What did this do and why did this work?

I don't know if it was iTunes 10.5 or Internet Explorer 9, but I could no longer open the iTunes store. I uninstall Norton and still no luck. I was able to get into the store on my husbands computer also using windows 7, Internet Explorer 9, iTunes 10.5. So I decided to try the cmd_netsh winsock reset catalog enter netsh int ip reset.log enter. After I rebooted, I opened iTunes and the store opened right up and I was a shopping. Now can anyone tell me exactly what I did and why it worked? Just so I'll know in case it happens with another upgrade (and you know they will have one).

So I decided to try the cmd_netsh winsock reset catalog enter netsh int ip reset.log enter. After I rebooted, I opened iTunes and the store opened right up and I was a shopping. Now can anyone tell me exactly what I did and why it worked?
Essentially, you're resetting a registry key to its default settings. The settings changes you're reverting might have been inadvertent (due to damage to the key), or might have been deliberately made by a third party program that monitors internet usage (by instituting a Layered Service Provider on the PC). So making the change will possibly impact on the software that set up the LSP.
For more information about LSPs and their interactions with iTunes, see the following document:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store

Similar Messages

  • HT1349 I updated my iphone (G3) and all of my apps are gone!  What can I do and why did this happen?

    I updated my iphone (G3) and all the apps are now gone!  What can I do and why did this happen? 

    Did you perform the update on a computer other than the one you normally sync to? Were the apps in the iTunes library on your computer BEFORE you performed the update?

  • Please someone tell me .... what is super powers and why do I have to pay for this ??  Thank you

    Could someone please tell me what is super powers and why do I have to pay for this...  Thank you

    in my apple account !!  its under subscription...

  • HT201250 What is Airport Utility and why do I need to access this in order to backup my iMac using Time Machine...PLEASE??

    What is Airport Utility and why do I need to access Airport witeless devices in order to backup my iMac using Time Machine...HELP!!! PLEASE??

    AirPort Utility is required to configure an Apple AirPort Base Station or Time Capsule.
    Time Machine can use a Time Capsule or a locally connected volume. You only need to use AirPort Utility if you are using a Time Capsule.

  • What is cookies.sqlite and why does it slow the start up of mozilla by a minute or so. I found it and deleted it,fixed the problem, but it reappears eveery time I restart mozilla.

    what is cookies.sqlite and why does it slow the start up of mozilla by a minute or so. I found it and deleted it,fixed the problem, but it reappears every time I restart mozilla.

    AVG reports these sqlite cookies each time firefox starts. they usually belong to tribalfusion or some other tracker. How do I block them in the first place. I thought firefox is a safe browser. Did not have this problem until I upgraded to 3.6.

  • What are Layers? And why do I need them?

    WHAT ARE LAYERS? AND WHY DO I NEED THEM?
    Layers are an essential part of Photoshop. With Layers you can separate pictures or design elements from each other, as if they are stacked on pieces of glass. With all elements separate, you can move or change them independent of each other.
    Layers are used for many tasks, including improving your images' color or tone; merging two or more images in one Photoshop file; and creating Web designs and animations.
    LAYER BASICS - VIDEO 06:41 min.
    WORKING WITH LAYERS - VIDEO 11:16 min.
    KEY CONCEPT: LAYER
    PHOTOSHOP/ LAYERS BASICS - Reference Guide

    After creating the mask and applying adjustment, you can also adjust and change layer mask using selection tools or, the most common way, using brush tools.
    To have a more accurate preview of what are you doing, Alt + click on the layer mask thumbnail to show the mask in the image area.
    At this point, you will have a layer mask on your screen in large view, so it is easy to fine tune it, but you wont see how that affects your image.
    To seean  instant preview how changes on layer mask affects the adjustments, use New Window for (name of your image) from Window > Arrange.
    Here is a more detailed tutorial on the topic: New Window for.. Command in Adobe Photoshop.

  • What Is Memeo Backup and why is it on my MacBook Pro w/ Snow Leopard?

    What Is Memeo Backup and why is it on my MacBook Pro w/ Snow Leopard?  Does it slow down my Mac? Seems like someting has slowed down my Downloads, Updates, Backups, etc. & I don't know how to locate the source or how to fix. Any Wizards avail to share some Wisdom? I am using Ethernet Cable/Port for Internet Connection, I Use a Seagate  FreeAgent Go Flex Ultra-Portable Drive w/ Seagate's Firewire Adapter Cable.

    If this is really Memeo Backup and you want to get rid of it for a better backup program like Carbon Copy Cloner the the following shows all the stuff that Memeo Backup installer installs (based on Memeo Backup 2.5.141 which I found with a google search and downloaded):
    The primary file to disable Memeo Backup would be that file in LaunchDaemons.  Remove it and reboot and the rest is just taking up disk space. 

  • What is 'Backing up' and why does it take so long even if my library is identical to my ipod?

    I've just plugged by ipod touch into the computer to sync it and it keeps telling me the ipod contains stuff that isnt in my library (eventhough my library is identical to the content on the ipod) and that if i dont back up i will lose this stuff, i clicked back up and now it has been backing up for over 2 hours! what is it doing and why is it taking so long?

