What do 802.1 p priority settings in Actiontec MI424-WR do?

We are having some throughput issues with devices connected wirelessly to our Verizon supplied Actiontec MI424-WR router. I noticed a page in the router's advanced settings with a bunch of priority settings. I have never touched them. They are numbered 0-7; 0-3 are set to low, 4 & 5 are set to medium, and 6 & 7 are set to high. Does anyone know what they do?

cdrinkard's summary is very good. 802.1p has to do with preferences for how packets are delivered (quality of service) and traffic shaping, not wireless standards.
One caveat you should remember - if you turn on 802.1p you'll probably only get much benefit if all of your other switches on the network also support it. Think of it like a "tag" that is attached to the packets that fit the criteria you set.
It can make some difference with how your router manages its internal queues of packets, but where it really comes in handy are environments where the whole LAN is busy and you need to make sure that certain services or hosts don't experience a lot of delay (latency) or jitter (variability of latency).
If you have other switches, they need to be able to read the tag on the packet as well, otherwise all of your packets get tossed back into the same bucket. Do NOT just set everything you find to the highest number and expect that to make a difference - you'll just be back where you started. The whole point is to differentiate services from each other. Just remember that you can't ever add to more than 100%.

Similar Messages

HT3228 When I try to send an email from my Iphone it will not send and tells me the recepient will not allow relaying. The email will sit in my outbox and then at some point will send. It sometimes takes days. What is wrong with my settings?

When I try to send an email either new, or reply on my phone I receive a notification that recepient will not allow relaying. The email will then sit in my outbox. At some point it will send but it is hardly dependable. What is wrong with my settings?

The collum to the right listed similar problems. The solution appears to be that under smtp outgoing settings the user name and password are listed as optional. I have not plugged in the information and it seems to be working. However from my office it always allowed the relaying. The true test will be when I try to respond later from the road.
Thank you for your help.

CS3 - What Are the Best Export Settings for Animation?

I have edited a project in Premiere Pro CS3. It is animated, and I want to preserve as much of the quality of the animation as I can.
What are the best possible settings that I can use to export the video to a .MOV file?
A little background info, in case it helps:
The animations were created in After Effects, and the .MOV files were made with the Animation codec.
After editing in Premiere, I exported the finished file to the Animation codec. It looks so-so.
Important: I imported the Premiere Project into After Effects, and exported the project with After Effects. The After Effects Quicktime file looks better than the Premiere version of the Quicktime file. (And has a higher data rate, in case that matters.)
What kind of settings do I need to select in Premiere when I export the video to make the .MOV file look as good as it can?
(And please don't be afraid to dumb it down.)
Thx!

Try an Uncompressed "QT" file. (Component YUV - 10-bit)
BTW: Did your PPRO Settings match the AEFX Comp you exported from?

What are the best export settings to use...

Operating system: Vista SP1
Camera: Canon HF100 (1900x1080 HD quality 29.97fps) -- uses AVCHD compression which is H.264 I believe.
I'm able to watch my camera video files in Vista nicely. However, I'm having trouble with the watching the results of my edited and exported videos. Assuming I want the same quality and playability as the source video, what settings should I use in the export?
In the export settings window... I select:
Format: H.264
Preset: HDTV 1080p 29.97 High Quality
Source files have the extension: .m2ts
...I don't change the other values. Then I export. Now the result is an .mp4 file which does not play in Windows Media Player. It does play in Quicktime or iTunes however it plays jerkily... I would like to be able to play it as smoothly as the original source plays... And I'd like to be able to play it in windows media player just as the source can be played in media player. Media player seems to play the source more smoothly than does iTunes or Quicktime.
So what are the best export settings for me so that I can watch my edited HD video on my computer as easily as the source footage???
I've been able to edit and save the results of the edit using the crappy ImageMixer3 video editor that comes with the camera. The results are perfect and play in windows media fine. The files it exports the edited video as is the same as the soure... the file extension is .m2ts
So the problem is how to get Adobe to export the edited video to an .m2ts file or at least to a file type that plays as nicely in my system?

See
Exporting to iPods, cell phones, PSPs and other mobile devices in the PPro Help for details.
Cheers
Eddie
PremiereProPedia
RSS feed)
- Over 350 frequently answered questions
- Over 300 free tutorials
- Maintained by editors like
you
Forum FAQ

What are the best import settings for iTunes - AAC 160 / AAC 192 / MP3??

