What Device type should be selected

Respected Guru's, please help me in finding out the suitable Device type for
printer model : WeP HQ 1070+DX. And EPSON EX-1000
Thank in advance.
Daya

HI
for printer EX-1000 Dot matrix you can use EPESCP9 drivers
Note 153879 - EPSON printer model and SAP device types
i am not able to find WeP HQ 1070+DX printer in the list of sap supported printers.
please check out with manufacturer
Note 1097990 - List of Printer Vendor Wizard
Note 8928 - List of supported printers/device types
Regards
dEE

Similar Messages

What device i should buy

hello guys
(sorry for mi grammar)
i have a little problem,what device i should buy for this type of application
a simple midlet program that send information to a router wireless (wi-fi)
some guys said me buy a pc pocket or palm with wireless card incorporated
the point is, i need your opinion coz, your knowledge is more important and real that google, is marketing of prices and products
thanks in advanced

As for me, you should use ASUS or NETGEAR cards.
I have no problems with them.
If there any problems with drivers installation you can use NDISWRAPER
But don't use D-LINK 'cause original schematic of impulse power suply is "unstable" and it can burn out
your card or AP. This caused by using btm-like components which are unstable on higher frequencies. (higher than 2 ghz and we have 2.4 ghz) And TP-link cards is "Chinese modified" D_LINK and it is more stable.
I think that the best way to power up your linux with wireless device is to use Atheros or Prism chipsets.
If you want "much powerfull" connection you should use Orinoco Gold card. This thing will blow up all the chanells.
There are nice Planet cards and AP's supported by wireless-ng. Why Planet?
Planet ARM's (CPU's) on AP's are about 166-233 mhz, but there are a lot of stuff on them.
And they've got much power - about 850 mW
As for me, if you don't whant to play with drivers you should use AP's.
Greatest AP that I've ever seen is Senao Deluxe. This series of AP's is about 1W of power!!! But there are some problems with their inner stuff.

SPAD: Device type to be selected for 'HP Laser Jet P2055dn'

Hi,
Recently we were asked to configure 'HP Laser Jet P2055dn' as the cheque printer in our landscpe.
While configuring the printer, I have a doubt of the Device Type to be selected in SPAD settings.
Could you please suggest me which Device Type to be selected for this printer
Below are the details of the Printer provided o me by the infrastructure team:
HP Universal Printing PCL 5: 'HP Laser Jet P2055dn' with a Troy badge on it
Regards,
Manish Sharma

Hello,
Try using HP Laserjet 4 series PCL-5 driver for the printer you have mentioned.
Otherwise you can customize your own drivers with needed controls, formats, etc macthing the cheque printing.
Regards,
Yoganand.V

What device type need to be used for HP Laserjet 1020 printer in ECC 6.0 ??

Dear Experts,
In out system we already configured on output device details as follows
Output Device Name         : FEPRINTER01
Device Type   : HPLJ4 - HP Laserjet 4 Series PCL -5
Device Class : Standard Printer
Host Spool Access Method :   G: Front end print with control technologe
Host Printer : __default
For one of end user computer is connected with HP Laserjet 1020 model type printer.
When this user is giving print out on to device FEPRINTER01
The spoll request is reaching OS spooler , when i open OS spooler folder - i can see request.
it waits for a while - the queue vanish , printer do some noise - but no print out comes from the printer.
Please do let me know what type of device i have to use for this model in this situation
Thanks in Advance
Regards

Hi SRINIVAS
I am using this configuration:
Device Type: SAPWIN :Rel.4.x/SAPIpd 4.09+ ONLY!
Device Class: Standard Printer
Access Method: F: Printing on Front End Computer
Host Printer: __DEFAULT
Please reward points if helpful
Regards
Edited by: Eydar Del Angel on Feb 6, 2008 12:49 PM

What port type should i use?

