What do calls actually cost on SKYPE connect? .80...

It says the basic charge for calls is .8 cents a minute.  Then it says you can buy a 5000 minute bundle for $30.  That makes no sense.  .8 cents a minute is .80 EIGHTY CENTS a minute.  That would mean 5000 minutes at 80 cents would be $400.
Then it gives an example of 30,000 minutes costing $171.  or .57 cents per minute if you used all 30,000 minutes.  Again this makes no sense what so ever.  30,000 minutes at .57 cents is $17,100.
Could it be that what you meant to say is that calls are billed at .08 cents?  or .057 cents?
This would make more sense.  I am certainly not signing up for something that costs 80 cents a minute.  I would think that a company as large as SKYPE would know enough not to make such stupid representations as .57 cents vs. .057 cents.  So which is it?
Also if I only want to use SKYPE connect on 1 line for outbound calls only, do I need an inbound phone number?
I want to use an automated dialer with a taped message.  I am a dentist, and I have over 7500 patients.  I need to advise all of them that I have moved my office location, and I just can't make 7500 calls by hand.
Thank you!
Doc

You need to revisit your English.    
If it said .8 of a cent, that would make sense.  Because .8 of a CENT that would be 8/10ths of a single penny or 80% of a penny or .8.  However .8 CENTS, plural is 80 CENTS!  
You even said, "eight tenths of a cent per minute."  You did't say, "eight tenths of a CENTS per minute" did you?
You can't call 1 PENNY, "CENTS" that is the plural of CENT indicating you are talking about more than 1 penny.  You don't say, "I only have 1 cents."  You don't say, "I only have 1 pennys."  You say I only have 1 cent, I only have 1 penny, but tomorrow I will have 2 cents.
I have a PhD, but you don't need one for simple English.  
The information is written poorly.
DocLasVegas

Similar Messages

  • What is the actual cost of SAP original Software?

    hi experts
    <b>What is the actual cost of SAP original Software to implement in one software company.</b>
    thanks in advnace

    Between $1 and $100,000,000.
    Lots of variables... yearly licensing fees or full purchase, R/3 or complete NetWeaver suite, single user or multi-user, several levels of support or no support, implementation partner expenses, types of hardware, etc....
    EDIT:
    I just noticed you said "one software company".  There are other options if you want to be a "partner".  It is one thing to use the software to run your company, it is another if you want the software because your company wants to develop add-ons.
    Message was edited by: Norman Salter

  • What is the actual cost of these plans?

    What is the actual cost of these plans?
    * $59.99 a month for 450 minutes
    * $79.99 a month for 900 minutes
    * $99.99 a month for 1,350 minutes
    Although they will very, Answers welcome from anyone in the USA. So I can have and idea of the cost with taxes and fees. I am located in both LA and NYC. I currently have a NYC number with Verizion using the 450 minutes plan. The plan cost $39.99 before taxes and fees and $48.42 after taxes and fees.
    Breakdown of Monthly Access Charges:
    450 minute plan: $39.99
    Verizon Wireless' Surcharges and Other Charges & Credits: $3.31
    Taxes, Governmental Surcharges & Fees: $5.12
    Total Current Charges: *$48.42*

    My plan total is $84.99/month, then with taxes and fees it comes to $93.40 each month as the total bill. The biggest fee is the state sales tax, at just over $5 on my last bill. Then the 911 fees, fed regulatory fees, and all that are a few bucks each.
    My plan -
    450 Minute (required) $39.99
    Unlimited Data (required) $30
    1500 Text msgs (optional) $15
    Total = $84.99

  • What can I actually to with database connections?

    This may sound like an odd question, but once I define a MySQL connection in Dreamweaver, what can I actually do with it? Let me clarify what I'm doing:
    I've only just found out that we can define MySQL connections when a PHP/MySQL site is defined. I'm used to administering my databases via MySequel or phpMyAdmin. Accessing databases in Dreamweaver would rock!
    So now I've got a connection, I can read all my tables... but I can't seem to do anything with them. I can't add data, I can't modify data - all I can do is look at what's already there. I can click the "insert code" or the "view data" option, but they don't seem to do anything useful: The first option only pastes whatever is highlighted in my code, and the second brings up a window displaying the data.
    What am I missing? Can I change the data somehow and just haven't found the option yet? Or what else can I use my database for?
    For example, exporting or importing data, synchronising with another database/database host, etc?

