= new" in the orig mail message (cut/past from wrong
workspace).
2. LogWriter(deltaT:integer, t1:DateTimeData, t2:DateTimeData)
[snip]
task.part.logmgr.put('| ');
task.part.logmgr.put(deltaT);
task.part.logmgr.put(' | ');
task.part.logmgr.put(t1);
task.part.logmgr.put(' | ');
task.part.logmgr.put(t2);
task.part.logmgr.putline(' |');
[snip]
OK, it's just a quick 'n dirty but it does the job for testing.
Regards,
Dirk
-----Original Message-----
From: Attila Rácz [mailto:[email protected]]
Sent: Thursday, 7 October 1999 14:35
To: Haben, Dirk
Subject: Re: (forte-users) What could have caused the
StopWatch class to
return a negative v alue?
Hi Dirk,
1. You don't instantiate the StopWatch object!!! So the
attached code have to
throw a NIL exception. On my PC it does:
"Trying to invoke a method on a NIL object (qqos_StopWatch, 1)."
2. Send the whole LogWriter method for analyzing.
Attila
"Haben, Dirk" wrote:
G'day
Suppose the following output is produced:
Loaded Forte Message Catalog 'fortemsg/en_us.cat'
NLM Startup is Complete - Partition's Locale is 'c'
Loading partition CollectResponseStatistics_cl0_Client built on 30-Sep-1999
09:12:28.
Attached to manager for node BLAH.
%DiH-I-VERID: CollectResponseStatistics_v371.002
%DiH-I-BGP, BGP Started...
%DiH-I, Repeat Interval (in milliseconds) 300000
%DiH-I, Sample Account Number: 123456
%DiH-I-BGPSTART, BackgroundProcessing started at: 07-Oct-1999 08:54:16
| Total Time | Account Fetch | Account Fetch |
| in milliSeconds | Start Time | Completion Time |
|-----------------|----------------------|----------------------|
| -194 | 07-Oct-1999 08:54:16 | 07-Oct-1999 08:54:17 |
What could cause the stopwatch class to return this negative value? Here is
the code that is run:
sw : StopWatch;
//that line is actual as follows:
sw : StopWatch = new;
//*****[Dirk]
>>
BP_t1 : DateTimeData = new;
BP_t2 : DateTimeData = new;
BP_t1.SetCurrent();
self.LogWriter('%DiH-I-BGPSTART, BackgroundProcessing started at: ',BP_t1);
self.LogWriterHeading();
tmpAcc : account = new;
sw.fire();
BP_t1.SetCurrent();
tmpAcc = self.AccountFetch(aAccountNumber);
BP_t2.SetCurrent();
deltaT : Integer = sw.split();
self.LogWriter(deltaT,BP_t1,BP_t2);
Oh, and the logwriter is just a formatted logmgr.put(deltaT) ,
logmgr.put(t1) etc
Any light on this one much appreciated.
Thanks,
Dirk
For the archives, go to: http://lists.sageit.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to:
[email protected]
Attila Racz Lufthansa
Systems Hungary
BUD LSYH
E-mail: [email protected] .-``'.
Tel.: (36 1) 431-2910 .` .' Mazsa ter 2-6.
Fax : (36 1) 431-2977 _.-' '._ H-1107
Budapest, Hungary

I purchased 2 ipad mini's at Xmas, I then sync'd them with itunes on my pc, and put basically the same apps on each of them. Both are 16gb units. One of them is full ( with over 9gb of "other" memory) the ipad still has 10gb left.What could be causing thi

I purchased 2 ipad mini's at Xmas, I then sync'd them with itunes on my pc, and put basically the same apps on each of them. Both are 16gb units. One of them is full ( with over 9gb of "other" memory) the ipad still has 10gb left.What could be causing this "other" storage

How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
How to Remove “Other” Data from iPhone, iPad and iPod Touch
http://www.igeeksblog.com/how-to-remove-other-data-from-iphone/
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
What is “Other” and What Can I Do About It?
https://discussions.apple.com/docs/DOC-5142
iPhone or iPad Ran Out of Storage Space? Here’s How to Make Space Available Quickly
http://osxdaily.com/2012/06/02/iphone-ipad-ran-out-of-available-storage-space-ho w-to-fix-quick/
6 Tips to Free Up Tons of Storage Space on iPad, iPhone, and iPod Touch
http://osxdaily.com/2012/04/24/6-tips-free-up-storage-space-ipad-iphone-ipod-tou ch/
Also,
How to Clear Message/iMessage Cache on iPhone & iPad And Reclaim Lots of Free Space
http://www.igeeksblog.com/how-to-clear-message-imessage-cache-on-iphone-ipad/
 Cheers, Tom

I have an apogee ensemble that I am using with Logic that was working fine 2 days ago but now it is seeing the apogee but giving me a conflict era and I can't get sound through my mixing board. What could be causing it, I haven't changed any settings

I have an apogee ensemble that I am using with Logic that was working fine 2 days ago but now it is seeing the apogee but giving me a conflict era and I can't get sound through my mixing board. What could be causing it, I haven't changed any settings

OK, but in my ipad, the apple id i have in itues is already the one iwant to have, but th one i used to sin in for i-coud is the other one. Any tip as to how to change the apple id for icloud and any idea how to know what apps i bought with the other apple id so as to delete them from my ipad to avoid being asked to enter another apple id every time they get updated? thanks!

