What dll do I use and where are the .h include files?

I recently downloaded the wavetek 271 drivers and have found that when imported (Lab View 6.0) that they need to be linked to a dll. But which one? And the includes call for the glib.h and other libraries where are they at. Are they compressed?
thanks

Hello-
There are two versions of this driver one for LabVIEW (NI's graphical language) and one for LabWindows-CVI (NI's text-based language). Be sure to download the proper type of driver.
In LabVIEW, the driver should be placed in LabVIEW\instr.lib.
In LabWindows-CVI, it's necessary to Load the driver from the Instrument>>Load... menu. The files should be placed in cvi\instr.
Randy Solomonson
Applications Engineer
National Instruments

Similar Messages

Where are the actual Aperture files located? Only in the application? I am transitioning to Lightroom and would like to only move some of the files. Advice appreciated. Also anyone know how to transfer in with edits?

Where are the actual Aperture files located? Only in the application? I am transitioning to Lightroom and would like to only move some of the files. Advice appreciated. Also anyone know how to transfer in with edits? Using iMac, OS X, most recent Aperture and Lightroom 5.7 with plugin for Aperture.

Define "the Aperture files".
Read this concise guide.
The files you imported into an Aperture Library can be exported (at any time, and repeatedly) using the command "File ▹ Export ▹ Originals". Your Originals are never altered. What went in is what comes out.
Adjustments and changes to the metadata that you made since creating an Image in Aperture by importing a file are saved to a text file. This file is combined, on-the-fly, with the Original to create the Image that you see in Aperture. There is no file saved to disk that is the full-size Image. Thumbnails are saved, and Previews are saved. These are JPG files, almost always smaller than the Original. They are not substitutes for the Image for the use you have.
When you need a file of an Image to use in another program, you export the Image from Aperture. "Export" means "Make me a file of this Image according to these file specs I'm providing". The way to get files of your adjusted Images is simple: create them by exporting. Specify "Original size", and use a loss-less image-file format (e.g. TIFF 16-bit) if you want to retain as much visual information as possible.
Search the Web for information about transitioning from Aperture to Lightroom. Note that I say "transitioning". You cannot move a database from one format to another without significant changes, and likely some loss of information. Adobe provides a tool and some instructions. I strongly recommend working out the process step-by-step, and then proceeding with first a few Images, then a bushel-ful, and stopping to use the first few, the the bushel-ful, before committing your entire collection to the process.
As always, never use any computer file without having a back-up.
We have seen mixed reports here of the success of the LR tool that creates a LR database from your Aperture database.
If you want to carefully define the process, and test and refine it, use the excellent process-development, analysis, and execution program inShort.
Sadly, there is not and can never be a good, thorough re-positioning of the digital assets in your Aperture Library to become digital assets in a LR database. Just as a metaphor for any user contemplating transitioning to another digital asset manager: that would be like digging up a house in one country, planting it in a hole in another country, and expecting to be able to use the toilet and the sinks, turn on the lights, cook dinner, and sleep soundly.
HTH,
Kirby.

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installrg a purchased Snow Leapord on the machine. To install Windows, am I limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk? Download? Tha

I have an older Mac Pro (2006). I want to install Boot Camp and Windows. I have installed a boxed Snow Leapord on the machine. And it says the download of the Boot camp drivers cannot continue because they are not available. But at that point I have not inserted a windows disk, so how does it know i have XP?
So it appears I am limited to Windows 7? And where are the Windows 7/Boot Camp Drivers? On the OS disk?
Finally, since I have necer considered Windows 7 before, I assume there are no compatability issues with mainstream applications that were running in XP?
Thank you.

You're welcome
Just remember to reformat the partition (bootcamp partition) to NTFS with the windows installer, ensure to pick the correct partition.

Just where ARE the site definition files?

I've just received CS4. I want to move it to my more powerful laptop when I install it. I know how to do that and I can move site files, but where are the site definition files? I really don't want to have to set up each site from scratch. Is there one (or more) files that are the name, url, location, id, password etc for each of the (many) sites in CS3?
don Carlos

To import/export site definitions (not site files):
On the old computer:
Site > Manage Sites
Shift click to highlight all site names
Export..
Same procedure on new computer then Import..

My albums show 342 pictures (80 hidden) What does this mean and where are the other pictures?

