What could cause iPhoto '11 to not update the count of photos in my library?

Hi folks,
I've been adding photos pretty consistently over the last few weeks, and I've noticed the number of photos in my iPhoto library never changes - see below. It's been at 14,774 photos for a number of weeks now. I just imported 17 additional photos, and the 14,774 count didn't change.
Has anyone experienced this? What is the solution to fix? What does it possibly mean, if anything?
Thanks!

In the iPhoto Preferences, turn off items counts and then turn them back on again.

Similar Messages

What can cause "Would you like to update the saved password?" When there is no password saved?

Lately, I am seeing this prompt for "Would you like to update the saved password?" when I log into password protected sites, where there is actually no saved password. Like the Bank of America site, I don't want the browser to save the password. What would cause this? I can just envision me clicking YES to update the saved password, then I have just somehow sent my password to hackers. Is this a known issue, or am i looking at a possible security breach here?

Firefox shows this notification if you use the Password Manager to fill the name and password and you change/modify the password that was previously saved. This can also happen if there is a script running that modifies the password field.
You may disable the remember password incase it's needed by doing the foll:
Tools-> Options -> Security -> Uncheck remember passwords for site.

Bridge work not What could cause that Bridge is not responding. If I open the program works not

Snap nothing like Bridge does not work when I start it. Get the message does not respond. have windows 8

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

What could cause "Internal error: java.lang.NullPointerException: can't not add null to SWF frame" when using compc?

using flex sdk 4.6, and air sdk 15.0.0.356
we get the following error when using compc in our ant build:
[java] Internal error: java.lang.NullPointerException: can't not add null to SWF frame
[java] at com.adobe.flash.swf.SWFFrame.addTag(SWFFrame.java:77)
[java] at com.adobe.flash.compiler.internal.units.requests.SWFTagsRequestResult.addToFrame(SWFTagsR equestResult.java:114)
[java] at com.adobe.flash.compiler.internal.targets.SWFTarget.addCompilationUnitsAndDependenciesToF rame(SWFTarget.java:398)
[java] at com.adobe.flash.compiler.internal.targets.SWFTarget$FramesInformation.createFrame(SWFTarg et.java:838)
[java] at com.adobe.flash.compiler.internal.targets.SWFTarget$FramesInformation.createFrames(SWFTar get.java:875)
[java] at com.adobe.flash.compiler.internal.targets.SWFTarget.build(SWFTarget.java:243)
[java] at com.adobe.flash.compiler.internal.targets.SWCTarget.buildLibrarySWF(SWCTarget.java:348)
[java] at com.adobe.flash.compiler.internal.targets.SWCTarget.build(SWCTarget.java:128)
[java] at com.adobe.flash.compiler.clients.COMPC.buildArtifact(COMPC.java:144)
[java] at com.adobe.flash.compiler.clients.MXMLC.compile(MXMLC.java:541)
[java] at com.adobe.flash.compiler.clients.MXMLC.mainNoExit(MXMLC.java:230)
[java] at com.adobe.flash.compiler.clients.MXMLC.mainNoExit(MXMLC.java:184)
[java] at com.adobe.flash.compiler.clients.COMPC.staticMainNoExit(COMPC.java:75)
[java] at com.adobe.flash.compiler.clients.COMPC.main(COMPC.java:62)
which seems to be rather vague, and offers no clue as to what caused the problem. so, my question is, what could cause this error?
these are the compiler options we use in the build file:
<java jar="${flex.compc.jar}" dir="." fork="true" failonerror="true">
      <jvmarg value="-Xmx512m" />
      <arg line="@{options} ${_compc.libpath} ${_compc.externspath} ${_compc.includespath}" />
      <arg value="+flexlib=${flex.frameworks.dir}" />
      <arg value="-load-config=@{config}" />
      <arg value="-source-path=@{src.dir}" />
      <arg value="-include-sources=@{src.dir}" />
      <arg value="-output=@{dest}" />
      <arg value="-swf-version=@{swf.version}"/>
      <arg value="-debug=${flash.debug}"/>
      <arg value="-advanced-telemetry"/>
</java>
assume that the properties resolve to correct values, since all projects (except one) call this task and compile successfully. the error must come from this one project that fails, but we don't know why.
any ideas?

You could be running out of memory, try increasing the -Xmx512m value to -Xmx1024m or another value that you prefer

What could cause video to freeze up in flash player?

What could cause an .flv to freeze up and not play in the
flash 8 player? After creating a .swf flash movie in Flash Pro 8,
it plays fine, then an hour or 2 later, it freezes up. I re booted
my PC and it again plays fine. Anyone know what could cause my PC
to not play an .flv until I reboot my machine?
Could the flashplayer have encountered the stop() command? It
plays fine for a while so I don’t think that’s the
problem but I could be wrong. I did not add any actionscript to the
video, I just created it by running the Import and export to .swf
commands.
I'm running a W2K machine, 7200 rpm sata drives and 2.5 gig
of ram. I did not upload the .flv and .swf to server yet, just
testing it on my local machine.

Or could this be a problem with my Flash player install?
It's strange 'cause it's an intermittent problem, it works
fine for a while and then it freezes up.

MacBook was restarting on its own and now is not powering up. What could cause this and how to troubleshoot?

MacBook was restarting on its own and now is not powering up. What could cause this and how to troubleshoot?