    Database connections are used to develop data driven web sites. So if you are familiar with server side scripting you can write code to make your site dynamic. In the past, DW had server behaviors that streamlined the process of creating web forms and display areas to insert, update and select from database tables, but these have been removed as the code was never quite up to current standards.

  • Actual Cost & Actual Revenue

    Dear Sir,
    Can you please tell me what Actual Cost & Actual Revenue & also what is difference between Actual cost & Actual Revenue.
    Regards,
    Gagandeep Singh.

    Hi,
    IN any project you incur some expenses and at the same time when you sell something you generate revenue. But in the intitial stages you cant say what is the actual cost that you are going to incur or what is the actual revenue you are going to generate at a certain point/phase in a project.
    Actual Cost refers to for eg. suppose you procure a bearing for your project. You will create a PR and then a PO. Until this stage system will treat this as a commitment. Once you do the GR/ GI this cost is converted to actual cost. Similarly lets say that you are building a ship and you have procured some components to build that ship. That procurement will lead to a cost because you are incurring some expenditures. Once you build that ship and sell it and bill the customer you will generate revenue. Till the time you receive the payment/revenue from your customer system treats this as Planned revenue. Once you bill your customer and receive the payment system will treat this is as the actual revenue.
    So basically Actual Cost refers to the expenditures incurred in carrying out a project and Actual revenue refers to the income generated after billing the customer and receiving the payment for the goods sold.
    Its just a basic explanation but hope this clears your query.
    Best Regards,
    Gokul

  • Skype Connect & Unlimited Call Plans

    We are currently using Elastix (Asterisk based) to receive and make calls in our office.  Since we are already using Skype on our laptops, it would make sense to use Skype in the office as well.  However, as a startup company with minimum needs, we need to keep an eye on cost.
    I already browsed through the forum and it appears that people are using Skype with Elastix successfully, but what about the calling plans?  Can we just sign up for Skype Connect and link to an unlimited plan to make outgoing calls?  I am guessing that we would require one plan per channel?
    I saw the call limitations for the unlimited calling plans, but we would never exceed the listed totals.
    Thanks!

    Synaesthesia wrote:
    With a Skype Connect SIP channel subscription and Cisco SPA504g, am I able to use my Unlimited World calling plan for outgoing calls, or am I forced to use the standard Skype calling rates for outgoing calls, or is another entirely different option possible?
    If I am forced to use the standard Skype calling rates, does that mean 4.5¢1/min for Johannesburg, South Africa?
    Thank you.
    Unlimited world or other calling subscription available for personal accounts won't work for SIP account(Skype Connect). Calls using Skype Connect will use Skype Credits or the 5000 calling minutes to US (The only calling subscription for SIP).
    For more information, please visit this link: https://support.skype.com/en/faq/FA10253/
    Our greatest weakness lies in giving up. The most certain way to succeed is always to try just one more time.
    If you found my post useful, please give "Kudos".
    If it helped to answer your problem/question, please mark it as "Accepted Solution" so other people can find it easily.

  • My FaceTime won't connect. Every time I try to call my friend it says connecting. Then unable to connect. Or lost connection. And when I go to our FaceTime history it said "FaceTime answered on another device." What can I do to fix this problem?

    My FaceTime won't connect. Every time I try to call my friend it says connecting. Then unable to connect. Or lost connection. And when I go to our FaceTime history it said "FaceTime answered on another device." What can I do to fix this problem? We always used to FaceTime. And now all of the suddenly we can't.