Iphoto album shows 342 pictures (80 hidden) in upper rt hand corner? Where are the hidden pictures? and how add them back into the album?

in iPhoto view menu ==> Click on Hidden
LN

Do you send the real traffic or a copy when you are using the CWS service and where are the datacenters located ?

Hi, when you redirect traffic to the CWS service for scanning, do you redirect the real traffic this way or is it a mirrored copy of the traffic ?
If all traffic is redirected to the Cloud, where are the Cisco datacenters located. Good to know I guess, since you don't want to avoid to much of latency
/Jan

Toddy, see [http://news.cnet.com/8301-30685_3-20004620-264.html?tag=mncol;txt]

Anchor point in the Graph Editor and where are the Tips

Hello All,
What is the purpose of an anchor point in the Graph Editor when you have "Show Transform Box when multiple keyframes are Selected" engaged. The pointer automatically turns into a PanBehind tool. I moved it inside, outside, on the line and it doesn't seem to have any inpact on the scaling of the transform box. Not only that, it pops back to the center when you switch from "Edit Speed Graph" and "Edit Value Graph"
I haven't used the graph editor much, if ever and was also curious to know what/where are the graph tool tips. I haven't seen any difference when Show Graph Tool Tips is selected.
Thanks in advance
on a mac cs5.5

OK, I see the Tool Tips are displayed when you hover over a keyframe or the path that is made.

I need to do a clean install of maverick on my 2010 mbp what disk do i use and how do i move certain files from an external hard drive

I want to do a clean install of maverick on my 2010 mbp. I need to know what disk to use and also how i take certain files off my external hard drive and put on my computer. When I was having problems with my airport they did a clean install and they pulled files of my time machine.   however they forgot to put the partition back in for a windows side. Originally I had Parellels on my computer. After my external hard drive got corrupted i called apple and they fixed the problem but didn't have me set up the time machine except for the external hard drive. Now my only back up is from the external not from the laptop.    I am not sure how to do any of this. I am not computer savvy...PLEASE I NEED HELP>

First, you need to make a backup of your MBP onto your external drive. I suggest you start by cloning your MBP drive to the external drive:
Clone Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
This clone is fully bootable and also contains a clone of your Recovery HD.
Second, you need to do a clean install of OS X onto your MBP as follows:
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
This should accomplish your goals. You will have a clean install of OS X on your MBP and a bootable clone of your old system and all your files on the external drive.

Where are the buttons gone File upload and Download in New ABAP Editor

Where are the buttons gone of File upload and Download in New ABAP Editor in ECC 6.0.
Or some new utility added for this feature.
Kindly guide.
Thanks,
pradeep

Go to Utilities>more Utilities>upload/download is there.
Amresh.

Where are the tutorial exercise files?

Where are the exercise files referred to in the photoshop tutorials?

Most of the video tutorials on AdobeTV won't have excercise files to go along with the video. If they do, they'll be listed under "Show More Details" in the About This Episode section.
There are a few resources you can use if you'd like to follow tutorials with exercise files to go along with the steps.
Lynda.com is a great resource for learning Photoshop. To have full access to the learning tools you have to buy a subscription, but many of their lessons have accompanying exercise files.
http://blog.fitnyc.edu/technology/2010/11/11/exercise-files-for-lyndacom/
You might also look into Level Up for Photoshop. It's a plugin that you download and open in Photoshop that guides you through step-by-step tutorials within the actual program. All of the exercise files for Level Up are included when you download the plugin.
Hope this helps! Good luck

Why does Encore keep crashing and where are the media files?

I am having big problems with Encore right now. I have developed a rather complex DVD with something like 20 movies on it. The video files associated with these movies are all in .wmv format; about 4gb total in size and are stored on an external drive as is the Encore file with which I am authoring this DVD. This drive has a USB connection to my computer which I know is not the best but I have managed to author an earlier draft of this DVD no problem.
The problem now is that Encore keeps crashing. Also, in the process, a lot of disc space is eaten up on my "C" drive. I don't know why this is and where to go to delete these files. I have defragged my computer and my anti-virus scans are up to date. I am running a windows XP Home Edition O/S with an Intel pentium 4 CPU, 2.79 ghz with 2.5 gb of RAM. I went to edit>preferences>media>location in Encore and got that my media files are on my C drive in Adobe>library but, when I looked, they didn't seem to be there. Super frustrating! Also my computer is super-slow too. I deleted all temp files and there is no spyware to speak of, according to my virus scan software (Panda).
Does anyone have any ideas as to how to address this problem? Many thanks!
Lewis

