What do I do when CS5 Bridge blocks PS CC install?

Bridge is currently not active/running on my computer, however when PS CC tries to install, Bridge's .exe is somehow interrupting the PS install and I get an error message instructing me to close Bridge. However...obviously Bridge _isn't_ actually running.
I don't know what to do and Adobe's help line is currently closed and I was hoping to install PS tonight.
Thanks!

Great!
Thanks.
Restrated install...last time it didn't hit the Bridge.exe until halfway through the install so I don't actually yet know if that solved the problem, but I did locate and terminate the Bridge.exe process in Task Manager so I hope that addresses it.
Thanks again

Similar Messages

  • HT201413 what should i do when the iPhone blocked ?

    what should i do when the iPhone blocked ?

    Blocked how? What are you seeing that informs you of this condition?
    GB

  • TS1424 What does it mean when your trying to update or install your app and it says "unable to download at this time retry or done???

    When trying to update my games I kept getting interrupted with a message saying "cannot download now" then you choose retry or done. What is going on??

    Have you tried leaving it for a while and trying again.

  • What should I do when I get failure to instal error message?

    what should I do when I get a failure to install error message?

    Could you please provide some more details like Product you are installing,  OS details etc.

  • Why can't I do batch actions from CS4 or CS5 Bridge now when I could before?

    Something has changed in my functions for doing batch actions in Bridge.  In CS5 Bridge I try to do a simple batch action of saving a DNG file as a jpg and closing the file.  When I attempt this I get a message saying 'The command "Save" is currently not available.
    I try to do the same thing in CS4 Bridge.  I go to the Tools menu and look for Photoshop in the drop down menu but it's not there.  This is how I do batch action processing with my Windows version of CS4 Bridge.  I am confused about what has changed when I was able to do batch actions routinely in CS4 and CS5 Bridge on my Mac.

    Something has changed in my functions for doing batch actions in Bridge.  In CS5 Bridge I try to do a simple batch action of saving a DNG file as a jpg and closing the file.  When I attempt this I get a message saying 'The command "Save" is currently not available.
    Batch using tools menu from Bridge to reach Photoshop should work as expected in both CS4 and CS5. If not then there is something wrong on either your system or install.
    Go to Bridge CS5 preference and look for the section Start Up Scripts and see if there is still a Start Up Script for Photoshop CS5 present and with a checkmark in front for activation. If not try first to restart bridge holding down option key and choose refresh preferences. This should retrieve the original Start Up scripts again.
    If your command save as is not available check the action and see what the save path for that acton is. If it is a copied action from an other system changes are that it still contains the save path for the old drive and if the script can't find it it provides a warning message.
    Also check if the drive you save to has both read and write permission.

  • File size variations in Cs5, Bridge, & Mac when opening D800e raw files

    I am getting extreme variations in file size when I open my D800e nefs in photoshop cs5, & Bridge. When I highlight the same nefs on my Mac(10.6.8) & "get info", I get another file size.  D800e files are about 103 MB each at 8 bit, but can vary dramatically when I open them in Bridge or Cs5. Any ideas? Thanks!

    Thank you for responding. I understand what you are saying. After more attempts at resizing nef files into tifs, and then restarting my computer, everything seems to be ok. However, when I make a four shot stitched pan with the D800e, I encounter the same problem even after downsizing to a more manageble file size. Each photo in the pan is originally 103MB. After resizing the 4 shots to 30MB each, I end up with a pan that is about 75MB in CS5 after cropping. When I highlight this pan & "get info" on my Mac desktop, the image size is 300-400 MB. I can ignore this for personal use, but if I have to send it to a client via the internet its a problem. I have made stitched pans with my D3s with no problem at all, so I guessing I have to switch cameras when I want to stitch shots together. If anyone has any more comments feel free!

  • CS5 Bridge crashes when trying to create a new subdirectory

    Bridge version 4.*.*, Windows 8.
    Was working perfectly for months then tonight decided to crash when I try to create a new subdirectory.
    When I try to create the subdirectory it closes and I get a window telling me Windows is trying to find a solution.
    What is the issue have how do I get a remedy.
    I thought OK, the application got corrupted, so I will download and install a new version of bridge.
    That seems to not be possible as there is no Bridge for CS5 download on the download menu.
    What is the solution?  Thanks.

    Bridge version 4.*.*, Windows 8.
    Was working perfectly for months then tonight decided to crash when I try to create a new subdirectory.
    When I try to create the subdirectory it closes and I get a window telling me Windows is trying to find a solution.
    What is the issue have how do I get a remedy.
    I thought OK, the application got corrupted, so I will download and install a new version of bridge.
    That seems to not be possible as there is no Bridge for CS5 download on the download menu.
    What is the solution?  Thanks.

