What could my card reader issue be?
Context:
PowerMac Dual G4 with 10.3.9, Sakar Digital Concepts CR-35M SD/MMC USB card reader/writer, SanDisk 512MB SD Card, SanDisk 1.0GB SD card.
Background:
Normally, the card reader works fine with our 512MB SanDisk SD cards. They mount and show up in Finder fine. iPhoto is another story, see,http://discussions.apple.com/thread.jspa?threadID=365178&tstart=0. The inlaws are in, and well, they have a 1.0GB SanDisk SD card. When it gets inserted, the card reader's light goes out, then about 20 seconds later it comes back on again, but the card does not mount. I tried two different USB busses, the built in one and the added PCI one. My wife happened to have her work computer booted and available. So, for argument sake, I plugged the reader and 1.0GB card into that Windoze machine, and it worked fine. Are there any insights into what might be wrong?
Later today:
When I return home today, I will try to see how it works on the kid's G3, also running 10.3.9, and I will check with the neighbor, running 10.4.6.
Answer: logic board was frazzling everything.
Similar Messages
-
I keep getting a message to contact itunes support when I try to make an in app purchase. What could be causing this issue? My credit card is up to date and in app purchases aren't restricted.
Have you tried contacting iTunes Support and asking them ? We are fellow users here on these forums, it could be due to a number of reasons, we won't know which one.
http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
Macbook Pro - SD Card Reader Issues Solved!
I recently purchased a gently used, early 2011 MBP. I've had it for a few months, but I did not try using the SD card reader until last week... so much for kicking the tires. Long story short, the darn thing did not recognize or mount one single SD card out of a handful of cards, and at least 3 different card manufacturers all used with my Canon DSLR. I searched the net trying to find a solution and tried everything from sticking the card in at a some strange and ridiculous slant to shutting the computer down three different ways and resetting the System Management Controller (SMC); nothing worked. So today I spent 25 minutes or so chatting with an apple care specialist and they (Jim the apple care guru) finally came up with a solution, even though I'm sure neither one of us knows exactly why it worked. So here goes...
Put your SD card in a external card reader, once it's mounted go to disk utilities and reformat (erase) the drive to Mac OS Extended. Take it out of your external reader and put it in the built-in reader on your Mac. Now, of course, it will no longer work in your camera or most other devices so you'll have to format it again in your device of choice. However, here's the kicker... once I did l all of that and took some quick pics, I put it back in my MBP and it popped right up even after a reboot. But wait there's more.... I then put the SD card in my wife's work laptop (PC running Win8) and played with the files for a bit, then stuck it back in the Mac and it still recognized it. So there goes the "windows screws up the formatting myth).
So naturally I assumed that I would be forced to go through this double formatting process for all of my SD cards (and I have a lot), but then it happened! A Christmas miracle in October. I tried a second card, and then a third and a fourth and a fifth, etc... AND now they ALL pop up just like they should. Without reformatting or any other humanly changed processes. Yep... There you have it, it makes no sense. But it works ;)
Somehow formatting just one card in the card reader "woke up" the whole process, almost like my MBP was like, hmmm I was wondering what you kept sticking inside that's slot of mine...
Hope this helps someone. Sorry for the rant :)Anyone else with card reader issues should read this page. Just because your card reader doesn't appear to be working or has mysteriously dropped off your system doesn't necessarily mean a logic board replacement. I've repaired several portables over the years that had been quoted for costly logic board replacements, when in fact the failures were relatively easy to resolve once you understood the real problem.
It's common belief a PRAM or SMC reset should fix all hardware glitches but sometimes it just doesn't go deep enough, as I found out with my 2011 MBP. Simply removing the battery was all it took to resurrect my seemingly dead card reader, when PRAM and SMC resets failed to have any impact on the problem. -
Card Reader issue on Qosmio F50-10Z
I have had this issue for a while, It began with the original os Vista 32 bit, so i decided to buy the toshiba upgrade cd for windows 7, after upgrading everything worked fine, except the card reader, no matter how many times i installed/uninstalled,installed the driver it would not work!.
So I used the recovery cd, not once BUT TWICE, and to no avail i sent it off to repair.
