What do i do if my ipod's screen blanks out and wont get off the apple logo?
what do i do if my ipod screen blanks out and wont get off the apple logo screen what do i do i need help asap!!!!!!!!!!!!!!!!!!!!
See Here...
iOS: Not responding or does not turn on
Try this First... You will not lose ant data...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
If that does not work... try letting the battery fully drain.
Then Charge for an Hour and try the suggestions again.
Similar Messages
-
What do i do if my ipod touch screen went white and wont turn off?
what do i do if my ipod touch screen went white and wont turn off?
- Try a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Connect to computer and restore if it appearsin iTunes.
- If screen still white let the battery fully drain. After charging for an hour repeat the above. -
i was trying to delete some songs from my ipod. so i plugged it into itunes and it froze. i help the home and menu button to reset it and now its stuck on the apple logo. i plugged it back into itunes, it updated the software i dont know if it restored the ipod. but now its stuck on the logo and it keeps going to the white screen and then back to the logo. what do i do?
Try restoring. Make sure you have a backup first.
-
my ipod touch 4g 8 gigs is not turning on it wont get past the apple logo its not frozen because it turns the screen black and the apple logo please help me
- Try a reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and try to restore.
- See if placing the iPod in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- If the logo still show all the time, let the battery fully drain. After charging for an hour try the above again. -
it wont go off the apple logo, putting it in recovery and DFU mode dosent change a thing, how can i fix it?
See if you missed anything here
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my iphone 4 will not get off the apple logo screen.
I've been trying to rest it for several hours with no luck.
It also doesn't do anything when plugged into my mac,
itunes will not recognize it at all.
what should i do?
thank you !Try DFU Mode Restore. Open iTunes on computer, connect iPhone to computer, hold both Home and Power buttons for exactly 10 seconds, then release the Power button, keep holding the Home button, for about 20 seconds until iTunes recognizes iPhone in Recovery Mode. Then click the Restore button of iTunes.
-
my ipad 1 isnt being picked up by my computer it also charges very slowly and never gets past the apple logo on startup what should i do
my ipad 1 isnt being picked up by my computer it also charges very slowly and never gets past the apple logo on startup what should i do
-
My ipod froze and wont go past the apple logo
my ipod froze so i turned it off, then it turned on and now wont go past the apple logo i have tryed holding down the lock and the home screen button in together and it just restarts and stays on the apple logo, i managed to put it into disk mode, where it comes up with the conect to itunes picture, but my computer is not finding/reconising it, so there fore i can not restore it, what do i do? please help!
How do you put it on disk mode?
-
Ipod touch keeps on restarting, never get past the Apple logo
Hi
I have a first generation ipod touch.
Since last week, as soon as I unplug the ipod from my macbook, it keeps on restarting and never get past the apple logo, until the battery empties out. But, when it is connected to my computer, it works just fine. I tried to restore it two times, but the same thing happens. I think it is too late to return it to the store: any idea what I should do with it ? Thanks for your help !Hello, Welcome to Apple Discussions.
Is there any reason it is to late to go to the store and return it? Posted below are your service options for your iPod Touch if you are still within your warranty.
http://www.apple.com/ca/support/ipod/service/faq/ -
My ipod 5th gen ios 7.0.6 crashed and keeps going from the apple logo, going to a black screen, back to the apple logo, then back to the black screen and so on. Furthermore, my laptop doesn't recognise that the iPod is connected. What do I do?
Please help me out as this is very irritating. This has been happening for the last 20-30 minutes. It had roughly half battery left.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I wanted to restore my ipod touch 4G, but everytime it is restoring with the apple logo, the screen goes partially white and my itunes says "error 9"... what should i do?
plz answer me~Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
http://support.apple.com/kb/TS3694#error9 -
I just jail broke my iPod and its stuck on the apple logo what should i do?
i just jail broke my iPod and its stuck on the apple logo what should i do?
The same thing happened to me. I assume it is stuck in an endless loop of restarting. You have to put it in connect to iTunes mode (http://www.youtube.com/watch?v=rm2D7-PCTaw) then restore your iPod. Hope it helps!
-
I recently "Erased all content and settings" on my iTouch and during the reset, it ran out of battery and it has been the apple logo and a loading symbol on the screen for 2 and a half days now. What do I do?
I did drop it from about 4 and a half foot during the reset so I don't know if that has broken it.See if placing the iPod in Recovery mode will allo iTunes to see the iPod so you can restore it.
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Can someone please help with my issue listed - My ipod 4G wont go past the apple logo when I turn it on - it will stay on the apple logo for few min, then blanks out and back to the apple logo. Tried reset option/troubleshoot several times. Also wont show up on computer at all when I plug in to USB.
Any tips are very much appreciated.Place the iPod Touch into DFU mode. This will be similar to what the factory would do to install the iOS onto new iOS devices.
Placing it into DFU mode will allow you to "format" and install the current iOS for that device.
To place your iOS device into DFU mode.
First connect you iOS device to you computer.
Open iTunes if not already open
Now turn off your iOS device using the power swipe.
Press the home and sleep button on your iOS device for 10 seconds.
Release the sleep button but carry on holding down the home button. For another 10 seconds.
Your iOS device should now be on DFU. Click on restore and iTunes will download the latest iOS for your device.
Hopefully that sorts it if not, you will have to go to a service centre or call Apple Care up and get them to collect it and repair it. (replace it) Or go into an Apple Store. -
I put my iPod charging, but it wont charge. The Apple logo appears on the screen for five seconds and then it goes off again. Afterwards, it does it again and again and again. I can leave it 1 hour or day charging and it will be doing this the whole time. What should i do????????????????????????????????????????????????????????????????????????????? /
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
and
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
How can I get properties of global virtual channels using DAQmx?
I'm using DAQmx with VB6. In my app, I would like to be able to present the user with a list of available predefined channels to select from. I can use DAQmxGetSysGlobalChans to get a list of the channels, but I need a way to sort out which of these
-
Disappearing Photo Albums in iWeb
I've seen so many posts on this topic here and elsewhere, but it never seems to be resolved. I had just added a new album to an iWeb created site this morning and though it was working correctly before this, now all of my albums are not showing up in
-
IPad browser is in Chinese , any website is in Chinese ... How do I change this back to English. GTR
iPad browser is in Chinese , any website is in Chinese ... How do I change this back to English. GTR
-
Hi friends i have to query in reports9i Query 1. SELECT g.id as challan,g.issue_date,gd.item_type,g.sale_order_id,g.supplier_name,g.prod_name,g.colour,g.xs,g.s,g.m,g.l,g.xl,g.pcs,g.issue_for FROM gin g,gin_detail gd where g.id = gd.id and g.id = :p_i
-
Need ur valuable suggestions on performance in sap BI
Hi All, Hope every one is doing great. Need ur valuable suggestions on performance in SAP BI. 1. what is meant by DB partitioning, in which scenario we use it and what the steps to do this task. 2. Navigational attributes are use when v want to make