  • HT4259 I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2.  But no matter what I do or try, it doesn't work.  What does happen is my internet gets block somehow when the Express looks like it's set up and 'green' - no in

    I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2.  But no matter what I do or try, it doesn't work.  What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good.  Once I disconnect the Express, everything is good again.
    I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension.  Most of the time I get an error trying to update the Express.  But when it seems to be set up perfect, the entire house can't get to the internet.  Just when it looks right, it is so wrong.
    If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it.  I'm left to the conclusion that the Express is faulty.  I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).

    I finally got it working.  I was trying to set it up ethernet.  My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode.  So everything I initially tried always resulted in 'wireless'.  Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it.  So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
    So here's the weird part.  When I finally tried 'continue' (vice manual), I would get 4 options.  One would be 'ethernet' extended.  So I would select it, it gave me green lights, all looked good, and still the same problem.  This is when I got frustrated.  I thought I had exhausted all possible combinations.
    But somehow when trying continue again after another restore, I only got 3 options.  One was the same ethernet extended option (can't remember what the missing 4th one was).  And this time it worked - it gave me the big green circle with the checkmark saying it was successful.  I don't know what I did different, but I know now that it won't work if 4 options come up to choose from.  It will work if only 3 options come up.  And success if only verified by the big checkmark.  Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
    As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it.  Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with.  It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
    Thanks for the response.  I really do appreciate it.
    Aiport Extreme Gen5 - internet access and router
    Airport Express Gen2 - connected via ethernet, extending my wireless
    - configured while connect directly to the Extreme, but now on a switch (16-port hub)
    Using Airport 5.6.1
    1) Restore Defaults from Base Station menu
    2) Following restart, Select Continue
    3) Of the 3 option presented, select 'ethernet.... extend network...'
      - if 4 options are present, may not work
    4) Wait for the green circle with the big white checkmark.
    5) Connected Express to the switch where a cable went to other end of house - works.
    Dead-zone went from 2mbps to 24mbps.
    I probably spent 4 hours chasing my tail in anger.  The correct way took about 5 minutes total.
    Thanks again.

  • HT1414 Hello, do you know what I can do when my Iphone is blocked with the apple appearing ? I cannot enter into the phone and I don't know what to do ? Thank you

    Hello,
    Do you know what I can do when my Iphone is blocked with the apple appearing ?
    I cannot enter into the phone and I don't know what to do ?
    Thank you for your help
    AMGSO

    Basics from the manual are restart,  reset, and restore.
    Have you tried these?

  • Trying to install Adobe Premiere elements 12.  When it gets to "Installing required Shared Technologies" stage it gives errror "Setup has detected that Adobe Bridge CS5 (Bridge.exe) is currently in use.  Please close all running exe(s).  Nothing is runnin

    question:  Trying to install Adobe Premiere elements 12. When it gets to "Installing required Shared Technologies" stage it gives errror "Setup has detected that Adobe Bridge CS5 (Bridge.exe) is currently in use. Please close all running exe(s). Nothing is running when trying to install this, have been through this process several times. Found undertroubleshooting to delete files PDAppFlex.swf and PDAppFlex-app.xml and have done that as well. Any help will be greatly appreciated

    Try Error "Installation cannot continue until... Adobe Bridge is closed" | Installation | CS5

  • What do i do if something is blocking any disk from going in to my disk drive when i have no cd/dvd's in my macbook pro?

    what do i do if something is blocking any disk from going in to my disk drive when i have no cd/dvd's in my macbook pro?

    Bring it to an Apple store or AASP and have them check out the optical drive.

  • When you recieve a call what does it mean when callers name says blocked?

    when you recieve a call what does it mean when callers name says blocked?

    It means that the owner of the phone number has chosen to block there info from caller id.

  • After upgrading to OSX-10.8 (mountain lion) CS5 Bridge Crashes when opening.

    I know others have commented on this "issue". I also notice that elsewhere on the web, there are reports of it being a Radeon ATI issue. I've tried repairing links / permissions, tried re-installing the latest Bridge update... All to no avail.
    PLEASE help Adobe. My CS5 Bridge is useless now. I'm seriously contemplating restoring 10.7.
    Process:    
    Adobe Bridge CS5 [3373]
    Path:       
    /Applications/Adobe Bridge CS5/Adobe Bridge CS5.app/Contents/MacOS/Adobe Bridge CS5
    Identifier: 
    com.adobe.bridge4
    Version:    
    4.0.5.11 (4.0.5.11)
    Code Type:  
    X86 (Native)
    Parent Process:  launchd [221]
    User ID:    
    501
    Date/Time:  
    2012-07-31 17:53:48.898 +1000
    OS Version: 
    Mac OS X 10.8 (12A269)
    Report Version:  10
    Interval Since Last Report:     
    5671 sec
    Crashes Since Last Report:      
    10
    Per-App Interval Since Last Report:  34 sec
    Per-App Crashes Since Last Report:   10
    Anonymous UUID:                 
    1157DD9D-250F-46CA-B3AE-1988FE0DDCCE
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x000000000956a000
    VM Regions Near 0x956a000:
    shared memory     
    0000000009561000-000000000956a000 [   36K] r--/r-- SM=SHM 
    --> shared memory     
    000000000956a000-000000000956b000 [
    4K] rw-/rw- SM=SHM 
    VM_ALLOCATE       
    0000000009571000-0000000009573000 [
    8K] rw-/rwx SM=PRV 
    etc...