I got a message on a piece of paper telling me it would work on the original os, i thought they had fixed something.
So i used the recovery cd yet AGAIN, and to my short lifted excitement of seeing no yellow explanation marks i put in a micro sd card (2gb) which initially worked when i first bought this laptop, and got no response.
The bigger problem is my warranty is now finished!, So basicly i have been BUMPED OVER, cause the memory card slot is NOT WORKING, and it wasnt an software related problem!
Any reccomendations?.Hi karimtarek,
Which driver version you are using on Vista and Windows 7? My Qosmio F50 is running Windows 7 and Im using driver version 1.00.29.02 from the Toshiba page.
Are you using the same version?
Furthermore it would be interesting to know if the SD card slot worked after you got the notebook from service center back. Have you tested this before or have you started recovery installation immediately?
Have you tried different brand of SD cards? I always use SanDisk Extreme cards because they never made any problems.
Furthermore you could try updating the BIOS. Maybe it works if you using a pretty old version
Last but not least if its still not work and you think its a hardware malfunction, ask the service centre again. If you speak a little bit with technicians, maybe they can repair it as a gesture of goodwill.
Good luck! :) -
I've read a slew of posts on this issue, and tried the fixes to no avail. My card reader was working (first time ever used) on Aug 2.
On Aug 3, it's not working.
I've tried 3 different cards in it that all work in other devices. I've tried micro sd as well as standard size sd cards.I bought this system on Dec 2, 2014 preloaded with Windows 8.1. My system is completely up to date on its Windows Updates. (I hid the windows ten thingy because I don't want it til they get the problems worked out) It's a C75D-B7260Toshiba Part # PSCLEU-003002The current driver for the RealTek PCIE card reader is 10.0.10130.29089 dated 6-1-2015. I've completely uninstalled thru device manager and then rebooted and reinstalled, which goes successfully. It's always appeared as a device in device manager - but still nothing. I've also tried just disabling, then enabling. Still Nothing. This is the 6th Toshiba I've purchased over many years, and the first one to give me issues like this. I've never called toshiba tech support and now I find out that I have to pay for it if I do?? ABSURD on an issue like this. HELP!! Is it possible that this link might help someone with this? If so, please tell me step by step how to get this installed from the windows KB. MSKB No activity when card insertedJerry_Lippey wrote:
You could also Refresh Windows, of course. But that would involve reinstalling programs. Upgrading to Windows 10 is another possibility.In 30 years of computing (started with the C64) I've never had to restore a system back to "out of the box" status. That scares me more than dealing with the registry, and I know it's just the opposite for most people. I haven't stayed up with the industry in the past 5-6 years so I feel kind of lost when it comes to laptops, tablets and such. I've never had one apart, whereas I've had desktop systems in pieces on the dining room table while building or fixing. Reinstalling certain programs is a royal pain, so I pass on that option for now. As for win 10, no way am I putting that on my system until they get the bugs worked out. Some are having big troubles, and some are gliding thru just fine. Issues with nvidia equipment, task bar issues and more that I'm not willing to deal with. I already uninstalled KB3035583 and turned off automatic update installs to try and avoid MS 'pushing' 10 on me until I want it. Teri -
Hello,
We just purchased a MacBook Pro, 11.3 and have moved all data to new laptop and we have one issue, the Sony card reader does not work on the new laptop. The old laptop is a MacBook Pro from 2010'ish, fairly surprised that a USB device which works on one system doesnt work on another. The Sony card reader is Model MRW62E, dated 2012, I think it is USB v2.0, 5v, etc.
Is this just a case of a reader no longer working/supported by a new design?
Does someone know of a CF & SD card reader that works with the new Mac Book Pros?
Thanks
ErickNo software is required. What specifically are you trying to do? If connected to a camera some cameras require a setting to see the images on the camera and it does not work for all camera. If using the card in the connector it only sees photos and videos if they are in a directory titled DCIM in the root directory. Also, do you have a case? The kit connectors are large and the case can prevent proper seating of the connector in the ipad.
-
Os x crashed. what could have been the issue??? [log attached]
here is the crash log...
