What determines the links that show up on my .mac page?

Just learning iWeb 1.1.2. I created a site that included a welcome page, about me, three pages of photos, and a movie page. All this was using the templates Apple provided. I renamed the photo and movie pages. I expected the Welcome page for the site to be the only one to show up on my .mac homepage. Instead, under My Pages, the Welcome page is the only one that does not appear. (Isn't it supposed to be the equivalent of index.html?) If I go to one of the listed pages, I can then navigate to the Welcome page. But I think that is backward from how it is supposed to work. Also, another site I created showed up at first, then went off the list when I tried renaming the photo pages (removing colons from the names and adding underscores in place of spaces).

OOOOOK.
Duh, now I understand.
If it's any comfort my .mac page does not show all the pages either. Never really paid much attention to it. Really not sure what that's all about. Sounds like a .mac issue , but don't think I'd worry about it as long as the site works.
By the way, the site looks good.
You might think about a page that shows references your albums with links to the pages. You can elect to not have the album pages in the menu bar. Keeps the menu bar from getting too cluttered. Looks like you had that sort of idea on you "about me" page, but no links.
08 incorporates this concept.
anyway, good luck. Looks like your having fun with it.

Similar Messages

Bind two datagrid conrols. As in selection in dg1 determines the data that shows in dg2

I am working on a back office app for my company and I have been playing with WaveMaker and Flash Builder.
In WM I can have dg2 show data dependant on dg1 like I select a customer in dg1 the dg2 displays all devices that customer has registered to them.
http://184.73.199.26:8080/jim2 << This is my wavemaker version on amazon EC2 (no domain name) log in as limit pw:limit
the code that FB4.5 has auto generated is as follows
http://pastebin.com/bYbjA1zu
so that you are fair warned. I only installed FB4.5 like two days ago. I have very little experience with PHP/JS/AS. I am not asking for you to do it for me but some agnostic code would be great
Thanks all.

I got it. changed the service php file to this
$stmt = mysqli_prepare($this->connection, "SELECT * FROM $this->tablename where cust_id=?");
instead of
$stmt = mysqli_prepare($this->connection, "SELECT * FROM $this->tablename where dev_id=?");
Then in the selection change handler for dg1 added this line
getDeviceByIDResult.token = deviceService1.getDeviceByID(dataGrid.selectedItem.id);

What is the number that shows dialing *#06#?

So I found this site that claims that dialing *#06# shows the serial number of the phone. I tried this on my iPhone 4 and sure enough a 15-digit string came up with a green Dismiss button. I checked the iPhone's Settings > About, but it doesn't match any number listed. I'm just curious as to what this 15-digit number is, if anybody knows?

This link http://en.wikipedia.org/wiki/International_Mobile_Equipment_Identity should tell you all you need to know.
CM

I am trying to re-install Photoshop CS6. The files have downloaded but I get and error message that the Adobe Support Advisor is required to determine what the installation probIem is. I click on the link that says "get the Support Advisor here only to be

I am trying to re-install Photoshop CS6. The files have downloaded but I get and error message that the Adobe Support Advisor is required to determine what the installation probIem is. I click on the link that says "get the Support Advisor here only to be told the Support Advisor no longer exists!! A blind loop. I need to have Photoshop CS6 installed...what do I do from here??

The CC Cleaner Tool assumes the Akamai Download Manager is activated and it has not. It seems to be the missing file that triggers the error message. \in a previous re-install I was prompted to download & install the Akamai Download Manger, but not this time. Is there somewhere on the Adobe website that I can download it??

When I plug my phone on itunes, there's a "toolbar" at the bottom that shows me what is in my phone ie: music, picture, apps... what does "other" stand for ??

