What DIAdem version installs NI License Server 3.5 or higher?

Hi Larry_Nguyen,
Do you mean NI License Manager? Why do you ask? If you need NI License Manager, you can download NI License Manager 3.7 for free here.
Jeff Munn
Applications Engineer
National Instruments

Similar Messages

Can I use DIAdem 10 and older license server?

1
1We have currently activated our DIAdem 10.0 multiseat license on previous version of NI LVM. The DIAdem 10.0 loading will be interrupted as the message "Fehler beim Aufruf des Lizenzmanagers: Es wurde keine gültige Lizenz gefunden. DIAdem wird beendet".
Is a combination of DIAdem 10.0 software and previous version of NI LVM not possible?
Thank you in advance.

Hallo Christian,
thanks for your advice. I have to use the older VLM version, because we have more than 100 clients registered there and we don't want to re-enter the client information by hand again.
I'm contacting NI technical support now.
Regards,
-Yoppi Effendie-
1

License server in data transfer workbench

Dear All Experts/Gurus,
I have a problem about log on to data transfer workbench (DTW). I don't understand why I must put numbers in license server field before log on to Data transfer workbench ? In the license server field of license administration form, I've seen the license server is words for example jimmymc, then beside it 40000.
I log on DTW, I fill jimmymc in the license server field but I've got error message:
"connection to jimmymc has failed. Error code 100000001. Connection with license server failed"
I don't understand why it succeeds if I fill numbers for example 130.1.2.5:40000, it works successful. What actually the function of license server field ? why could it be different with license server in the license administration form ?
I apreciate your answer. TIA
Rgds,

Jimmy,
The net-net is that ... the way you log into the DTW as of the 2005A version is different becasue the overall licensing mechanism used by SAP Business One for 2005 changed from what was used in version 2004. The licensing mechanism now uses CORBA. This allows connection without having to have an IP Address, but you can still use one as you have seen. When you install the License Server for Business One, the default connection "port" used and is defaulted to in the License Server is 30000 ... although you can change this to any port not being used. Again ... the net-net is that is how it works and that is what is now required for connection or use the IP.
HTH,
Eddy

Recd following error when attempt to open ebook using ADE 4.0 : "Unable to Download. Error getting License. License Server Communication Problem: E_LIC_LICENSE_SIGN_ERROR" iMac 10.8.5 Chrome Version 37.0.2062.124

recd following error when attempt to open ebook using ADE 4.0 : "Unable to Download. Error getting License. License Server Communication Problem: E_LIC_LICENSE_SIGN_ERROR" iMac 10.8.5 Chrome Version 37.0.2062.124
chat with customer service at book company i purchased file:
"Me: I installed the proper adobe software, adobe digital editions 3.0 (now have updated to 4.0) on my mac running os 10.85 however I am getting the following error code when i try to open the file:
"Error getting License. License Server Communication Problem:
E_LIC_LICENSE_SIGN_ERROR"
Charles P.: Okay, what you need to do unfortunately, is contact Adobe at http://www.adobe.com and they will need to get your license issue resolved.
Charles P.: Is there anything else I can assist you with today?
Me: title of error is Unable to Download
Me: i dont see how that would be an adobe problem?
Charles P.: I understand, but it appears that the reason for the download issue is because of the license error the license is related to the Adobe Digital editions software. I understand how this could be confusing but it's due to the authorization of the ADE software. Adobe would need to correct your account issue with the license
Me: ok but i thought this was a free license from adobe??!! this is just a digital editions reader, right??
Charles P.: That is correct it is a free license but your account has to be associated with one license and yes the Digital edition is a ebook reader that our ebooks use for you to view

Well, just for the halibut I tried opening the book again today and , GLORY BE!, it worked.
Guess it may have taken overnight for Adobe to OK my license to their free ADE software. Also works now using Bluefire app as the reader on my android phone, although it was a pain
to get the book file in the right file folder for bluefire to see it.
I hope that time also heels the issue with all other Error Getting License users.
panman

What is the build version for Sharepoint 2013 Server including trial version there is one?

