What do I do when I upgraded my software but now my phone will not cut back on unless my phone is restored but all info is on iclouds... Everytime I power on my phone it says connect to itunes idk what to do
Everytime I power on my iphone it says connect to itunes and when I do itunes says restore iphone but all my infomation is saved to my iclouds but its not giving me that option to restore it and without it I cannot do anyting with my phone. Please help me this is so stressful.
UNABLE TO RESTORE (connect to iTunes with cable logo)
If you are trying to restore and you device shows an image of a USB cable and connect to iTunes then carefully follow
Similar Messages
-
i bought a locked at&t phone....
i sent it to be unlocked... got back a dead iphone 5s...
plugged the charger in the wall, it gives me a black screen then the white screen with the apple logo, then repeat....
i tried the dfu thing and now the phone is saying connect to itunes, when i plug the phone outta the wall, the phone goes dead.....
plugging the phone into the laptop NOTHING!!!!!!!!!!!!!!!!!!!!!
the laptop doe read my phone.....
no ding.....
the phone wont turn on....
NOTHING
can someone plz tell me what the **** is going onmariidb wrote:
i bought a locked at&t phone....
i sent it to be unlocked... got back a dead iphone 5s... {snip}
the phone wont turn on....
NOTHING
can someone plz tell me what the **** is going on
That's the problem. That's what the **** is going on. -
Hi I changed my pass code and can't remember it and now my phone is saying connect to iTunes but I can't get it to connect could you help pls
Hi
Have you tried different USB ports and different cables just to rule out all the variables?
See here for forgotton passcodes:
http://support.apple.com/kb/ht1212
Hope this helps -
I don't like itunes 10 and so I'm using itunes 9. However, now my phone can't connect to itunes because it says it requires itunes 10.5 or later. Is there a workaround for this?
No.
If you don't want to update to the supported software you can't use the device. -
how can i unlock my granddaughter's iphone that one of her friends changed the password on and locked it? the phone is saying connect to itunes.
If disabled because of a passcode, and you have not synced AFTER setting the passcode, you will have to force the phone into recovery mode & restore it as a new device. All data on your phone will be erased:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, setup as "new" will be your ONLY option. -
My sister logged onto my Apple ID when she got her iphone and now her phone number is connected to the account. I want mine on the account
Hey DevonElise,
Thanks for the question. The following article will help to unlink your sisters phone number, and link yours:
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Thanks,
Matt M. -
I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files. The external hard drive is a Western Digital "My Book Live" 2 TB. How do I solve problem?
I also had problem accessing my WD MyBookLive after upgrading to Maverick.
To resolve the problem, I used Connect To Server (Cmd K) to specify the IP address.
Then I enter a user id and password I created in the MyBookLive.
You can also verify that you have admin access to the MyBookLive using Safari or Chrome.
Just enter the MyBookLive IP address as the URL. -
How do I get my apps to work again? I saved my purchased app and downloaded the updated software. Now my apps will not open. Why?
Launch iTunes on your computer then click Store / Authorize This Computer from the iTunes menu bar.
-
ive created an apple id account and my iphone 3gs is plugged into computer. What do i do now? screen on phone still says connect to itunes
Is the iPhone connected to iTunes - available under Devices in the iTunes source list?
-
I keep getting a pop up on my iophone 5 that says "connect to itunes to use push notifications" I've connected to itunes and nothing happens. I cant use the phone as I can;t get the pop up to stop
So after exhausting countless hours I just added the App "Google Search". It's not as great of an interface but I can access Google Voice and keep tabs by just checking in every so often. Better than not having Google Voice at all.
-
My iphone will not turn back on after i tried updating it !!!! It says connect to itunes and said it has to be restored but now it cant be restored or anything. this update messed up my phone !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Hi apiccolo5,
Thanks for visiting Apple Support Communities.
See these articles for steps that can help you resolve the issue you're seeing:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
Best,
Jeremy -
Today I updated, thru itunes, my iphone4, and restored backup, but am stuck in setup loop. After few screens of setup phone says "connect to itunes" or "connected to itunes". I turned off the phone and turned back on - still stuck. Help, please?
Unable to Update or Restore...?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps... -
When waking up my macbook air from sleep, display will not turn back on.
My mid 2011 macbook air running lion is having some issues. The display, after the laptop has been woken up from sleep, will not come back on. The rest of the computer is fully functional as when i press the volume keys, i can hear the sound that it makes, the keyboard brightness keys also work. Theonly way i can fix this at the moment is doing a force shutdown and turning it back on again. If anyone has an answer to this it would be greatly appreciated.
Thanks.Having much the same problem with my 2011 11" Air, running 10.8.2 and wondering if you ever got any resolution on this. I've had the same issues through several versions of Mountain Lion.
My display does come up, but what I see is my login screen (I have it set to require a password on wake), but with a beachball, and I can't type in the password field. I can tell that other processes are running (for instance, just now I could hear a YouTube video playing) but I can't make it respond to input.
I've also had times where I put it to sleep by closing the lid, only to come back some time later to hear the fan running and everything unresponsive.
I've reset the PRAM, reinstalled Mountain Lion, reset the SMC. I'm purposely not running a lot of extra software.
Just curious, are you using FileVault at all? -
I have an iPhone 5 with 8.0 update. I was taking a screen shot and my screen went totally white. It will not go back to normal. It is still white. I can hear a text but can not see it. What has gone wrong? Does anyone know how to fix this?
Hi Try a Reboot press & hold power button & menu button hold both down until you see Apple Logo . You will not lose any data . Cheers Brian
-
I tried to upgrade the software of my phone and now it tells me to plug it into iTunes. It's now plugged in and nothing, keeps showing me to pklug it into iTunes. What do I do next?
How to use your iPod to move your music to a new computer
Maybe you are looking for
-
11.1.2.1 execute dataload error in erpi and FDM
Hi I met a critical problem when execute dataload in erpi using classic method. there are data in E business suite, but I don't know why I can't pull data from EBS. also I execute dataload using FDM method, the import step in FDM yields an error: "er
-
one question about clusters in Zones: We are testing the zones feature to heat IBM Virtual partition because of one case. We wonder wheather Sun Clusters is made between zones in Solaris 10. From our customers, IBM show that they can do cluster betwe
-
Workflow for converting PAL DVD to NTSC
Hi, I have read this thread "http://discussions.apple.com/message.jspa?messageID=7387015#7387015" but am a little unclear and would appreciate some help. I have shot 3 short movies in PAL anamorphic, edited in Final Cut Express HD 3.5, exported using
-
Why does RoboHelp HTML v11.0.1.235 crashes when inserting a script?
I inserted the following script "<noscript> <!--Javascript is not enabled--> </noscript>". I used the menu options Insert > HTML > Advanced > Script. Unfortunately, RoboHelp places this tag inside the "<script>" "</script>" tags which causes errors.
-
[Solved] Cannot ping my Arch linux pc from other devices
My newly installed arch linux pc is connected to my home network via wifi. I can successfully connect to the Internet. Also, I can successfully ping other devices on my network. However, I am unable to connect to my Arch linux pc from any other devic