What do I do at firefox to get it to work with proxy Real-Hide-IP
I tried to get an answer at Real-Hide-IP a VPN that changes IP with the click of a button. Each click toggles between your real IP and a fake IP. They were impossible to deal with. I hope you can help me. It seems to me I have to do set some conditions at firefox when I am using the fake IP. If true, can you guide me. I found your dialog box with IP conditions, but nothing would work.
hello billtalmadge, i'm sorry but we are not in the position to help you with third-party products (please refer to the [[Forum rules and guidelines]]). thank you for your understanding...
Similar Messages
-
My setup is as follows: iMAc-> Timecapsule->airportextreme->appleTV.
http://support.apple.com/kb/HT1274
-
I have been using Hypersnap dx pro for awhile now with firefox but it won't work with auto-scroll to get the whole page. Thanks.
A mouse, which is a pointing device, will not work with an iPad...there is no cursor for the mouse to move around. You must use the touch screen.
-
Is there a way to get Keychain to work with Firefox 3.5.1?
I can't figure out how to get Keychain to work with Firefox 3.5.1. It works fine with Safari 4.0.2. An assist would be greatly appreciated.
HI,
With Firefox open, from the Menu Bar, select Firefox/Preferences. Click the Security tab. Under Passwords; Select Remember passwords for sites.
Also, check out this thread http://discussions.apple.com/thread.jspa?threadID=1692413&tstart=0
See "roam's" post with the yellow star.
Carolyn
Message was edited by: Carolyn Samit -
I can'nt get skipe to work tells me invaled port how do i get it to work with firefox
when i use my firefox i cant seem to get skipe to work with it and it tells me invaled port so please help me fix this.
Hi rockerbelsatx, could you clarify which platform you want to run Firefox on? You posted from an iPad, but there is no version of Firefox for iOS devices, only "Firefox Home." Also, as far as I know, there is no paid version of Firefox for any platform.
More information on Firefox offerings: http://www.mozilla.org/firefox
With a little more info, we probably can be more helpful. -
What is the latest version of firefox that foxy tunes will work with
what is the latest version of firefox that foxy tunes will work with
It is compatible with Firefox 9
* getfirefox.com
foxytunes are here
* https://addons.mozilla.org/en-US/firefox/addon/foxytunes/ -
I bought logic studio with compressor 3.5 what happens if I buy compressor 4.0, will it work with Logic? should I get a free upgrade since I bought it recently?
I don't see any problems but I haven't used it a lot.
-
i have an iPod touch 5th generation and it died but when i plug it up it wont charge or turn on. what do i have to do to get it to work?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
What's the multi colored pinwheel I get when I work on my mac book pro?
What's the multi colored pinwheel I get when I work on my mac book pro?
Zyriab wrote:
it means the system is busy and you have to wait before it will respond to mouse clicks or key presses by you.
Sligh correction here. Sometimes it is the system; but sometimes it is just a specific app, while the system will continue to accept user input, and you may switch to a different app.
The 'official' name is the spinning wait cursor. Go to
<http://www.thexlab.com/faqs/sbbod.html>
for a few more details and troubleshooting techniques (if necessary). -
The airplay on my i pad works with music and pictures but I cannot get it to work with safari and mirroring. Can someone help me to get things working? Thanks!
As an IT person, I can put my hands up to the same difficulty. Then on double clicking on Home button, find AirTV symbol amongst Music control
Solved my problem having spent hours looking for a complicated answer. Well done Apple for hiding it so well.
Brian -
a.
After downloading Flash 9, how do you get it to work with Apple iMac OS X 10.3.9 ?...
b. , c.
What's the best browser to try?... Firefox?... Opera?...
Why?...
d.
What directory/ies contain the downloaded Flash 9 files?...a. Your browser and the flash player should work together. You should not have to do any thing
b. Camino is the best for 10.3.9 Why? You can access apples me.com through Camino on 10.3.9 but Safari will not work with me.com. Also all the internet plug ins work with camino
c. hard disk - library - internet plug ins -
a.
After downloading Flash 9, how do you get it to work with OS X 10.3.9 ?...
b. , c.
What's the best browser to try?... Firefox?... Opera?...
Why?...
d.