Hi I originally imported all my treasured CDs to iTunes several years ago, and they've served me well (AAC 128 - default setting) but in recent times hard-drive sizes have trebled and my much loved iTunes Library has not been updated.
I am thinking of re-importing all of my original CDs - as I think now that hard-drive space would allow for a higher quality but at the same time I do not want to fill my hard-drive completely with music - hence my question;
WHAT ARE THE BEST IMPORT SETTINGS CONSIDERING SIZE AND QUALITY?
(I know this has probably been asked a million times, but I did a search and nothing came up that answered my Q - also all the answers that came up in Google search where dated 2003/ 2004 - a little out-dated me thinks!!)
Rachael

Personally I've started ripping everything Apple Lossless. That way I hope I never have to rip again.
I used to rip 320 mp3. I couldn't tell the difference between 320 mp3 and lossless, but, one day I might be able to - big maybe. But since disk price is not likely to go up, I figured I'd rip lossless from now on "just in case."
Probably few, if any, people could tell the difference between 256 AAC and lossless (I've done it at 192, but never at 256, and I have not bothered trying again recently - there might be a song out there where I could hear the difference, hence ripping lossless from now on - my time costs more than disk space . . .)
256 AAC is a pretty safe bet, unless you need mp3 compatibility, then use 256 (or 320) mp3.

Just got an Ipad and am working on setting it up. the one issue I am having with it is my screen will not rotate no matter what I do to the settings, I can't figure out if the settings are wrong or if there really is something wrong with my Ipad.

just got an Ipad and am working on setting it up. the one issue I am having with it is my screen will not rotate no matter what I do to the settings, I can't figure out if I have a setting wrong or if there really is something wrong with my Ipad. any help would be greatly appreciated.

Double click the home button (square) and all the things you did are there.keep sliding the bar that will come up on the bottom to the left till it cant go anymore there should be a icon looking like this.press that and it should work
Good luck hope it works.

What is the best format & settings to edit video in FCP?

My organization uses a HD Panasonic Camera to record video, which is recorded in .MTS. Our editing software (FCP 7) is installed on a Mac and I am unable to view or edit the original video until I convert it into a different format using iSkysoft iMedia Converter. Recently I have been converting it into what I think is similar settings to the original file (.MOV, Xvid, 1280x720, 30 fps, 1200 kbps). Are these settings appropriate for editing video? If not, could you please offer advice as to what settings I should convert the video into.
Thank you for your help.
(This post is relative to a similar question I asked earlier today, but this post is for future reference so I start projects on the right foot).

WHich Panasonic HD camera. MTS means that it is an AVCHD camera. And no, you can't edit those directly, but FCP has an import tool for tapeless media called LOG AND TRANSFER (in the FILE menu). You use that to import the footage from that camera. It will convert the footage to ProRes or Apple INtermediate codec. THOSE are the formats you need to convert to. What is found in the EASY SETUP list. Not just any QT will work...not every QT format is editable.
What you need to do is backup the entire SD card to a drive, or import from the SD card. But the full card structure needs to be present in order for FCP to do this.
If Log and Transfer doesn't work, then you use CLIPWRAP to convert to ProRes.
Shane

What are the best export settings for a HD video in Premier Pro CS4?

Hi!
   I've been having so much trouble with this issue and it's something that continually frustrates my boss. I have a HD video the settings for it are
FPS 23.98
1920 x 1080, then a few lines down it says 1408 x 792
16 bit,
2 channels
48000 Hz
   What should the settings be when I make a new sequence?
             When I look at it in the window in Premiere Pro I have to contantly 'shrink' the image to fit the window, is that something I should be doing or does it indicate the sequence settings are incorrect?
But more importantly what should the export settings be? I exported a 4 minute long video and the size was 1 GB, I know that's too big.
I need to export it without loosing any quality and export another one that meets the Youtube and Vimeo limits on size.
Vimeo is 500 MB per week, sometimes I upload 4 videos per week. I think Youtube you can only upload 500 MB at a time.
I need to get smaller sizes with loosing the least amount of quality possible AND the best export settings for quality, so I guess I have 3 separate questions-
What are the best sequence settings for HD video?
What are the best export settings for HD without loosing any quality?
What are the best export settings for the size to come out around 500 MB with loosing the least amount of quality possible?
Thank You!
http://forums.adobe.com/thread/713070
On the above thread I used the 5th anwer, and it's going to take about 7 hours to export a 4 minute video :/

