What do i have to do to make sure webex is running on firefox

this is what i get when i try to access a site on webex player
is not available for your computer's operating system. For information about system requirements, please refer to the FAQ support
go to faq no help
this is what is on the webex website
* Add an exception for the entire webex.com domain = *.webex.com.
o At the minimum, the following addresses should be added as exceptions: YOURSITENAME.webex.com and akamaicdn.webex.com.
* ActiveX and/or JavaScript will need to be allowed through the firewall and web browsers should be configured to not restrict ActiveX and/or JavaScript.
* We ask that WebEx sites are not cached (content, IP-path) on proxy servers.
how do i do this on firefox
''fixed the formatting to keep it on the page''

Maddykins2 wrote:
Meg....I live on a boat and did not find actual walkie talkies that I liked and i phone has apps for that. Thanx......
I'm not sure why living on a boat necessitates a walkie-talkie app but if it's what you need, it's what you need. Sorry I can't help.

Similar Messages

I have placed a check mark in the Block Pop-Up Windows box and when I restart Firefox, the box is empty and I begin receiving Pop-Up's again. What do I have to do to make the check-mark permanent?

I have placed a check mark in the Block Pop-Up Windows box but when I restart Firefox, the box is empty and I begin receiving Pop-Up's again. What do I have to do to make the check-mark permanent?
== This happened ==
Every time Firefox opened

See this:
http://kb.mozillazine.org/Popups_not_blocked#Other_software_disables_the_popup_blocker

What do I do when it says "make sure your network settings are correct and your network connection is active" when I am trying to update or restore my ipod?

What do I do when it says "make sure your network settings are correct and your network connection is active" when I am trying to update or restore my ipod?

Are yo getting a network timeout error?
Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.

Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?

Release notes for 2.16 states that there was a fix for alerts not being modal. We are using 3.0.6 and are experiencing the same issue; was there a regression to the modal fix. What version needs to be used to make sure that alert messages are modal?

We are trying to determine why alert boxes are not modal
The fix states it's for Firefox 2.0 - 3.7a1pre
We are using 3.0.6 not the current version of 3.6.13.
Add-on release notes 2.16.1
https://addons.mozilla.org/en-US/firefox/addon/foxyproxy-standard/versions/
Repeating 2.16 release notes since 2.16 was not made available for more than a couple of hours
Fixed bug whereby some alert boxes weren't properly parented/owned. This led to some alerts not being properly modal
with respect to the window/dialog that issued the alert.

What are correct settings on iCloud to make sure photos are on all devices?

What are correct settings on iCloud to make sure photos are on all devices?

If your Westell modem (actually, it is likely a gateway...a combination modem/router) is set up for "PPP is on the modem", then the AEBS should be configured to Connect Using = DHCP or Ethernet. The AEBS also needs to be configured in Bridge Mode.
Open AirPort Utility, click on the AEBS, and click Edit
Click the Internet tab and change to setting to "Connect Using DHCP"
Then click the Network tab and set the Router Mode for "Off (Bridge Mode)"
Update to save changes and restart the network by powering everything off in any order that you want. Then start the Westell device first, followed by the AEBS a minute later, etc until everything is powered back up.
This type of setup may work OK for you.
If not, you will need to change the Westell setup to "PPP is on the router" and then configure the AEBS to provide the PPPoE service as you did originally.
AT&T does generally advise that the modem should be in "Bridge Mode" or "PPP is on the router" when other routers are used with the "modem". See this document for more info:
http://www.att.com/esupport/article.jsp?sid=KB401764&cv=801,902&title=Connecting +a+non-AT%26T+provided+router+to+your+AT%26T+Internet+connection#fbid=43oi_bcpYy U

Smartview Error: "Cannot Connect to Provider. Make Sure It Is Running in the Specified Host/Port (503)

I am having an issue retrieving on a SmartView grid running 11.1.2.2.309.01 and SmartView 11.1.2.2.102.I have a grid with three attribute dimension and, at first it was long running and gave me a netretry netinterval error. I shared with my administrator and, they gave me the registry updates to increase my timeout for my default browser. Now, I try to retrieve the same sheet and after approximately five minutes, I get the message, "Smartview Error: "Cannot Connect to Provider. Make Sure It Is Running in the Specified Host/Port (503)". I am not sure what this means. I can retrieve on other grids with one attribute dimension or a regular retrieve but, for some reason, I notice when I retrieve on multiple attribute dimensions, I am having this issue. I had this tested with others and, they are experiencing the same result. Any thoughts. Thanks in advance

The timeout was updated to 7 minutes but, the timeout on the APS was never updated. What happened was there was a 7,000 member dimension where attributes where being used to build a retrieve. The attributes were what was causing the issue. Not to say you should not use attributes. Ultimately, an alternate hierarchy in the 7,000 member dimension will help but, I used other members to get the results I need. I just never saw the error message before and, did not see it in oracle support.. Thanks.