What directory/ies contain the downloaded Flash 9 files?...a. Your browser and the flash player should work together. You should not have to do any thing
b. Camino is the best for 10.3.9 Why? You can access apples me.com through Camino on 10.3.9 but Safari will not work with me.com. Also all the internet plug ins work with camino
c. hard disk - library - internet plug ins -
How do I get fios to work with my new desktop w/ Windows Media Center
Can someone please help me I have "fios".TV and internet 1HDSTB + 1HDDVR with multi room dvr Home media mgr.how do I get fios to work with my new desktop HP Pavillion m9715f**(specs below)**w/ Windows Media Center or did I just throw away my money?
also equipted is 47" Samsung 850series 1080p 120hertz HD LCD TV + 36" Samsung 560series 1080p 60hertz HD LCD TV and 19"Samsung 950b LCD Monitor
** computer specs**
Product number NZ017AA
Introduction date 30-Jun-2009
Country/region sold in: United States,Canada
Hardware Base processor
Phenom-9650 (A) 2.3 GHz (95W) 3600 MHz HyperTransport 3.0 Socket, AM2+
Chipset AMD 780G
Motherboard Manufacturer: MSI Motherboard Name: MS-7548 HP/Compaq motherboard name: Aspen-GL8E
Power supply 300W
Memory
Component Attributes Memory Installed 8 GB Maximum allowed 16 GB (4 x 4 GB) (64-bit OS)
4 GB* (4 x 1 GB) (32-bit OS)
*Actual available memory may be less Speed supported PC2-6400 MB/sec Type 240 pin, DDR2
Hard drive750 GB SATA 3G (3.0 Gb/sec)7200 rpm
Blu-ray player & SuperMulti DVD burner with LightScribe Technology drive
This Blu-Ray Disc DVD drive introduces a player that reads Blu-ray Disc format enabling you to watch high-definition Blu-ray Disc movies. NOTE: This drive does not include high-definition write capability.
Formats/Disc types Write speeds Read speeds Storage capacity Blu-ray Disc BD-ROM SL NA up to 6X up to 25 GB BD-ROM DL NA up to 4.8X up to 50 GB BD-R SL not supported up to 6X up to 25 GB BD-R DL not supported up to 4.8X up to 50 GB BD-RE SL not supported up to 2.3X up to 25 GB BD-RE DL not supported up to 2X up to 50 GB HD DVD not supported DVD DVD-ROM SL NA up to 16X up to 4.7 GB DVD-ROM DL NA up to 8X up to 8.5 GB DVD+R SL up to 16X up to 12X up to 4.7 GB DVD+R DL up to 4X up to 8X up to 8.5 GB DVD+RW SL up to 8X up to 10X up to 4.7 GB DVD+RW DL not supported DVD-R SL up to 16X up to 12X up to 4.7 GB DVD-R DL up to 4X up to 8X up to 8.5 GB DVD-RW SL up to 6X up to 10X up to 4.7 GB DVD-RW DL not supported DVD-RAM up to 5X up to 5X up to 4.7 GB CD CDROM NA up to 40X up to 700 MB CDR up to 40X up to 40X up to 700 MB CDRW up to 24X up to 40X up to 700 MB CD-DA NA up to 32X up to 700 MB Video CD NA up to 10X up to 700 MB
Wireless Wireless LAN 802.11 b/g
Video Graphics Radeon HD4350
512 MB DDR2 memory
I/O Ports: HDMI, VGA, single-link DVI
Television Hauppauge ATSC/NTSC TV tuner card with FM tuner
Sound/Audio High Definition 8-channel audio
ALC 888S chipset
Network (LAN) Integrated 10/100/1000 Base-T networking interface
Memory card reader
Contains an Infrared receiver for remote control
Supports the following cards:
Compact Flash I
Compact Flash II
IBM Microdrive
Secure Digital (SD)
mini-SD
MultiMediaCard (MMC)
Reduced size MultiMediaCard (RS-MMC)
MultiMediaCard Plus (MMC plus)
MultiMediaCard Mobile (MMC mobile)
Memory Stick
Memory Stick Pro
Memory Stick Duo
Memory Stick Pro Duo
SmartMedia
xD Picture Card (xD = extreme digital)
External I/O ports
I/O ports on the front panel
Port type Quantity 15-in-1 (4 slot) with IR Receiver One USB Two Headphone One Microphone One Audio L-R One S-video in One Composite video in One
I/O ports on the back panel
Port type Quantity PS/2 (keyboard, mouse) Two S/PDIF out (coaxial) One VGA One (disabled due to the installation of a graphics card) DVI-D One USB Four 1394a One LAN One Audio (side speaker out, rear speaker out, center/subwoofer-out , line-in, line-out, microphone) One Each
Expansion slots
Slot type Quantity PCI Express x16 One (None available) PCI Express x1 Three (Two available)
Drive bays
Bay type Quantity 5.25" Two (One available) 3.5" Two (One available) Personal Media Drive One (One available) Pocket Media Drive One (One available)
Keyboard and mouse HP multimedia keyboard HP PS/2 optical mouse
Remote Control USB infrared remote control,Remote control expansion card with IR ports,IR emitter cable to transmit codes to a set top boxBased on what you've posted, your computer does not have the right tuner. You need a QAM tuner to record locals from FiOS, or a CableCard tuner to record all local and cable channels from FiOS.