Interval Since Last Panic Report: 326223 sec
Panics Since Last Report: 1
Anonymous UUID: B89DF022-5478-F968-7AFD-E80DF31E12C2
Wed Jan 30 09:56:51 2013
panic(cpu 0 caller 0xffffff80048b7bd5): Kernel trap at 0xffffff80048b170b, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x000000010e026000, CR3: 0x00000000074cd000, CR4: 0x0000000000000660
RAX: 0xe85fbfe57668fe73, RBX: 0x0000000000000000, RCX: 0x00000000dfc6abc1, RDX: 0xffffff8007da3260
RSP: 0xffffff80e647baa0, RBP: 0xffffff80e647bad0, RSI: 0x000000000189a740, RDI: 0xffffff8007da3260
R8: 0x0000000000000000, R9: 0xffffff80e647bb64, R10: 0xffffff7f869a2240, R11: 0xffffff8004e7de88
R12: 0x000023ae3ba18cff, R13: 0x0000000000000001, R14: 0xffffff8007da3260, R15: 0x0000000000000000
RFL: 0x0000000000010282, RIP: 0xffffff80048b170b, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000010e026000, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80e647b740 : 0xffffff800481d626
0xffffff80e647b7b0 : 0xffffff80048b7bd5
0xffffff80e647b980 : 0xffffff80048ce4ed
0xffffff80e647b9a0 : 0xffffff80048b170b
0xffffff80e647bad0 : 0xffffff80048acd05
0xffffff80e647baf0 : 0xffffff800484352b
0xffffff80e647bbd0 : 0xffffff80048245ed
0xffffff80e647bc00 : 0xffffff8004c22ca2
0xffffff80e647bc20 : 0xffffff7f8575b3e7
0xffffff80e647bcc0 : 0xffffff7f8575a219
0xffffff80e647bd00 : 0xffffff7f85bae310
0xffffff80e647bd30 : 0xffffff7f86999cda
0xffffff80e647bd50 : 0xffffff7f86999ac6
0xffffff80e647bdb0 : 0xffffff7f85b35234
0xffffff80e647bdf0 : 0xffffff7f85b352f1
0xffffff80e647be00 : 0xffffff7f85b30837
0xffffff80e647be30 : 0xffffff7f85b307b5
0xffffff80e647be60 : 0xffffff7f85b0e949
0xffffff80e647beb0 : 0xffffff7f85b06036
0xffffff80e647bee0 : 0xffffff7f85b05fcd
0xffffff80e647bef0 : 0xffffff7f85b0431d
0xffffff80e647bf30 : 0xffffff7f85b43f07
0xffffff80e647bf50 : 0xffffff7f85b43eb7
0xffffff80e647bf70 : 0xffffff7f85b43f2c
0xffffff80e647bf90 : 0xffffff7f85b44023
0xffffff80e647bfb0 : 0xffffff80048b26b7
Kernel Extensions in backtrace:
com.apple.iokit.IOHIDFamily(1.8)[A8BDA67A-2357-3D32-AD59-A8C4B7352E04]@0xffffff 7f85755000->0xffffff7f857c1fff
dependency: com.apple.driver.AppleKeyStore(28.21)[DC238DEC-B495-31BC-9FDD-0FE8FA1B9D06]@0xf fffff7f85747000
com.apple.iokit.IOBluetoothFamily(4.0.9f33)[1C326A11-ADF7-353E-AD41-458D6A886E0 5]@0xffffff7f85afc000->0xffffff7f85b9cfff
dependency: com.apple.iokit.IOUSBFamily(5.4.0)[C3094550-7F58-3933-A4F7-CD33AE83F8B9]@0xffff ff7f856ce000
com.apple.driver.IOBluetoothHIDDriver(4.0.9f33)[27AA1876-A690-336C-BADB-EA5F95A BDBC4]@0xffffff7f85ba9000->0xffffff7f85bbafff
dependency: com.apple.iokit.IOHIDFamily(1.8.0)[A8BDA67A-2357-3D32-AD59-A8C4B7352E04]@0xffff ff7f85755000
dependency: com.apple.iokit.IOBluetoothFamily(4.0.9f33)[1C326A11-ADF7-353E-AD41-458D6A886E0 5]@0xffffff7f85afc000
com.apple.driver.AppleBluetoothMultitouch(75.15)[861E3E57-3757-3FE3-BD75-A87643 9EAF4C]@0xffffff7f86997000->0xffffff7f869a4fff
dependency: com.apple.iokit.IOBluetoothFamily(4.0.9f33)[1C326A11-ADF7-353E-AD41-458D6A886E0 5]@0xffffff7f85afc000
dependency: com.apple.iokit.IOHIDFamily(1.8.0)[A8BDA67A-2357-3D32-AD59-A8C4B7352E04]@0xffff ff7f85755000
dependency: com.apple.driver.AppleMultitouchDriver(235.28)[D0E53F9B-ECB2-3D1A-B4A8-1296FAE5 59FB]@0xffffff7f866ab000
dependency: com.apple.driver.IOBluetoothHIDDriver(4.0.9f33)[27AA1876-A690-336C-BADB-EA5F95A BDBC4]@0xffffff7f85ba9000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x0000000004600000
Kernel text base: 0xffffff8004800000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 39231231969328