Hello Community
    When using WS2012 and Sharepoint 2013 Server, what
build version for a Sharepoint 2013 Server farm should
be applied and where do you get the cumulative update
for it (trial version also if there is one)?
    Thank you
    Shabeaut

Hi,
According to your description, my understanding is that you want to know which SharePoint build version should be applied to Windows Server 2012 and where to get cumulative update.
If you want to use SharePoint in Windows Server 2012, you can use the RTM version 15.0.4420.1017.
For CU update and build version, I suggest you can refer the detailed article below:
SharePoint 2013 Build Numbers
Thanks
Best Regards
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

What version of Adobe Media Server would fit our needs?

Hello. We are considering doing HTTP video streaming on our intranet. We have approximately 500 employees and would want to be able to stream approximately 10 - 50 one-way connections at one time. What version of Adobe Media Server would you recommend to support this?
After reading more about streaming, we would probably want to support the progressive download method.

But it can't create PDF files...

I am getting an error message "Adobe_unable to download, license server communications problem, e_act_not_ready". I have downloaded Adobe Digital Editions and have authenticated the computer, but cannot download a book from the library. What should I do

I am getting an error message "Adobe_unable to download, license server communications problem, e_act_not_ready". I have downloaded Adobe Digital Editions and have authenticated the computer, but cannot download a book from the library. What should I do?

Having exact same problem, only it's with a book I've paid for, so it hurts more . Any ideas?

How to find what version of Iplanet Web Server is running on System

Hi,
I am trying to find a command which i can run to find out what version of Iplanet Web Server am i running on my Solaris System.
Example: if i ran command it should return something like: Iplanet Enterprise Web Server 4.1 SP8
WIll appreciate any feedback
Thanks

You can go to server_root/bin/https/bin and run "./ns-httpd -v" command:
# ./ns-httpd -v
Sun Netscape Alliance
iPlanet-WebServer-Enterprise/4.1SP8
For the current 6.x versions, you can use the start script of the instance like follows:
# ./start -version
Sun Microsystems, Inc.
Sun ONE Web Server 6.1SP1 B12/19/2003 22:19
Please note that 4.1 version is no longer supported. You
should plan to upgrade to a supported version like 6.1.
Thanks
Manish

Hi can someone explain what the following error code mean and how i can recifty to download a copy of ebook purchase Error getting License. License Server Communication Problem: E_ACT_NOT_READY

Hi can any one help
I keep getting the following error code when I try and down a ebook which I have purchase
Error getting License. License Server Communication Problem:
E_ACT_NOT_READY
can someone advise me what this means and how I recifty the problem to enable me to read the ebook purchase?
Thanks

I am having this exact issue. I just downloaded a book and went to open it and got this exact problem.
I purchased he book through indigo/kobo edition and paid for it and immediately went to open it and am getting the same error
Error getting License. License Server Communication Problem only mine says Bad Device key after.
Not sure why someone has not answered this question yet...i am using windows 7 and this is how i always do it. Never had this problem before when purchasing a book.
i hope someone answers this soon.

What is, "Portrait Displays" displayed: "version changed bad license file".

Monitor: w2207h. Nvidia GeForce 8300GS 128MB graphics card. a6437c #KJ400AA-ABA. Vista Home Prem 64 bit. [email protected] 4GB memory. New July 4, 2008. Sam's Club.
Uninstalled "My Display" (display driver), per advice this forum in '08 or '09.
Guessing this driver enables landscape/portrait display swith when monitor rotated. Don't know what else.
Thanks in advance
Dean2011
[email protected]

Hi,
Go to NVIDIA and download and install the latest NVIDIA video driver.
Go into the Control Panel ---> NVIDIA Control Panel and locate the rotate display function.
If the above solves your issue except for the message issue then I would delete out the Pivot software.
The "version changed bad license file" message sounds like this issue.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

What are the differences between a trial version and a licensed copy of RoboHelp?

What are the differences between a trial version and a licensed copy of RoboHelp? How is original Robohelp software useful compared to the evaluation version (freely downloaded software)
Thanks.

Welcome to the forum.
The only difference should be that the trial is limited to 30 days use. All functionality works and nothing is watermarked Trial or suchlike.
The trial of the standalone version allows you to link to FrameMaker documents. It should not and that feature will be disabled if you proceed with the full version. Other than the time limitation, that is the only difference.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

What JVM versions is Commerce Server Certified On?

