What CPU are you using on your board?

Hi there,
I like to know what CPU you are using at this time.....
Just to see what AMD's are used....
Bas.

Quote
Originally posted by hardwareman
hi there bas,,
I voted for my first AMD XP 2000+ )
and am using the msi KT3Ultra-ARU 8)
greatings!!
Hey man ..
Im runing a KT3Ultra-ARU also .. and I just picked up an AMD XP 2000+ at a Comp show .. and Im haveing a real hard time getting it to run on my mobo ..
I'm haveing trubble at boot , if I get past that I loose my video ...and if I make it past that I get windows to run for only about 20 seconds ..
can anyone offer any advise ..?

Similar Messages

What headphones are you using for your play

Im just curious to find what headphones people are using for there mp3 players, i am using some JVC gummy's there not expenci've at about ?6.99 and they come in about 5 colours which is nice if you have a player like a zen micro, n200 etc...... If you want to know where to get them i got them from dixons, there pretty good Message Edited by sababas on 08-24-2005 0:47 PM

I use Koss SparkPlugs on my N200. Cost about ?5, very comfortable and good sound quality and volume.
PB

What launcher are you using?

What launcher are you using with your Z2?
I'm on Nova Launcher Prime with HERAcon theme and icons.

Apex Launcher

What procedures do you use in your organisation for requirements analysis..

What procedures do you use in your organisation for requirements analysis, quality management and change control for your custom abap development?
which process do you think work best for each stage\phase? is there are sap recommended process for each of these phases?
thanks
Bijo

ezzetabi wrote:I was using terminus, but I found it too thin for my tastes (or maybe for my bad eyes...) so I sought around and I read many persons like the Microsoft's Consolas and I have to say that it is indeed very nice. Probably MS should stop doing OSes and start drawings fonts only...
I never saw this particular font, but I second that, fonts is the only thing MS do well imo
And so I wondered, what do you use? IMO a terminal font should be, readable, monospaced (doh) and a little thick.
Of course if you do not use the terminal this post is not for you.
terminus

What browser are you using with OS 9.x?

Would you all please state which internet browser you are using with OS 9.x and the strengths/weaknesses you are experiencing with it?
I switch back and forth between Mozilla and Internet Explorer but fewer and fewer websites work properly with them. If there is a better browser than those two I would add it to my old Wallstreet running 0S 9.1.
Again, what browser are you using with OS 9.x and what are its good/bad points?
Thanks!
Message was edited by: Paul Stamser

(Almost forgot
I have an iCab filter set up for Yahoo on my OS 9.2.1 iMac.
For the URL string I use (asterisk)yahoo(asterisk)
For the Scripts filter I use the Netscape identity and have all versions checked except "JScript", and everything is checked in the "Allow" section.
For the Network filter I use the Firefox identity and have the HTTP "referer" set to "Always".
I don't use Yahoo Mail much on that machine, but those settings allow me to use the Address book to select addresses and send messages with attachments. (I'm not sure about viewing attachments, though, and I'm almost positive that address auto-complete doesn't work.)
Cheers,
K.S.
(I use iCab 3.0.5)
Message was edited by: K.S.

What Camera are you using?

Hi,
What camera are you using for you shot?Let share about the Semi Pro cam together: Fix Lens with manual Focus and Zoom,Affortable Price...

Well, before I got my Digital Rebel XT I dreamed of the Powershot S2 IS. Then the S3 came out...but I was hookoed on my Rebel XT. I hear the S5 is a monster...
Now, my 20D is probably more prosumer. I wouldn't call it a pro camera, although it is legendary for it's use on the sports areana and weddings by pros. For my money, any camera with a pop-up flash and automatic modes is not a pro camera. Having said that, I hope no one starts throwing eggs and tomatoes!
-Scott

What application are you using for student collaboration?

The only part that is missing from iTunes University is real time student collaboration. What application are you using to bridge the gap? Thanks, Ed

Yeah, I'm not sure I know what you mean either.
Q: If you're asking which server-side code to use on Windows IIs Servers?
A: ASP or ASP.net and MSSql. Since Microsoft built these languages, you would get the best support from MS Expression.
If you're asking for software that helps you write code, you'll need to be more specific about which code you want to write and for what purpose.
Nancy O.

What PSU are you using?

