What do clips with diagonal stripes mean in the timeline???

If you look at the two video clips labeled "R21" in my timeline, you can see that there they have diagonal lines through them. Can anyone tell me what that means?
I don't think they're offline because otherwise I would see the usual multi-lingual notice in the program monitor window indicating "offline"
Thank you in advance.

Hi Kevin,
Haven't had any issues with out of sync clips. What seems strange is the the monitor window is black yet the clip isn't disabled. And I don't believe it's offline. But do you know what a clip with diagonal stripes through it means in Premiere? I've looked elsewhere online, even in Premiere's help section and haven't found out what this means. Thank you very much for your help.

Similar Messages

What type of movie clips are handled by the ipad? I have shot a movie clip with my canon camera and the file is .AVI. will this load onto ipad?

what type of movie clips are handled by the ipad? I have shot a movie clip with my canon camera and the file is .AVI. will this load onto ipad?

Per http://www.apple.com/ipad/specs/
AirPlay Mirroring to Apple TV (2nd and 3rd generation) at 720p
AirPlay video streaming to Apple TV (3rd generation) at up to 1080p and Apple TV (2nd generation) at up to 720p
Video mirroring and video out support: Up to 1080p with Apple Digital AV Adapter or Apple VGA Adapter (adapters sold separately)
Video out support at 576i and 480i with Apple Composite AV Cable (cable sold separately)
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

My connected audio only clips moved from below to above the timeline. What happened? How do I get them below the timeline again?

My connected audio only clips moved from below to above the timeline. What happened? And how do I get them below the timeline again?

Repeatedly crashes. What I ended up doing was using a backup Final Cut Projects file and jettisoning this one with the glitch. Luckily, nada much lost. I've had a couple of these weird glitches happen in the Timeline, esp. when dealing with compound audio-only clips & some fx's and rather than spending mega time trying to fix the problem, I bail and start again, and try to be more methodical in my approach.

I don't understand what's happening with my Music. All the songs that I purchased, that were previously on my phone, now show up a Cloud next to them, but I can't play them. If I touch the Cloud, it turns into a red square but never downloads.

I don't understand what's happening with my Music. All the songs that I purchased, that were previously on my phone, now show up with a Cloud next to them, but I can't play them. If I touch the Cloud, it turns into a red square, acts like it's downloading (which I can see happening in iTunes), but never downloads. The Cloud just stays there.
I've sync'd my phone, I've turned it to "show all music" in Settings, I've drag and dropped the songs/albums onto my phone again. I feel like I've tried everything I've seen recommended, but nothing works.
I've purchased a lot of music from iTunes. It should be there. What's going on?
P.S. Same thing happening with my purchased books. Ugh.

Once you successfully add you iTunes library to iTunes Match, you go to Settings>iTunes & App Store on your iOS device and turn on iTunes Match. Your iTunes Match library will then appear on your iOS device.

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Some of my songs in iPad Mini with RD disappeared all the sudden and I need to redownload it again. Same thing happen to my iPod touch 5 too. What's wrong with it? Is it the iOS problem?

Some of my songs in iPad Mini with RD disappeared all the sudden and I need to redownload it again. Same thing happen to my iPod touch 5 too. What's wrong with it? Is it the iOS problem?

Delete the music in your iTunes library, then go to iTunes store, Quick Link, 'Purchased' to redownload again.

Ever since I got the new update 5.1 my iPod's been dying faster. It used to last for at least 3 hours, now it won't even last one hour and dies for no reason(even when it's in sleep mode, and not in use) What's wrong with it? Is it the update? lagging too

Ever since I got the new update 5.1 my iPod's been dying faster, even after I charge it. It used to last for at least 3 hours, now it won't even last one hour and dies for no reason (even when it's in sleep mode, and not in use) What's wrong with it? Is it the update? It's lagging as well..