What JVM versions is Commerce Server Certified On?
And where did the 'Supported Platforms' page go?
mike

I found what I needed in the release notes.
- mike
"[email protected]" <[email protected]> wrote:
>
What JVM versions is Commerce Server Certified On?
And where did the 'Supported Platforms' page go?
mike

IRM license server installation : ERROR

Hi ,
. i have installed oracle DB 10.1.2 . and now when am trying to install IRM license server 10gR3 PR2 on win 2003 server and after giving the credentials ( DB uname , pwd ) to connect to the DB , followinbg Error is thrown.
Error reported by the ODBC Driver is 'The Database reported the error '[Microsoft][ODBC Driver Manager]Driver's SQLAllocHandle on SQL_HANDLE_ENV failed'' .
could anyone help on this please

I am new to this program. I also downloaded two books from the library but get the same error message. I'm looking for a solution on the net but couldn't find for about a week. If someone have a solution please share it's urgent.

Associating policy files with license server

[ Problem ]
I’m going through the sample and documentation for FA 2.0. It mentions that whenever a policy is created/updated that the license server has to be informed. In the reference implementation, there are the model usage policy samples that I see being loaded. In the non-refimpl of flash access, how does the license server load/know about the policies available? I looked at the sample flashaccess-tenant.xml, I didn’t see any section where policy files are configured. Would it have to be done outside of the app?
[ Solution ]
If you update a policy after it was used to package content, and you want the new policy to be used when the user requests a license for that content, the license server needs access to the latest version of the policy.
In the Reference Implementation, there are two modes demonstrating possible business logic implementations (but of course, you may choose a different approach in your implementation). The typical workflow for the Reference Implementation is that it will use the policy that was embedded at packaging time to generate the license. If more than one policy was embedded, it will try each one in order until it is able to successfully generate a license (for example, if the first policy requires authentication and the user did not authenticate, the server will try the second policy in the list. If the second policy allows anonymous access (possibly with more restrictions), it will generate a license using that policy. The Reference Implementation supports updating policies through a Policy Update List. The Policy Update List would be generated when a policy is updated, and contains the latest version of any policy that has changed. If you point the server to a Policy Update List in flashacccess-refimpl.properties, the Reference Implementation server will automatically check this list for updates any time it issues a license. Alternatively, if you had an implementation that stores all your policies in a database, you could implement your server to check the database for an updated policy before issuing a license.
As you mentioned, there is another mode which demonstrates four different usage models and uses policy files stored on the server to determine what the license will look like. In this "demo" mode, the server only looks at the policies used at packaging time to determine if anonymous access is allowed or if authentication is required. The rest of the attributes used to generate the license come from one of the four policy files configured on the server (see the "Implementing the usage models" section of Protecting Content for more details).
The License Server for Protected Streaming addresses a slightly different use case (see Flash Access Server Deployment Guide for details). Here, we expect the minimum policy information to be specified at packaging time, and the license server determines the actual usage rules for generating the license. In the PolicyOverrides section of flashaccess-tenant.xml, you specify the usage rules (license caching, output protection, etc.). The license server ignores the policy embedded during packaging and only uses the attributes in the tenant configuration file. If you want to update the usage rules, you simple modify the tenant configuration file -- in this case there is no separate policy file.

anu1106 wrote:
I replaced all files under folder Java\jdk1.6.0_10\jre\lib\security with files which i am using on windows XP.Why? Why not just install the unlimited strength files in the normal way according to the installation instructions given in the distribution file?

Multiple Application Express Installs on one server

What, if any, restrictions / caveats are there for installing multiple Application Express versions on a single server? We have Application Express 2.2 installed and wondering if we can install Application Express 3.0 also.
With 2.2, we have FLOWS_020200, FLOWS_FILES, and APEX_PUBLIC_USER as database users. Version 3.0 will want to create FLOWS_030000, FLOWS_FILES, and APEX_PUBLIC_USER. Any problems with what I expect will be errors on "user already exists" for FLOWS_FILES and APEX_PUBLIC_USER?
Thanks in advance.

Hello,
I'm really sorry but this is a typo on my part. It should be "You can't have two different APEX versions on the same instance."
Does it mean that if we install ApEx v3 we will have only ApEx v3?Yes. This is exactly what it means. The installation script automatically detect previous installed APEX (or earlier HTML DB ) version, and upgrade it. You can end up with only one version per instance.
Regards,
Arie.

What DIAdem version installs NI License Server 3.5 or higher?

Similar Messages

Maybe you are looking for