last loaded kext at 22353848429532: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f86a6b000, size 16384)
last unloaded kext at 22546175936628: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f86a6b000, size 12288)
loaded kexts:
com.apple.driver.AppleBluetoothMultitouch 75.15
com.apple.filesystems.msdosfs 1.8
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.0.9f33
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleHDA 2.3.1f2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleBacklight 170.2.3
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.AppleMikeyDriver 2.3.1f2
com.apple.driver.ApplePolicyControl 3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.GeForce 8.0.0
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleIRController 320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AirPort.Brcm4331 602.15.22
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleUSBOHCI 5.2.5
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 165.5
com.apple.driver.AppleHIDKeyboard 165.5
com.apple.driver.IOBluetoothHIDDriver 4.0.9f33
com.apple.driver.AppleMultitouchDriver 235.28
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.3.1f2
com.apple.iokit.IOAudioFamily 1.8.9fc10
com.apple.kext.OSvKernDSPLib 1.6
com.apple.iokit.IOSurface 86.0.3
com.apple.iokit.IOBluetoothFamily 4.0.9f33
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f33
com.apple.driver.AppleHDAController 2.3.1f2
com.apple.iokit.IOHDAFamily 2.3.1f2
com.apple.driver.AppleGraphicsControl 3.2.11
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.iokit.IONDRVSupport 2.3.5
com.apple.iokit.IOGraphicsFamily 2.3.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.driver.NVSMU 2.2.9
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 8 GB, SMC 1.62f6
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x014F, 0x4A4D313036364B534E2D3447202020202020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x014F, 0x4A4D313036364B534E2D3447202020202020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.81.22)
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9250315ASG, 250.06 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: USB Mass Storage Device, 0x14cd (MOAI ELECTRONICS CORPORATION), 0x6116, 0x24100000 / 3
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: USB 2.0 Hub [MTT], 0x1a40 (TERMINUS TECHNOLOGY INC.), 0x0101, 0x26400000 / 3
USB Device: FreeAgent GoFlex, 0x0bc2 (Seagate LLC), 0x5031, 0x26410000 / 5
USB Device: StoreJet Transcend, 0x152d (JMicron Technology Corp.), 0x2329, 0x26420000 / 4
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x06300000 / 2
can someone tell me what went wrong?
Mac OS X 10.7 Help: If “You need to restart your computer” appears
Kernel Panics? Don't panic too! -
Ideapad U160 - Internal Card Reader Issue After Sleep
Hi All.
I've just purchased a Lenovo U160 and I've not been able to solve an issue with the internal card reader. It's a "Realtek USB 2.0 Card Reader" internally wired to the motherboard.
When I got the laptop, I put a Momentus XT in it and installed Windows. I've tried using the drivers that were included on the Lenovo recovery partition, the ones on their website, and the ones direct from Realtek with no success.
The problem is, when my laptop resumes from sleep mode, I get a fair few "new USB device" noises and about the same number of "USB device not recognized" errors. If I look in the device manager when this happens, the card reader is no longer there, and I have an "Unknown Device".
