What do I do with my laptop when the shutdown keeps popping on the screen?

What do I do with my laptop when the shutdown keeps popping on the screen?

Intel-based Macs: Resetting the System Management Controller (SMC)

Similar Messages

  • My note 3 S Voice stop working when the screen is black

    My note 3 S Voice stop working when the screen is black

        mr1bunny,
    Sorry to hear that you have had trouble with the S Voice app. When did the trouble begin? Any recent changes to the phone that correspond with it working when the screen is black? Go to the S Voice application -> Menu -> Settings -> Is the "Voice wake-up" turned on?
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • I have a problem with my new Apple Air. It usually takes few seconds for the laptop to be untouched in order to be locked. So sometimes when the screen starts to get dim in order to lock, I immediately touch the keypad to avoid locking the laptop

    I have a problem with my new Apple Air. It usually takes few seconds for the laptop to be untouched in order to be locked. So, sometimes when the screen starts to get dim in order to lock, I immediately touch the keypad to avoid locking the laptop, the result is a black screen appears with no responding to anything from pressing the keyboard to pressing the touchpad. It takes few minutes for the laptop to open again and then a message appears saying that there was a problem with the lock security.
    What is happening exactly?

    It sounds like your sleep timers are set to too low of a value.  Go to System Preferences -> Energy Saver and set both timers to longer times.  The computer sleep timer should be a longer time than the display sleep timer.

  • I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared

    I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared without Doing anything!!
    And now I can't use the " tap an click " from my tack-board and no nothing was spilled on my mac.
    Please help  

    Check your login items in the Users & Groups preference pane. Remove any that you don't recognize.

  • TS3700 music stops playing when the screen goes dark, but the earbud jack is flush with the iPod. The Jack is hard to push in now. what is the problem?

    Music stops playing when the screen goes dark; the earbud jack is flush with the iPod. The Jack is hard to push in. what is the problem? How do I Fix it?

    And you are positive the white part of the headset is flush with the body of the Nano?
    Have you tried another set of headphones to see if the problem persisted? If so, it's likely that the headphone jack needs replacing.
    B-rock

  • Is there a way to open a new window with one site when the home setting on Firefox has multiple websites?

    While working in Firefox is there a way to open a new window with one site when the home setting on Firefox has multiple websites?

    I guess I'm not explaining myself fully. I have a home page designation in firefox preferences that starts firefox up with 5 sites. that pretty fills up my screen with tabs.
    At some point I want to initiate another WINDOW in firefox (NOT a tab). I would like to be able to open up a window that ONLY has ONE tab, or as if there were only one site designated as the home page. This gives me a workspace that has my most useful sites available in tabs in one window, and also another WINDOW that I can move around in and even create more tabs without messing up my primary set of TABS (in my primary window). I see how this might not be doable without doing what I do now, which is open up a new window, and then close tabs until the new window just has one tab for me to work from.

  • Hi BC, I have an issue with BC. When the shopping cart is used it takes stock out of inventory and h

    Hi BC,
    I have an issue with BC. When the shopping cart is used it takes stock out of inventory and holds it, regardless of whether or not a customer proceeds to purchase. OK.
    To make matters worse, the stock is only cleared from the shopping cart when the customer closes the browser - not when they close the shopping window.
    Now lets say a customer doesn't close their browser for a month - it happens! .. when their stock is finally returned it may throw out our stock levels that have in the meanwhile been adjusted. So their stock will be added on top of an accurate stock take, putting stock in that isnt really available.
    This is causing us mayhem.
    We have not yet seen if stock is actually returned at all. In the test we did today where we filled a shopping cart then closed the browser without making a purchase, the stock was not returned immediately. So we dont even know when it will be returned - thats IF a customer actually closes their browser. Any solutions out there?
    Jo

    Hi there,
    The way stock is managed in this situation is desirable for many in that case otherwise shopping on a site and adding to cart would not be viable or use friendly.
    What you mention about not closing a browser though is a case that is not true. IF you go into the shop settings in the admin you can see the cart restore timer which is by default 24 hours but you can change this to as low as 1 hour if you wish.

  • What type of Data target is used when the safety interval is used?

    Hi ,
    what type of Data target is used when the safety interval is used in generic delta in datasource?DSO or cube  or cube?
    Pls explain me ?
    Thanks,
    Nimai

    It's up to your reporting requirement to go for dso or cube..
    I prefer to having staging with DSO and then further reporting on Cube ..
    It's always easier to manage when you have any changes to the cube .. you need not to extract data from R/3 .. if you have dso you can extract directly to cube
    Another thing is -for any reason some of your records got corrupted so you can have full loads to dso which has the overwrite functionality...  and sends delta records to cube. even in cube you can do selective deletion but we have to very careful to avoid double records in next loads
    Edited by: Srinivas on Jul 29, 2010 8:23 PM

  • I plugged my Ipad3 in order to update the software to version 6.1 but I got an error and my Ipad now is locked, it's showing the Itunes logo with usb cable on the screen. What should I do now?

