What dimentions (width x hight) i should use for an animation file so it appears correctly on tv. help please

Hi every1
well i'm just asking a beginner question.
what to prepare for a file wich will be played on tv. ( i
knew that there is some things i should do in order to publish it
correctly on tv so no errors happen while playing)
I'm making an intro to be shown on tv. i'm using flash and
imageready and 3ds max.
but the question is : what are the dimensions i should use so
that the animation shows correctly on tv.
I mean the width and the hight of the file. please help coz i
really need this info.
and if there is any other things i should do in order that it
appears correct on tv, please tell me.
Oh is there any things i should do like 3ds max, i mean while
rendering i have to choose pal instead of custom or secam.
so please tell me what i should do in flash and imageready to
produce it right.
Note: what i'm doing will be for tv. and not for web !
and i'm so thankfull.
thanks to every1 who will help!

Moe,
How will you be delivering the final product? The easy
answer is that NTSC resolution is 640x480 at 30 frames per second.
If you are in Europe, then you will be dealing with PAL format,
which I am less familiar with, but is 720x576 at 25 frames per
second. If you are talking about high definition, then you'd need
1920x1080. It is certainly a bit confusing, with so many standards
out there...
I wish this was a simpler answer. A few links...
http://www.michaeldvd.com.au/Articles/PALvsNTSC/PALvsNTSC.asp
http://hometheater.about.com/cs/television/a/aavideoresa.htm

Similar Messages

  • What version of microsoft office i should use for my ibook with 700mhz?

    I have an ibook G3
    Im not sure which microsoft office I should use.
    I bought the 2008 one but i noticed its not compatible.
    My ibook G3 has...
    -700 MHz PowerPC G3
    -640 MB SDRAM
    Im guessing Microsoft Office 2004 but im not really sure.

    Yes, that should do (if you are running Mac OS X 10.2.8 or later).
    Check out the system requirements for Microsoft Office 2004 for Mac at Amazon.com.

  • What kind of material type i should use?

    Dear all,
    I am wondering what kind of material type I should use for the following type of material:
    The material is Chicken used in like KFC- type of eatery franchise store.
    The eatery franchise store buy the chicken from external party, next, this store process this chicken (i.e. cut into pieces) and become chicken salad and sell this chicken salad to their consumer.
    Personally, I donu2019t think this kind of material can be classified as HAWA (i.e. trading mat type) as the material is not buying and later selling as a same physical product like the retail store.
    But it is buy and process it, and sell.
    Please help shed some light for me. Thanks.
    tuff

    Hi we have not using SAP, it is a new project.
    kindly please read my question carefully...
    basically it is like this...
    the chicken the restaurant chain purchased are later process into multiple meal dishes (i.e. Salad Chicken, Chicken with rice, Roast Chicken), and sell to customer directly.
    Therefore, looking at your feedback, I can use the SEMI-FG material type for the Chicken for the buying, correct?
    But this raise another question in which how do I track the goods issue quantity when the meal dishes is sold, so that my Chicken stock quantity can reflect correctly in the SAP system?
    currently they are not using BOM as the franchise holder does not wish to disclose the meal ingredient scret (i.e BOM) to their invidual franchise store.
    please advise. thanks
    Thanks.
    Tuff

  • What format i should use for my external hard drive that can be used interchangeably between mac and pc?

    What format i should use for my external hard drive that can be used interchangeably between mac and pc?

    Usually Fat32/MS-DOS as mentioned, but that has several limitatiuns, like 4GB filesize limit.
    One option is MacDrive for you PCs... allows them to Read/Write HFS+...
    http://www.mediafour.com/products/macdrive/
    More options...
    NTFS-3G Stable Read/Write Driver...
    http://www.ntfs-3g.org/
    MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
    http://www.osnews.com/story/16930

  • What kind of database driver should use for database adapter  in BPEL?

    what kind of database driver (XA or non-XA) should use for database adapter in BPEL? I have only one database adapter and no JMS.
    Thanks
    Jo
    Edited by: 799095 on Sep 30, 2010 8:35 AM

    Hi
    It depends on wheter you need XA transaction or not.
    See http://www.theserverside.com/discussions/thread.tss?thread_id=21385 third reply.
    If you only have one database and no synchronous dependency to the caller, non-XA should be OK.
    -Johan

  • What image resolution should use for the new iPad with Retina display?

    What image resolution should use for the new iPad with Retina display?

    http://www.ipadcasereview.com/ipad-3-cases-and-covers-top-of-page/#sthash.hZKnxH ku.dpbs
    these are the best

  • I have a OS X 10.7.5  what is the next upgrade I should use?

    I have an OS X 10.7.5  what is the next upgrade I should use?

    The only further OS upgrade available is Mac OS X 10.8.3, which is in the Mac App Store.
    (81815)

  • How to set a specific width to all the TextInputs used in a mxml file on its creation complete?

    How to set a specific width to all the TextInputs used in a mxml file on its creation complete?