After a shut down, or a reboot, it's back again.
I've tried another clean install of Windows but I'm still having the same issue (I've applied KB974476 and KB978258 before installing the drivers).
There are no sleep options in the BIOS, it's very basic. I am running out of ideas..
Any thoughts?KF8RVmark, welcome to the forum.
Here is a guide to help you troubleshoot your problem with the card reader.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
HP NX 9105 (5-1 Card Reader Issues)
Hello,
I've HP NX 9105 and using Arch Beyond kernel.. Here is my lspci output:
[15:32] (tunix@penguix ~)$ lspci
00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4)
00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6)
00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4)
00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5)
00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2)
00:06.1 Modem: nVidia Corporation Unknown device 00d9 (rev a2)
00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5)
00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 420 Go 32M] (rev a3)
02:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)
02:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:02.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
02:04.0 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01)
02:04.1 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01)
02:04.2 System peripheral: Texas Instruments PCI1620 Firmware Loading Function (rev 01)
I want to get this card reader running.. I remember that Debian was about to get it working (its lights were coming up when inserted a card into the slot) but it couldn't be able to create a node for it..
Any way, Arch doesn't even recognise the card I input.. Dmesg doesn't even a message for card insertion.. Anybody has an idea what should I do ? Thanks a lot..Try either sdhci (included in kernel 2.6.17)
modprobe sdhci
Or tifmxx http://developer.berlios.de/projects/tifmxx/s -
Satellite A355D-S6930 with Windows 7 64 bit. The card reader will work when I first start the computer but once I remove it it will not read it again until I restart the system. This is really annoying. It is the built-in and the card is a 4gb SDHC class 6 card. I've reinstalled the drivers several times and even updated the BIOS a few days ago.
No software is required. What specifically are you trying to do? If connected to a camera some cameras require a setting to see the images on the camera and it does not work for all camera. If using the card in the connector it only sees photos and videos if they are in a directory titled DCIM in the root directory. Also, do you have a case? The kit connectors are large and the case can prevent proper seating of the connector in the ipad.
-
Lightning SD card reader issue with iOS7
Hello,
I have updated yesterday to iOS7 and been impressed to the smooth finish and the handling. Way better then previous versions.
Only downside are the accessories.
I have had no issues with my lighning SD card reader on previous iOS Versions but today I tried to connect it and it said that it is not supported by iPad.
It is an original lightning adapter bought at an Apple shop in Singapore and I cannot imagine that it is not supported by Apple anymore.
I have already rebooted the system a few times and got it working once for a short while until it broke down again with the same error message. I tried as well different SD cards as I thought is might have been an issue with the SD card.
Can anyone help me to fix that issue. Did I miss any setting or does anyone had the same issue?
Thank you for your assistance in advance.Hi
I am using lightning to SD card reader on my iPad mini with iOS 7.
Mine still works, and is surely genuine as I purchased from Apple retail store in Australia however, the reader is now extraordinarily slow to load image previews from the card. Where this was previously near instantaneous on iOS 6, the image previews take 1-2secs to load EACH which is completely ridiculous.
Very frustrating!!!
Apple please fix this. -
SD Card Reader issues - 2011 MBP i7
The last couple of days i began using the SD Card slot (didnt for the first few weeks of picking up the new Mac) and noticed some random inconsistencies with the SD Card Reader.
I have two SD Cards I tried that both exhibit the same issue:
16GB PNY Class-6 SDHC -&- 1GB Lexar SD
I tried them in two (2) 13" 2009 MBP's and they worked flawlessly each time; Insert either card, eject re-inster it again - all fine shows up i can access files, no problem.
with the 15" 2011 i7 2.2ghz - regardless of card they do the same behaviors; i plug an SD card in, sometimes it will show up...then eject it..then may or may not appear the next time.
Try the second card, same thing.
Sometimes they fail to show up regardless multiple times.
however they all work in cameras and USB card readers fine.
(also when plugged into the computer via Camera or USB Card Reader, they appear).
