What different between ADF Rich Portlet and Trinidad HTML Portlet?

Hi all,
I've some question about adding portlet to portal pages
What different between ADF Rich Portlet and Trinidaf HTML Portlet?
And benifit of each?
Regards

Hi all,
I've some question about adding portlet to portal pages
What different between ADF Rich Portlet and Trinidaf HTML Portlet?
And benifit of each?
Regards

Similar Messages

  • Secret inputText in adf rich client and trinidad

    Hello All ,
    i have <tr:inputText id="password"
    secret="true"
                             value="#{editUserBackedBean.userBean.passWord}"
                             simple="true"
    be careful this input text is secret ,
    i want to edit this value,which is already filled,but when i submit the value without any change, it will not set to the server.
    so i want to submit the secret value as it come from server side is there any way to do this ?
    thanks all

    Dear Frank ,
    when i set the default value it will be saved always when the user does not change it and submit.
    So my problem is that i need some way to keep secret values as is come from server to submit it without changes ;

  • What is difference between ADF Task Flow and Faces-Config - when delpoy ?

    What is difference between ADF Task Flow and Faces-Config? When I create navigation between pages with ADF task flow then the navigation don't work when I deploy my application to Weblogic 10.3. When I use default server then navigation works fine. With Faces_config in both situations all works ok - on Stanalone server and default.
    Where is the problem?
    Best regards!

    Shay, I don't use both faces-config and adf task flow! When I failed with task flow I tried faces-config.
    I have active on my weblogic - adf.oracle.domain(1.0,11.1.1.0.0). This is the right ADF? If yes then where is the problem?
    Best regards!

  • What is the different between payment methods Wire and EFT

    Hi All
    can anybody tell me What is the different between payment methods Wire and EFT ?
    Regards ;

    WIRE:
    Wire is transfer of amount due directly to the supplier's bank it is an electronic transfer of funds
    This mode of payment is used for international suppliers.
    It can be paid in foreign currency or USD.
    Wire payments are same day payments.
    EFT:
    EFT ensures funds transfer from one bank account to another using electronic links.
    Can be used to make payments into domestic banks (within US) in USD only.
    It is faster than check payments.
    Hope this helps.

  • What Different between RTM and full version?

    Hi I Wonder what different between windows 7 RTM version then windows 7 full version? is it if we use windows 7 RTM means that we have to buy the upgrade if windows 7 release?? or not??

    Hi Linda,
    What does the difference it create with Team foundation server?
    I'm using TFS10.0.30128.1 RTM ,and want to upgrade to full version.
    Kind Regards,
    Arun
    Arun,
    RTM is a "full version".  There is nowhere to upgrade to from RTM.  Maybe, one could call it an 'upgrade' if from Win7 (RTM) to Windows 8.1
    Cheers,
    Drew
    Drew MS Partner / MS Beta Tester / Pres. Computer Issues Pres. Computer Issues www.drewsci.com

  • Re: What is the different between the NB550D-109 and the NB550D-10G?

    Hello Guys . I need some help about the NB550D. What is the different between the NB550D-109 and the NB550D-10G?? Is just the colour?

    I've checked local and internet shops - strange thing - now, a month after they've started to sell NB550D, in my country (Poland) you can buy only 10J model (with C30) - only green! But the price changed from 1299 to 1199 :)
    And 10G model (blue with C50) disappeared - sold out!!!???

  • What is the different between Oracle Process Manuf and Oracle Discrete Manufatur in oracle?

    Dear What is the different between Oracle Process Manufacturing and Oracle Descret Manufacturing in Oracle?

    Hi Elad,
       Depending on the requirement and the availability we go with implementing a particular database.
    For xi point of view there is no difference between oracle and SQL database. However you need to intall the drivers of SQL.
    Even there is no difference in the communication channel configuration.
    Reward points if found helpful.
    Thanks & Regards,
    Bharath.

  • What is the different between MacBookAir MD711ID/A and MD711ZA/A?

    What is the different between MacBookAir MD711ID/A and MD711ZA/A? Is it only the OS? Or is there any other different specification? Thank you.

    No, there isn't. There isn't a difference in the OS either; if they shipped with different OS versions, it's because of the passage of time and not them being from different countries.
    (103730)

  • Whats is the different between iphone sim free and international(unlocked)??

    Greetings sir,
    whats is the different between iPhone sim free and international (unlocked)?? as i want to buy anew one from USA, but i didn't found it international, so can i buy it (SIM free) and will it work in Egypt?

    Apple has not announced when or if it will be offering unlocked iPhone 6 in the U.S.

