What do I do when I try to verify a second iCloud email account for iMessage on my iPad and I get an error message, Unable to verify because the email is already in use. Thanks for any answers.

My iMessages that I write on my iPad are not showing up on my other device, the iPhone 4. I went into the settings and tried to add the second cloud email address, however, I keep getting an error message saying that it cannot be verified because the email is already in use. What do I need to do get it working. I have two iCloud email addresses. Thanks in advance for your suggestions.

Hi,
Just wanted to say I found out the answer. I should have looked first to see if anyone else was having the same problem but I didn't.

Similar Messages

HT3275 I get the message that backup failed because the volume is already in use. Any ideas?

My Time Machine for my iMac has suddenly developed a problem: on repeated attempts to do a backup, it returns the message that the backup failed because the volume is already in use. The solution to the problem may well be simple and obvious, but it'll be a revelation to me and any help will be gratelfully received.

Have a look at Pondini's excellent information here...
http://pondini.org/TM/Time_Capsule.html
Perhaps here...
The Backup disk image ... sparsebundle ... is already in use.

New Ipad and cannot sync contacts; error message unable to load data class info from sync services; reconnect or try again later

new Ipad and cannot sync contacts; error message on Itunes - unable to load data class info from sync servies; reconnect or try again later

For Windows - look at this.
http://support.apple.com/kb/TS1567?viewlocale=en_US
For Mac - maybe this applies
http://support.apple.com/kb/TS3744
I just picked these out by going to the box to the right called - More like This.

Hi, I am looking for either an automator action/workflow or applescript that will locate a hyperlink by finding text within a webpage and click on that link. I need this because the url is constantly changing. Thanks for any assistance.

Thank you in advance!

What you describe can be set up with a non-printing button. A button can be set up to have any size and appearance you want. In the Mouse Up event of the button you can use something like the following:
// Create the string to display
var msg = "This is the first line of text with two carriage returns at the end.\r\r";
// Add some more test to the string...
msg += "This is the third line with a single carriage return at the end.\r";
// ...and a bit more.
msg += "This is line 4\rand this is line 5.";
// Display the text in an alert with an OK button
app.alert(msg, 3);
For more information on the app.alert method, see: http://livedocs.adobe.com/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/JS_API_AcroJS.88.135.html
There are a number of other ways to implement this type of thing, but see if the above approach works for you. If not, post again and we can make other suggestions.

I am trying to burn a CD and keep getting this error message: Burning disc failed because communication to the disc drive failed. (error code 0x80020022) Any suggestions??

Burning disc failed because communication to the disc drive failed. (error code 0x80020022) Any suggestions??

Sadly, that error has umpteen causes, sometimes the drive is going out, sometimes it's bad media, sometimes a slower burn works, & rarely a Cleaning Disc helps.
Bad File names can even cause it...
http://www.bbqiguana.com/2010/02/macos-x-error-0x80020022-trying-to-burn-dvds/

TS1424 I purchased an album from iTunes using my computer. All of the songs from the album are on my computer and play perfectly. When I try to sync the songs to my iPhone or iPad, I get an error message that says 3 of the songs can not be downloaded to t

I purchased an album from iTunes using my desktop computer. All of the songs from the album are on my computer and play perfectly. When I try to sync the songs to my iPhone or iPad, I get an error message that says 3 of the songs can not be downloaded to these devices. Any ideas?

Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

When I try to copy pictures to my iphone 4s I get this error message: Cannot copy item. The device has either stopped responding or has been disconnected. Any help?

When I try to copy a photo from my computer (windows 7) I get this error message: Cannot copy item. The device has either stopped responding or has been disconnected. Any help for this?

Are you syncing the photos using Itunes?
When you plug your phone into your PC, in Itunes under the picture tab you can sync photo and then choose the photos.
Look here more detailed instructions
http://support.apple.com/kb/HT4236

Face time no longer works for me. Lost my contacts even! Keep trying to change PWD and keep getting same error message: The server encountered an error processing registration. Please try again later. Can you advise? Thanks!

Face time no longer works for me. Lost my contacts even! Keep trying to change PWD and keep getting same error message: The server encountered an error processing registration. Please try again later. Can you advise? Thanks!