I've done the following;
repair permissions, rebooted, PRAM reset, updated to the special 10.6.7 for 2011 MacBook Pro's, etc.
Cards are fine, something out of whack with the SD Card Reader I imagine.
One thing I did notice the difference between the 2009 13" MBP and the 2011 15" MBP is the SD card connectors are more gold plated on the 2009 13" while he 2011 15" isnt fully gold - which im not sure if that has any bearing on the issue or if its that they changed from being on the USB bus to being on the PCIe Bus?
Thanks for any suggestionsMine had problem too. But the 10.6.8 update fixed this problem on my mac
-
I have a usb 2.0 card reader and it will only mount the cf/sd cards about 5% of the time on 10.9.1(15in). Nothing shows up in Disk Utility and when I try it on my older macbook the reader works every time. When i restart the computer the reader light comes on so I know the computer reckonizes something is plugged in.
yea - good luck. I installed Maverick X into a fully operating Mac Pro 15" - i lost the DVD drive, back up drive, and SD reader. using the "ibook" patch the DVD and external harddrive "returned" but the SD card is still missing.
it shows up if you hard start, but after that its gone again.
Apple tech support is worthless. to attached to the bong to provide answers. they want me to pay to have my computer "fixed" - it wasnt broken till i uploaded Mav X
its pretty obvious that the new Maverick is designed for new devices - that do not include DVD, and SD card readers. its pretty obvious they want youto rely exclusively on the icloud
500 is the new high for this stock -
What could fix my speed issue?
Hi Guys, I recently bought CS6 Production Premium on a Student Discount - I got a new laptop earlier this year with the intent to use it for lots of my editing, however lots of the time when I am editing either 1080i (the format our school cameras record in) or 1080p from our Canon 650D, even with the preview quality set on 1/2 or 1/4, the video can become jumpy and out of sync with the audio, usually solved by stopping the video, rewinding and then starting again. I'm currently editing a production for my school, the videos of the camcorders were MTS files (AVCHD), which I edited separately at first in a multicamera sequence, then exported into a H.264 video for editing in a new sequence (I'm probably crazy doing it this way round, but I'm still learning Premiere Pro) and it can happen every few minutes. The specs of my laptop are below - it's a Sony Vaio, and I believe I met all the specs except the HDD speed (my question!)
Product ID : SVE1512C5E
Description : Laptop SV-E1512C5E - Configurable
Price : 538,48
Memory : 6 GB 1600 MHz DDR3-SDRAM
Hard drive : 500 GB Serial ATA (5400 rpm)
Graphics : AMD Radeon(TM) HD 7650M 2GB
Battery : Battery life up to 4 hours
Keyboard Style : Backlight keyboard
Sony Creative software : No Imagination Studio Suite
Optical Drive : Blu-ray Disc(TM) writer
Wireless LAN : Wireless LAN (IEEE 802.11bgn)
Processor : Intel® CoreTM i5-3210M, 2.5GHz
Display : 39.5cm LED 1366 x 768 + webcam
Finishes : Black
McAfee Security Software : No protection
Adobe® Creation : No Adobe Creation
Adobe® Lightroom® : No Adobe® Lightroom 4
Microsoft® Office 2010 : Office 2010 Trial
Operating system : Windows 8
Language and keyboard : English (QWERTY)
Could the hard drive be the reason behind my issue? The requirements said it should be 7200rpm, but this drive is only 5400rpm. If it is, I'd rather not have to change the drive, but look at an external hard drive instead.
I found on Amazon a Seagate 2tb USB 3.0 hard drive, if I stored all my editing files on that, would I see a speed difference? If not, what else would you suggest?
Thanks in advance.
Jon
Message was edited by: JonITB [fixing formatting]....I have an i7 laptop WITH an NVidia CUDA card......and MTS files are difficult to edit natively.....esp.with more than one track. This AVCHD MTS particular codec is harder to edit than the Canon MOV files from my DSLR.
However, you CAN improve things without buying a whole new laptop to temporarily get by.....it'll still be slow....but, better.