    I plugged my Ipad3 in order to update the software to version 6.1 but I got an error message and my Ipad is locked now, it's showing the Itunes logo with USB cable on the screen. What should I do now?

    You will probably need to restore using Recovery Mode. You can read about it here.
    http://support.apple.com/kb/ht4097
    Or you can follow these Recovery Mode Instructions
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • WHAT I DO WHEN THE SCREEN IS BLUE BECAUSE Startup Disk FULL?

    WHAT I DO WHEN THE SCREEN IS BLUE BECAUSE Startup Disk FULL?

    Have a look to this post : Blue Screen on Startup with MacBook Air Rev A (fitted with Hard Drive)

  • Was just scrolling through my apps when the screen suddenly froze. A force shutdown didn't work and when I pressed the silent on/off button, there was no vibration either. The frozen screen faded to white with a few lines and about 10 minutes later, the

    I was just scrolling through my apps when the screen suddenly froze. A force shutdown didn't work and when I pressed the silent on/off button, there was no vibration either. The frozen screen faded to white with a few lines and about 10 minutes later, the edges started to turn black, forming a ring which got larger till about 4 hours later, the screen turned completely black. I tried connecting to iTunes but it wasn't detecting the phone and I can't do anything with it now... When it turned completely black, I charged it and after a while, the low batt screen came on but it was fuzzy and flickering with the white ring... What to do know ???????

    Restart your computer while holding down left mouse key. That will eject the CD and your Mac will start as normal.
    Lupunus

  • How can I download a previously downloaded purchase to my iTunes library on my laptop when the listing for the song in my library won't play because it says it cannot locate the file. Yes I have searched my iTunes folders and also done a full windows sear

    How can I download a previously downloaded purchase to my iTunes library on my laptop when the listing for the song in my library won't play because it says it cannot locate the file. Yes I have searched my iTunes folders and also done a full windows search. The track plays on my iPad and my iPhones but will not play on my laptop!?
    It has an "!" To the left of the song title in my library
    My worry is that if I sync my iPad/iPhone then I will lose the track on those also!

    If you cannot find the file on your hard drive then once you delete the current broken entry you should be able to redownload from iTunes in the Cloud. This assumes the item in question qualifies. Note that audiobooks, digital booklets, iTunes LPs & Extras, ringtones, selected movies etc. don't.
    If prompted don't hide the item. You may find that you need to close and then reopen iTunes before it will appear for download.
    tt2

  • TS1398 I can no longer sign in to my home fi (bt hub) with my iphone 4. Yet I can get on wireless with my laptop so the hub is working. The only thing Ive done different recently is download and use an app called Onavo mobile ltd which Ive now deleted, he

    I can no longer sign in to my home fi (bt hub) with my iphone 4. Yet I can get on wireless with my laptop so the hub is working. The only thing Ive done different recently is download and use an app called Onavo mobile ltd which Ive now deleted, help pls?

    Read another post in the forum about this and it appears this app also installs a profile with a proxy service that you will have to try and delete as well. Check that out.

  • HT4623 since i updated my iphone 4 to ios 6, i ve noticed that the wifi connection turns off each time when the screen is locked. I need to be connected with wifi all the time so as to stay updated with all my emails.

    since i updated my iphone 4 to ios 6, i ve noticed that the wifi connection turns off each time when the screen is locked. I need to be connected with wifi all the time so as to stay updated with all my emails. is there anyway for this problem.
    (PS: i know we could use 3G but i want to use wifi instead)

    I am having a really wierd issue as well that is probally related. I dont see 95% of the album artwork associated with my music. Also, it seems as if this has gotten worse since I started using that match feature

  • My iPad 2 screen has gone blank. I don't know whether the iPad is on however when the screen went blank there was 97% battery. Does anyone have any ideas as to what the problem maybe. ?

    The screen on my iPad 2 has gone blank.i can't tell whether my iPad is on or not. When the screen went blank there was 97% battery. Could anyone possible give me an idea as to what May have happened and if it can be fixed.
    Thank you, Nicky .

    Frozen or unresponsive iPad
    Resolve these most common issues:
        •    Display remains black or blank
        •    Touch screen not responding
        •    Application unexpectedly closes or freezes
    http://www.apple.com/support/ipad/assistant/ipad/
    iPad Frozen, not responding, how to fix
    http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    Black or Blank Screen on iPad or iPhone
    http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

Maybe you are looking for