    Apple has released a document which is reported to address the recent FaceTime issue.
    http://support.apple.com/kb/TS5419

  • BAPI call to actual cost of work order

    Is there a BAPI call to actual cost of work order operations in PM?
    I am looking for to read these actual cost in a PM order and populate the data to the none-SAP application.
    Any helps appreciate it.
    Tim

    I think I have just found it:
    IBAPI_ALM_ORDERCOSTS_READ
    But, thanks anyway for your quick reply and helpful tips.
    points rewarded.

  • Can't make outgoing call with Skype Connect

    I have my Asterisk PBX configured with Skype Connect using SIP with TLS and SRTP. Most of my outgoing calls go through, but sometimes I can't get call out. I was able to leave asterisk console up and collect verbose and sip debug data. Can somebody help me diagnose why my calls aren't going through?
    I've changed my external IP (I'm behind a NAT'd firewall) to 1.2.3.4 and my SIP profile's user ID to 11111111111111. and my domain name to test.com. If someone working for Skype needs that information they can email me and I'll send it privately.
    My config:
    [general]
    context=default_context
    allowguest=no
    alwaysauthreject=yes
    allowoverlap=no
    udpbindaddr=0.0.0.0
    tlsenable=yes
    tlsbinddir=0.0.0.0
    tlscertfile=/usr/local/asterisk/etc/asterisk/keys/asterisk.pem
    tlscafile=/usr/local/asterisk/etc/asterisk/keys/ca.crt
    tlscipher=ALL
    tlsclientmethod=tlsv1
    tcpenable=yes
    tcpbindaddr=0.0.0.0
    transport=udp,tcp,tls
    srvlookup=yes
    dynamic_exclude_static = yes
    buggymwi=yes
    contactpermit=192.168.1.0/24
    register => tls://111111111111111:[email protected]
    [skype]
    type=friend
    context=from-skype
    dtmfmode=rfc2833
    host=sip.skype.com
    username=11111111111111
    fromuser=11111111111111
    secret=abcd12345
    disallow=all
    allow=ulaw
    allow=alaw
    nat=yes
    fromdomain=sip.skype.com
    insecure=port,invite
    transport=tls
    srtpcapable=yes
    encryption=yes
    SIP Debugging enabled
    [2012-08-23 19:22:33] NOTICE[16552]: chan_sip.c:13465 sip_reregister: -- Re-registration for [email protected]
    > doing dnsmgr_lookup for 'sip.skype.com'
    > ast_get_srv: SRV lookup for '_sips._tcp.sip.skype.com' mapped to host 1.sip.skype.com, port 5061
    REGISTER 11 headers, 0 lines
    Reliably Transmitting (NAT) to 63.209.144.201:5061:
    REGISTER sip:sip.skype.com:5061 SIP/2.0
    Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK2726fcb8;rport
    Max-Forwards: 70
    From: <sip:[email protected]>;tag=as6edf93cf
    To: <sip:[email protected]>
    Call-ID: [email protected]
    CSeq: 32495 REGISTER
    User-Agent: Asterisk PBX 10.5.2
    Authorization: Digest username="11111111111111", realm="sip.skype.com", algorithm=MD5, uri="sip:sip.skype.com:5061", nonce="5036b5770000182c78c1d1909cfd5c74e33f033c952d240d", response="81001ceacd91b16ebb956d3c55991471"
    Expires: 120
    Contact: <sip:[email protected]:5061;transport=TLS>
    Content-Length: 0
    <--- SIP read from TLS:63.209.144.201:5061 --->
    SIP/2.0 200 OK
    From: <sip:[email protected]>;tag=as6edf93cf
    To: <sip:[email protected]>;tag=c990d13f-90f7a10d-0-55cb59a8-0
    Call-ID: [email protected]
    CSeq: 32495 REGISTER
    Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK2726fcb8;rport=50541;received=1.2.3.4
    Expires: 45
    Contact: <sip:[email protected]:5061;transport=tls>;expires=45
    Content-Length: 0
    <------------->
    --- (9 headers 0 lines) ---
    Scheduling destruction of SIP dialog '[email protected]' in 32000 ms (Method: REGISTER)
    [2012-08-23 19:22:33] NOTICE[17932]: chan_sip.c:21399 handle_response_register: Outbound Registration: Expiry for sip.skype.com is 45 sec (Scheduling reregistration in 30 s)
