What do I do when iPad 3 does not turn off?
What do I do when my iPad 3 does not turn off?
Try a device reset:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.
Similar Messages
-
My Ipad 2 does not turn on when not plugged to electricity. Even when plugged to electricity, it constantly restarts/switches itself off. what is the problem, please help??
i plugged it and pressed the home button for a few seconds. the connect to itunes screen appeared and the moment i disconnect the cable from the electric plug, it switches off. when i connect the cable to the PC, nothing happens, its as if nothing has been done.
-
My Ipad mini is not turning off with the botton neither with the cover. It is not also turning on when I open the cover. Please, what I have to do?
If the cover you bought is not a legitimate apple cover than you may be having the same issue I had.
The one I purchased has a top cover swivel, if you spin it around( meaning the top case cover)
The magnet will return to the correct spot and it will work again. It is only located at one end of the case.
Hope this might help:) -
My iPad screen does not turning
My iPad screen does not turning. What is problem?
Hello Stephencho41,
It sounds like you are unable to turn on your iPad. Although the following article is about the iPhone, the information and troubleshooting is the same for the iPad as well, so I recommend these steps specifically to help you out:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thank you for using Apple Support Communities.
All the best,
Sterling -
Sound does not turn off when switching between AppTabs, ie Pnadora to other radio stations
I have several radio stations (Pandora, NPR, etc) as Apps Tabs, but the sound does not turn off from one when switching to another.
Thank you. This is precisely the type of solution I was looking for.
My home network is set up with a single router that assigns DHCP addresses and does the NAT to the internet. This router does not have wireless. Its location is too out of the way (given where Comcast brought the line in) to be any good at wireless broadcast. So I installed two access points on the wired network.
I had vaguely known something about using the same SSID on the multiple base stations but I had also heard of difficulties a university reported having some years ago.
In any case I made the switch and it works great. I get full bars on the icon on the menu bar as I walk around the house. Exactly what I was looking for and no manual intervention once I set it up.
Thank you. -
IPad cover does not turn screen off after iOS6 installation
After installing iOS6, the screen does not turn off when closing the iPad cover
Did you check in settings, General....Use cover lock ON?
It could have switched off on you. -
Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?
Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears. See if that clears the glitch.
-
ipad is frozen. game i was playing shows small in center of screen. does not turn off. siri says not connected to internet, but i cannot get ipad to do anything...frozen.
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Apple 10.7 lion - macbook does not turn off when plugged in. I put the laptop on "sleep" or close the screen and the computer stays on and stays hot! This has been happening ever since the upgrade to Lion! Is there any way to fix this? FIX THIS!!! MY MACBOOK GETS TOO HOT WHEN I CLOSE THE SCREEN BECAUSE OF THIS ISSUE!!!! FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!! This only happens when it is plugged in!!!!! Any way to fix this? Help.. :-( Please!!!!!!!! The light stays solid when plugged in on sleep mode!!! This *****. Help..
I figured it out! I don't fully understand why, but when I uninstall ESPOINAGE 2 from my laptop, sleep works fine now.. Weird!
-
This is very odd.
I need to use my iPad with Keynote and a projector. I have done this before by turning the iPad off (hold down the top button until the "Slide to turn off" appears but suddenly the darn thing does not turn off.
It LOOKS like it is turning off - I slide the red slider and get a spinning ball for a brief time, but if I plug in or just hit the bottom switch, bingo, it pops back on instantly.
My first thought was maybe I'm just not giving it enough time, but no, I gave it fifteen minutes and it still was not really off.
Now - I just tried it again and of course it worked, making a liar out of me
Has anyone else had this problem? Am I doing something wrong somehow?my story it's incredible...
I bouth Ipad Wi-fi 64Gb 3 days ago in Germany. all very nice...i bouth some new programs, books and ......the Ipad now does not turn on anymore!!!
I tried all, no way.
and here comes the nice story. as I told I bouth the Ipad in Germany and I leave in Turkey. i went to the apple store in Istanbul and they can't help me as Ipad is not lunched in turkey yet!!! where is the worlwide insurance?
Should I fly to another country to get my Ipad fixed? -
My iPad is frozen. Does not turn off or charge just black screen with logo. Tried to reset by pressing the two buttons and nothing.
Then you should try restoring the iOS software next. Read this and pay attention to the last part of the article that describes recovery mode, you may have to restore your iPad that way.
iTunes: Restoring iOS software - Support - Apple -
My ipad does not turn off...i tried pressing the slep/wake button and home button for more than 10 secs but nothing hapened. Also, the screen is not rotating on portrait and landscape views...
While this could potentially be a hardwar issue:
Try a rest: Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
If the reset doesn't work, you may need to consider restoring the iPad to factory settings -
My LCD does not turn off during the call. I have a iphone 4. What do i do?
My LCD does not turn off during the call. I have a iphone 4. What do i do?
You may have a defective proximity sensor but try some basic troubleshooting first...
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem restore with your backup.
If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
If still a problem, it's likely a hardware issue. -
does not turn off my ipad2. The circle is flashing not to
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
-
Does anyone know why the backlight on my iphone4 does not turn off automatically?
It's called "auto-lock" - adjust the time in the Settings app to a lower amount.
Maybe you are looking for
-
I understand the difference between WiFi and WiFi + 4G iPads, but I have been able to find very little information on whether I could buy the WiFi + 4G iPad in the US and use an o2UK microsim as I read somewhere that the at&t carrier iPad doesn't wor
-
In Profitability Analysis How view the Report.
HI friends Good evening I configure all steps in Profitability Analysis, but i cant view the Report, It showing only Report folder. under Report folder there is no items, How to view the Report contents. Thank you Ashok kumar [email protected]
-
Is there a UDF cross reference function in XI?
We have many name spaces containing one or more maps each of which can have many UDFs defined for it. Is there any function or utility in XI that would enable us to know what UDFs are in what maps and in what name spaces, without having to manually
-
Production order: Cost analysis for each operation ?
Hello, i want to select the detail plan costs (Setup, Labor, Machine) for each operation in a production order. Unfortunalety i found only the plan costs as summary for all operations. Only the time activities are available for each operations. Can a
-
I have an HP desk jet 3000 printer; I have an error message that said: door open. What does this mean? And how do I correct the problem?I cannot print! Thanks to all who help!!