What derives creation of PR and what for planned order???
experts i have a situation-pls help
I created a PM work order (IW31 ) with the
start date 01/31/2011
fin date 01/31/2011
then i offset it for -14 days (order start/ requirement date -> 01/17/2011)
i added 3 components in it with the following
RLT - 8 days
MRP type- PD
lot size- EX
after the MRP run- it created PR for all of them with creation date 12/17/2010 and release date 01/09/2011-> which is ok!
now the user added other component in the same WO with the same details on 12/22/2010-> but this time it created the planned order!!!!!
my quesiton is what is deriving it to create PR and what to create planned order???? (my requirement is to hav the planned order for the material so that i can convert the PO -> PR by nxt month close to the release date of the PR of the components- i _unnecessary dnt wants to have the PR created now!!!!!)_
Dear
A merial with Procurement Type F and having requirement (PIR , Sales Order ) , will generate PR in MRP run if you choose Create PR indicator as 1/2.But priorty should be Procurement Type in MPR2 view .Even you keep Creat Purchase Req indicator as 3 (Planned Order ) -It will generate Planned order and u can convert them to PR from MD04.
Where as a Material with Procurement Type-E will create Planned Order based on the requirement in MD02 .Here you should keep the Create PR indicator as 3.Even , if you choose Create PR indicator as 1 or 2 , you will recieve Planned Order Only which can be converted to Production Order , PR, Sub-Contracted PR etc .
Basically Procurement Type drives the Planned order and PR but Create PR indicator in MD02/MD03 gives th result based on the selection .
Test the same with a sample material with Procurement Type-E /F and play around with MD02/MD02
Regards
JH
Similar Messages
-
How to connect MAPL and PLPO to derive work center for planned order
Hi,
Anybody know how to derive work center using MAPL and PLPO for planned order (PLAF). Is there any connecting table between MAPL and PLPO.
Please help asap.
Regards,
MitaliI guess u r trying to view the detail scheduling info (tab in MD13) for a planned order . In that case -
1. Go to PLAF and enter the planned order number. (PLAF-PLNUM) and get the ID of the capacity requirements record (PLAF-BEDID).
2. With this PLAF-BEDID go to KBED. pass the value here. KBED-BEDID. The KBED-ARBID values are your work center ID.
3. To get the work center texts ( the way is appears in the screen) - Pass this value to CRHD . CRHD-OBJTY = 'A' ( i.e Type work center) and CRHD-OBJID = KBED-ARBID.
Hope it solves ur prob.
Cheers
SKC -
I have a 2 yr old Iphone 4 and have not backed up or connected to Itunes up for 1 yr. I have new Windows 7 computer and want to connect and copy Itunes backed up folder from external HD (a year ago) to new computer and install new Itunes and new IOS. What steps should I take and what precautions? I don't want to lose any data on my phone such as music, photos, contacts, notes, texts etc, nor lose music from prior backed up Itune folder. Apps should be OK from app store? Thanks for any help.
Hello CosK,
The following guide can step you through the process of using a backup of your iPhone 5 to transfer your content to your iPhone 5s.
Transfer content from an iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Should one or both of your phones fail to appear in iTunes, the following article provides troublesooting steps that can assist.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen -
What is ACCD DMG file and what is it for?
What is ACCD DMG file and what is it for?
See the last post in this thread: https://discussions.apple.com/thread/2084745?start=90&tstart=0
-
What are the defaul username and password for SQL Plus ?
hello, what are the defaul username and password for SQL Plus ? i'm using the client 11.2.0.1
You'll need to download the full database installation files for the platform you are using. They are two .zip files, about 2.2 gig total.
I'm not going to give you the link because you should be able to find it easily. You have to read and accept the license agreement anyway.
When you install it, you'll be given several options about the type of database you want.
But before you install anything, you should read the installation manual for your platform. -
What are the available software and apps for ipod nano
what are the available software and apps for ipod nano
saif78 wrote:
what are the available software and apps for ipod nano
Sorry, but Apps are not compatible with the iPod and there is no additional software available for it.
B-rock -
What is the default username and password for a Airport Time Capsule 3TB
What is the default username and password for a Airport Time Capsule 3TB
There is no default user name on any of the AirPort routers, but the default password is......
public -
What is the default username and password for SR520
What is the default username and password for SR520.
ThanksThe default username is admin. The default password is admin. Some good info on (lab 7A):
https://supportforums.cisco.com/docs/DOC-9646
Marcos Hernandez
Technical Marketing Engineer
Cisco Systems, Inc. -
What is the initial account and password for BW IDES 7?
Hi all:
what's the initial account and password for BW IDES 7?