When did it happen? After updating/upgrading? or just randomly?
You can try to perform a SMC reset and resetting the PRAM:
SMC Reset -> http://support.apple.com/kb/HT3964
PRAM/NVRAM -> http://support.apple.com/kb/ht1379

TS4431 Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?

Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?

Resolve iOS update and restore errors

My Canon EOS Rebel T4i will not operate with a new battery. What could cause this problem?

While take pictures with my Canon EOS Rebel T4i camera it died. I assumed it was a dead battery. Upon charging the battery it would take just a few pictures and die again. I purchased a new cannon battery and fully charged it and now the camera will not even come on. What could cause this?

Sounds like the micro-switch in either the battery door or memory card door is barely making contact. If either of those two doors are opened the camera will immediatley power off. The micro-switch is in the door frame. The door itself has a tab which pushes on the switch.

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

I have two graphics workers on osx 8. They are both complaining that their files are changing label colors on it own. Any idea what could cause this?

I have two graphics workers on osx 8. They are both complaining that their files are changing label colors on it own. Any idea what could cause this?

and there were and have been problems with any two nvidia cards which was the main part of my question.
To provie details try pasting all but serial number from system profile. Sorry but Mac Pro tells me nothing, not model, year, or what graphic card it came with or updated with.

HT4528 One external app on 1st gen iPhone 5. Cellular Network Data Sent = 1.2GB. What could cause such a high usage?

One external app on 1st gen iPhone 5. Cellular Network Data Sent = 1.2GB. What could cause such a high usage?

I had the same issue, whilst my IPhone 5 iOS 7.0.2 was in my pocket all morning, I checked the usage on traffic monitor and it said data usage 1.1 GB. My setting are:
icloud:
mail:off, contacts:on, calenders:on, reminders:on, Safari:off, Notes:on, passbook:on, photos:off, Documents & Data:on(whatsapp only), Find my Iphone:on
itunes & apps store:
music:off, Video:off itunes match:off Automatic downloads music:off, apps:off, books:off, update:off
Podcasts: Auto downloads:off
itunes wifi sync: last sync Friday 11 Oct 2013 (not this morning)
I am using an inmarsat satelite connection if anybody knows any other settings that could cause vast amounts of data to download please advise. After thought would'nt it be nice if apple had an all in one feature(switch) that only allowed Push notifications and safari usage through. Thanks in advance.

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

ITunes could not update the carrier settings on your iPhone

When I try to download and install the new carrier settings file, I get the message "iTunes could not update the carrier settings on your iPhone. You do not have enough access privileges for this operation." (I got a similar message when I tried to download and install the OS update.)
I've been able to work around the problem by creating a different user and installing from there. But I'd like to be able to find and correct the cause of the error message instead of using a workaround. It seems like there's a file or folder somewhere that has somehow become read-only. Does anyone know where iTunes downloads the carrier settings and OS update files?

Jim VanLeeuwen wrote:
You will find them in separate folders within your user account Library/iTunes folder.
That was it. Somehow the owner of ~/Library/iTunes got changed to root.
Jim VanLeeuwen wrote:
Have you tried using Disk Utility to Repair Permissions?
Right after I posted the message I thought that the age-old placebo of repairing permissions might actually fix my problem. Because of your quick reply I found the ownership problem before repairing permissions. So here was the perfect chance for a test. Repair Permissions ran successfully but the owner of ~/Library/iTunes was still root. Repair Permissions fails the test.
I manually changed the owner to steve and was able to download and install the carrier settings.
Thanks!

After editing a RAW photo in PE13 (my External Editor) sent from Apple's iPhoto, I can not reimport the edited photo bank into my iPhoto library. The "Import to Library" command is greyed out. This was not the case before the latest PE13 RAW update versio

After editing a RAW photo in PE13 (my External Editor) originally sent from Apple's iPhoto, I can not reimport the edited photo back into my iPhoto library. The
"Import to Library" command is greyed out. This was not the case until the latest PE13 update (Camera Raw Version 8.7.1.311). What needs to be done
to reimport edited photos back into my iPhoto library? Ideas?

Launch PSE Expert Mode and go to:
Photoshop Elements Editor >> Preferences >> Saving Files (tab)
Set the drop-down dialog
On First Save : Save Over Current File
Click OK.
When you have finished editing in PSE use Cmd+S to save (not Save As)

Windows could not update the computer's boot configuration. via UEFI installation

I recently performed a clean WIndows 8.1 installation using my new Hard drive. However, under UEFI mode from BIOS, everytime the setup process reaches the "Installing Updates" stage, I kept on receiving an error "Windows could not update the
computer's boot configuration, Installation cancelled.
I was a bit puzzled as everytime I install Windows 8.1 via LEGACY mode from BIOS, setup finishes! I cannot tell whether I need to mod my BIOS or what.
please help.
raymund r

Hi,
Please make sure that Delete all partitions/volumes on the disk # (ex: Disk 0) that you want to install Windows 8.1 as UEFI on until that disk # shows as unallocated space.
Try again to install Windows 8.1 again.
If it still fails, please post back the setuperr.log and setupact.log under C:\$WINDOWS.~BT\Sources\Panther\ for our research. You can copy them out in WinPE command mode.
Also, I would like to check if you use bootcamp to install Windows 8.1 on Mac computer. If so, check the solution here:
https://discussions.apple.com/thread/5491283?tstart=0
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Kate Li
TechNet Community Support

What could cause iPhoto '11 to not update the count of photos in my library?

Similar Messages

Maybe you are looking for