How to make sure an applet runs with Java 5?

Hi all,
First let me say thanks for all the help in the past. You've help me go from noob to intermediate noob. I've just about finished my first applet game which can be checked out here .
Now I've been reading about problems with mac and 1.6. (note it works on Linux). I want to make sure that it runs fine and of course I don't own a mac. So I downloaded the 5 JDK. Selected it as the java platform in Netbeans, compiled and it ran fine.
Questions:
Do I have to always use 1.5 to compile and perhaps set it as default?
Since it works in 1.5, do I compile it with 1.6 and just upload?
I'm worried I'm not testing it correctly. I mean if I have both 1.5 and 1.6 installed on my machine, how to I make sure the applet is only using 1.5 to run?
Thanks
Darrin

corlettk wrote:
I haven't got a clue RE your problem other than for max-portability you should compile with [-target 1.5|http://java.sun.com/j2se/1.5.0/docs/tooldocs/solaris/javac.html].
I must say I'm impressed, except I suspect my PC must be substantially faster than any of your test platforms... can you throttle it to CPU performance somehow? Or maybe it's just that my reflexes aren't what they once where.Thanks.
There seem to be two issues. The first is what people are using. This web stats shows pretty poor penetration of 1.6.
[http://www.statowl.com/java.php|http://www.statowl.com/java.php] Penetration: 54% with JRE1.6 + 19% with JRE 1.5. Total 73%.
The second is I've read that mac and 1.6 do not get along except on a 64bit platform.
So for applets there is not much choice but to compile on 1.5 for the broadest user base. I guess the good news is 1.4 and earlier are almost non-existent.
Edited by: Darrin.A on Apr 27, 2009 8:11 AM

My Mac Book Pro has slowed to less than a crawl (possibly from a worm or virus). How do I make sure it's running at peak efficiency before I complain to comcast

My Mac Book Pro has slowed to less than a crawl (possibly from a worm or virus). How do I make sure it's running at peak efficiency before I complain to comcast

Please answer as many of the following questions as you can. You may already have answered some of them; in that case, there's no need to repeat the answers.
Restart the router and the broadband device, if they're separate. Any change?
Run Software Update and install all available updates for OS X or the computer's firmware. Any change?
If possible, connect to the router with an Ethernet cable and turn off Wi-Fi. Any difference?
Are any other devices on the network, and if so, are they the same?
If you can connect to more than one network, are they all the same?
Are all network applications affected, or only some? If only some, which ones?
Is networking always the same, or is the problem intermittent?
Disconnect all other devices from the network. Any change?
If you're running a MacBook with the lid closed, open the lid. Any difference?
Start up in safe mode and test. Any difference?
Start up in Recovery mode. From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Any difference?
If possible, turn off Bluetooth and disconnect any USB 3 devices. Any difference?

Error: [NQSError:13037] cannot connect to BI security service,Please make sure this is running properly (with SSL or not) in EM

Hi,
Im unable to open the RPD online getting following error.
Note: Im not done any changes. Its works good till yesterday EOD.
Error:
[NQSError:13037] cannot connect to BI security service,Please make sure this is running properly (with SSL or not) in EM.
[NQSError:37001] could not connect to the oracle BI server instance..
Kindly help me to fix this issue.

Hi,
Could you access the answer side.
Could you see the reports.
Do one thing, take a back up of NQS config file from <Oracle Location>\instance\instance1\config\obiserver folder\nqsconfig.ini file.
Copy nqs config file if you have already have a back up.
Restart the services and try once.
http://mkashu.blogspot.com
Regards,
VG

Error: "Cannot connect to the provider. Make sure it is running in the specified host/port. Error (12031)"

Hi,
EPM version: EPM 11.1.2.1
When we are using Zoom In Level as All Levels and tring to drill down for dimention of HFM application we are getting below error.
Error: "Cannot connect to the provider. Make sure it is running in the specified host/port. Error (12031)"
As we found some solution from comunity , we have performed below workaround but still we are getting same error.
·              We have done the changes in mod_wl_ohs.conf file of OHS with (WLIOTimeoutSecs 3600 and WLIOSocketTimeoutSecs 3600)
·              And then restarted OHS and APS service but still we found same error.
Could anyone please suggest ,where can we trace its log from web server and the solution for this issue?
     Thanks,
         D.N. Rana

Hi,
We have already performed the changes for APS in OHS as mentioned in the solution and the path also same as under OHS.
Intially we were getting error for "to increase netRetryCould and NetRetryInterval" as a solution we have added below 3 registry DWORD keys under path
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
"KeepAliveTimeout"=dword:00180000                   (26 Minutes)
"ReceiveTimeout"=dword:00dbba00                      (240 Minutes)
"ServerInfoTimeout"=dword:00180000                  (26 Minutes)
Above error resolved but then we received Error"12031"
Now we have added above 3 DWORD keys under path HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
and now we are not getting the error "12031".
But here we are not getting how it(LB issue) resolved with above solution?
Thanks,
D.N.Rana

System 'CE3' is not available. Make sure it is running properly.

hi,
im in CE 7.1 EHP 1. when im trayin to assig a Role to a new task in my process Model i get the error http 502. so i went to Process Instance Tab where i got the error System 'CE3' is not available. Make sure it is running properly.
whatever in windows-->preferences SAP AS Java i have the intance and in Server tab i can see is with status STARTED.
any Idea?
Thanks.