    <--- SIP read from UDP:192.168.1.16:5060 --->
    INVITE sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP 192.168.1.16:5060;branch=z9hG4bK-819ce62
    From: "Scott's Office" <sip:[email protected]>;tag=9961686dacab532ao0
    To: <sip:[email protected]>
    Call-ID: [email protected]
    CSeq: 101 INVITE
    Max-Forwards: 70
    Contact: "Scott's Office" <sip:[email protected]:5060>
    Expires: 240
    User-Agent: Cisco/SPA504G-7.5.2b
    Content-Length: 234
    Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER, UPDATE
    Supported: replaces
    Content-Type: application/sdp
    v=0
    o=- 88651316 88651316 IN IP4 192.168.1.16
    s=-
    c=IN IP4 192.168.1.16
    t=0 0
    m=audio 16484 RTP/AVP 0 8 101
    a=rtpmap:0 PCMU/8000
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-15
    a=ptime:30
    a=sendrecv
    <------------->
    --- (14 headers 12 lines) ---
    Sending to 192.168.1.16:5060 (NAT)
    Using INVITE request as basis request - [email protected]
    Found peer 'scott_office' for 'scott_office' from 192.168.1.16:5060
    == Using SIP RTP CoS mark 5
    Found RTP audio format 0
    Found RTP audio format 8
    Found RTP audio format 101
    Found audio description format PCMU for ID 0
    Found audio description format PCMA for ID 8
    Found audio description format telephone-event for ID 101
    Capabilities: us - (ulaw), peer - audio=(ulaw|alaw)/video=(nothing)/text=(nothing), combined - (ulaw)
    Non-codec capabilities (dtmf): us - 0x1 (telephone-event|), peer - 0x1 (telephone-event|), combined - 0x1 (telephone-event|)
    Peer audio RTP is at port 192.168.1.16:16484
    Looking for 19739928881 in home (domain asterisk.test.com)
    list_route: hop: <sip:[email protected]:5060>
    <--- Transmitting (NAT) to 192.168.1.16:5060 --->
    SIP/2.0 100 Trying
    Via: SIP/2.0/UDP 192.168.1.16:5060;branch=z9hG4bK-819ce62;received=192.168.1.16;rport=5060
    From: "Scott's Office" <sip:[email protected]>;tag=9961686dacab532ao0
    To: <sip:[email protected]>
    Call-ID: [email protected]
    CSeq: 101 INVITE
    Server: Asterisk PBX 10.5.2
    Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
    Supported: replaces, timer
    Contact: <sip:[email protected]:5060>
    Content-Length: 0
    <------------>
    -- Executing [19739928881@home:1] Dial("SIP/scott_office-000000b0", "SIP/skype/+19739928881") in new stack
    == Using SIP RTP CoS mark 5
    Audio is at 9302
    Adding codec 100003 (ulaw) to SDP
    Adding codec 100004 (alaw) to SDP
    Adding non-codec 0x1 (telephone-event) to SDP
    Reliably Transmitting (NAT) to 63.209.144.201:5061:
    INVITE sip:[email protected] SIP/2.0
    Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1c3f16ee;rport
    Max-Forwards: 70
    From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
    To: <sip:[email protected]>
    Contact: <sip:[email protected]:5061;transport=TLS>
    Call-ID: [email protected]
    CSeq: 102 INVITE
    User-Agent: Asterisk PBX 10.5.2
    Date: Thu, 23 Aug 2012 23:22:34 GMT
    Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
    Supported: replaces, timer
    Content-Type: application/sdp
    Content-Length: 370
    v=0
    o=root 1671301052 1671301052 IN IP4 192.168.1.15
    s=Asterisk PBX 10.5.2
    c=IN IP4 192.168.1.15
    t=0 0
    m=audio 9302 RTP/SAVP 0 8 101
    a=rtpmap:0 PCMU/8000
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=silenceSupp:off - - - -
    a=ptime:20
    a=sendrecv
    a=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:TRh/HeKozlBO/mmYHNTiS5KMnefVI0aRicLoDNjb
    -- Called SIP/skype/+19739928881
    <--- SIP read from TLS:63.209.144.201:5061 --->
    SIP/2.0 100 Trying
    From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