QAM tuners to record local channels only
This requires Windows Vista or Windows 7
Hauppauge WinTV-HVR-2250
SiliconDust HDHomeRun (info on a sale)
CableCard tuner to record local and cable channels
This requires Windows 7 + one CableCard from Verizon for $3.99/mo
ATI TV Wonder Digital PC CableCard Tuner (records one channel at a time) -- $200-$250 on ebay
Ceton MOCUR tuner (records four channels at a time) -- coming in early 2010 for $400-$600
Make sure your computer has Windows 7 Home Premium (or better) installed. That's necessary to support CableCard tuners.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. -
I have a Power Mac G4 and i am trying to get it to work with my LCD
I have a Power Mac G4 and i am trying to get it to work with my LCD Monitor/TV. The connection on the computer is DVI and the connection on the Monitor is DVI. The Monitor says in the manual to hook up computers using the DVI connection. When I connect the too the monitor says there is no video input. I tried changing the settings on the monitor from PC mode to DVI mode and nothing. I have also tried changing the display on the computer to a couple of different settings and nothing. Please Help?
Hi-
A little more info please.
What model G4?
What Graphics card?
What OS?
What model/make of monitor?
G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, RaptorSATAATA, ATI Radeon 9800 Mac OS X (10.4.8) Pioneer DVR-109, 23" ACD, Ratoc USB 2.0, QCam Ultra, Nikon Coolscan -
I am an avid Elder Scrolls fan and am using the new STEP 2.2.9 setup. They've gone to Mod Organizer (MO) and I cannot seem to get my FF working with the download mod portion of things. I click the "earth" icon, which takes me immediately to the Nexus Mod files page but when I choose a file to download after clicking "Download with Manager" I get this error message:
The address wasn't understood
Firefox doesn't know how to open this address, because one of the following protocols (nxm) isn't associated with any program or is not allowed in this context.
You might need to install other software to open this address.
The address given, when clicking "Download with Manager" begins with nxm://Skyrim/mods/ The address is such due to trying to download with the manager.
Any help will be greatly appreciated! I've pulled my hair out for the last few hours trying to find a fix. I've disabled Adblock, all other popup blockers and enabled the main address in my exception rules. It's just not working. Ugh!
Thank you in advance!In order to use ''nxm://'' links, Nexus Mod Manager must be installed and associated with the ''nxm'' protocol.
* http://www.nexusmods.com/skyrim/mods/modmanager/
In case of problems with this third-party program, please refer to its support forum:
* http://forums.nexusmods.com/index.php?/forum/1413-nmm-code-development-chat
Maybe you are looking for
-
I am trying to figure out ow to prevent tables from breaking along a row when there is a page break in "Pages". This is done in MS Word by going under Table properties under "Rows". I have a document with small three row tables and I want to keep
-
MCS 7825-H3 Experiencing EXT Error
We're receiving the following error on boot - fsck.ext3: invalid argument while checking ext3 journal for /common. This document suggest that we run the Unified Communications Recover CD in order to restore access - http://www.cisco.com/image/gif/paw
-
I want to buy a new i mac but I do not know whether I should focus my money on spending more on RAM or GHZ? I will mainly be using my new mac to edit videos on i movie, view & edit my photos, browse the internet and play a few newer games like Diablo
-
How to make a call in j2me using bluetooth?
Hi All, I wanted to make a call to another device which is in my bluetooth range i wanted to know how to make such a call?And i have heard that using bluetooth for making calls we can only do half duplex communication that is at a time only one perso
-
Hello, I am using Crystal Reports to create a statement. We would like to include hyperlinks in our report. We have already created hyperlinks within the report. The hyperlinks are only operational when I click within the subreport. I want to process