I've just downloaded Sophos (yesterday) and commenced the scan. It keeps stopping part way through, the 2nd time when it was about 98% completed after 4 hours!!!! I've had to start again. What could be causing this? I have Mountain Lion.

I've just downloaded Sophos (yesterday) and commenced the scan. It keeps stopping part way through, the 2nd time when it was about 98% completed after 4 hours!!!! I've had to start again. What could be causing this? I have Mountain Lion.

Thomas A Reed wrote:
You will be advised by people here that Sophos is "junk" and should be removed {...} Sophos actually works pretty well, in my testing, and so I would suspect that there may be an underlying problem with your file system that needs to be repaired.
FWIW, I have used Sophos regularly for several years now (including on my new iMac running Mountain Lion versions 10.8.2 & now 10.8.3) & never had any problems with it on any of the half dozen or so Macs I have installed it on.
Quite a few people automatically assume all Mac A-V software is troublesome junk, & many will leap to the conclusion it is the cause of some problem without considering other potential (& often much more likely) causes, regardless of which A-V product is installed.
Obviously I hope, not all A-V products are alike, so it doesn't make a lot of sense to me to condemn them all because of problems with one of them. Regarding Sophos in particular, finding first hand reports of it causing problems is quite difficult -- typically, if you ask for the details it turns out to be a second or third hand report & there isn't enough info available to know for certain if it is the real cause or not.
This is not to say it is impossible for it to cause problems, just that it is prudent to consider all the possibilities before concluding that any one of them is the cause.

I purchased a refurbished iBook G4-Version 10.4.11 and everytime that I try to purchase anything on iTunes or change something in my account, I click "done" and it says that I have timed out. What could be causing this?

I purchased a refurbished iBook G4-Version 10.4.11 and everytime that I try to purchase anything on iTunes or change something in my account, I click "done" and it says that I have timed out, when I'm on there for less than a minute. Hence, none of my purchases have gone through.What could be causing this?

You need to use a newer Mac OS X version. A G4 can be upgraded to 10.5.8(if desired, buy a retail DVD from a source such as Amazon or eBay), but you'll likely find it more cost-effective to buy a secondhand Intel Mac.
(124606)

Logic Pro 8 crashes every time I press "record." What could be causing this?

Hi,
I have Logic Pro 8 and opened it today for the first time after updating to Snow Leopard. Logic opens just fine, but if I try to record an audio track it crashes almost immediately (I was just using the built-in microphone, nothing external). It doesn't crash if I record to a midi track. Any ideas as to what could be causing this? I went and updated to 8.0.2 and it still did the same thing. This never happened before. I'm wondering if it's related to using Snow Leopard?
Thanks for any advice you might have!

Hi,
All your Creations should be fine...
But just to be Safe, back them up to an External HD and save them as PROJECTS with ALL ASSETS...
Just make sure to have the LP 8 Serial Number handy for when and if, you are asked for it during the Install...
Also, after the Install, don't forget to Run Software Update to get the Latest version of LP 8...
Cheers,

My iPad isn't working properly. When I try to connect to the internet or follow a link it shuts down and returns to the main screen. Any clue as to what could be causing this? Not my internet connection, I checked that.

My iPad isn't working. I cannot follow a link in an email or connect to a game. It goes to a black screen then back to the main screen. Any idea what could be causing this?

Settings > General > Reset > Reset Network Settings
Perform a "hard reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
Then test to see if it solved the problem.

HT4009 I keep getting a message to contact itunes support when I try to make an in app purchase. What could be causing this issue? My credit card is up to date and in app purchases aren't restricted.

I keep getting a message to contact itunes support when I try to make an in app purchase. What could be causing this issue? My credit card is up to date and in app purchases aren't restricted.

Have you tried contacting iTunes Support and asking them ? We are fellow users here on these forums, it could be due to a number of reasons, we won't know which one.
http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I'm getting a syntax error (#10001) with my AI Group Config. What could be causing it?

When I go to run my program, shortly after it starts, it spits out an error #10001 involving the AI Group Config. This is it's suggested explanation:
Ni-DAQ LV: An error was detected in the input string; the arrangement or ordering of the characters in the string is not consistent with the expected ordering.
I've looked to make sure the assigned device name is the same as the expected one, so I know that's not it. Does anyone have any idea what could be causing this?

Hi,
First, i must mention that the way u put it "it spits out an error #10001" sounds horribly good!
Now to the problem, this error is usuall given if you enter an improper channel number(a string instead of numeric)
AI group config is a traditional daq function and channels are reperesented by numerals.
check if you have entered channel numbers in proper syntax.
regards
Dev

What could be causing my multiple response survey question to show a non-response in LMS report?

Similar Messages

Maybe you are looking for