    Reposting myself here:
    Have you made your user Library-folder visible in Finder?
    I did that in the Terminal and shortly after that the crashes started for me.
    I just updated to 10.8.2 and that made the user Library-folder invisible again.
    At the same time Bridge started behaving properly.
    Not saying that's anything other than a coincidence.

  • CS6 Beta Modifies CS4 & CS5 Bridge File Associations (W7 Pro 64Bit SP1)

    Symptoms:
    After installing CS6 including bridge CS6 onto a W7 pro 64Bit Machine with SP1.
    The File associations in the existing copies of CS4 and CS5 bridge are updated to make the CS6 Beta the default programme for opening the majority of file types from either CS4 or CS5 bridge.
    When right clicking ona file from CS4/5 bridge only the option of opening in CS6 is presented
    Expected Bahaviour:
    I expected that CS6 would be the default programme launched from CS6 bridge but that CS4/CS5 would remain the default programmes launched from their own versions of bridge.
    Setting CS6 as the default file association in previous versions of bridge makes no sense at the Beta stage, as it interupts a clean migration back to existing workflow.
    I would also question the value in not preserving the existing file associations in prior versions of bridge in the final CS6 release, as there are cases when it might be desirable to go back to a previous version of CS, in which case opening that version of bridge and launching directly into the prior versions of CS is very desirable.
    Is there anyway to quickly restore the previous associations in CS4/CS5 bridge and be sure that they are exactly the same as prior to the CS6 beta install ?

    Sorry for the noise. I misunderstood your depth of knowlege and what you had tried. I also committed the sin of not testing the procedure all the way through because I did not want to change the association on my computer. I get the same behavior.
    Guess for .jpg
    Registry shows for .jpg:
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.jpg\UserCho ice  Progid = Applications\Photoshop.exe
    HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Applications\Photoshop.exe\shell\open\command  (Default) = "C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Photoshop.exe" "%1"
    UserChoice seems to be added when I made the association choice. Note that it points into Applications with a non-version specific Photoshop.exe. Within HKLM\....\Applications there is only one Photoshop.exe -- no version -- and that entry points to CS6.
    I believe that explains why the browsed to association is CS6. It does not explain why it would be set up that way. Probably has something to do with Windows special handling of certain file extensions. Beyond my depth and tells me I am not going to find a solution.

  • Jpeg thumbnails too dark in CS5 bridge

    All of a sudden my jpeg thumbnails appear very dark and muddy in CS5 bridge. Such images are of normal brightness when opened in Photoshop proper.
            Equally puzzling is when a jpeg image is then "saved as" back to the same folder as a TIFF (for example) the jpeg looks dark but the TIFF version of the same file looks correct. RAW files still look correct.
    This seems to be a recent problem as jpeg images I processed a few ago weeks ago still dislay normally in bridge.
    I've tried purging the folder cache without effect. Thumbnail quality is set to "always high". I feel I may have accidentally altered a setting but cannot think wghat it might be. Please help.

    Since my posting I have realised this problem is confined to images from the Nikon D800 camera ONLY. Jpegs from my other Nikon cameras display normally.
    That does indeed not indicate to a cache problem alone. But you stated in your earlier post purging cache did solve the problem temporarily hence my idea about this solution.
    I still think you should try to move the files to another new folder but you have provided us with very less detail about what computer, systemOS etc you are using and if you have the correct ACR version for support of your Nikon D800 which I believe is ACR 6.7 (in Photoshop use menu Photoshop / about Plug ins / Camera Raw to check which version you have.
    Just to say I shoot RAW and batch convert to sRGB jpeg from ACR. It doesn't matter what size option I save to from ACR.
    I don't follow this workflow, shooting Raw provides you with all details and data from your sensor but you need to go through them for fine tuning the settings. Shooting jpeg means you loose a lot of those details and let the camera software decide to fine tune for you (in a nutshell, it is a bit more complicated…)
    Shooting Raw and without change settings and fine tune just convert these files to sRGB jpeg is in my opinion pointless. You better use the option to shoot Raw + jpeg and use the jpegs out of camera for this purpose.

Maybe you are looking for