What do I do when I'm trying to access another library on my home network and it tries to access it but then just stops.

I'm trying to setup the library sharing on my home computers and one computer will start to access the other library and then just abruptly disconnects the library before it finishes downloading.  Any suggestions?

Go into your system preferences and click the startup disk icon then select your Mac HD. 

Similar Messages

  • I tried to put ios 7 on my ipad 2 but then it took me to recovery mode then I got the new itune and tried to restore it but then it stops in the middle

    I tried to put ios 7 on my ipad 2 but then it took me to recovery mode then I got the new itune and tried to restore it but then it stops in the middle

    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • I have uninstalled and reinstalled itunes several times bc i cannot access the store.  still unable to....tries to access but then just stops. no error.  please help

    i have uninstalled and reinstalled itunes several times bc i cannot access the store.  still unable to....tries to access but then just stops. no error.  please help

    Try this:
    Go to command prompt (in windows XP, START/All Programs/Accessories/Command Prompt)
    Type in following:
    Netsh winsock reset
    Hit "Enter" key.  Restart computer.
    Now check & see if iTunes stores is back to normal.
    If not, try temporary uninstall your Security software & see if it works.

  • What do I do when I am trying to install my new version of itunes, and it says this: The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified.

    What do I do when I am trying to install my new version of itunes, and it says this: The installer encountered errors before iTunes could be configured. Errors occurred during installation. Your system has not been modified.

    I had this, and after a large number of fruitless attempts, I had to reload Windows, which solved it. This was of course a real pain, but I had to do it since updating iTunes was necessary in order to get the new iOS version. But before doing such a drastic thing, you could try to restore Windows to a previous point in time by picking a restore point. This of course presumes that you really have some issues with your Windows (which I had) and that you can make a decent guess on when the system was ok (which I couldn't), i.e that you can decide a good date to restore to.

  • I need to retrieve files from my iPad but I forgot my password. I tried to restore it but then it said I had to turn off Find my iPad on my iPad. I can't do this because I can't get into it. What do I do?

    I need to retrieve files from my iPad but I forgot my password. I tried to restore it but then it said I had to turn off Find my iPad on my iPad. I can't do this because I can't get into it. What do I do?

    If the iPad was running iOS 7,  iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT5312 yeah i cant set up a rescue email to change my security questions because I dont remember the security questions. i did this a while ago i honestly dont remember. i tried to contact support but they just told me what you just told me. i

    I can't answer security questions because I dont remember the security questions. i did this a while ago i honestly dont remember. i tried to contact support but they just told me what you just told me.

    We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
    How did you contact Support ? You should be able to contact them in your country via this page and get your questions reset : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

  • Hello. When i'm trying to change my background, it just all freeze. Can you tell me why?

    When i'm trying to change my background, it just all freeze. I had tryed to turn the computer off, and it still just freeze in the background setting. Can you tell me why?

    Hello Wyodor,
    thanks for your reply on my question.
    You are wright the index file is 308 KB.
    And offcourse that I delete my files and documents is not an Iweb problem, but because my English is not that good, that I thougt I try to tell the whole story, and hope people can read trough the lines.
    Why I didn't use Iweb to upload to the server is because the server company recommanded to use file zilla. And I am a nobody with this kind of things, so I did exactly what they tell me to do.
    No, i did not make a backup of Iweb and the domain file, but reading other messages on this forum showed me that I can maybe try to make empty the cashfile (?)
    and otherwise I have bad luck and have to make my website again. Offcourse I have a lot of examples from all the pages (copied from the local map to my USB stick) and my website is aprox. 15 Mb, (not so big) so it will cost me a few nigths.
    But I'm still hoping on a miracle :-)
    greetings Lasource

  • When I start iPhoto it says the library needs to be updated and when I try to do that it says that the program is in use or unreadable. This is the the first time I have ever launched it. What do I do?

    When I start iPhoto it says the library needs to be updated and when I try to do that it says that the program is in use or unreadable. This is the the first time I have ever launched it. What do I do? It keeps going around in circles. I have tried re-starting the computer and re-launching the program holding down the option-command keys. Neither helped.