K8N Neo Platinum users (with stable systems!): what power supply are you using?
Please post its specs, namely the 12V rail.
Thanks!
EDIT: Users with a 6800 ESPECIALLY please post! =)

Quote
Mr Woo- I think the question we should all be asking is who is using a high end PSU (30ish 12v amps) and also getting stability problems.
sorry mr woo This thread has been set up by k3nt to acess a specific prob he's having.
Quote
what PSU are you using?
K8N Neo Platinum users (with stable systems!): what power supply are you using?
Please post its specs, namely the 12V rail.
Thanks!
EDIT: Users with a 6800 ESPECIALLY please post! =)
and
Quote
I might be having to replace my Antec Truepower 480. Apparently its 22A on 12V rail is questionable considering my system? See my specs below in sig.
I feel if the thread was as u suggested would just be a mirror of this one
Worst PSU that works on an A64-system?

What cpu do you use?

just wondering if there is potential for a project for P4-optimized repository / or at least kernel26 packages for different architectures
vote what cpu-family you have and not how much the total is ... it's not about frequency, it's about comand-compatibility

sarah31 wrote:then you have to have people in the GRID that you trust. allowing anyone the the ability to alter arch repos is just plain stupid then the develoers lose all control because anyone who wants to mod the packages could. only one or two people should have access to the base repo not every developers.
no intention to allow anyonw to do anything: GRID is centralized: only on one computer you have control over the project ... you only spread the "dirt work of computing" to the clients, that have no possibility to modify
sarah31 wrote:you cannot convince me that a GRID is not a security/control risk. and like i said before regardless of grids or no grids you will still be relying on the devs for properly made builds, etc.
of course you will rely on the devs for properly made builds ... but when the dev starts makepkg, it generates one pkg ... my idea is to, instead of one, generate different pkgs
sarah31 wrote:having three million different architectures also makes managing pacman and such a little more complex.
3<10^6
-P4
-AMD64bit
-PowerMac64bit
sarah31 wrote:who is going to fund all the bandwidth this will use repo wise? i know judd probably does not make enough in donations to pay for it.
that's a good point!
sarah31 wrote:logistically this would be a nightmare imho.
imagine FedEx about 100years ago .. everyone would say something like this would be a nightmare ... but now it's reality
it's not a project for next week ... it's the future 8)

What settings do you use on your X-Fi?

EAX: On, Effects: 0.0dB, DSP: None CMSS3D: Off Crystalizer: Off SVM: Off EQ: Off

well u can go right ahead and turn off that EAX in console, its in no way connected to the EAX in your games, as u said games produce sound through api's in their engines. better look at Alchemy for EAX support in games cuz thats where it is. and ye CMSS3D wont do anything for you since its designed to give additional functionality in surround not stereo systems. and for EQ i tell u to go right and experiment, there is no system that cant use a lil fine tuning to adjust it to your music style, room or just your hearing, we all hear lil diferent.
anyway for reference what "good" speakers are u using?
i got X-Fi Titanium PCI-e over DTS connect to Z-5500
EAX: off? CMSS3D: Stereo surround 50%? Crystalizer: rarely ~30%? SMV: off? EQ: attachment
tbh i assumed wrong, u really have no need for any of the X-Fi functions but if your speakers are at least decent i guarantee u can get more out of them with a proper EQ... and dont read guides how to set up something that is based on personal expirience, there is no "THE RIGHT WAY TO DO IT", try and see what fits you.

What time are you getting to your Apple store to get your Reservation?

As many of you have done, I RESERVED my iPhone 4 at my nearest Apple store, which is a good hour and a half drive from here. I have never stood in line before for an iPhone release, since I usually just wait a few days after the hype to pick one up. Well this year I HAD to have it on release ;)I figured as its a reservation I probably don't have to be there at opening, but since I took the day off work and can't wait to get it, I plan on being there at opening just to be certain. My question to all of you is what time do you plan on getting in line to pick up your reservation? I plan to be by the store by 5am.

markdr wrote:
I would be very careful about that - I dont believe the reservation actually means you are guaranteed one.
Reservations still are first come first serve. Meaning you can reserve your phone out of the quantity that the store will receive to dispurse to those that reserved, but that quantity can still be sold out to those that reserve that are there before you.
Store gets 50 phones from apple. 100 people in line reserved them. 50 ppl get the phones, the other 50 dont.
I may be wrong on this, but dont think I am. Id be really careful and do your research well.
I hope your wrong but I read in another thread where the store will receive as much as are reserved for that store plus some extra for those that didnt reserve/pre-order. I might call and check but that was my understanding. There is a little note at the bottom of the email that says "pre-authorization does not guarentee Iphone availability......", sounds a little open ended to me.