Hi Rodrigo,
The HTTP error code 502 is 'Bad gateway'. I also experienced this once or twice when I configured a certain proxy (or proxy script) that wasn't able to resolve that host. Try bypassing the proxy or using a special proxy for your host CE3 in the Proxy Settings of your NWDS.
Cheers,
Martin

SmartView Error "Cannot Connect to the Provider. Make Sure It Is Running...

Hi All
Our user are getting below error when they try to connect from SmartView
Cannot Connect to the Provider. Make Sure It Is Running in the Specified Host/Port.Error(12031).
We are on 9.3.3 planning.our web server is WebSphere
Please suggest
Thanks,

You might want to increase the timeout and check:
Smartview in Excel utilizes some Microsoft settings that it obtains From IE. When running on IE 7 or higher there are new settings that have a low default time out. You can increase these by following the instructions in the articles listed below
http://support.microsoft.com/kb/813827
http://support.microsoft.com/kb/181050
Make sure you have a safe backup of the windows registry before you do this .
1. Open the Registry (Start -> Run -> Regedit)
2. Locate the following section:
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\
3. Create the following new keys for DWORD with Hexadecimal values:
ReceiveTimeout and set it to 00dbba00
KeepAliveTimeout and set it to 00180000
ServerInfoTimeout and set it to 00180000
4.Disconnect and close the Smartview and launch a fresh connection
HTH-
Jasmine.

Make sure impdp is running

i am using Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi.
How can i make sure impdp is running?
V$session.message = SYS_IMPORT_TABLE_01: IMPORT : 0 out of 27824 MB done
I do not see size of segment increasing or free space in tablespace decreasing.
dba_datapump_jobs.state = Executing
select d.session_type, status, seconds_in_wait, wait_class , event from v$session s ,DBA_DATAPUMP_SESSIONS d where username ='IAMAIN' and program like 'orac%'
and s.saddr = D.SADDR
SESSION_TYPE     STATUS     SECONDS_IN_WAIT     WAIT_CLASS     EVENT
MASTER     ACTIVE     4719     Idle     wait for unread message on broadcast channel
WORKER     ACTIVE     0     User I/O     direct path write
WORKER     ACTIVE     49     Idle     wait for unread message on broadcast channel
It does not have any blocking session , or lockwait.
Please suggest.

sybrand_b wrote:
And after how many seconds you think impdp doesn't work? 5? 2? 1?
I think you should observe a bit more patience. Give your keyboard some rest ;)
It takes a while before impdp has processed metadata.
Sybrand Bakker
Senior Oracle DBAThe tablespace size start reducing after 3 to 5 minutes interval but the job terninated adruptly. So I attach the job but now its 1 hour nothing is happening.
Edited by: spur230 on Jun 4, 2010 11:41 AM

Is it possible to make sure the app runs all the time either in the foreground or background, User should not have the flexibility to stop it from running

Hello all:
I have an enterprise app and i need to make sure it runs all the time.
If the app is not running i should silently make sure it restarts again.
Any ideas on how it can be done. It is an enterprise app
Thanks

Hmmm....
How about wrapping all of your dll calls in a single VI (or an Action Engine ) and make sure the VI's thread is NOT set for "Same as caller".
"Threadconfig.vi" (sp?) will also let you dictate the number of threads associated with an execution system. Set your target thread for "1".
Not sure on the above.
Please correct me if this is wrong!
Ben
Message Edited by Ben on 07-19-2007 08:26 AM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Can anyone guide me how to sync sms on iphone to pc and also what setting need to be done to make sure sms remain in iphone indefinitely - need to keep record for work purpose. thanks.

Need help from the expert on how to sync sms on iphone to pc and how to make sure that sms on iphone is not being deleted - need to keep sms for office record purpose

You mean take the cover off of the iPhone, to look inside? I'd recommend against it. Even with warranty expired, you might qualify for an out-of-warranty service, which for 3GS is $149.
Other than that, any repair/service options are going to cost money. You might want to see if a wireless carrier will let you get a new contract & phone.
Out of curiousity, you're just using at as, basically, an iPod Touch, if there's no cell provider? Did I understand that correctly?

What do i have to do to make sure webex is running on firefox

Similar Messages

Maybe you are looking for