What do i do when i forget my passcode

what do i do when i forget my passcode

You will need to Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
http://support.apple.com/kb/TS3281

Similar Messages

  • What do you do when you forget your passcode on iPod touch

    what do you do when you forget your passcode on iPod touch

    Forgotten Screen-Lock Passcode
    Connect the iOS device to your computer and try to make a backup
    iOS: How to back up
    Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
    If recovery mode does not work try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up    
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store    

  • What do you do when you forget your passcode

    i forgot the password to my iphone and i have no idea what it is.What should i do?

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

  • What can you do when you forget your iPod password and it locks you out?

    What can you do when you forget your iPod passcode and it locks you out.

    http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf

  • What do i do when you forget your lockscreen password

    What do i do when i forget my lockscreen password for my ipod?

    Restore, if iTunes will let you.  Everything except the password will be restored.  Connect via cable to the computer that you use for sync.  Be forewarned that it takes a long time.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • What do i do when i forget my secerity qustions?

    what do i do when i forget my secerity questions?

    You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (105116)

  • What do i do when i forget my sercurity questions?

    what do i do when i forget my sercurity questions?

    Alternatives for Help Resetting Security Questions and Rescue Mail
         1. Apple ID- All about Apple ID security questions.
         2. Rescue email address and how to reset Apple ID security questions
         3. Apple ID- Contacting Apple for help with Apple ID account security.
         4. Fill out and submit this form. Select the topic, Account Security.
         5.  Call Apple Customer Service: Contacting Apple for support in your
              country and ask to speak to Account Security.
    How to Manage your Apple ID: Manage My Apple ID

  • What do I do when I forget my pass code

    What do I do when I forget my passcode

    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • What do i do when i forget my password?

    What do I do when I forget my ipod password?

    Connect the iPod to the computer and restore via iTunes. If necessary, place the iPod inRecovery Mode to allow the restore.

  • What should i do when i forget my reset password

    What should i do when i forget my reset password??

    With 10.4, 10.5 or 10.6 put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.
    With 10.4, 10.5 or 10.6 if you don’t have an install disk check this article. http://www.macyourself.com/2009/08/03/how-to-reset-your-mac-os-x-password-withou t-an-installer-disc/
    If you're running 10.7 Lion check this article
    http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/
    With 10.8 or 10.9 restart holding the Command and R keys, then from the drop down
    of actions, choose Terminal.  When Terminal opens type:
    resetpassword
    and press enter.
    You will get a reset password window from which you can select the user you want to reset, the admin account in your case.  Type a new password twice, do not do anything with the hint box.  Click Save, then confirm you want to do this reset.  Then click apply to the user's home directory, and click the apple in the left corner, and choose Restart.

  • What do you do when you forget your sercuirty question anwser?

    what do you do when you forget your sercuirty question anwser?

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, and filling out and submitting this form.
    (96762)

  • What do you do when u forget your apple security questions?

    What do you do when u forget your apple security questions?

    Alternatives for Help Resetting Security Questions and Rescue Mail
         1. Apple ID- All about Apple ID security questions.
         2. Rescue email address and how to reset Apple ID security questions
         3. Apple ID- Contacting Apple for help with Apple ID account security.
         4. Fill out and submit this form. Select the topic, Account Security.
         5.  Call Apple Customer Service: Contacting Apple for support in your
              country and ask to speak to Account Security.
    How to Manage your Apple ID: Manage My Apple ID

  • HT201363 what do i do when i forget the answer to my security question?

    what do i do when i forget the answers to my security questions?

    You need to ask Apple to reset your security questions; ways of doing so include clicking here and picking a method for your country, and filling out and submitting this form.
    (96060)

  • What do i do if i forget my passcode and the phone disable its self

    what do i do if i forget my passcode and the phone disable its self

    Do as the manual instructs and restore.
    iPhone User Guide (For iOS 5.0 Software)

  • What is the url when you forget your password?

    What is the url that needs to be entered when you forget your password to retrieve it?

    Can I just point out the obvious? (Well, it is to me at any rate!)
    If there was a URL that "needs to be entered" (I assume you mean a URL to be visited), in order to retrieve your password when you forget it, wouldn't that enable those people you know and wish to prevent getting in to your iPod (which - presumably, is why you put the password on it) to go to that same URL, get your password and use it to get into your Touch?
    Or is it me?

Maybe you are looking for

  • Spend a lot of time to insert

    Hi, I have a Insert which spend a lot of time. Is a simple insert: INSERT INTO TFE002 (X_NOMCORRECTO,C_TITULAR,X_APPCORRECTO,X_ANOVAL, C_MODULAR,X_APMCORRECTO,C_USUARIO,C_POBLACION, C_FORMATO,C_LOTE,C_SECUENCIA,C_PERIODO, X_T,X_NI,X_GRADO,X_SEXO,X_LO

  • Error about base class not being found in custom class when extending

    I have gone through the process of extending the base View Object oracle.apps.icx.lov.server.ExpenditureTypeNoAwardLovVO. My extension object is: snl.oracle.apps.icx.lov.server.SnlExpenditureTypeNoAwardLovVO. The extension was done to change the quer

  • Comparing dates problem

    Hi, When I try to execute a query that contains: WHERE to_date(CALL_DATE, 'dd.mm.yyyy') = to_date('01.02.2005', 'dd.mm.yyyy') I get an empty table when using JDBC but it works when using an editor (like SQL Navigator). Any ideas. Thanks

  • Installing Essbase Adpater in HAL7.0

    <p><span style=" font-size: 8.0pt; font-family: Verdana;">Iveinstalled HALv7, and then installed latest Essbase Adpater forversion 6.5 and above.<br><br>After connecting to sever, I drag Essbase icon into new project Iget Error Message:<br><br>"java.

  • Problem to import wmv files into imovie 08

    I have big problems to import my wmv files into imovie on my brand new imac24" have installed flipmac pro , and they can not help me on help desk. I have also upgraded Quicktime to Pro. Files look grey so can not highlight . Trieed to open in Qicktim