I am using Seebeyond as middleware and it sending Vehicle IDoc VEHCLE01 to SAP System.
Please help me
what should port type I need to use? Should it be file port or t-rfc port?
What should partner type need to use? Can it be LS type?
Is it ALE or EDI Scenario?
Thanks in advance.

Hi,
Yes, the Port can be a File Port (IDocs will be saved in this folder) or t-rfc port. File port should be OK.
Partner Type can be LS.
Cheers,
Bhanu

I have a HP5500 60" - what paper type do i select for tracing paper?

HP5500 60" printer - i need to print architectural sketches on to tracing paper, but tracing paper isn't an option for paper type when loading it. What is the best 'paper type' to select for this medium? Have printed on tracing paper before and the image bled on the paper (didn't stay sharp)

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

What "Partitions" type should I use when I create an image in Disk Utility?

I have a Sony HDR-SR1 camcorder and have been creating images in Disk Utility to dump copies of my camcorders hard drive to. That way I can mount the disk image and import into iMovie just as if the camera was plugged in. These are the options I've been using:
Volume Size: varies
Volume Format: Mac OS Extended (Journaled)
Encryption: none
Partitions: Single partition - Apple Partition Map (the default I believe)
Image Format: read/write disk image
The option I'm not sure of and can't find much information on is Partitions. Up until now all the ones I've created use what I listed above. What is the difference between all the options (hard disk, cd/dvd, no partition, single partition - *multiple options*) and what should I be using to ensure long term compatibility with these disk images. Thanks.

You don't need the journaling feature. Everything else appears proper. As for the various formats, check DU's help files.

What video settings should I select for 60m of video in iMovie

My gear: HDTV, DVD player that upconverts to 1080i, Canon HG10 HD camcorder
I record in HD. I have both an HDTV and a 4:3 standard TV. I don't have a Bluray player, nor do I want to invest in one at the moment.
I only need to record 60 minutes of video at a time to a single DVD.
Question: what settings in iMovie should I use to ensure the BEST video quality when I play back on my HDTV and DVD player that upconverts?

If you shoot 30p, ingesting 960x540 should be enough for your DVD output. If you use 60i, then importing and outputting at 1080i would be important to maintain 60Hz motion smoothness. (You shouldn't use stabilization or cropping while editing to avoid damaging 60i.) Then use MPEG streamclip or JES deinterlacer to resize 1080i 60 to 480i 60 to feed DVD authoring tool.
Or, you may want to use iMovie09 only as an importing tool for AVCHD video. Use imported movie (1080i AIC) in iMovieHD to edit movie and send it to iDVD, which will preserve 60i motion.

What file type should i use for reading a large file of data?

I want to store data in a file and access them later. The data file could reach 500 to 1000 MBytes, as a binary file.
I may have memory problems.
I do not need the whole data in memory, only a few data each time, for my calculations.
If i use a binary file, i can not read only a few data. I have to load the whole file and then read the data i need.
Is this correct?
If i use another type of file, can i read only a few bytes without loading the whole file?
Maybe a TDMS file?
Solved!
Go to Solution.

I would probably use a TDMS file for this since it could also be read into excel if it were small enough - just more flexiblility. But you can also do it using binary types. You don't have to read the entire file when using binary files. See below.

Trying to set Harmony 900 remote with Apple TV - Which device type to I select?

When trying to add a device within the Harmony software on my iMac, which device tpe to I choose for the Apple TV?

I found the answer here: http://apple.stackexchange.com/questions/68301/how-do-i-set-my-logitech-harmony- remote-to-control-my-apple-tv
briefly it is: Computer-> Media Center PC -> Apple -> Apple TV

What report type should use ?

Hi all,
I got the following query output :-
Item___Type
1233___011
1233___013
1233___015
1233___014
and I will like to display the output in the following format :-
Item__Model_011___Model_013___Model_014___Model_015
1233__011_________013_________014_________015
How should I do ? Thanks in advance.
rgds
Lim

Hi Lim,
U can use the matrix report.
It will solve yr purpose.
Regards
Mayank Sharm

What file types should I import?