    Hi subhajit nag,
    I think the best approach would what I say is if you can make use of a Global variable or using a Singleton class having a variable which can be accessed globally through out the application.
    Below is the sample what I am talking to:
    So in below example you can access the variables textInputWidth and textInputHeight globally throghout the application since you have decalred them in main mxml file.
    You can access these variabled in another mxml file as Application.application.textInputWidth and Application.application.textInputHeight. So if at all you are required to modify these values you are only required to modify at a single place in main mxml file..thats it.
    If you are use any Singleton classes like ModelLocator you can place these variables in this class and refer from that class.
    Hope this resoved your problem..
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical">
    <mx:Script>
      <![CDATA[
       [Bindable]private var textInputWidth:int = 250;
       [Bindable]private var textInputHeight:int = 25;
      ]]>
    </mx:Script>
    <mx:Canvas id="canvas1">
      <mx:TextInput id="txt1" width="{textInputWidth}" height="{textInputHeight}"/> 
    </mx:Canvas>
    <mx:Canvas id="canvas2">
      <mx:TextInput id="txt2" width="{textInputWidth}" height="{textInputHeight}"/> 
    </mx:Canvas>
    <mx:Canvas id="canvas3">
      <mx:TextInput id="txt3" width="{textInputWidth}" height="{textInputHeight}"/> 
    </mx:Canvas>
    <mx:TextInput id="txt4" width="{textInputWidth}" height="{textInputHeight}"/>
    <mx:TextInput id="txt5" width="{textInputWidth}" height="{textInputHeight}"/>
    </mx:Application>
    If this post answers your question or helps, please kindly mark it as such.
    Thanks,
    Bhasker Chari 

  • What is the serial on the iphone used for?

    What is the serial on the iphone used for? I ask because im seeling my iphone to someone and they asked me for it. Why do they need it? Should i give it to them?

    The only thing they can do with that is check warranty status.

  • GPO - Restricts the UI languages Windows should use for the selected user - not applying correctly on RDS 2012 R2

    Hi All,
    we have a Citrix XenApp 7.5 Farm with Windows Server 2012 R2 Servers and multiple (english, german, italian, spanish, french...) languages installed.
    I've created a GPO with settings 'Restricts the UI languages Windows should use for the selected user' to for example 'German'.
    Now when a user logs on to the server, the UI language is in german, but when i open Control Panel\Language: There is still English (United States) with Keyboard Layout: US, German.
    It seems that the GPO is not changing all settings correctly to german.
    Does anybody know what could be wrong?
    best regards,
    Siegmund

    Hi Siegmund,
    >>Now when a user logs on to the server, the UI language is in german, but when i open Control Panel\Language: There is still English (United States) with Keyboard Layout: US, German
    Based on the description, the policy setting should have been applied successfully. Here, did we logged onto the server via remote desktop services? If yes, what's the keyboard layout on the computer we used to RDP to the server? Before going further,
    I assume that this can be caused by Auto detect Remote Keyboard layout feature introduced since Windows Server 2008.
    Regarding this point, the following artcile can be referred to for more information.
    Windows 2008 R2 Language Bar keeps changing Keyboard Settings
    http://www.microsoftpro.nl/2011/02/24/windows-2008-r2-language-bar-keeps-changing-keyboard-settings/
    Note: For the above website is not hosted by Microsoft, the link may become invalid without notice and Microsoft doesn't guarantee the accuracy of the information.
    In addition, the following thread can also be referred to for more information.
    2008 R2 Session Host with MUI controlled via Group Policy
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/4e14955a-80f9-40aa-9741-fc8609f4ad09/2008-r2-session-host-with-mui-controlled-via-group-policy?forum=winserverGP
    Best regards,
    Frank Shen

  • What camera raw default settings would you use for the Canon 5D Mark 3. I have PS CS6.  Thank you.

    What camera raw default settings would you use for the Canon 5D Mark 3. I have PS CS6.  Thank you.

    Really, this is a question you should be asking yourself...
    What do you shoot? Makes a difference...
    Typical ISO that you shoot? Makes a difference...
    Shooting for clients or yourself? Makes a difference...
    Look, there is no magic bullet...the ACR/LR "Default" should only be changed for those adjustments you make 70-90% of the time and sould not be confused with image by image adjustments...
    So, as asked, your question can not really be answered other than to say, use a default that suits you.

  • What is the best I/O to use for a MUD?