Ah yes... CS4... if the OP is using CS4, the Roxio update is needed
Encore CS4 Roxio component problem http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
Also
Long File Names Cause Crashing http://forums.adobe.com/thread/588273
And #4 Here http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0

ICal Problem with Mobile Account/Home and where are the calendars stored

I am using MacMinis in an office with my MacPro SnowLeopard Server running LDAP with NetworkHome accounts. Almost everything works except this ical is driving me nuts.
The problem is iCals don't sync with the NetworkHome. When I look in usr/library/calendars a new calendar appears there but it won't sync on to a different machine.
What is even more frusterating, if I disconnect the server so I am just logging in locally, I can delete all the calanders in usr/library/calendars, but when I log back in the calendars just re-appear. So where else is ical storing calendar information?
thanks
jake

where else is ical storing calendar information?
in a folder in usr/library/syncservices/local. You will have to look in the clientname.txt file in each of the folders to find which one is for iCal.
AK

I can't hear the narration track over the audio, what do I do? And where is the "audio mixer"?

Just downloaded Premiere Elements 12 and lost my favorite audio music (wish I could bring it over from 11 somehow), so I drug a new clip in the audio track and now I can't hear my narration track. Also, can you pull up projects made in 11 with Premiere 12? Should I delete 11 off my computer? Also, where is the audio mixer?

The Audio Mixer is under the Tools menu in Expert view or under the Tools drop-down menu at the top of the interface.

Where Are The Captured Video Files Typically Saved?

Hi:
I guess my title pretty much descibes my question, I feel like a bit of an idiot, but for the life of me I can't find them on my drive!
This iMovie is like a virus! Also, what does one do to delete all related files once the movie has been written to DVD and I don't need them anymore?
Thank you, Glenn

They are saved where YOU told iMovie to save them when you created your projects. iMovie suggests your "Movies" folder, but you may (of course) navigate around the hard drive(s) and save them anywhere.
I would at LEAST export the project back to tape before deleting it. To delete, use Finder to drag the "package" (which looks like a file) to the trash and empty the trash.

Where are the auto recovery files stored for Visio 2010?

I have auto recovery set for every 5 minutes. I have been working on a file that has been saved several times a day. Today when just moving a shape Viso 2010 crashed after I had been working on the file for over 2 hours. Auto recovery popped
up every 5 minutes indicating it was saving the file. After the crash the ony file I could find was the file as it was when I first opened it this AM. None of the work done today was saved.
Did auto recovery completely fail? Where can I look for the auto recovery file?
I have not done a reboot because I am afraid that if the file exits it will be gone for sure if I reboot. Any suggestions are welcome.
There must be a temp file or something that I can look for but not sure what the extension would be or the location.
Hopefully someone here can help.
thanks,
greg
Greg J Wilson

How do I know? You state the the auto-save file extension is .vxd - that's the Visio document XML format.
You can change this in File -> Options -> Save
As for the crashes, are there any messages when a crash occurs?
Check that the video drivers you have are the latest, try a different screen resolution to see if that changes anything and turn off or change any screen accelerators.
-- Paul Herber, Sandrila Ltd. http://www.sandrila.co.uk/ Engineering and software shapes for Visio.
My mistake - the file format is .vsd - standard visio format
Here is the info from the event viewer for the specific crash that caused me temporary pain.
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider
Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated
SystemTime="2011-07-25T17:15:25.000000000Z" />
<EventRecordID>83552</EventRecordID>
<Channel>Application</Channel>
<Computer>gw-Tosh_laptop</Computer>
<Security
/>
</System>
<EventData>
<Data>VISIO.EXE</Data>
<Data>14.0.6022.1000</Data>
<Data>4d6eacd6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>8469f91f</Data>
<Data>1668</Data>
<Data>01cc4ae02611b81c</Data>
<Data>C:\Program
Files\Microsoft Office\Office14\VISIO.EXE</Data>
<Data>unknown</Data>
<Data>af70a4ff-b6e1-11e0-82fc-001e33913568</Data>
</EventData>
</Event>
Greg J Wilson

What dll do I use and where are the .h include files?

Similar Messages

Maybe you are looking for