A. USE THE USB3 high speed external port.....connect a cheap, ( $30-50) external USB3 DOCK and plug into it ANY 2.5",or, 3.5" HDD (7,200rpm),or, SSD for a fast location to place your media,( video files)AND all cache and preview files.......project files can remain on slow internal "C" drive.
A super fast,great SSD....the Crucial M4.....has been on sale recently for CHEAP!!!! Ideally, you would make BOTH drives M4's....and scrap the 5400rpm drive. Using USB 3 is buggy....you have to UNCHECK box in Windows device manager ( under "USB3 Root Hub"), which allows Windows to SHUT OFF the drive whenever it wants!
THEN, if drive still won't work right.....enter BIOS on startup and make sure correct selection is made concerning USB3 controller....I had to select "E" something....rather than "X" something to get it to work....now OK with Windows reporting over 300MB per sec. transfers between my internal M4 SSD and external Corsair Force 120 SSD !!!
B. MOST IMPORTANT FOR YOU : you will have to do like everyone in "the old days"....like 2 years ago......and TRANSCODE the sections of footage you want to use as source material into a more "edit friendly" codec for your PC and PPro. Unless you are doing pristeen broadcast work..... esp.as a student.....using MPEG 2 is a fine compromise...yes, you lose a little because of compression, ( not really noticeable...you can test).....but, it stays HD and is MUCH easier for you to work with without creating massive files that need a fast data rate to run......you can reseach many other codecs which will work on weaker, older computers. The free DNxHD for Windows works, too.
C. REALIZE that if you really like to edit HD video a lot........READ THIS FORUM THOROUGHLY and STUDY the PPBM 5, ( 6&7) websites to learn as much as you can about what hardware and what setups work...and what doesn't....before spending any money !!! ALSO REALIZE that continuing to edit on your current system may be HAZARDOUS TO YOUR HEALTH .....CAUSING PREMATURE BALDNESS AND ALZHEIMER'S SYNDROME, AS BY THE TIME YOUR MACHINE FINISHES RENDERING....YOU WILL BE DROOLING OUT OF THE CORNER OF YOUR MOUTH IN A WHEELCHAIR AT THE "RETIRED VIDEO EDITORS OLD AGE RESORT" IN SUN CITY ARIZONA !!!!!!!
*** almost forgot!!!!....connect , using HDMI port, an external HDTV or monitor to see entire user interface......you can select the external as a timeline monitor,or, use it for the PPro interface with the laptop screen as the timeline monitor.
Also, INCREASING YOUR SYSTEM MEMORY MAY HELP......the Sony website says you have 8GB memory....not 6......if you only have two slots, it STILL may be possible to place two matching 8GB sticks in there.......this would help, if possible to do.
best solution : ....BUY NEW MACHINE !!!!! -
can anybody answer this question
Johnso,
Please complete your profile so we at least know a little more about your system, Apple has made quite a few 27" iMac models using different versions of OS X so it would be helpful to us if we knew the model you had and the version of OS X installed.
PLEASE complete your profile, you can find it under Your Stuff and Profile in the upper right of this page.
Maybe you are looking for
-
is it at all posible in java to create you own event s. and have listeners for them like the one ActionListener has the method actionPerformed(ActionEvent e) can i make my own methods that are triggered by events and are only called if a new event is
-
Credit card processing need help
Hi all I am developing a java application for online money transfer. How will I be able to verify peoples credit card or debt card to: a)make sure they are valid ie not suspended or cancelled b)Process the transaction with the person's card company f
-
How can I get this (non-BizTalk) WCF customBinding configuration into BizTalk? (see sample in post)
I have a BizTalk app up and running that is currently using the WCF-BasicHttp Adapter. It's currently using only Message security using the UserName credential type and that is all working fine. Things have since changed, we are now required to accep
-
Add input field with date salector inside a TableView
Im trying to build an user interface for my ones step-screen flow command, this user interface needs a TableView and for each row i need an input field with date selector. Ive been trying to use de DefaultTableViewModel as the model for my TableVie
-
Hi, I'm quite new to programming GUI:s in ABAP so I have a general question for you guys. What are the best options in terms of ABAP language elements(module pools / reports / ABAP Objects ALV classes) to use for programming low to medium complexity