Thank you very much!!sap* pass1234 or
ddic password was set in install. -
by asking for the function seek and replace [apple F] i get no display - so see nothing except the upper grey line. what is going on? and what can i do about it?
restarting doesn't workDoes trashing the preferences help? See Replace Your Preferences
-
HT5848 What is the sampling rate and codec for iTunes Radio. Is it lossless encoded?
What is the sample rate and codec for iTunes Radio? Is it lossless encoded?
I have to agree with you. There are several forum discussions on bit rate being as high as 256 kbps but I don't see how it could be more than 96 kbps based on the poor sound quality I'm hearing. I'm comparing it to an internet radio station that is 128 kbps and sounds much better.
Am I missing something? -
What's the best ink and paper for hp deskjet f4140 for best quality photo prints
what's the best ink and paper for hp deskjet f4140 for best quality photo prints
Hi,
For inks, no choice but for papers please use the following shop (or use information to buy elsewhere):
http://www.shopping.hp.com/en_US/home-office/-/products/-/-/CB587A?HP-Deskjet-F4140-All-in-One&Targe...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
What is a thunderbolt cable and what does it replace?
Read this link:
http://support.apple.com/kb/HT5219?viewlocale=en_US
Ciao. -
Quotation Creation and Billing for Service Orders--node details needed
Hi ,
I need to work on node "Quotation Creation and Billing for Service Orders" ....I see lot of integration with SD and FICO . Can any one give details about integrations required and what is done in this node ....
Regards
NPBThere are different steps to be done for that.
1. Create DIP Profile in ODP1 & check the consistency in ODP2 - DIP will be used to bill the customer based on resource (labor & material) usage. Creation of DIP profile has been discussed many times in this forum. Please check.
2. Assign the Quotation document type & Billing type used in DIP profile to your sales area - Your document type should be assigned to your sales organisation, distribution channel & division combination. -
How can we identify what are all user exits are there for sales orders,deli
Dear All,
How can we identify what are all user exits are there for sales orders,deliverys and invoices
thanks
nitchel vHi Nitchel
There are many ways to find out the user exits..
For example for VA01.
Goto Transaction ie VA01:
goto System-- Status
doubleclick on the program name ie SAPMV45A
SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
get the package name from here ie VA
note the package(VA) and get back to main screen
goto SMOD tcode and click on find button in the package spec giv the package name ie VA and execute it
you will find list of exits available
check out the exit that suits ur requirement
goto cmod and create a new project and implement in that user exit.
You will get the following exits in SMOD..
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly
V45L0001 SD component supplier processing (customer enhancements
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing
For Delivery you will get .. here the package name will be VL.
V02V0001 Sales area determination for stock transport order
V02V0002 User exit for storage location determination
V02V0003 User exit for gate + matl staging area determination (h
V02V0004 User Exit for Staging Area Determination (Item)
V50PSTAT Delivery: Item Status Calculation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50R0001 Collective processing for delivery creation
V50R0002 Collective processing for delivery creation
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50S0001 User Exits for Delivery Processing
V53C0001 Rough workload calculation in time per item
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53W0001 User exits for creating picking waves
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
For Billing VF01..Package is VF..
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
Or another way is ..
- Get the program name for that T-Code
- Go to that program
- In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
And also you can check in the tables in SE16 for user exits..
MODSAP - Stores SAP Enhancements
MODSAPT - Stores SAP Enhancements - Short Texts
MODACT - Stores Modifications
And there are other ways as well , pls check the forum for this ,
Regards,
Vvieks
Note : If you have any specific requirement then pls let us know , we will guide you
Maybe you are looking for
-
Hard Drive Advice Needed.. Much Appreciated
So I'm in the market for a new HDD for my Mid 2010 Macbook Pro 15". I'm currently looking for 1tb HDD, however I have come across 4 models of HDD's which seem to be the norm for 1TB HDD on the market today, and would like everybody's opinions on whic
-
5.0 free reader download
I need help. My computer crashed and I lost everything. I'm trying to re-download everything. I have a Compaq with Windows 98 2nd Edition. I THINK I had Adobe 5.0, but can't remember for sure. I installed it when my computer was new back in 2000 and
-
Hi! Would like to find out how a Pages document might be opened by a recipient that only has a PC with Windows and Microsoft Office. Is there a conversion program?
-
Okay, so I know that the hs.clear will set a value to zero, aka '0' in the database. So I have some code written in the rules file to do this. however, when I trace what's actually stored in the DB, it does not appear to actually delete the rows in t
-
Help: flash CS5 crashing and corrupted .fla's
I'm having one hell of a problem and could really use anyone's help who has a good idea. I am working in flash CS5 on windows 7 64. I am currently also running into the crash at save problem. The most recent version of my .fla corrupted about four d