What do i do if nothing is working to recognize my iphone 4s., what do i do if nothing is working to recognize my iphone 4s.
i tried every thing to get it to reconginze i am clueless any advice?
Perhaps this discussion may assist
https://discussions.apple.com/docs/DOC-6562
Similar Messages
-
I have a Macbook with OS 10.6.8 using Itunes 10.4.1 to sync my Iphone4. The itunes do not sync my contacts ... No error messages .... nothing ... just do not work ... However, It is working for apps, calendar and email. Does anybody have a clue what is going on ? tks
There is also an option to reset all data on the device with the next sync.
MJ -
Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the problem
Your answer is likely in Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support If you are familiar with this document, please re-read it and I suspect you may find something you either missed or are doing incorrectly.
-
Hi i upgraded from lion to mountain lion to day on my mini mac,Since the upgrade i am no longer getting sound through my HDMI cable which was working fine on lion Checked the midi audio settings and system preferences to out on HDMi nothing no sound whats so ever.Any one any ideas?
I use a samsung TV for my monitor via HDMI.Tried all the system Audi setting nothing .Head phone and internal speakers are fine.Similar issue; Audio was working fine on Lion, now not on Mountain Lion. Have a Macbook Pro early 2011 with AMD Radeon HD 6750M, connected by thunderbolt through a Lacie LBD to a mini-displayport to HDMI adapter (n.b. same problem when not going through the LBD) to a Pioneer VSX 521 AV receiver. For me when I go into audio Midi settings all the volume sliders for the displayport device are greyed out and at zero. But when I click 'configure speakers', it's able to send out the test signals to each speaker. Part of the problem could be that I'm not getting the option to put out 6channel sound, only 2 or 8 channel. Since my system is Dolby 5.1, and I only have 6 speakers, I would have expected the 6ch option to be available. But I imagine there's more to it than that. Elsewhere someone has suggested playing with Remote Interactive over HD on an Onkyo device; I'll see if there's something similar on the Pioneer that can be changed. Any other suggestions welcome.
-
My Ipad 2 is not working. Is not turning On. I dont' know what's happening. I'm trying to turn it on and I have no answer. Screen is out, nothing come to the screen. Battery is ok at 60% charged when I turned off last time, and after minutes when I turned on, it not worked anymore. If somebody have an idea what may happenning, please let me know.
I don't know what yu mean by "screen is out" but try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
I have a question. For the past week I have not been able to access my iTunes app it always kicks me out. I've turned it off and on and still nothing. I was wondering how can I get it to work or what should I do. Thank you
You need a computer with iTunes and an internet connection
Try:
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?
I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?
-
Tried charging my 2009 MacBook Pro but the green light won't turn on and now my computer won't turn on (it was working right before I attempted to charge it!) what do I do????? Even tried using another charger I had for it and nothing. No green light. Computer turn on. Now what??? Help!
QUOTE: "No green light. Computer turn on."
What? so were you able to turn on the computer with the new plug? does it give you any other light? amber/orange light? -
I am trying to update my itunes and iphone. Everytime I trie comes out a message about 'key access'. I've done all the steps from the support and nothing worked out. I cannot unistall and now I can't open it anymore also. What should i do, please?
Isn't that only used when a PC will not boot?
What options does booting with this give me?
Thanks
JK MCP
Hi,
USB recovery disk was used to recover your system when it encounter problem. You can try to use it to fix your problem instead reinstall system. However, there is no method to keep your program whenreinstall system.
Roger Lu
TechNet Community Support -
My ipod touch is not turning on, even if i plug it in to the charger. I'am wanting to rest the passcode through my computer in hopes it will turn back on. So far nothing is working what should I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using (ex. ITunes or Safari to main screen) . Now, no reactions. When I press the button, it appears to be more indented then it was before. What should I do? Do I need to get it fixed or replaced, or is this a problem I can fix on my own? Whatever it is, I really need some advice. Thanks in advance.
Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
My ipod works great on my laptop but want connect to itunes on my desktop,,,i have rebooted ipod twice,,,rebooted pc twice,,
reinstalled new itunes,,,nothing happens,,,ipod does show up on pc,,,,i have deleted everything about itunes twice or more and reinstalled i
nothing works...need help......whats next,,,,,Se:
iOS: Device not recognized in iTunes for Windows
Note that you can only sync with one iTunes library/computer but you can "sync" music and videos from more than one iTunes library/computer.
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad -
my ipod is frozen nothing works i tried to restart it by pressing down the home button and power button at the same time but nothing works i was trying to get on my pinger app and it froze there all i see is the pinger sign its basically my life and i dont know what to do at this point any ideas on how i could get it going again?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I recently did the iOS 7.0.2 update, now I'm unable to purchase apps. "App could not be purchased at this time. Please try again later. ". I have tried a few of the suggestions and nothing has worked. Reset,change auto lock time on main screen, change language setting. Now what???
This sorted it for me:
Backup your iPhone to iCloud (I believe backing up to iTunes will work too). Now go to "Settings --> General --> Reset --> Erase All Content and Settings" to completely restore your iPhone to factory settings. Assuming you've backed up to iCloud, you'll be asked when setting up your iPhone if you want to restore from an iCloud backup. Choose that option and once your iPhone has restored itself from your backup, this annoying problem will finally be gone! (was for me anyway).
To restore from an iTunes backup, connect your iPhone to your computer, load iTunes. Click the File menu and select Devices > Restore from Back up. -
My Ipad2 suddenly will not print to my hp photosmart 5510 printer. Both are on same network. Both have most current operating systems and updatees. I tried everything and can not get to work. It was fine two days ago and nothing has changed. What can I do to print again?
Have you tried rebooting your router and iPad?
Turn off your router for 30 seconds and on again. -
So the left side of my iPhone isn't working at all and I even tried turning it off for 5 minutes about 10 million times but nothing is working. Any suggestions on what to do I need help like ASAP!?
Have you performed a reset? Tap and hold the Home button and the On/Off button for approximately 10-15 seconds, until the Apple logo appears. Release both buttons and await restart.
Maybe you are looking for
-
In Pages (iPad) how do I edit text in a table?
I made a Table in Pages. I put text on each cell of the table. One of the cells has the following text: "The Ukraine is an independent nation, a former client state of the Soviet Union, which is struggling with the decision of whether to join the E
-
Hello, The Scenario is Idoc-file, we are generating XML file at target. The requirement is to have IDOC number in file name eg. "File_IDOCNUMBER_datetimestamp.xml". but in target file structure we have no separate field to map the IDOC number. Kinldy
-
Autoviewer slideshow in iweb- transparency?
Hi guys, Does anyone know how i can make my autoviewer slideshow have a transparent background so the page behind shows through around the photos? Right now the frame colour and background colour in the webexport options are: background 181818 and fr
-
hi, i am trying to read and update the CLOB and BLOB datatypes in my entity bean. within an ordinary java class the same code works well. but when i deploy the bean with same code to read/write LOBS in weblogic 5.1, following exceptions are thrown, w
-
I installed IE 8. Suddenly when I click a thumbnail in bridge, IE interferes and opens a window that asks if I want to download this file. I've never seen this before. If you have and know the fix, please let me know. Thank you!