When I plug my phone on itunes, there's a "toolbar" at the bottom that shows me what is in my phone ie: music, picture, apps... what does "other" stand for ??

https://discussions.apple.com/message/20762105#20762105
and see to right "more like this "

Hi, i tried to update my iphone 5s and now the only that shows me in screen is to plugged in with itunes. I am opening itunes but it does not installed with it or regognized it ... what i must to do ?

hi, i tried to update my iphone 5s and now the only that shows me in screen is to plugged in with itunes. I am opening itunes but it does not installed with it or regognized it ... what i must to do ?

Read this
http://support.apple.com/kb/HT1808?viewlocale=en_US

What is the name of the tooltips that shows up when you hover over a UIbutton?, such as "back", "foreward", "home" etc

Okey so basically I've themes my windows 7 into a black state.
The thing about that is that the default font color firefox uses for tooltips and other information is back so its quite impossible for me to read.
After a while googleing I found out that something called userChrome.css can be used so naturally I looked furhter.
I found answers for almost everything I was looking for, except these "button tooltips".
Heres my userChrome.css code:
menubar, menu {
color: black !important;
menupopup > menu,
menupopup > menuitem,
popup > menu,
popup > menuitem {
color: white !important;
tooltip, statusbar {
color: white !important;
Basically it takes care of all text that was black and turns it the way I like it.
So what is the name of the tooltips that shows up when you hover over a UIbutton? such as "back"
With the correct name I should be able to add
name {
color: white !important
and it should work just fine :)

hey 88_King,
go to http://support.lenovo.com and download any one or all the software you require from here.
and most of the items you need is under ThinkVantage
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Can we hide or delete the standard BO link that shows up in SAP Inbox & UWL

Hi,
Is there a way to hide or delete the standard BO link that shows up in SAP Inbox & UWL ?
I have already gone through the following threads.
Objects and attachments in workitems..
No standard object's link in the workitem
But, i have this requirement to hide atleast on UWL side the link for the std. BO.
I am working with ECC 6.0 & E.P 7.0 , SP 10.
Jocelyn,
You were mentioning about some UWL XML configuration to hide this in the first thread. Can you elaborate on this please.
Anybody,
Any idea on how to achieve this ?
I really appreciate your immediate reply.
Regards,
venu

Guys,
Luckily, for this, i was using a user-decision step which uses DECISION --> PROCESS method. So, I could remove the BO:TRIP that i included earlier. But, for other tasks, where if we use a method from our BO, we cannot remove this std. BO link that shows up in "Objects & Attachments"...to my understanding.
Thanks for all your info on this question.
venu

The song that shows playing my ipod is not what is selected. Restore ipod or is it itunes?

How do I restore my ipod. The song that shows is playing is not playing. Or is that iTunes?

Hey slelli,
Thanks for the question. If I understand correctly, you want to restore the iPod. I would recommend that you read this article, it may be able to help the issue.
Use iTunes to restore your iPhone, iPad, or iPod to factory settings - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario

What r the steps that involve while v r using DBCONNECT AND UDCONNEC

Hi All,
What r the steps that involve while v r using DBCONNECT AND UDCONNECT AND IN WHICH DIFFERENT SCENARIOS V USE THEM.
REGARDS
KK

