What do i do if my iphone only shows the apple logo?
It only shows the apple logo noe and then. Help please
Restore it. This link will help: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Similar Messages
-
my iphone no longer shows up on my computer, the iphone screen has gone blank only showing the Apple logo. I am unable to make and receive calls. Can someone help me with this problem please?
Your iphone is shown at the top of the page.
You can also simply click View>Show Sidebar and it will look about the same as it did before. -
when i plug in my ipod to the computer it only shows the apple logo and dosent show up on itunes. What do i do to fix this?
First, make sure iTunes is correctly installed. You may want to reinstall it.
http://support.apple.com/kb/ht1925
If iTunes is installed correctly, hold down the volume down and sleep/wake buttons till you see the apple logo, then try again.
i -
Hi all,
i was upgrading my iphone to ios6.1.2; the upgrading had been completed and starting to install but suddenly the wi fi connection lost and the installation couldn't be completed. Now my phone is dead....it only shows the apple logo....can't do anything..help me out..Press the button at the top right and the home button together for 30 seconds, when you see the apple logo, let them go.
if you see a picture of the itunes symbol and a whitye usb chord then connect the device to a computer and perform a restore. -
My ipod touch only shows the apple logo, and i can't connect it to my computer. when i connect it, it doesn't show up in my itunes, or even in my computer. I was updating an app last night, and it wouldnt work, and it shut off.
If it is still charging using the adapter, let it charge for 10min, then connect in recovery mode, explained here:
iOS: Unable to update or restore -
while updating my ipod touch something happened and now the screen only shows the apple logo that goes on-off. i dont know what to do,please somebody help me!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iPad air would not start. Only show the apple logo then no reaction after that.
My iPad air would not start. Only show the apple logo then no reaction after that. This is already the 2nd time. Last time I sent back to the service center and they said it is the system problem and reset the system and charge me for the service because they said it is not a hardware problem. It happened less then 30 days and same problem again. Can someone please send me the hard-reset step so I can try myself before I send back to the service center again? thanks
Here's the hard reset info:
http://www.hard-reset.com/apple-ipad-hard-reset.html
Post something about what happened with your visit. -
How to fix a frozen ipod touch, it only shows the apple logo?
How do you fix a frozen ipod touch, it only shows the apple logo?
Hello,
I have same broken iPod Touch 4G, I'm stuck on the Apple logo and only what I can do is just restart. If I connect iPod turns on but that's all. I checked a lot of tricks how to restart/reboot device and how to get DFU but I have only the logo. iTunes on my mac can't recognize the device.
And in Apple retail store the guy told me: sorry it's dead. We can fix for about £200. After 1 month when my waranty is finished. Funny isn't it? I can't believe that my lovely iPod is dead after 13 months. Where is the "for quality you have to pay." Is it conspiracy if you don't buy extra waranty we will send you killing signal into your iDevice?
Many thanks for help -
Ipod touch wont switch on and constantly only shows the apple logo screen
ipod touch wont switch on and constantly only shows the apple logo screen. Have tried to reset by holding both buttons down but hasnt worked. it also doesnt appear on itunes.
Hvae you tried:
- Reseting the iPod and then try restoreing the iPod
- Placing the iPod in recovory mode and then restoring the iPOd. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Next try DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
my ipod touch does not turn on after steps 1-4. It only shows the apple logo and turns off
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Will only show the apple logo thats it I can do noithing else
my ipod only shows the apple logo and willl not do anything else how do i fix it?
Try to Reset your device.
Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off that shows up first). -
Nano frozen. only shows the apple logo
my nano seems to be frozen. it only shows the apple logo. ive tried to reset it a couple of times but its still the same. the apple logo still appears and its still frozen. sometimes if i wait a while the screen lights up but its still the apple logo that it displays. the only difference is that the backlight is on. please help me solve this!!!
Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651 -
Device only shows the apple logo
My I Pod touch only shows the apple logo. I have installed the updated version of itunes and it will not reconize my device.
Instructions are here.
There have been some problems accessing pages on the Apple web site. If the hyperlink doesn't work, try again. -
Ipod only showing the apple logo and will not do anything else. 1st GEN
my ipod will only show the apple logo when plugged in to my computer i have a dell running xp but i have tried other computers and it will not do anything but show this symbol. my computer does not recognise that it is plugged in. ive tried the apple support fix-it but it does not do anything period. the buttons do not work when plugged in or not. the only thing it does is light up when plugged in. my other ipod works perfectly no problems so this leads me to believe that its not the computers i have used. just think the ipod has had it
Mine did the same thing last week after trying to update it via wi-fi. I then spent 11 hours Sunday updating my itunes on the laptop then restoring my ipod. Now all it does is beep as if it is just plugged in and flash the white apple logo. It beeps constantly. My computer at first didn't recognize it, then it did but said I needed to unlock it,(since I can't get the home screen up, I can't.) and now it doesn't recognize it at all. I've tried both computers.
-
can't locate the serial number the phone only shows the apple icon I charged it. I will only show the apple icon?
If you decide that you want to Restore the iPhone Firmware then. Open iTunes on computer, connect iPhone to computer with USB cable. Hold both home and power buttons for exactly 10 seconds, then release the Power button, keep holding the Home button for about another 20 seconds, until iTunes recognizes the iPhone in Recovery Mode. If the iPhone screen is black this is good. Restore the iPhone Firmware. If you get Recovery Mode but the iPhone shows the iTunes screen you can try to Restore, but if it fails, do the instructions again until you get Recovery Mode with black iPhone screen.
Maybe you are looking for
-
Hi all I am vex. Any idea how to solve this Print Layout Design printing error happening to only one sap user's computer? Other sap users login to the same Database printing the same Print Layout Design Name in their own computer has no problem. Howe
-
Acrobat X - Batch Processing?
Can you do batch processing in Acrobat X like you can in Adobe Pro 9
-
Opening premier elements for first time. Been "gathering user info" for 15 minutes...what to do? Previously hit "organize", ran for 25 min till hit 100%, then "had to close"?
-
SAP table names for Configuration Scenarios
I am trying to write an ABAP report in XI that contains the name of each scenario and the description. Does anyone know the table name or know how I can figure out what the table name is? Thanks Skip Ford
-
Many of my programs use the write to measurement file.vi or the write to spreadsheet file.vi and save the output data as a standard tab-deligniated spreadsheet, .lvm file. My question is if there is a way to make an incripted file so that it is save