What DNS server is that in the window.. 65.254.254.102

So. I have 1 DNS server, 1 DC, 1 GC etc. One.
It essentially is a lightweight network only serving a few PCs. Strangely it is getting these events for a DNS that doesn't exist.
The dynamic registration of the DNS record '_ldap._tcp.pdc._msdcs.araroprinting.com. 600 IN SRV 0 100 389 AGPYYC-SVR-003.araroprinting.com.' failed on the following DNS server:
DNS server IP address: 65.254.254.102
Returned Response Code (RCODE): 5
Returned Status Code: 9017
For computers and users to locate this domain controller, this record must be registered in DNS.
USER ACTION
Determine what might have caused this failure, resolve the problem, and initiate registration of the DNS records by the domain controller. To determine what might have caused this failure, run DCDiag.exe. To learn more about DCDiag.exe, see Help and Support
Center. To initiate registration of the DNS records by this domain controller, run 'nltest.exe /dsregdns' from the command prompt on the domain controller or restart Net Logon service.
Or, you can manually add this record to DNS, but it is not recommended.
ADDITIONAL DATA
Error Value: DNS bad key.
I have looked this up and down all over and can't seem to find a) an answer that work and b) the DNS entry anywhere in the server. So what gives? I read through this conversation and it's almost identical. There is no old domains anywhere and I have run
through all the suggestions. Anyone have some insight?
-Jake

Hi,
You may try to restart NetLogon service on DC, in order to re-register related DNS record. Open CMD and type each line and end with Enter:
Net stop netlogon
Net start netlogon
Check your DNS server and to see if the record is listed.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

How can I determine what dns server the wifi client use within airport

How can I determine what dns server the wifi client use within airport
I want to use dns servers other then the one that airport extreme is using. For example I got the 172.16.1.1 (the default gateway - airport extreme), but I want to use the office dns servers, that are in a 10.x.x.x range.
Is there a possibility?
Thanks and happy eastern

The Airport Extreme uses the DNS servers assigned by the network that it connects to. Is you Airport Extreme on the 10.x.x.x network? if it is then you are already using the 10.x.x.x DNS servers. Check your Airport Extreme with the Airport Utility and you will see in the Internet tab, the DNS servers used. The devices connecting to the Airport Extreme are assigned a DNS address of the Airport Extremes IP, In your case 172.16.1.1 but all DNS searches and resolution are done with the DNS servers you see in the Airport Extreme.
If you want to use some other DNS then you can override in the Airport Extreme which will be used by all devices connecting too the Airport Extreme, Or you can edit the DNS address in each devices wireless settings.

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can i see the choices at the bottom of that window?

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can I see the choices at the bottom of that window?

I tried to send it through gmail and the acct is a POP acct
I'm not concerned about sending to the long address list. I just can't get the email and window that says "cannot send emai using the server..." to go away. The default must be "retry", because although I cannot see the choices at the bottom of the window if I hit return it trys again... and then of course comes back with the very long pop up window that I cannot see the bottom of so I can tell it to quit trying...

Windows server 2012 standard second DNS server not automaticly detected by Windows 7.

Hi!
We have configured a second DNS server on our domain just in case.
I have tested the second DNS by activating manually the second dns server in the IPV4 config in windows 7 pro.
My question is: the second DNS server is not supposed to be detected automaticly by windows?
Thanks you.