    TC has to check to see which files need to be backed up. So its going thru the file directory and looking for any changes since the last backup. Do you have a lot of files on your Mac to check? Or are they just a small number but very large. If its the former, then that might be the culprit.

  • What is a mackeeper and why does it keep popping up? I am brand new to mac. carol h.

    What is a mackeeper and why does it keep popping up? I am brand new to mac. carol h.

    Hi,
    For maintenance.
    http://mackeeper.zeobit.com/
    Check your Applications folder. If you don't want the app, just drag it to the Trash.
    IMHO you do not need this utility. Your Mac will do maintenance for you.
    Carolyn  :-)

  • What is "Directory Service" and why does it "use up 194%" ?

    What is "Directory Service" and why does it "use up 194%" on my istat CPU app monitor?
    Ever since I installed Leopard I've noticed this happening more and more - especially when I install an external hard drive or unplug my ethernet line - this is plainly weird and never happened under Tiger - the temperature shoots up to 84° also - I always to a restart to get rid of it but it's kind of worrying....anybody have any ideas?
    Message was edited by: Host

    Had this happen myself.
    It does have something to do with Spotlight/searching. Should go away after a while, or so I have heard from other users, 'cause it hasn't stopped driving me and my fan mad yet.
    Am going to have my MacBook index and follow-up on indexing and whatever else it feels is necessary to finally allow me to search in peace over the weekend while locking it away where I can't hear it.
    Hopefully that does the trick.
    If it wasn't for things working better/faster and most things looking better I might actually consider taking Leopard off again ...

  • Photo/Video editing PC build; what would you change and why?

    I'm in the planning phase of my first photo/video editing PC build.  I've done quite a bit of research to this point, and I've finally come to a decision on all of the components (I think).  After seeing how helpful everyone is on this forum, I decided to post my plan and see what everyone thinks.
    Miscellaneous info:  I am an amateur photographer looking to expand my horizons and venture into the video realm.  I will be running Windows 7 64bit with Adobe CS5 Production Premium and Lightroom 3 on a singe solid state drive and everything else will be on a 3 drive RAID 0 config.  Eventually I plan on purchasing a RAID card and a few more drives for a RAID 3 (or 5) config, but that won't be for a while.
    Ok, here's my planned build...
    Component
    Description
    Processor
    Intel   Core i7 - 950 3.06GHz Quad-Core Processor
    Motherboard
    ASUS   P6X58D-E LGA 1366 Intel X58 ATX Intel Motherboard
    Memory
    Corsair   Dominator 12GB (6 x 2GB) DDR3 1600 (PC3 12800) Triple Channel Memory
    System Drive
    Crucial   RealSSD C300 2.5" 128GB SATA III MLC Internal Solid State Drive
    Data Drive(s)
    3 - Western   Digital Caviar Black 1TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal   Hard Drive (Configured in RAID 0 for now)
    Optical Drive
    Pioneer   BDR-205BKS Blu-ray Burner
    Video Card
    EVGA   GeForce GTX 470 (Fermi) SuperClocked 1280MB 320-bit GDDR5 PCI Express 2.0 x16   HDCP Ready SLI Support Video Card
    Power Supply
    Corsair   HX Series CMPSU-850HX 850W ATX12V 2.3 / EPS12V 2.91 80 PLUS SILVER Certified   Modular Active PFC Power Supply
    Case
    LIAN   LI PC-A71F Black Aluminum ATX Full Tower Computer Case
    Monitor
    NEC   MultiSync PA271W-BK-SV 27" Widescreen LCD Monitor with SpectraViewII   Color Calibration Solution
    So, what would you change and why?
    I'm looking forward to your responses!

    "I'll take your advice and go with Samsung F3s.  With the money I save  (by not getting the WD Caviar Blacks), I'll add a 4th drive and use the  RAID5 on the mobo until I can afford to upgrade to a proper RAID  controller."
    I might be a bit late, but wanted to let you know about motherboard software RAID configs (at least mine):
    I have an older system running an ASUS P5AD2-E Premium MB containing a Silicon Image 3114 RAID chip. I originally configured a RAID 10 array with four 74 G Raptors for speed and redundancy. Figured if I lost a disc, I could just rebuid the array. Come to find out, the Sil 3114 chip does not support rebuilding the RAID 10 array.
    I had lost a disc (disc was okay, just power to the disc was interupted) so was running on three. Fixed my power problem, went to rebuild the array and couldn't. So I figured what is the point of having a RAID 10 that I couldn't rebuild. Went to a RAID 0 with a backup disk.
    Never checked the documentation to see if software RAID 5 through the SIl 3114 was rebuildable.
    Mind you, I am not a computer guru nor all knowledgable about software/harware based RAID configs. But after talking to others who are the guru's, I found that I should stay away from the motherboard software RAID arrays and they mirror what Harm said about hardware RAID boards. But on a budget, the RAID 0 with a backup drive works for me.
    Just my 2 cents to help.
    Tony

  • What are smart mailboxes and why do i need both smart and "normal" ones?