Hi,
To Configure UD Connect on the J2EE Server for JDBC Access to External Databases;
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff
To create Driver on JDBC side
http://help.sap.com/saphelp_nw70/helpdata/en/b0/6e62f30cbe9e44977c78dbdc7a6b27/frameset.htm
Configuring the BI Java Connectors
http://help.sap.com/saphelp_nw70/helpdata/en/43/e35b3315bb2d57e10000000a422035/frameset.htm
Then to extract data use this...
Before you can transfer data from UD Connect sources into BI, you have to generate the metadata (the information about the source object and source object elements) in BI, in the form of a DataSource with a function module for extraction.
If your dataflow is modeled with objects based on the old concept (InfoSource 3.x, transfer rules 3.x, update rules 3.x), you can generate a DataSource 3.x for transferring data into BI from a database source system.
Prerequisites
You have modeled the InfoObjects that you want to use in the InfoSource and the data target or InfoProvider according to the UD Connect source object elements.
Note the following background information:
Using InfoObjects with UD Connect
Data Types and Their Conversion
Using the SAP Namespace for Generated Objects
Procedure
You are in the Modeling InfoSource tree of the Administrator Workbench. First create in InfoSource and activate the communication structure. Then generate the generic DataSource using the wizard in the InfoSource maintenance.
1. Choose InfoSources ® Your Application Component ® Context Menu (right mouse click) ® Create InfoSource.
2. Select the type of the InfoSource.
3. Under InfoSource, enter the technical name of the InfoSource, and assign a description and choose Continue.
The system creates an InfoSource and shows it in the InfoSource tree under your application components.
4. In the context menu of the InfoSource, choose Change .
The communication structure maintenance screen appears.
5. Using the previously modeled InfoObjects, create the communication structure (see Communication Structure).
6. Save and activate your communication structure
7. In the dialog box that follows you will be asked whether you wish to activate the dependent transfer program. Choose No.
8. In the InfoSource menu, choose Extras ® Create BW DataSource with UD Connect.
You get to the dialog box where you can assign a UD Connect source object to a DataSource and then generate the DataSource with the extractor. The fields for the DataSource are already being displayed in the table on the left side of the screen. The fields have the same name as the InfoObjects that you have used in the InfoSource.
9. Select the RFC Destination for the J2EE Engine.
Make sure that the local server is running. If the local server is running and you cannot open the table for RFC destinations, start the local server again.
10. Choose the UD Connect Source in which the data that you wish to access is located.
All available sources that are connected to the J2EE Engine are provided for selection in the input help. n instances are available per adapter.
11. Select the UD Connect Source Object.
All available source objects that are available in the selected UD Connect source are provided for selection in the input help. Source objects can be multi-dimensional storage or relational objects.
The system generates the name of the DataSource in the namespace 6B.
The DataSource is then replicated in BI.
The myself system is assigned to the InfoSource as source system as well as the DataSource.
The system generates a proposal for the transfer rules.
Since the DDIC structure and the function module are located in the SAP namespace, the following entries can be requested during generation:
Developer and object key or
Developer key or
Object key and
Transport request
If you do not make the requested entries, the generated infrastructure is not usable.
14. Change or complete the transfer rules as needed. For example, if a source object element is not assigned to a unit InfoObject, you can determine a constant for the unit, such as EUR for 0LOC_CURRCY (local currency).
15. Save and activate your transfer rules.
Recognizing Manual Entries
You can enter and change the RFC Destination, UD Connect Source and UD Connect Source Object manually. In order to validate these entries and the ones that depend on them, choose Recognize Manual Entries. For example, if you change the selected RFC destination, all of the field contents (US Connect Source, UD Connect Source Object, list of the source object elements) are invalid. If you choose Recognize Manual Entries, the dependent field contents are initialized and have to be maintained again.
Result
You have created the InfoSource and DataSource for data transfer with UD Connect. In the DataSource overview for the myself system, you can display the DataSource under the application components Non-Assigned Nodes.
When modeling InfoObjects in BI, note that the InfoObjects have to correspond to the source object elements with regard to the type description and length description. For more information about data type compatibility, see Data Types and Their Conversion.
The following restrictions apply when using InfoObjects:
Alpha conversion is not supported
The use of conversion routines is not supported
Upper and lower case must be enabled
These InfoObject settings are checked when they are generated.
Based on the large number of possible UD Connect sources, the most diverse data types are possible in the output system. For this reason, a compatibility check is made at the time of generation of the UD Connect DataSource that is based on the type information supplied by the source systems. This attempts to decrease the probability of errors during the extraction process.
(Refernce:SAP Notes)
Hope this helps,
regards
CSM Reddy

What are the objects that support variables?

What are the objects that support variables?