Hi,
There may be some misunderstanding about how DNS works.
DNS client doesn't detect DNS servers. DNS client doesn't know which zone is hosted by the DNS server. DNS client can only send DNS query to the DNS servers which are configured in the client.
As I mentioned above, the DNS Client service queries the DNS servers in the following order:
The DNS Client service sends the name query to the first DNS server on the preferred adapter’s list of DNS servers and waits one second for a response.
If the DNS Client service does not receive a response from the first DNS server within one second, it sends the name query to the first DNS servers on all adapters that are still under consideration and waits two seconds for a response.
If the DNS Client service does not receive a response from any DNS server within two seconds, the DNS Client service sends the query to all DNS servers on all adapters that are still under consideration and waits another two seconds for a response.
If the DNS Client service still does not receive a response from any DNS server, it sends the name query to all DNS servers on all adapters that are still under consideration and waits four seconds for a response.
If it the DNS Client service does not receive a response from any DNS server, the DNS client sends the query to all DNS servers on all adapters that are still under consideration and waits eight seconds for a response.
In your case, if you configure the DNS2 as the secondary DNS server on Windows 7, when the DNS1 is down, Windows 7 will send DNS query to DNS2 after 3 sceconds(Step 3).
Best Regards.
Steven Lee
TechNet Community Support

Should my DNS server be talking to the internet?

I have the DNS service running on my OSX server in order to use Open Directory and server-based home folders. To use these server-based home folders I have to put the IP address of the server in the "DNS Server" entry on all the machines in Network Preferences.
Because the workstations here would seem to be going to the file server for DNS, do I need to open ports on my router or something so that the server can provide this info? I'm having some weird email issues with emails not arriving in a timely manner (inter-office via the internet, some arrive days late) and slow response times in Safari (page takes a while to start loading, and then loads very quickly once server found) so I'm wondering if this is what's causing it.
Any hints appreciated. Thanks!

If you only use your own DNS on both server and LAN clients (you should with your setup of using the same domainname internally - a bit "ugly" but it works) you need to also setup any external services IP numbers such as any mail and web servers (and others).
It wasn't me who set it up like this, but I'm stuck with it! What do you mean when you say to "setup any external services IP numbers"? DO you mean I need to tell the server where to find the mail server so that it finds it more easily? Where do I put them? And would it just be the mail server address, i.e. I assume I don't need to put in every website we want to access? No, that would be silly... but then... who knows.
I would add forwarders (your ISP DNSes) to /etc/named.conf and turn off IPv6.
In theory I know about these unix style text files, but do I need to be logged in as root to see them? I can't see the /etc directory and searching for named.conf brings up nothing. Also, I turned off IPv6 on the server and shortly after someone with a server based home folder got a message sayiing that they'd lost connection to all the mounted volumes on that server with "disconnect all". Turning IPv6 back on made that message go away so I don't want to play with that again for the time being!
Is there a way to set these things up without resorting to editing text files? I'm an old-skool mac user and so it's a bit scary. I should have made that clear from the beginning. Thanks!

Two questions: how do Skype and iChat compare for group video? quality, reliability, cost, etc are important. 2) Is my MobileMe ID what I need to use in the window in making an iChat buddy? It only says AIM above the window, online tutorial differs.

Two questions: 1) How do Skype and iChat compare for group video? Quality, reliability, cost, etc are important. 2) Is my MobileMe ID what I need to input in the window in making an iChat buddy? It only says AIM above the window, online tutorial differs, saying MobileMe, AIM, GoogleTalk (Jabber) all work. Thnx

Hi,
IChat uses better Video Compression than Skype does.
On a top flight Mac you can send a 640 X 480 pixel frame up to 30 frames a sec.
Skype can't match this.
iChat in Video is Peer to Peer. (you can actually Log out of the Buddy list)
Skype seems to borrow something from everyone's bandwidth to make connections.
What do you mean by Business account Tracking ?
iChat Adds (or can add) the First Name, Last Name of your Buddies and create an Address Book Entry
Whether you mark those cards connected with a company is up to you.
(I have heard of issues with earlier version of iChat and the Address Book that "saw" the Company Name as the part of the Name and linking several Screen Names to the one name
Audio on a Mac using Skype tend to be the same as the streaming needs are less.
However you have to rely on any PCs audio abilities from PCs which may not be to the same standard.
Mac to PCs in iChat and AIM can be difficult though. (It should work but it rarely as simple as Plug and go)
Skype may suit your needs better on ocassions.
9:11 PM Thursday; May 5, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
, Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

TS3804 "io6" I am unable to save a photo from another app (for example FACEBOOK) to the Camera Roll. I press & hold the photo, the window indicates "Save Photo" comes up, I press that option & the window goes away but the photo is not in Camera Roll.