  • Different Between KT4V ver1.0 and KT4V v10A

    Hi guys, when i just bought a new MSI KT4V from a shop, it was version 1.0, but 3 month later i send for warrantty claim, they return the board to me (I think they  replace the board, but i dun think it was a new board, it was a used board), but it was KT4V Ver10A, i bought this board at Malaysia, do anybody know about it ?? Can let me know what is the different between Version 1.0 and 10A ????  ?(
    In my mind, i think maybe is KT4V Ver 2.0  :D
    I got send mail to MSI official site, but sadly it auto reply by the machine, do anybody know how to send a mail to technical support which will reply and give a solution for you problem ???

    The cpu temp looks to be slightly high for an idle temp.  Could be caused by too much thermal grease or poor airflow through the case, even by high ambient temps in the room where the system is located.  These temps are normally measured in centigrade and should not exceed 43 degrees to 45 degrees at idle.  Yours appear to be about 50 degrees.

  • Different between work order closed and completed

    HI experts
    I would like to know what is different between closed work order and completed on SAP PM Module.
    regards
    nasser

    See this conversation:Completed is technical comptete (TECO) - the technician has done his/her work, closed is settled and done also from an accounting perspective (settlement)
    PM Work Order TECO and CLSD
    http://scn.sap.com/thread/3158261

  • What different between Hong Kong, Chinese or American version devices?

    Hi. What different between Hong Kong, Chinese or American version devices? Thank you.

    Thanks to all. I want to buy a new iphone and in China the big difference in price. The seller says that HongKong version is better because is special better material, is it true?.And difference in price between CN ZP and American is nearly 200$. I want to know except the bands have any difference?

  • Different between Independent Multiple Sample, and Dependent

    Hi Craig and QM gurus,
    What is the different between Independent Multiple Sample, and Dependent Multiple Sample?
    I read the SAP library and am still confusing.
    thanks

    hi
    In very simple terms...
    In case when you are using a sampling scheme .....You will find the acceptence Number & rejection Number(C1 &D1)
    When after sampling & maintaining C1 & D1 still you can not reach to a conclustion then you can also maintain next level C2 & D2
    Dependent multiple samepling : C2 & d2 are depend upon C1 & D1.
    Ex:
    C1: 1   & D1:3
    you have found 2 sample rejecet..you can not reach to conclution then maintain C2 & D2 for next level of sampling.
    Independent:when first level is not depend upon second level.
    I hope this is clear.
    Regards
    Sujit

  • Exchange rate is different between records in OB08 and records in document.

    Hi Gurus,
    The exchange rate is different between records in OB08 and records in calculated amount in line item. How does it happen? Not all of the documents in the same period has this problem.
    For example, a document A created by FB05 on Jun 30 2010.
    In OB08, the exchange rate is 6.80000. This rate was the same in the header of document A.
    In the line item of doc A, I calculated the amount for line itme 1 and 2. Line itme 1 shows the exchange rate is 7.90000. Line item 2 shows the exchange rate is 16.0000. ( The exchange rate is not that exactly an interger. I put a similar exchange rate as an example.)
    Could you please throw some light on these? Why some documents are okay but for some, the exchange rate is so different?
    I just found that the exchange rate of some of the document line item calculated is from another currency. It shows in the line item (in question) button "More Data". Shall I know how the exchange rate was got from another currency exchange rate?
    Thank you.
    Emma
    Edited by: qun yang on Aug 2, 2010 10:49 AM

    Issue solved by below solution:
    Existing:
          append lines of vit_final to s_s_if-maxsize to e_t_data.
          delete vit_final to s_s_if-maxsize.
        else.
          append lines of vit_final to s_s_if-maxsize to e_t_data.
          delete vit_final to s_s_if-maxsize.
    New:
          append lines of vit_final to e_t_data.
          delete vit_final to s_s_if-maxsize.
        else.
          append lines of vit_final to e_t_data.
          delete vit_final to s_s_if-maxsize.

  • Is any different between ECC 5.0 and ECC 6.0 for Excel export?

    Dear all,
    As you know, most standard SAP report allow Excel export. I just wonder is any different between ECC 5.0 and ECC 6.0 for excel report in standard SAP reports?
    In ECC 5.0, Reports in profit center accounting, LIS, or PA, etc. has their own different way to export to excel and is any improvement in ECC 6.0? I Thanks.

    In ECC 5.0, a lot of reports don't have Excel export function instead user has to go to system -> List -> Save -> Local file -> spreadsheet.
    I just wonder is any improvement in ECC 6.0? just like LIS report, user can select export -> Transfer XXL to either pivot table or just plain excel but the function only exist in certain reports in some modules and not all.
    Thanks again.

Maybe you are looking for