Face time no longer works for me. Lost my contacts even! Keep trying to change PWD and keep getting same error message: The server encountered an error processing registration. Please try again later. Can you advise? Thanks!

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, Mark

Unfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

Cannot save as PDF - "Could not save a copy as (filename) because the file is already in use..."

I have a number of PSD files I've created and I'm trying to save them as PDFs.
I can Save for Web and Devices, I can save as a .gif, .eps., and every other format I've tested, but I cannot save as a PDF. I get the error:
"Could not save a copy as (filename) because the file is already in use or was left open by another application."
I'm running Adobe Master Collection CS5 with Photoshop CS 5.5 (12.0.4 x64) on a Windows 7 64-bit machine.
I have a 928 GB HD with 697 GB free.
I have rebooted and tried saving the files immediately after I reboot. I have killed my virus scanner. I have killed a number of other possible culprits including Acrotray.exe and CS5ServiceManager.ext
I have run Process Explorer as recommended by Microsoft and found no applications using the file. I've also tried saving the file to my external hard drive and/or renaming the file with only rare luck.
Nothing seems to fix it.
The boards seem to suggest Adobe isn't taking responsibility for this and pointing it back to the OS or other software. I'm willing to believe them if someone can show me how/where to kill whatever process it is - but at this point, all my indicators point back to Photoshop.

Here is a clip from a past post where user could not drag and drop files to hard drive.
To my great relief I have now sorted this issue and offer the following as the Correct Answer. My sincere and grateful thanks go to Curt and Yammer, above, who have helped me so much in sorting this Windows 7 issue which is clearly very relevant to Bridge users also. Any slowness to grasp what they have been saying is down to me!
The key to solving this issue lies is understanding that in terms of Windows 7 Security, every internal or external hard drive, plus folders, sub-folders and files thereon has an OWNER. Also each OWNER has a certain level of PERMISSION to do things such as moving files to a different folder, deleting or re-naming them etc. If you try to do things that you don't currently have Permission to do, that is when you get an ‘Access Denied’ error message. Also your system has an Admistrator or Administrators and at the outset you need to ensure through the Control Panel that you are listed as one of them. .
If, like me, you didn't realise these things, (and why would you if Microsoft or your computer or hard drive suppliers couldn't be bothered to really make sure you knew about them), then trying to fathom the ‘Access Denied’ problem becomes a stressful and frustrating nightmare as I can testify having spent a week at it!
The steps that I took to resolve the issue and which I believe now constitute the 'Correct Answer' are as follows:
First make sure that you have Administrator rights on your system via the Control Panel
Next ‘right click’ on the Drive whose files you want to gain full access to, for example the drive that your pictures are stored on, and click on 'Properties'.
Under the Security tab you will see a list of Groups and Users on this drive and the Permissions that they have to do things.
Before doing anything to edit these Permissions, first click on the Advanced button. This opens another window with a tab showing the Owner of this drive.
Click on the Owner tab and if you are not already listed as the owner, make yourself the owner by selecting your name from the list. I believe it should appear there if you are an admistrator or user. (In my case at this stage the owner was initially shown as an obscure string of numbers and letters which I believe identified the drive when it was connected to the lap top I was using before I upgraded my machine)
Now be sure to check the box that says "Replace Owner on Subcontainers and Objects" and the click Apply. On completion of this step, the drive in question and all the folders, subfolders and files thereon should now be 'owned' by you. You could check this out by right clicking on a particular folder then clicking Properties > Security > Advanced > Owner. Your name should appear. So far so simples!
Now go back to the Security Tab for your drive (Step 2 / 3 above) and look at the Permissions you currently have. Your aim now is to allow yourself 'Full Control.' If you don’t currently have this level of permission click Edit, select your name on the list, check ‘Full Control’ and 'Apply' the change.
I think I'm right in saying that at this point whilst still working in the Drive directory you are now given the option of ticking boxes which allow you to, in effect, cascade the permission you have just granted yourself to all the files and folders on that drive. Tick the box to allow this and Windows should then take care of the rest.If I'm not quite correct here then in my particular case, for example, all my images were stored on my external drive. The top level, or 'parent' folder in which all my pictures could be found was the 'My Pictures' folder and I had created a number of folders and subfolders ('child ' folders) within that folder. The permissions I gave to the Parent folder – My Pictures – were cascaded down through the Child folders.
On completion of the above step I tested the result in Windows Explorer by dragging a few files back and forth between folders and it now worked perfectly - I was now able to move / delete / rename etc all files without now getting the dreaded access denied message. What a sense of relief! This meant that I could now open Bridge normally rather than having to right click it and 'Run As Admistrator' - albeit that is a very useful thing to do until you get the problem sorted as described.