IPHONE 4 + "io6". I am unable to save a photo from another app (for example FACEBOOK) to the Camera Roll. I press & hold photo, window indicates "Save Photo" comes up, I press that option & the window goes away but the photo is not in Camera Roll. Please advice...

Steve750717 did yu notice that the post is 6 months old?

Content Server crawler that mirrors the structure

Is it possible to crawl section(s) of Content Server so that it mirrors the folder structure of the content server section, creates documents for all File Content Items and maps the security of the content items to documents?

Hi,
According to your post, my understanding is that you got error when communicating to the server.
This happens when crawler is not able to connect to the server. Make sure server name is correct. Couple of steps to troubleshoot it
You should be able to ping the server from the server having crawl component. Make sure there is an entry for the server in the host file under c:\Windows\System32\drivers\etc folder.
Ping <servername>
2. You should be able to connect to the server using telnet command
Telnet< servername> <port number>
More information:
Troubleshooting of FAST Search Configuration
If the issue still exists, you can delete the old search application and recreate from the beginning.
You can also reset the index and do a full crawl after.
Here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/en-US/f3c61b53-304a-4c2a-a370-d0e573219d1d/an-unrecognized-http-response-was-received-when-attempting-to-crawl-this-item?forum=sharepointadminprevious
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Installing Office 365 on a different hard drive to that of the windows installation

Hi Guys,
I have an office 365 account and was using it succesfully on my pre-installed windows 8. My PC crashed and I re-installed windows 7 on it. I put the windows installation on my 20gb SSD and, as you have guessed, there is very little space left over on it
for anything else.
I do understand the technology around the installer etc when you download from office365.com, but is there no way to work/get around this problem and install it to my 500gb HDD?
Any help would be greatly appreciated as I need my office back up and running for business.

Alright CharlieWright I think I have a solution to this problem!
It's weird, and it's kind of hacked together, but it seems to be working. Use this solution at your own risk, I have it working and i'm quite happy with it. With this solution windows basically *thinks* office is where it's supposed to be (C:) but it's not
there, instead there's an automatic pointer to where it actually is (your other storage device). It's called a junction.. hence the /J later.. anyway, here's what I did:
1. Create a backup of everything in case this breaks your device. It shouldn't, but you never know.
2. Download and install LockHunter (lockhunter.com), it's a software I used to simplify the process. Without LockHunter you'll have to manually end process on everything that keeps you from accessing the office directory.
3. Empty your recycle bin.
4. Find every directory that office references, I only had one, some people have 2, I don't know if there are ever 3. They're commonly found at:
C:\Program Files\Microsoft Office 15
C:\Program Files (x86)\Microsoft Office
5. Run CMD Prompt as administrator
6. For each Directory:
- right click it (ie Microsoft Office 15 folder) and select "what is locking this folder?"
- unlock it and navigate back to that directory.
- delete the directory (send it to your recycle bin to relax)
- in the cmd prompt type: MKLINK /J "Full original directory" "Desired destination directory"
for example:
MKLINK /J "C:\Program Files\Microsoft Office 15" "D:\Program Files\Microsoft Office 15"
MKLINK /J "C:\Program Files (x86)\Microsoft Office" "D:\Program Files (x86)\Microsoft Office"
7. Create the destination directories manually.
8. Test the junction, if you did everything right, when you navigate to the original directory it will look like a shortcut folder and clicking it will look as if you're still on the C drive but you're not, you are actually in the destination directory. If
you did something wrong you'll get an error.
9. Open your recycle bin, click the directory and click restore

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and somehow it crashes the mac side peridoically. I am told I need to "clean" it and reinstall lion using the recovery drive. will that delete the windows partition too??