    What are smart mailboxes and why do I need both smart and "normal" mailboxes?

    Hi Kingoftypos,
    Thanks for that clarification. So, now it appears that the ultimate purpose of a Smart Mailbox is to point to all emails that meet the criteria in a single place, so if they are spread among several mailboxes, you will be able to see them all together. Here is an article from Apple that describes it:
    A Smart Mailbox displays in one location messages that are stored in other mailboxes, so you don’t have to move messages between mailboxes. The messages displayed by a Smart Mailbox are based on criteria you define, and are automatically updated to include new messages that match your criteria. For example, you might create a Smart Mailbox that displays all messages found in all mailboxes from a specific sender.
    If you change a message in a Smart Mailbox, such as marking the message as read or unread, or moving or deleting the message, the change is reflected in the mailbox where the message is actually stored.
    So, adam, I would think that, if you had mail going to a lot of different places, and wanted to be able to see a particular set of those in a single place, you would use a smart mailbox. Maybe use the rules to direct your mail to different places to start with, but a smart mailbox to bring a set of common ones all together into a single smart mailbox?
    Maybe you have Rules move your Amazon mail to an Amazon folder and your Apple mail to an Apple folder, but then you have a Smart Mailbox that contains any mail that has the word "Receipt" in the Subject line?
    Just a thought....
    Cheers,
    GB

  • What is flash player and why do i have to download it ?

    My computer won't show any videos on safari because it says I need to update flash player. What is flash player and why do i have to download it? I thought flash player comes with your computer.

    1. A browser plugin for Flash content.
    2. Apple no longer bundles it with Mac OS X.
    (119030)

  • What is a url and why is it needed to use photoshop

    What is a URL and why do I need it to use photoshop on my computer?

    what problem are you seeing?

  • Query as Web Services!!! What are its uses and why do we need it?

    What are its uses and why do we need it.. if other tools like Dashboard and crystal reports and Webi can connect to universe and create reports and Analytics...

    Hello  Rajsan Madhavarajan  
    Query as a Web Service (QaaWS) is a SAP Business Objects (BOBJ)  client-side tool that allows users to create and publish Web Services that can be made available over the Web.  Once these web services are created and published,  they can be consumed like any other standard Web Service in software applications including Xcelsius and Crystal Reports.   But first we have to understand what exactly is a Web Service.
    Web Service
    A Web Service is a software system that supports  interoperable interaction over a network from one computer or machine to another but is more commonly defined as a client and a server communicating data over the Web using the HTTP Protocol. Using Web Services along with Business Objects allows a live connection of data to be used in applications such as Xcelsius and Crystal Reports through a semantic layer called a Universe.
    Query as a Web Service (QaaWS)
    The two main components in QaaWS are the Client Tool and the Server.  The QaaWS Client Tool gives the end user an easy to use wizard that allows them to create Universe queries and publish them as Web Services.  Once the QaaWS is published, any user can securely access the data that the Web Service contains as long as they have access to that server. Have a look on  image below that shows the information flow to and from the server via the client.
    Advantages to QaaWS:
    Very easy to use and intuitive interface Familiar look and feel for people who have used Web Intelligence
    Leverages existing Business Objects Universes Shares metadata with Web Intelligence, Desktop Intelligence and Crystal Reports
    Maintains Business Objects Enterprise Security
    Allows live data feeds to be incorporated into Xcelsius Dashboards and Crystal Reports

  • What is global Area and why is depreciation Area 01 considered global Area

    Hello Forum,
    What is global Area and why is depreciation Area 01 considered global Area
    Thanks
    Best Regards
    D. Swathi

    Hello Forum,
    What is global Area and why is depreciation Area 01 considered global Area
    Thanks
    Best Regards
    D. Swathi

Maybe you are looking for

  • Vendor-Specific Tolerence Groupsare not working in MIRO

    Hi We have defined new Tolerance group-1000 and assinged in vendor master. This Telerance group is to allow $10+/- for small differences It works fine for Autmatic acceptance of positive differece up to $10, with/without taxes. But It doesn't work fo

  • Function key actions not working

    I'm using Illustrator CC (v. 17.1.0) on an iMac. For ages, I've had actions set up. I have function key strokes attached to those actions. Just recently, they stopped working the way I want them to. For example, I have an action where I select text.

  • Tools to upload data into SRM 7.0 with webdynpro for ABAP

    Hi, Webdynpro for abap is used in SRM70. I need to load data in SRM70 (product category...). ECATT is not working with web dynpro for abap. What other tools can i use to load data in SRM70 ? LSMW ? I would like to avoid to create a Z program to load

  • In iMovie HD 6 can you merge both DV widescreen and HD in the same movie?

    I have a Sony HDR-FX1 and have shot both formats and would like to now merge them into the same movie. In my old iMovie it does not appear to allow me to import both formats it will say camera not connected when the camera is set to a different forma

  • C100 Viewfinder Issue // HELP!

    Hey there, hoping to hear from some C100 users.  Recently I've noticed an issue with my viewfinder (which I don't use too often, but every once in a while).  For seemingly no reason my viewfinder screen will wack out and look almost like it's posteri