    What version of iPhoto are you using?
    This is the the first time I have ever launched it.
    Does that mean there are no photos in the library? If so move it to the Trash bin in the Dock and launch iPhoto again.
    If there are photos in the library do the following:
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button,                         
    and select the library you want to add from those in the selection window.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
    Note 2:  Your current library will be left untouched for further attempts at a fix if so desired.
    OT

  • As I downloaded new software upgrade in my iPod nano 7 th gen and also new iTunes upgrade then all data on my iPod got erased and now when I am trying to sync it again then sync button is disabled on the windows screen . Kindly help

    As I downloaded new software upgrade in my iPod nano 7 th gen and also new iTunes upgrade then all data on my iPod got erased and now when I am trying to sync it again then sync button is disabled on the windows screen . Kindly help

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • I've iphone 3GS. ios 5.1.1 i've a problems that it turnoff itslef. when i'm trying to turn it on. it just appear apple logo then go to black . keep trying till gives me battary is empty and must charge it. once i plug in it. its open and i found the batta

    i've iphone 3GS. ios 5.1.1 i've a problems that it turnoff itslef. when i'm trying to turn it on. it just appear apple logo then go to black . keep trying till gives me battary is empty and must charge it. once i plug in it. its open and i found the battary as it 70 % for example( not empty ) if anyone try to call me its appear to me turn off but doesnt give him the mobile is turn off . its rining. please advice

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Has any of this been tried?

  • My iphone3gs has died, it just started to vibrate and carried on for several minutes, then just stopped . Now I cant switch it on or off I just have a black screen It was fully charged when it happened and since then I have tried holding down the sleep bu

    My iphone3gs has died, it just started to vibrate and carried on for several minutes, then just stopped . Now I cant switch it on or off I just have a black screen It was fully charged when it happened and since then I have tried holding down the sleep bu

    iOS: Unable to update or restore

  • HT1386 As soon as I plug my iphone4 (running 4.3.3) into my pc, it appears in the left hand column and the little wheel starts turning. Then it stops after a few seconds and itunes freezes. I have tried everything. Can anyone help. Thanks

    As soon as I plug my iphone4 (running 4.3.3) into my pc, it appears in the left hand column and the little wheel starts turning. Then it stops after a few seconds and itunes freezes. I have tried everything. Can anyone help. Thanks

    Hi Patrick,
    Yes, a very frusterating issue indeed. Someone else had mentioned a possible issue with real player, I tried getting rid of that and same issues. I even got completely rid of firefox for the moment. Guess what, problem still is persisting. I think this means it maybe something else altogether. I will go back to re-add firefox after I get this straightened out but now using Chrome for the moment.
    What I've also found out is that the sound can be restarted when I unplug and replug in the 3.5mm speaker cable from the audio output jack on the back of the computer. Any ideas?
    Thanks!

  • I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

  • When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can you please help me?

    When I delete com.apple.audio.SystemSettings.plist my audio/sound problems are solved. However when the file is replaced with another file, the sound is crappy and the quality is reduced. Can anyone please help me?
    Sincerely,
    Eric

    Run this when you have the problem and post the results here.
    EtreCheck
    This will tell us what is loaded

  • I get a download error message when I try to open my apps tab on my home network

    I get a download error message when I try to open my apps tab on my home network. But I am able to sign in to my account on the web. Do you know how to fix this?

    This is an open forum, not Adobe support... you need Adobe support to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

Maybe you are looking for

  • SSD drive will not connect using USB adapter

    Hello- I am having a problem with my CT250BX100SDI drive. It was fully functional in a laptop that I retired. I removed it and plan to use it as a external USB drive for backups.However I cannot reliably connect to it.I have tried a Win 8.1 laptop, U

  • Security: "Save As"

    Can I prevent a recipient from using a pdf file to create their own file by doing the "Save As" command?

  • Passwords not auto-filling

    Hello All, My passwords are no longer "auto-filling" the log-in fields as they used to. Could this be a result of my Options/Privacy/Clear History When Firefox Closes setting?? In addition, in the Options/Privacy/Settings/settings for clearing histor

  • Looking for disk I/O test for ASM?

    We are running oracle 10.2.0.3 on RHEL4 itanium 64 bit and we are using ASM for out database storage. IN our production environemnt the disk subsystem is an EMC clarion array but in our test environment our disk subsystem is an HP MSA storage. I am l

  • Receive error message on login to WIFI

    I do hope someone can help.  I have had my Playbook for more than a year now and am only now starting to work with it!!!  I know, crazy.  A couple of months ago I didn't have a problem accessing the WIFI (we were in the US at the time) now back in Ca