Some Users have Reported that a Restore as New has helped Resolve issues...
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137

What is possible with non oracle components in the EMGC 10g release 3

Hello,
What is possible with non oracle components in the EMGC 10g release 3
Our customer wants to also monitor and maintain non oracle components with EMGC 10g release 3.
Some non oracle components are:
Routers,
Firewalls,
Application Servers,
Switches,
Mail Servers,
DNS/DHCP servers,
Print Servers,
File Servers,
NTP,
Citrix,
Terminal Server,
Lotus Notes,
Etc etc.
Is there a document on which non oracle components can be monitored in the EMGC and what can be maintained with these components?
Regards,
Tim Abdoelhafiezkhan

Take a look into Plug-ins, there are some none-oracle ones pre built by Oracle and others.
There's a forum about Extensibility in the current category here.
Also, for further extensibility, the new Connector Framework looks interesting, see the OEM Integration Guide.

How to unglue clips that are stuck together in the timeline

I've looked everywhere, I'm sure it's there but I can not find how to "unglue" clips that are stuck together in the timeline. NOT break apart clip items, but get rid of those pesky things that attach the different levels of video together. And BTW what the heck are those little claws called?
Thank you so very very much in advance!

You can't move tracks. Everything in the timeline has to be connected to the primary storyline at some point. Each clip that's connected can be connected individually so it's free floating and the connection point can be moved anywhere you want, or the clips can be strung togother and connected at a single point. You can Opt-Cmd-click to change the connection to a new location, but it has to be connected somehow.

What do the globe and triangle with exclamation point mean on the URL bar and why do they sometimes change while surfing a page?

I have always about this, as I've seen these more than once along multiple versions of Firefox. I'm well aware that the lock means the site is 'verified' though I don't know exactly what that entails. More recently, I've noticed that many websites either have the lock or else the globe with the markings on it which says that the connection to the site in question is 'unencrypted', but I don't know what that means. Sometimes this will change between pages on the same website. What I find stranger is that sometimes a a single page on one site will go from the lock to the triangle with the exclamation point in it. Now from what I can tell, it means something similar to the globe, as they seem to both state the same basic thing, that the website doesn't supply identity information and the connection isn't encrypted. What I want to know is how and why this happens, and sometimes even while still on the same page. I've encountered this on three different versions of firefox. The 24 esr, 28.0, and version 34. (Not all on one computer, mind. Though I believe it's possible to have multiple instances of Firefox on the same machine as I know someone mentioned being able to do that on another thread and I'd love to know how that's done if anyone can answer it.) These versions of firefox were on 8.1, and two distinct versions of XP from two different machines. Is this an odd glitch, or is something else going on there and if so, how does one fix it? So far it's happened to me twice on my own computer, once on a fiction website, and as of tonight, once on youtube. On the former, the switch happened on a single page, while on Youtube it changed from one page on the search bar to the actual channel of something in question and back again. Closing out the tab and doing a quick clearing of history seemed to work fine on youtube. The fiction website, not so much, though I haven't seen the triangle thing come back again, as everything there seems to be the globe. So far anyway. However it has come up before on various computers in the past that I've used with various firefox versions, as I've said. Can anyone explain what this is and how to fix it if it is indeed a problem?