    To: <sip:[email protected]>
    Call-ID: [email protected]
    CSeq: 102 INVITE
    Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1c3f16ee;rport=50541;received=1.2.3.4
    Contact: <sip:[email protected]:5061;maddr=63.209.144.201;transport=tls>
    Content-Length: 0
    <------------->
    --- (8 headers 0 lines) ---
    <--- SIP read from TLS:63.209.144.201:5061 --->
    SIP/2.0 407 Proxy Authentication Required
    From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
    To: <sip:[email protected]>;tag=c990d13f-13c4-5036bb3b-714198b9-32d150b4
    Call-ID: [email protected]
    CSeq: 102 INVITE
    Proxy-Authenticate: Digest realm="sip.skype.com", nonce="5036bb5800012cdd3d20e5090cc200805f7d0bbd58318e9e", algorithm=MD5
    Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1c3f16ee;rport=50541;received=1.2.3.4
    Content-Length: 0
    <------------->
    --- (8 headers 0 lines) ---
    set_destination: Parsing <sip:[email protected]> for address/port to send to
    set_destination: set destination to 63.209.144.201:5060
    Transmitting (NAT) to 63.209.144.201:5061:
    ACK sip:[email protected] SIP/2.0
    Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1c3f16ee;rport
    Max-Forwards: 70
    From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
    To: <sip:[email protected]>;tag=c990d13f-13c4-5036bb3b-714198b9-32d150b4
    Contact: <sip:[email protected]:5061;transport=TLS>
    Call-ID: [email protected]
    CSeq: 102 ACK
    User-Agent: Asterisk PBX 10.5.2
    Content-Length: 0
    Audio is at 9302
    Adding codec 100003 (ulaw) to SDP
    Adding codec 100004 (alaw) to SDP
    Adding non-codec 0x1 (telephone-event) to SDP
    Reliably Transmitting (NAT) to 63.209.144.201:5061:
    INVITE sip:[email protected] SIP/2.0
    Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1b988ba5;rport
    Max-Forwards: 70
    From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
    To: <sip:[email protected]>
    Contact: <sip:[email protected]:5061;transport=TLS>
    Call-ID: [email protected]
    CSeq: 103 INVITE
    User-Agent: Asterisk PBX 10.5.2
    Proxy-Authorization: Digest username="11111111111111", realm="sip.skype.com", algorithm=MD5, uri="sip:[email protected]", nonce="5036bb5800012cdd3d20e5090cc200805f7d0bbd58318e9e", response="6efb0e37178bae868f0a1e0ddf110e3c"
    Date: Thu, 23 Aug 2012 23:22:34 GMT
    Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
    Supported: replaces, timer
    Content-Type: application/sdp
    Content-Length: 370
    v=0
    o=root 1671301052 1671301053 IN IP4 192.168.1.15
    s=Asterisk PBX 10.5.2
    c=IN IP4 192.168.1.15
    t=0 0
    m=audio 9302 RTP/SAVP 0 8 101
    a=rtpmap:0 PCMU/8000
    a=rtpmap:8 PCMA/8000
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=silenceSupp:off - - - -
    a=ptime:20
    a=sendrecv
    a=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:TRh/HeKozlBO/mmYHNTiS5KMnefVI0aRicLoDNjb
    <--- SIP read from TLS:63.209.144.201:5061 --->
    SIP/2.0 100 Trying
    From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
    To: <sip:[email protected]>;tag=c990d13f-13c4-5036bb3b-714198b9-32d150b4
    Call-ID: [email protected]
    CSeq: 103 INVITE
    Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1b988ba5;rport=50541;received=1.2.3.4
    Contact: <sip:[email protected]:5061;maddr=63.209.144.201;transport=tls>
    Content-Length: 0
    <------------->
    --- (8 headers 0 lines) ---
    Really destroying SIP dialog '[email protected]' Method: REGISTER
    <--- SIP read from TLS:63.209.144.201:5061 --->
    SIP/2.0 180 Ringing
    From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
    To: <sip:[email protected]>;tag=c990d13f-13c4-5036bb3b-714198b9-32d150b4
    Call-ID: [email protected]
    CSeq: 103 INVITE
    User-Agent: SipGW 8
    Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1b988ba5;rport=50541;received=1.2.3.4
    Contact: <sip:[email protected]:5061;maddr=63.209.144.201;transport=tls>
    Content-Length: 0
    <------------->
    --- (9 headers 0 lines) ---
    list_route: hop: <sip:[email protected]:5061;maddr=63.209.144.201;transport=tls>
    -- SIP/skype-000000b1 is ringing
    <--- Transmitting (NAT) to 192.168.1.16:5060 --->
    SIP/2.0 180 Ringing
    Via: SIP/2.0/UDP 192.168.1.16:5060;branch=z9hG4bK-819ce62;received=192.168.1.16;rport=5060
    From: "Scott's Office" <sip:[email protected]>;tag=9961686dacab532ao0
    To: <sip:[email protected]>;tag=as3f27fa61
    Call-ID: [email protected]
    CSeq: 101 INVITE
    Server: Asterisk PBX 10.5.2
    Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
    Supported: replaces, timer
    Contact: <sip:[email protected]:5060>
    Content-Length: 0
    <------------>
    <--- SIP read from TLS:63.209.144.201:5061 --->
    SIP/2.0 408 Request Timeout
    From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
    To: <sip:[email protected]>;tag=c990d13f-13c4-5036bb3b-714198b9-32d150b4
    Call-ID: [email protected]
    CSeq: 103 INVITE
    Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1b988ba5;rport=50541;received=1.2.3.4
    Content-Length: 0
    <------------->
    --- (7 headers 0 lines) ---
    [2012-08-23 19:22:45] WARNING[17932]: chan_sip.c:20947 handle_response_invite: Re-invite to non-existing call leg on other UA. SIP dialog '[email protected]'. Giving up.
    set_destination: Parsing <sip:[email protected]> for address/port to send to
    set_destination: set destination to 63.209.144.201:5060
    Transmitting (NAT) to 63.209.144.201:5061:
    ACK sip:[email protected]:5061;maddr=63.209.144.201;transport=tls SIP/2.0
    Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1b988ba5;rport
    Max-Forwards: 70
    From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
    To: <sip:[email protected]>;tag=c990d13f-13c4-5036bb3b-714198b9-32d150b4
    Contact: <sip:[email protected]:5061;transport=TLS>
    Call-ID: [email protected]
    CSeq: 103 ACK
    User-Agent: Asterisk PBX 10.5.2
    Content-Length: 0
    Scheduling destruction of SIP dialog '[email protected]' in 32000 ms (Method: INVITE)
    == Everyone is busy/congested at this time (1:0/1/0)
    -- Executing [19739928881@home:2] Hangup("SIP/scott_office-000000b0", "") in new stack
    == Spawn extension (home, 19739928881, 2) exited non-zero on 'SIP/scott_office-000000b0'
    Scheduling destruction of SIP dialog '[email protected]' in 32000 ms (Method: INVITE)
    <--- Reliably Transmitting (NAT) to 192.168.1.16:5060 --->
    SIP/2.0 503 Service Unavailable
    Via: SIP/2.0/UDP 192.168.1.16:5060;branch=z9hG4bK-819ce62;received=192.168.1.16;rport=5060
    From: "Scott's Office" <sip:[email protected]>;tag=9961686dacab532ao0
    To: <sip:[email protected]>;tag=as3f27fa61
    Call-ID: [email protected]
    CSeq: 101 INVITE
    Server: Asterisk PBX 10.5.2
    Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
    Supported: replaces, timer
    Content-Length: 0
    <------------>
    <--- SIP read from UDP:192.168.1.16:5060 --->
    ACK sip:[email protected] SIP/2.0
    Via: SIP/2.0/UDP 192.168.1.16:5060;branch=z9hG4bK-819ce62
    From: "Scott's Office" <sip:[email protected]>;tag=9961686dacab532ao0
    To: <sip:[email protected]>;tag=as3f27fa61
    Call-ID: [email protected]
    CSeq: 101 ACK
    Max-Forwards: 70
    Contact: "Scott's Office" <sip:[email protected]:5060>
    User-Agent: Cisco/SPA504G-7.5.2b
    Content-Length: 0
    <------------->
    --- (10 headers 0 lines) ---
    Really destroying SIP dialog '[email protected]' Method: INVITE
    Really destroying SIP dialog '[email protected]' Method: ACK