What font do you use in your terminal emulator?

I was using terminus, but I found it too thin for my tastes (or maybe for my bad eyes...) so I sought around and I read many persons like the Microsoft's Consolas and I have to say that it is indeed very nice. Probably MS should stop doing OSes and start drawings fonts only...
And so I wondered, what do you use? IMO a terminal font should be, readable, monospaced (doh) and a little thick.
Of course if you do not use the terminal this post is not for you.
Last edited by ezzetabi (2007-09-20 10:36:52)

ezzetabi wrote:I was using terminus, but I found it too thin for my tastes (or maybe for my bad eyes...) so I sought around and I read many persons like the Microsoft's Consolas and I have to say that it is indeed very nice. Probably MS should stop doing OSes and start drawings fonts only...
I never saw this particular font, but I second that, fonts is the only thing MS do well imo
And so I wondered, what do you use? IMO a terminal font should be, readable, monospaced (doh) and a little thick.
Of course if you do not use the terminal this post is not for you.
terminus

What armband are you using?

Looking for an armband to use that can accomodate receiver. Just wondering what armbands people were using.
I don't really like the nike armband.

Xtreme mac Sport Wrap http://www.xtrememac.com/cases/nano/sportwrap.php
It's comfortable on either wrist or arm & has a screen. (It has two straps in different sizes.)
I cut a small slit with a box cutter in bottom of the sport case to fit Nike+ sensor and put a hole for the earplug cord. The neoprene has not stretched or torn so it holds the Nano firmily in place (despite the slit--which looks like it was meant to be there--not jagged or rough).
I wear this on my wrist so that I can see the dial. No matter how much I perspire, the Nano does not get wet because it is not flat against my wrist. You couldn't pay me to use a screenless arm/wristband.

Poll: How many users on your apps and what hardware are you using?

I am curious about the collective experience and performance of others APEX applications and how much "horsepower" your hardware has.
I have a need to support 20-30 users and am using a Windows XP machine with 1.99 Gig of RAM and a 2.8 GHz Pentium 4 CPU.
Any thoughts on this?

For my personal use, I'm renting a Celeron 2.4ghz with 1Gig RAM running CentOS, Oracle XE and Apex 3.2 at a data center 1200 miles away. Seems to work fine. I find the biggest issue is network bandwidth. I originally had a 10Mb link to the datacenter's backbone, now have a 100Mbit. The difference was night and day.
For work (speaking only of our Apex servers), we've got:
One Dell 2way P4 with 4G RAM and 10,000 RPM drives.
It runs 2 10G instances and several Apex apps and it also runs Enterprise Manager Grid Control for 40+ databases. No issues.
Multiple prod/dev/test servers.
All are VIRTUAL running on VMWare ESX3.5. Each database VM has 2 gig of RAM and 2 "CPUs" running 11g/Apex3.2 on Oracle Linux. They all work fine.
I find that a poorly written app can crush just about any hardware you can throw at it. Luckily we don't have any of those ;).
I suspect that your hardware would be fine, particularly if running Linux. I cannot speak to Oracle/Apex on XP. I suspect you might be disappointed, mostly because it is tuned for interactive use rather than background applications (services). Not trying to be a Windows vs Linux troll here, just saying that if you are running a workstation with Oracle/Apex and you on it and expect to support 20-30 other people, you are all likely to be disappointed. Apex/Oracle should be on dedicated server hardware with a server OS.
You also aren't giving us much info on your hardware; 7200RPM IDE/SATA drives aren't going to be as fast as 15KRPM SCSI or SAS, etc.
It wouldn't surprise me if your well written application was able to support 20-30 users with the hardware you are describing (though I won't vouch for the OS).
Google for "apex.oracle.com" and "poweredge 1950" that will take you to this link:
http://joelkallman.blogspot.com/2009/06/who-says-application-express-cant-scale.html
The whole thing apparently serves up 6 million page hits a week with a 1.5Gig SGA. That's a lot of work on a pretty small box.

Is your iOS6 wifi ok? What router are you using?

After trying every possible solution proposed to resolve my wifi connection problems after upgrading to iOS6'the only solution left is to purchase another router. Today an Apple tech support rep told me wifi connection was hardware related only and had nothing to do with iOS6. I don't believe her but it is true that some are claiming they have no wifi connection problems at all after updating to iOS6.
If that is the case please tell me what brand and model router you are using so I can purchase a new one that is compatible with iOS6.
Thanks!

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

What CPU are you using on your board?

Similar Messages

Maybe you are looking for