''jscher2000 [[#answer-707094|said]]''
<blockquote>
The green padlock means your connection is HTTPS (encrypted) and the certificate identifies a particular site operator. Certificate issuers demand special verification for the Extended Validation (EVSSL) certificate that generates a green padlock.
The gray padlock means your connection is HTTPS (encrypted) but the certificate cannot establish the operator of the site one way or another. No special identification is required to get this certificate.
The exclamation point triangle symbols may indicate that the connection is partially encrypted -- some content is the page was sent over an open connection -- or recently it may indicate that the site uses such easily cracked encryption that you should treat it as providing no protection.
And the point of all this is?! Simply this: if your web traffic is ''not encrypted'', it can be read by others. That's why login pages and sites dealing in your personal or sensitive information should always show a padlock in the address bar. If it's not there, be concerned.
If a normally secure site suddenly shows a mixed content icon, try reloading the page (Ctrl+r or to re-request fresh copies of cached files use Ctrl+Shift+r).
</blockquote>
As it happens, I have tried the refresh thing. It doesn't always work on sites where this sudden changeover occurs. The weird thing is that, again, this happens at random and I've seen it occur over multiple versions of firefox, past and present, so it's not just relegated to just the three main ones I have most recently seen it on.
Now what makes this even stranger is that I have seen a few pages on the fiction website (www.fimfiction.net to be specific) where the grey padlock at the very least shows up on a page, but then suddenly will go to the triangle. Not all of these pages have mixed content or even any content at all beyond simple text. A few have pictures or clickable links, but I usually avoid clicking on the links if I don't know and trust the website. More recently though, the near-entirety of the site has gone to the globe, when before it was the grey padlock. I think the one thing that remains padlocked is its login section. Is it just that the website needs to update its certificates? If so, I can probably just send the site runner a message about that.
I dunno what to do with youtube when it shows up though other than just closing out the tab it's on, clearing my browser history, and reopening the site. It happens rarely with youtube, but it's not unheard of, and it follows along every page on the site once it pops up in one page at all until I shut down that tab. And this is a multiple version thing. These are the two sites where I encounter the issue the most as it's one of only a handful of websites I go to aside from an image gallery which is typically very good about safety. Or as much as it can be, at any rate. The only other site I frequent, www.fanfiction.net (probably the oldest fiction website still active today, and not to be confused with fimfiction) has the grey padlock at all times, aside from when I log into the site. I've used the https: prefix most times when going to a site the first time, and firefox has typically then used that prefix anytime I just enter the general website address in the URL bar, but sometimes it doesn't. Is that partially responsible for why I have seen the padlock switch to the triangle sometimes? I know the link that cor-el posted says that by default from version 16 up, mixed content is blocked by default and I don't think I've ever touched that in the options section of the tools, so what exactly do I do here? Just ignore it, or just keep hitting refresh or what? It doesn't happen all the time, after all, but it does still get annoying.

Dragging multiple media clips into vertically stacked tracks in the timeline? Is it possible?

Hoping that some Adobe Premiere Guru might be able to lend some insight into what seemingly should be a fairly simple thing to accomplish... but despite scouring the web, I can't seem to find a peep of a solution for it.
My neighbor (whom, incidentally, I convinced to go with Premiere CS5.5 as his NLE of choice in the wake of the FCPX uncertainty) is working on a "reality-style" project where they have a massive amount of cameras running simultaniouisly for hour upon hours on end. Think Big Brother House style.
Essentially for each hour of the footage, he is creating a project in which all the multiple camera footage (MOV) from that hour is listed/linked over in the project panel. For example, for HOUR ONE he has the footage from all 20 cameras (or whatever) for hour one listed there.
BASICALLY what he wants to be able to do is grab ALL the footage from those various cameras AT ONCE, DRAG them over to the timeline and when he drops them there, the video (and, inversely, the audio) clips STACK vertically, one on top of the other, each one taking its own track in the timeline.
Currently, of course, when he does this the footage arranges itself in the timeline end to end. In the case of my HOUR ONE, 20 CAMERA example, this basically creates a 20 hour long clip, as oppossed to a one hour clip with 20 tracks, stacked one on top of the other.
As near as we can tell, there's no keyboard shortcut to make this happen. I VAGUELY recall being able to do this in FCP (maybe?) so I'll be stunned and more than just a little bit disappointed to if there isn't SOME way to pull this off in Premeire.
Does anybody have any idea if this mode of automatically dropping clips into the timeline as stacked tracks is possible? It will, quite literally, save him hours and hours of work if he can figure out the secret. And I won't feel quite so guilty for having turned him onto Premiere for this specific project!
And if anyone knows for a fact this is NOT possible, that would be great to know as well. At least we can put the notion to bed one way or another.
Thanks in advance.
Regards, Michael

You can do this with the make multi-camera source sequence command in Premiere Pro CS6 (note that this was posted before CS6 was launched):
Mark the clips
Select the clips
Choose Clip > Create Multi-Camera Source Sequence
Choose the style of synchronization and click OK
Right click on Multi-Camera source sequence and choose > Open in Timeline.
Clips are now stacked up inside of a sequence
More here: http://helpx.adobe.com/content/help/en/premiere-pro/using/editing-multi-camera-sequences1. html#source_sequence_for_multi_camera_editing