    What is the best I/O to use for a MUD?
    It seems that people usually show I/O examples with IOs like:
    BufferedReader in = new BufferedReader(new InputStreamReader(socket.getInptuStream()));
    PrintWriter out = new PrintWriter(socket.getOutputStream());
    out.println("Hello World");
    out.flush();
    PrintStream out = new PrintStream(socket.getOutputStream());
    out.println("Hello World");
    out.flush();When I say 'best I/O' I mean, can you give me an I/O that'll be the best if a MUD starts getting LOTS of request and becomes rather busy?
    Thanks!
    -Neo-

    One last question, are output streams thread safe?A stream is inherently serial in the way it data is written to it. If two threads try to write to the same stream asynchronously, the ordering of the data written will not be predictable.
    For example:
    One class is recieving input from a user and
    reply-printing thing like "Command Successful", and
    another class is recieving messages from other users,
    but the PrintWriter would be originally created in the
    first class and then passed as a parameter to the
    second class...would this work, or should I just
    redirect all command replies to that second class?If they are in the same thread, then it could work. If there are separate threads, then some higher granularity synchronization needs to be imposed, so that the second thread doesn't start writing part way through the first's output.
    For example:public class NeoThreadWriter implements Runnable {
      final String name;
      final int delay;
      final boolean synch;
      NeoThreadWriter (String name, int delay, boolean synch) {
        this.name = name;
        this.delay = delay;
        this.synch = synch;
      public void run () {
        if (synch) {
          new Synch().run();
        } else {
          new ASynch().run();
      class Synch implements Runnable { 
        public synchronized void run () {
          synchronized (System.out) {
            for (int i=0; i<6; i++) {
              System.out.println(name+":"+i);
              try {
                Thread.sleep(delay);
              } catch (InterruptedException iex) {
                iex.printStackTrace();
      class ASynch implements Runnable { 
        public synchronized void run () {
          for (int i=0; i<6; i++) {
            System.out.println(name+":"+i);
            try {
              Thread.sleep(delay);
            } catch (InterruptedException iex) {
              iex.printStackTrace();
      public static void main (String[] args) {
        try {
          Thread threadA = new Thread (new NeoThreadWriter ("A", 40, false));
          Thread threadB = new Thread (new NeoThreadWriter ("B", 20, false));
          System.out.println("asynchronous threads");
          threadA.start();
          threadB.start();
          threadA.join();
          threadB.join();
          System.out.println("synchronized threads");
          Thread threadC = new Thread (new NeoThreadWriter ("C", 40, true));
          Thread threadD = new Thread (new NeoThreadWriter ("D", 30, true));
          threadC.start();
          threadD.start();
          threadC.join();
          threadD.join();
          System.out.println("Done");
        } catch (InterruptedException iex) {
          iex.printStackTrace();
    }With asynchronous threads A and B, the output is all mixed up. With synchronized threads the ordering of the output is maintained. Note that the guard has to encompass all of the code that generates the output; simply synchronizing the println invocations wouldn't prevent the mixing.
    Pete

  • Which protocol we should use for file transfer in ios ?

    which protocol we should use for file transfer in ios ?

    My friend that's definitively a Lotus Domino question, you'll probably ask in the Domino's forums if it generates wsdl, or simple http services you're ready to consume those services in Flex.

  • Which cable should use for Sony DV connect to iMac ?

    Which cable should use for Sony DV(IEEE 1394)connect to iMac ?

    If your iMac has just the FireWire 800 connection, you will need the 9 pin to 4 pin cable.
    http://www.cwol.com/firewire/firewire-800-1394b-cables.htm
    If your iMac has the FireWire 400 connection, you will need the 6 pin to 4 pin cable.
    http://www.radtech.us/Products/ProCableFW400800.aspx
    Links are to illustrate examples. You should be able to pick them up at most computer stores.

  • HT1586 What's the best HDMI switcher to use for Apple TV?

    What's the best HDMI switcher to use for Apple TV?  My widescreen TV has only one HDMI outlet and it is in use. 
    Thanks,
    Joanna

    Anyone sold by MONOPRICE.COM are really worth buying!

Maybe you are looking for

  • My new imac is on the way.   MS Money not available for Mac?  Options?

    Thanks to all who have given this PC user advice as I move over to a MAC at home. I have ordered a 24 inch Imac that is on the way soon. I have used MS Money. Looking around the internet it looks like this program is unavailable for a MAC. I've read

  • Unable to view SmartList in Planning webforms in 11.1.1.2

    Hi Friends, I am using Hyperion Planning 11.1.1.2 webforms. I am Unable to view SmartList in Planning webforms. steps I have done: 1.Created a SmartList. 2.Added entries to Smartlist 3.Assigned the SmartList to a dimension Member(Account Member). 4.I

  • Creation of Materials Using MATERIAL_MAINTAIN_DARK

    Hello All, Im trying to create Materials using the Function Module MATERIAL_MAINTAIN_DARK in program. Problem is that, In tables of the fuction module amarc_ueb, amakt_ueb and amard_ueb , Im passing 2 records in each tables. But the MARC, MAKT and MA

  • 6303i Classic modem doesn't work - why?

    In the 6303i user manual:  "You can use your device as a modem by connecting it to a compatible PC. For details, see the Nokia Ovi Suite documentation" Based on this I just bought a 6303i and wasted a morning trying to get the modem to work.  I can c

  • Integration between Soluiotn Manager and HP Quality Center

    Hi Folks, I am currently configuring the integration between Solution Manager and HP Quality Center, and during the set up of communication user, I get the following error: User hpqc_comm is not authorized to access projects Message no. QC_INTEGRATIO