Using Variables: The Variable Wizard and the Variable Editor
Definition
Variables are parameters of a query that you defined in the Query Designer and that are filled with values when you execute the query or Web application. They serve as a store for characteristic values, hierarchies, hierarchy nodes, texts and formula elements, and can be processed in different ways.
The processing type determines how a variable is filled with a value for the runtime of the query or Web application.
There are different types of variables depending on the object for which you want to define variables. These types specify where you can use the variables.
Variables are reusable objects. This means that when you define a variable for a query in the Query Designer, this variable can be used in all other queries. Variables are not dependent on the InfoProvider, only on the InfoObject. A variable that you define for an InfoObject is available in all InfoProviders that use this InfoObject.
Use
Variables enable you to customize queries flexibly (parameterize the query) possible. If you use variables in the Query Designer, do not select any fixed characteristic values, hierarchies, hierarchy nodes, texts, or formula elements. Instead, set up variables as place holders. These are then filled with values when the query is running (when you insert the query into a workbook, when you refresh the workbook or when you execute the query on the Web. You can use one query definition as the foundation for many different queries if you use variables.
You want to create one query for all the people responsible for customer groups, who each only evaluate the data for one customer group. In the Query Designer, you insert a variable for the characteristic u2018customer groupu2019. Just before the query is executed, decide for which customer group(s) you want the query to apply to.
There are two tools in the Query Designer for designing and changing variables.
The variable wizard takes you step-by-step through the process of defining a variable. Each individual step is context-sensitive and is adjusted according to the combination of variable and processing types used. This means that the variable wizard only offers the selection options that are permitted for that combination of variable and processing types. For more information, see Defining Variables with the Variable Wizard.
The variable editor dialog box offers all of the selection options for changing an existing variable. The individual fields in the dialog box show the settings affected in the variable. You can change these settings here. If you want to make the changes using a step-by-step process with explanatory texts, you can jump to the variable wizard using . For more information, see Changing Variables in the Variable Editor.
Integration
The variable wizard and the variable editor are functions in the Query Designer and are context-sensitive.
In principle, the two dialog boxes appear wherever you can enter constants (that is, values) in input fields. One of these input fields is the Entry of Variables checkbox. If you select this option, the following options for using a variable appear, instead of a fixed value:
·        The variables that are available appear in the dropdown box for the input field. You can select a variable from the dropdown box.
·        The symbol Change Variable appears next to the Entry of Variables checkbox. You can change the variable using . The Variable Editor dialog box appears.
·        The symbol New Variable appears next to the Entry of Variables checkbox. Choose if you want to create a new variable. The Variable Wizard dialog box appears.
By way of an example, when defining conditions for the value limit of the condition, you can not only enter fixed values but also formula variables. Mark the Entry of Variables checkbox and you can then use the options described above. The settings are context-sensitive so that the formula variables that only those formula variables that are available appear in the dropdown box. The variable wizard is set up automatically in the same way for entering formula variables.
You can also get to the variable wizard and the variable editor from the context menu of those objects for whose values you can define variable placeholders. From the context menu, choose New Variable. The SAP BW Variables Wizard appears. In the context menu for variables that have already been defined, you can choose Edit. The SAP BW Variables Editor appears.
In the InfoProvider objects dialog box, you select a characteristic (for example, Order) and from the context menu, choose New Variable. You reach the variable wizard, which is already set up for you to enter a characteristic value variable.
In the InfoProvider objects dialog box, you select a characteristic value variable and from the context menu, choose Edit. You reach the variable editor where you see all of the settings for the variable. You can make changes to the variables here.
Variable Types
Definition
The type of variable being used. This determines the object that the variable represents as a placeholder for a concrete value.
Structure
There are different types of variables depending on the object for which you want to define variables. These types specify where you can use the variables.
·        Characteristic Value Variables
Characteristic value variables represent characteristic values and can be used wherever characteristic values are used.
If you restrict characteristics to specific characteristic values, you can also use characteristic value variables. See, Restricting Characteristics.
·        Hierarchy Variables
Hierarchy variables represent hierarchies and can be used wherever hierarchies can be selected.
If you restrict characteristics to specific hierarchies or select presentation hierarchies, you can also use hierarchy variables. See Selecting Hierarchies
·        Hierarchy Node Variables
Hierarchy node variables represent a node in a hierarchy and can be used wherever hierarchy nodes are used.
If you restrict characteristics to specific hierarchy nodes, you can also use hierarchy node variables. See Restricting Characteristics: Hierarchies
·        Text Variables
Text variables represent a text and can be used in descriptions of queries, calculated key figures and structural components.
You can use text variables in the description of calculated key figures, restricted key figures, selections and formulas when you create them. See Defining Calculated Key Figures, Defining Restricted Key Figures, Defining Selections, and Defining Formulas.
You can change the descriptions in the properties dialog box. See Query Properties Calculated Key Figure Properties Restricted Key Figure Properties, and Selection/Formula Properties.
·        Formula Variables
Formula variables represent numerical values and can be used in formulas. See Defining Formulas.
In addition, numerical values are used for selecting exceptions and conditions and you can also use formula variables here. See Defining Exceptions and Defining Conditions
You can use a formula variable for the interest rate in order to process the current interest rate, after you have executed the query or Web application.
http://help.sap.com/saphelpnw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm_