I have a mac book pro with Boot Camp that also runs windows. I upgraded to Lion and now the mac side crashes/freezes periodically, especially iphoto. I am told by the genius' that I probably need to "clean" it and reinstall lion using the "recovery drive" which resets everything back to default and reinstalls the lion operating system. My question is will this also delete the "windows" partition drive and all that data too. If so that will be a huge pain in the ___ to back up and reinstall boot camp and windows. I want to shoot the lion.

There is no system like Acronis for the Mac platform. You can try using the buiilt in Disk Utility to create an Image of the complete Mac drive but I have found that this does not work very well as on tryiing to restore it gives errors sometimes.
You can use SuperDuper or Carbon Copy Cloner to create a bootable Clone of your system partition. But that is only for the System partition and not the complete drive.
If you use Boot Camp to install Windows on your Mac neither of those two programs will clone the Windows side.
Neither will Disk utility as Mac's can not create or write to a NTFS partition. So some other program is need for that.

Make a menu item that changes the window

Since I am always changing the interface of Brandsonic Web, I would like to make a menu item that would allow the user to change the window to a window they like. The structure of the app is I have 3 different windows objects and I would like a way to change between them with a menu item choice. How do I go about doing this? Thanks!

Click on the Menu bar and go to View . Or, hover over where the Menu bar shiuld be and click on it when it appears. Try quitting and relaunching Finder.

'dns' server failed to upgrade the Network Registrar configuration databases!!!

I have problem with installation the Network Registrar 7.2. According to the install log: "The 'dhcp' server failed to upgrade the Network Registrar configuration databases !!! See C:\NetworkRegistrar\Local\temp/dhcp_upgrade_status_log for details." The dhcp_upgrade_status_log is not found on my PC.
Do somebody familar with such problem?
Thank in advance.

Hi Dave,
Any luck on this thread? Where you able to find a work around on this problem? I am encountering also the same problem thou my OCR and Voting Disk are on raw partition.
I have done clean-up using the "dd" command and re-install CRS a couple of times and still with no luck...
Hope RAC gurus can help us on this.
Any help would be much appreciated.
Thanks!

How can i download movies from a website that use the windows media extention it specifically sends the media through the windows media extension

'''there is a website i visit frequently and i have tried all the downloader extensions how do i download the movie from the sight if it uses windows media extension'''

Thanks for the excellent advice, all! I started with BitPim, and have hit a bit of a deadend with the application not being able to detect the phone - I can manually set the port location to the phone (and it shows up as an LG device), but then get a "false" and no connection. So I suspect that's something on the phone end blocking access from a computer via USB... I'll dig around on that a bit.
Thanks, also, for the suggestion to buy a BlueTooth adapter - that's my next step in this... although after reading the link/review about Verizon's attitude toward open file transfer, I may be severing my ties with them. I've been happy with the phone service, but this is really annoying.
This is what happens when you assume that Mac people exist in the rest of the corporate sphere..! To think that I would assume that a phone/camera with a USB cable would actually be capable of connecting to a computer and transferring files!
Thanks, again!
Tom

App Server Problem Logging off the Windows User...

I installed the AppServer 9PE on a Windows 2003 machine as a service...usually I access the machine using Remote Desktop (to avoid CED freezing), the problem is that when I logoff the user to disconnect the RD session...the java.exe launched by the appserver service hangup...
Is there a solution to avoid it?
Thx

No one have any idea?

I frequently have to re-setup my laptop for Firefox Sync - what am I doing that removes the registration?

I periodically run CCleaner and I am guessing it is removing something that is required for Firefox Sync. If I knew what it was, I would stop doing it.

The ''saved passwords'' cleaning options in ccleaner clears your Firefox sync account.

What DNS server is that in the window.. 65.254.254.102

Similar Messages

Maybe you are looking for