Not happy with moving around keys on the timeline

I just changed from Final Cut to Premiere CS5.0 and I really like it. Working on a Macbook Pro i5 2.3GHZ, Mac OSX 10.7 But I am not happy with moving around on the timeline. I was used to using the up and down arrows to move to next video edit point, marker point or audio edit point. I tried everything to change it, highlighted the track etc. It only works together with the FN key, which is a bit uncomfortable. And then it definetely is not going to any audio edit points (very annoying!!!) and marker points (have to use Q and W keys). It makes me doubting if continuing with Premiere or not. Its such an esencial and easy to use tool while editing in a normal fast editing rythm. When I change it in the customize keyboard menu, into a Custom keyboard or FCP keyboard, it would ignore my changes on the arrowkeys, although it recognizes any other changes I do. Is it so complicate to change this issue in Premiere to how it is set in FCP? Its such an obvious tool, using the arow keys to move around, cannot beleive that we have to live with such a limitation. Please!!!

Its such an obvious tool, using the arow keys to move around, cannot beleive that we have to live with such a limitation. Please!!!
You dont have to live with that at all if you are fixed only to what you have previously done.
It makes me doubting if continuing with Premiere or not.
There ya go!

My clips have a yellow line on the timeline sequence. Does this affect my video quality output if I don't render?

I use Adobe CS 6 to edit and I use Sony NX 3 to record. Every time I import my clips. It has a yellow line on the timeline sequence, even when I make new clip from the sequence.. My question is, does this affect my video quality output if i did not render the yellow line out? Please someone help me

Please see this link for more info about red and yellow bars - http://blogs.adobe.com/premierepro/2011/02/red-yellow-and-green-render-bars.html
If you shoot 1080p, you will likely have better results going to DVD than if you start with 1080i. It's hard enough downscaling with decent quality, then if you add in interlacing issues...
When exporting from Premiere to create a DVD, choose "MPEG-2 DVD" as the format, and then choose a preset such as "NTSC Widescreen Progressive".
There is a checkbox at bottom of export window for "Max Render Quality" - use that for best downscaling results.
Use 2-Pass VBR encoding. Use a bitrate calculator to determine best bitrate for length of movie, or quick option is 560/minutes = bitrate. But don't exceed 8.0 on shorter movies. I typically round down a little for safety margin, such as 560/120 = 4.6, encode at 4.5 and no worries.
The export will result in TWO files, .m2v video and .wav audio, import both into Encore for authoring. Encore will convert the .wav to Dolby AC3, reducing file size. Video should NOT get transcoded. And as others said, don't expect HD quality when viewing a DVD...definitely not HD video any longer. But do be sure to use an upscaling player, this makes all the difference. If you run a yellow composite cable from DVD to TV, it will look horrible. Use HDMI with upscaling DVD/Blu-ray player for improved result.
Good luck
Jeff Pulera
Safe Harbor Computers

Why do the thumbnails in a clip need to repeat themselves in the timeline?

I'm confused about something. When I drop a clip into the timeline, if I want the video and audio to show then the thumbnail for the clip basically repeats itself for the length of the clip in the timeline. In FCP 7 when a clip is dropped in the timeline there is one thumbnail on the left and then just the length of the clip.
It is very hard to see clip separation in the timeline if it's a constanst stream of thumbnails - anyway to turn this off???

Tom, you seem a little negative - just an observation from someone who is knew to this board. I'm just trying to get an understanding of a new application. I of course, am only working from my knowledge of FCP 7. I've worked in FCP since 2002 so I'm very aware of FCP 7. I'm not trying to make FCP X into 7 but I am wondering how some of the SIMPLE things that were able to be achieved in FCP 7 seem so complex (and maybe not even possible) in FCP X...
The thumbnails don't NEED to repeat themselves, it's silly. I've played with the settings at the lightswitch and none of them controls the amount of thumbnails that are displayed. Having all those thumbnails makes it VERY hard to see clip separation. If you call that trying to fit FCP X into FCP 7 then so be it, but it seems pretty logical to me to ask for this option...
Hope you're having a lovely day!

HT202677 What does circle with exclamation point mean?

while trying to play music throught my computer, a circle wth an exclamation point shows up in iTunes and says that I have to locate the file. Never had to do that before. How do I correct this problem?

Take a look on this thread
Exclamation marks next to songs in Itunes!

What do clips with diagonal stripes mean in the timeline???

Similar Messages

Maybe you are looking for