    I wound up calling skype support. This is the final sip.conf looks like. Hope it helps. Good luck.
    Scott
    [general]
    context=default_context
    allowguest=no
    alwaysauthreject=yes
    allowoverlap=no
    udpbindaddr=0.0.0.0
    tlsenable=yes
    tlsbinddir=0.0.0.0
    tlscertfile=/usr/local/asterisk/etc/asterisk/keys/asterisk.pem
    tlscafile=/usr/local/asterisk/etc/asterisk/keys/ca.crt
    tlscipher=ALL
    tlsclientmethod=tlsv1
    tcpenable=yes
    tcpbindaddr=0.0.0.0
    transport=udp,tcp,tls
    srvlookup=yes
    dynamic_exclude_static = yes
    buggymwi=yes
    contactpermit=192.168.1.0/24
    register => tls://[email protected]
    [skype]
    type=friend
    context=from-skype
    dtmfmode=rfc2833
    host=sip.skype.com
    username=user
    fromuser=user
    secret=pass
    disallow=all
    allow=ulaw
    allow=alaw
    nat=yes
    fromdomain=sip.skype.com
    insecure=port,invite
    transport=tls
    srtpcapable=yes
    encryption=yes

  • I have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

    i have an ipod nano 5th generation. the problem with it's that it doesn't show in itunes when connected to the laptop and it switches on on its own and songs start playing the battery gets consumed too fast after full charge. what is the actual problem?

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • HT1420 How do you find list of actual devices that are connected to your itunes account?  I'd like to know before deauthorizing, exactly what devices it is showing as connected

    How do you find list of actual devices that are connected to your itunes account?  I'd like to know before deauthorizing, exactly what devices it is showing as connected

    Click here and ask. If the iTunes Store staff doesn't give it to you, no.
    (86004)

  • What is the impact if we switch from standard costing to actual costing?

    Hi all,
    what is the impact if we switch from standard costing to actual costing?
    what are the changes is needed in costing?
    thanks.

    Hello,
    Its an nice idea to switch from standard to actual costing. It would be advisable to make this switch over happen in a new period praferably with a new year. You would need to carry out the settings for material ledger / actual costing and for the accounting settings you may refer to sap note 908737.
    Not much costing changes would be necessary to the existing configuration but you would need to activate material ledger and allign your Inventory accordingly. The settings for ML would be relatively simple but the main problem would be handling the inventory that you already have in stock. You would also need to have a proper closing procedure followed by next month's planning approach which would actualise the inventory at the end of the month and decide the methodology for next month's plan valuation. It  should be kept in mind for configuring ML.
    The closing sequence would be as under:
    1. Complete all Cost Center and production order postings.
    2. Complete all Cost center Assessment / Distribution
    3. Calculate Actual rate
    4. Revaluate production orders
    5. Calculate WIP
    6. Settle Production Order
    7. Run Costing Run (CKMLCP)
    Material ledger is capable of actualising activity costs and WIP as well and you should configure it according to your need.
    You can follow the standard SAP documentations for configurations + Note 908737 for configuring ML.
    Kind Regards // Shaubhik

  • Skype Connect - Long time until call is received v...