Hey Everyone.
I've been using the same process for years to create my videos and burn them to DVD.
I capture and edit with FCPro and Motion.
I export out of FCPro with the
File>export>Export using compressor from the final cut menu.
This opens up compressor.
I always set the compressor settings to DVD Best Quality 90 minutes.
Then I import those MPEG2 files into DVDSP and continue the process from there.
It dawned on me today that I may not be doing this in the correct way. I started thinking... an MPEG 2 file is a compressed file. Then I import that file in DVDSP... does it compress it again. Doesn't it recompress it into a VOB file... so in essence I'm compressing it twice.
Can someone clarify this for me.... Thanks in advance.
-Fraky

It dawned on me today that I may not be doing this in the correct way. I started thinking... an MPEG 2 file is a compressed file. Then I import that file in DVDSP... does it compress it again. Doesn't it recompress it into a VOB file... so in essence I'm compressing it twice.
Some things will be recompressed, mainly on menus if you make them a certain way,, but otherwise DVD SP will not recompress m2vs that are on tracks or otherwise...in other words encoding assets outside DVD SP with Compressor for m2v and AC3/Dolby is the way to go.
The VOBS are not recompressed, they are muxed.
In other words it sounds like you are generally doing things fine

Mapping an iPod; selecting a device type / Norton Antirus quection

I am a new user to Network Magic. I had not heard of the program until yesterday.
So far all the PC's have connected and confugured OK. I have two issues / questions:
1) For the iPod, naming it is no problem but what Device Type should I select?
2) On one Dell PC, connected by wire to the router, Network Majic is not seeing the Norton Antivirus software and reports "Antivirus is not active", but it is. Any idea on how to fix this? Right now I have it set to ignore.
Wogie
1) Network Magic Version installed: 5.5.9195.0-Pure0
2) Cable connection, Time Warner Road Runner
3) Brand of Modem:
4) Router: Linksys WRT54G; Firmware v1.02.0, Jan. 16, 2007
5) 2 computers wired, 1 laptop (wireless) and 1 iPod
6) Problem computer: iPod
7) All PC's use Windows XP Service Pack 3 (Pro on 1, Home on 2)
8) Norton Antivirus
9) Norton is active

Has someone an idea how to get into the system of the iPod, that i am able to see what he is doing?
I already tried to works with XCode, but not able to connect to my device.
Also worked with the iPhone Utility, nevertheless a bit helpful.
Or a hint, how to destroy my actual firmware and to set up a new one, means setting up a completely (brand) new iPod like i bought it at the store?!
Support can not help me any more because my warranty is over ince 2 days.
Thank you

Device Type for EPSON TM-U220

Hi All,
We are using EPSON TM-U220 dot matrix printer. Can anybody tell me which device type should be used for this? How to find a appropriate device type for a printer? Where we can get this info? I have selected EPESCP and its not printing the way how its appearing in the preview. I tested with SAPWIN too, same problem I have faced with SAPWIN too.
Thanks in advance.
Hernando

is correct, the printer is set up in the Tx SPAD, we tested several device types, but none has proved effective, as reported, the preview is fine but when printing it is so wrong. My question is, If you have used this type of printer, if so what kind of device type are you used?
Thanks
Edited by: Hernando Enrique Polania Cadena on Dec 30, 2008 10:00 PM

Device type for IBM Proprinter XL III

Hi
Can anybody tell me what is device type to be selected for the PRinter IBM Proprinter XL III
Right now when i am printing it comes some garbage and some proper characters.
Thanks in advance

Is it a Line Printer?
I found this link a long time ago... it might point you in the right direction,
https://unebapps01.nebraska.edu/slugo/pubkb.nsf/50b3ab1ea706e0f886256798005a7505/f321eec40338798986256e6f006edada?OpenDocument&ExpandSection=1
Regards
Juan

What Device type should be selected

Similar Messages

Maybe you are looking for