Could not save....because the file is already in use or was left open

I have been using PS since V5 and have never experienced this problem which continues to crop up in PSCS3. I get this stupid error message "Could not save....because the file is already in use or was left open." Even if I save as a new file which does not exist anywhere in the galaxy, I will get the same &^%$!! message. I have gone to the folders and made sure read only was unchecked in properties. I have lots of disk space and four gigs of high-end RAM. This is particularly frustrating when you are using this software to make a living and a fifteen minute project becomes a 45 minute project. I like everything about CS3 but want to pull my hair out by the roots when I pay for the best photo editing software available and it continues to screw me out of money. Adobe, are you out there? Can anyone help???
Thanks
Win XP SP2 / P4 3.2 running at 3.36 / four gig ram / buncha HDD space (more than 2TB total.
Thanks and please excuse my prosaic explosions.
Joe

Same error intermittently on different files. Windows7 64bit CS4. Saving a file in Photoshop - working from local hard drive - and got the file in use can not save error. We tried changing the name, saving as a different file type with no success. I closed absolutely every application that was running and then stopped all non windows processes from Task Manager and still file in use.
I was finally able to save by choosing "NONE" for the preview instead of Tiff 8-bit in the save options.
The bug is in Photoshop and it is putting a file lock on the preview file that it creates and then not alowing any save with the preview option checked.
After saving without a preview we could close PS and reopen then open the saved file and resave with the preview selected. Closing PS unlocked the preview file.

I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

I downloaded Blue Fire Reader and it requested an adobe id. I clicked on the link that was in the error message stated http//adeactivateadobe.com. Found out that if the date and time on my Ipad is wrong that it won't let me download a book. I was off 5 hours. I reset my clock settings and adobe id let me download a book from the library. I am back to using Overdrive and adobe again on my ipad.
Thank you.

I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

Hello AKCamus
To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location. I've searched my hard drive and the file doesn't exist. What to do?

Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location. I've searched my hard drive and the file doesn't exist. What to do?

This worked...found on a prior discussion:
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page)...
http://majorgeeks.com/download.php?det=4459
From the link above (near the top of the page)....Under 'download locations' click on 'download@majorgeeks'
To install the utility, doubleclick the msicuu2.exe file you just downloaded and ran.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Restart your computer.
Re-download Itunes (latest version form Itunes website) and install. It worked!

"Could not save x.jpg because the file is already in use or was left open...

Win 7 pro 64, CS5.0 using InDesign 7.0.4 and Photoshop 12.0.4 x64.
Using InDesign to create a manuscript with images. Right click on image to "Edit Original"
Opens image in Photoshop. Make changes, go to save.
Error message "Could not save x.jpg because the file is already in use or was left open by another application"
Using a free utility called Unlocker Assistant, it shows that the file has been locked by InDesign
The workaround is to then use Unlocker Assistant to unlock the image in in the Links folder, but this is a pain and it is happening too frequently.
Putting in that error message I get no google matches.
Anyone know why Indesign is locking the image, when it is the InDesign program that is supposed to be sending it to Photoshop for editing so it can be changed and then overwrite the original image?
Note that it is not consistent but I cannot find any pattern to determine why it sometimes fails and other times allows the altered image to be saved.

You will get a quicker response to post this in the InDesign Fourm http://forums.adobe.com/community/indesign/indesign_general

What do I do when I try to verify a second iCloud email account for iMessage on my iPad and I get an error message, Unable to verify because the email is already in use. Thanks for any answers.

Similar Messages

Maybe you are looking for