    Hi Community,
    I just started to use Skype Connect. I configured one of my Skype accounts for inbound calls. The user is account is displayed as ONLINE and I'm able to dial in.
    My problem is that it takes 35 seconds to until I receive the SIP INVITE from sip.skype.com.
    Is this normal?
    Best regards
    Timmi

    Hello. I'm using Elastix (Asterisk) and REGISTER method.
    Suddenly, but now everything works. Nothing changes in my config.
    I think the skype servers needs time to update the record Skype->SIP.
    my register string and skype trunk:
    register=99999999999999:[e-mail removed for privacy and security]
    [skype_trunk]
    disallow=all
    localnet=192.168.1.0/255.255.255.0
    externip=XX.XX.XX.XX
    nat=yes
    defaultexpirey=30
    qualify=300
    externrefresh=30
    username=99999999999999
    type=friend
    secret=xxxxxxxxxxx
    insecure=port,invite
    host=sip.skype.com
    fromuser=99999999999999
    fromdomain=sip.skype.com
    dtmfmode=rfc2833
    context=from-trunk
    canreinvite=no
    allow=alaw
    allow=ulaw
    allow=g729

  • Skype Connect calls vs. local provider calls

    Hi! 
    Should I subscribe to Skype Connect, will I be able to choose which "phone line" to use for each call? Suppose I want to place via skype connect just international calls and make local calls via my local provider. Will that be possible? 
    Thanks,
    Dani

    Hello dr81to,
    I see you have a question on how to use a Skype Connect account and it's calling features. 
    In most cases, users just use Skype for all calls, sinse they are so cheap.  Calls around the world and around the block are very cheap.  But, if you wish, you can use a SIP enabled device (like a Grandstream, Cisco, Avaya, Siemens, or others...) with 2 lines and have a Skype SIP Line on one and your local PSTN line on the other. That way you can select which line you want to use.  You can also use a softphones like 3CX, or Bria to select each line too.  The choice is yours.  Have fun using Skype.
    Thank You for using Skype and the Skype Community Forums.
    Regards,
    Victor S.
    Skype Enterprise Support

  • Skype for business unable to pick what device calls are trasfered to

    Hi all Ever since the change from linc to SFB I no longer have any control over what device calls get transfered too. As an example I take an outside call caller needs to be transferred to my co-worker I try and transfer to my co-workers skype however it will always transfer to his/her mobile phone. This happens regardless of the settings my co-workers settings in skype. This is extremely frustrating as i have a few unhappy engineers giving me dirty looks when the calls go sometimes randomly to whatever device Skype sends a call too.  Please note I do not have access to Skype manager. 

    In Skype that can occur if the person is not online (or appears offline), so it forwards to their offline contact (phone number).   Since you have Skype for Business you should be contacting your admin or possibly finding a solution in the Office Community forums.  If you are the admin and are unable to find a solution, you should be putting in a request with Microsoft Office support.  http://go.microsoft.com/fwlink/?LinkID=270873

Maybe you are looking for

  • Ati drivers no longer work after upgrade

    I was trying to mount a vfat partition the other day, to copy files from a friends USB drive. It would not mount no matter what I did. I had found out that for some reason, the last kernel that I updated to did not have the proper character set enabl

  • Help needed with LMS Reporting Settings

    I am new to Captivate and am working with 5.5 to create a number of large courses. The first course, I have split over 5 captivate files as there are a large number of slides in each file.  I have reviewed the Help PDF on Learning Management System,

  • Dear freinds how to open the fields in the PNP selection screen

    Dear Freinds,          When you use the PNP selection screen , i dont find the Orgeh field in default selection screen . However , using the code at selection screen output i have closed certain feilds using the loop at screen, but when iam trying in

  • Personal Keyboard settings

    Hey got a problem got a mac with a u.s. keyboard but i also need some special letter on it like ä,ö,ü would like to keep using the u.s settings, and integrate those special characters, e.g control + a = ä ; is it possible to customize it in some way

  • How can all the users in my computer (my kids) have access to all the photos I have in I Photo?

    How can all the users in my computer (my kids) have access to all the photos I have in I Photo? My photos only appear when I (the administrator) log into the computer. I want my kids to be able to access them also.