It Stands for "Coder Decoder."
Your format is like a container for your video file. Certain containers can hold certain codecs and not others. Other containers can hold other codecs. Sometimes different containers can hold the same codecs.
This might be a bad analogy but I'll give it a try.
A coffe cup (container) can hold pretty much any liquid you drink, where a red solo cup (container) won't hold scolding water. So, the coffe cup would be your container of choice most likely because it has the most options for liquids (codecs). But, you might want a red solo cup for just a single crappy beer at a party (a moderate quality streaming video on the web). In that case, you don't need all the optoins of another container.
In Premiere Pro CC H.264 is a Container and the Codec in one option. This has been streamlined for web distrobution of video to be played in browsers without things like Flash or special players.
Were as if you choose the QuickTime Container there are over 40 codec optoins (at least on my machine with additinal ones installed) but you may run into an issue where your browser doesn't support QuickTime playback.
I would say that your container is for compatability with players and your codec is taken into consideration when looking at the quality of the compression.
Yesteraday I wrote a blog entery on Exporting from Premiere Pro and found that the MPEG-4 codec inside of the QuickTime container gave me much richer colors than the H.264 container/codec option.
I posted the link before but here it is:
http://goo.gl/8GZq4i

What are the proper print settings to print two sides, landscape and bind on the short side?

what are the proper print settings to print two sides, landscape and bind on the short side?

This is a question best asked in the appropriate product forum.

What is the default time settings in Process chains

Hi,
What is the default time settings in Process chains.
How to set time settings for daily,weekly,monthly loads in Process chains.
What is the time settings that we have to take care when creating meta chains.
Thanks,
Madhu.

Hi Madhu,
The Time settings for any PC is done in the start variant of the PC. There is nothing like default time setting. These settings are totally depended on the requirement and system performance. It is a general rule of thumb to load the data during a time when the user activity is minimum as the loading process is going to occupy many dialog as well as background WPs. So, if you schedule them at a time when there are many users on the system, they might feel that the system is slow. Hence, you decide as to what is the best time for scheduling a PC. The same applies to meta chain also. In case of meta chains, you make sure the dependencies of the local chains is also handled. Hope this helps.
Thanks and Regards
Subray Hegde

What's the best security settings for publishing PDFs on the web while considering SEO still works

I want to protect my PDFs from people editing them and publishing them under their names, but I also want search engines to be able to scan it properly for SEO purposes. What's the best security settings to use for the PDF to accomplish both?
Thanks

I am currently using WD 2TB Thunderbolt hard drive for my iTunes, which i love and is works great. i am connected directly to my Mac Book Pro. I am running low on Memory and thinking of buying a bigger Hard drive. My question is should I buy 6TB thunderbolt HD or 6TB NAS drive to work solely for iTunes. I have home sharing enabled for my Apple TV
I also have my time capsule connected just as back up only.

What to adjust in the settings of ipadmini in order that there will be a screen rotation

what to adjust in the settings of ipadmini in order that the screen will be rotated?

Set the Side Switch
Use the Side Switch to Lock/Unlock Rotation.

What are the report-relevant settings in the hierarchy maintenance?

What are the report-relevant settings in the hierarchy maintenance?

Hi,
See these links.
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
assign points if this helps.
Thanks.....................
vasu...................

What is wrong with camera settings -can't get it out of X-ray view

What is wrong with camera settings -can't get it out of X-ray view

It sounds like you are using Photo Booth and not the actual camera app. If you are using Photo Booth - tap the little icon in the lower left corner of the app to return to all of the different effects. Or quit Photo Booth and launch the camera app.
To quit Photo Booth...
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.

What happened to date priority in menu listing?

What happened to date priority in menu listing? I used to decide and select items via date in an "Open" menu, but now that function seems to have been removed in Mavericks.
How do I get it back?

Go to "Show All Bookmarks"

What do 802.1 p priority settings in Actiontec MI424-WR do?

Similar Messages

Maybe you are looking for