Latests ongoing 'upgrades' as they refer them IOS7, without announcement removed the feature that showed an assignged contact image appearing full screen when that contact called. Why ? brilliant feature Fast losing faith, thoroughly ****** off, moving on

Latests ongoing 'upgrades' as they refer them IOS7, without announcement removed the feature that showed an assignged contact image appearing full screen when that contact called. Why ? brilliant feature Fast losing faith, thoroughly ****** off, moving on to another phone.

We are all users here. You are not talking to apple on these forums. There is no way anyone here can know the decision making process apple uses to determine what changes to make to the operating system. Also none of use care about which phone you might buy next.

What is the link between schedule lines and delivery document item level

Can any one please explain me what is the link between the schedule lines of the order/scheduling agreement and the item level of the delivery.
Is there any link between VBEP and LIPS ?

Hi
Most of the item level data in delivery doc is copied from Schedlue lines in Sales order for eg delivery date
So u may say that schedule line in sales order becomes the line item in Subsequent doc that is in Delivery doc .
The table u are talking about i.e VBEP is related to sales doc and it contain data for Schedule line in sales order and the other table i.e LIPS give the delivry doc related data at item level.
Hope this help

What is the link between PO and Requisition in database side

hello friends,
please can any one tell me that what is the link between PO and Requisition in database side. means after creating the requisition we will go for create the PO based on that requisition.
want to know that what is the link between both in database side.
Thanks in advance
krish.

Hi,
The link is at distribution level, between:
PO_DISTRIBUTIONS_ALL.REQ_DISTRIBUTION_ID
and
PO_REQ_DISTRIBUTIONS_ALL.DISTRIBUTION_ID
Hope it helps.

Question about the links that include parameters...

Hello,
I use this:
<a href="inserer_devis.jsp?firstparameter=<%= rs.getString(1)%>&secondparameter=<%= rs.getString(2)%>">to have a link that gives parameters to the other JSP.
My question is:
On the other JSP, when I use request.getParameter("firstparameter"), what is the thing that I get: is it a string, a char, ...??
And how can I convert it to a float or an int?
I have problems with integer.parseint() and float.parsefloat(), it tells me "NumberFormatException: null". The compiler thinks that my parameter is not a good int (or float).
Thank you.
Romain.</a>

Request.getParameter always returns a String (see the javadocs).
To convert a String to an int use Integer.parseInt(StringToParse);
To convert a String to a Float usse Float.parseFloat(StringToParse);
just see the javadocs for more information

What determines the links that show up on my .mac page?

Similar Messages

Maybe you are looking for