What do I have to do to print?
I bought photoshop cs5 to print with my canon plotter imagegraf pro w8400pg. Does not print how do I have to set up or is there a plig in I need?
Hi curt, I am at home now but basically it is asking me to set the color profiles and choose if photoshop or the printer should determine my settings. The printer shown is correct. I send it to print and it gives me an error for black.
Similar Messages
-
What do I have to do to print a true 16X20?
What do I need to do to print a true 16X20?
You need to add a little bit more detail to your question. Do you mean setting up your document or printer? Setting up bleed edges, etc? To print that size you would adjust your document settings like your dimensions (16x20),resolution(300dpi for print), and color mode(CMYK or RGB depending on what printer your using). From there you would want to print(ctrl+p) your document after saving it(ctrl+s). The print setup will appear, select your printer and settings. Everything should default on your printer settings so you shouldn't have to touch anything but print.
-
I have problems with my printer says the ink system failure error 0xc18a0206 what do I have new cart
I have problems with my printer says the ink system failure error 0xc18a0206 what do I have new cart. Printer is Hp Photosmart c5180
This article should help resolve the error you are getting:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
Give the steps a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too. -
After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer. The printer is working. What do I have to do to be able to scan again?
Often, you have to download updated vendor software drivers when you switch operating systems. HP doesn't list a C5500 on their web site, however, here's the link to the OS X 10.6 C5540 software. If you have one of the other C55xx models, look for the updated driver/scan software on their software/driver download section of HP.Com.
-
I am using iphoto 6.06 for my intel imac. I have been trying to print pictures from iphoto and i keep getting a message that states " unreadable file: the following file could not be imported. the file is in the iphoto library folder" also when i try to print a picture from iphoto i get a message that says "no page was selected"
not sure what happened but i can pnly print when i drop the photo onto my desktop as an 8.5 x 11 size picture and i am trying to print 4x6'sSince the new library gives you the same message log into another user account on your Mac and see if you can run iPhoto without getting that message. If you get that message there also a reinstall of iPhoto seems indicated. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
Then install iPhoto from the disk it came on originally and apply all available updates to it. -
I printed a 'preview' document and now it continues to print a never ending set of copies. I have re-installed the printer software, but it still continues to print more copies. What do I need to do to stop the document printing?
Try resetting the printing system.
1. Open System Preferences > Print & Fax
2. Move your mouse over the Printers list
3. Hold down the Control button and click the mouse
4. Click the "Reset printing system ..." popup
5. Restart your Mac
This will remove your print queues but not your printer drivers. So you will only need to add your printer queues again. -
Hi, My printing has suddenly changed in adobe to a large scale, as in, what should be one page of print comes out as 24 pages? I havent changed anything, its happening on more than one document also, I have to stop my printer before all the pages spew out. I have tried printing 'one single page' and it does exactly the same? Help?
Is the Poster Print feature turned ON?
-
I have a printer canon mp495 and I'm trying to connect it to my iPad. But my iPad can find it the printer. Do I have to reset the printer or what app do I use?
Printopia is Macintosh-only. <Printopia for Macintosh>
Another program that is available in both PC and Mac versions is FingerPrint. <FingerPrint>
For either program, your computer must be on and awake any time you want to print.
Fred -
I have problem with wireless print HP after iOS 7 !? What can i do
I have problem with wireless print HP after iOS 7 !? What can i do?!
Tap Settings / General / Reset / Reset Network Settings if your having a problem with your network. If you have another problem go to the same place in "Reset" and just reset all settings
-
I downloaded Printopia Demo to my Mac laptop, but when trying to install it, a window comes up showing the printer is recognized, but there is no button to go any further. What do I have to do?
Close the window and print .... Read this for the details. Once you install it - you should be able to print from the print option in any app.
I have downloaded the demo twice. I forget exactly how to do it, but it is very simple. If you installed Printopia, just try to print something - try a web page or a photo. Tap the Arrow icon in the upper right corner in most apps to get to the print option. -
What app can i get to have my dell v515w printer work with my iMac
what app can i get to have my dell v515w printer work with my iMac
Dell has some really great drivers -- for Windows and Linux. But none for any version of Mac OS X.
LinuxPrinting.org does not llist that as a printer supported by any of their drivers -- not even badly supported. -
I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
I am trying to set up using my printer wirelessly through airport. I have a macbook and my husband can print wirelessly from his Macbook Pro but I can't. What do I have to do to set mine up? The printer is an Epson R2400
Is there a cd that came with the printer?
If so, put in the cd and that will help you set it up.
If not, I think macs come with a program that helps you set up printers.
Also make sure that the printer is connected to the same network.
Make sure the printer is on. -
Many Apps nwhen it comes time to print from my Ipad2 search foor an airprint printer but i only have an HP wireless printer and they don't find it what can I do to use the HP wireless printer in these apps????
Hello Jfadair9,
Thanks for the post. I'm not sure which model printer that you have but you should be able to print from your iPad 2 with the HP Home and Biz application. This is for wireless printers that are NOT web enabled. I've included a link below with some great information on how to get this resolved. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en &product=1153494&tmp_track_link=ot_search
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01930282&cc=us&dlc=en&lc=en &product=1153494&tmp_track_link=ot_search
I work for HP but my posts and replies are my own....Thank you! -
I tried to print airline tickets from my iPad. It failed withe note insifficient data. What do I have to do
Hey Jimlalak!
Were you trying to print them from the Delta Airlines app? If so, can you print from any other apps? If you can print from other apps then you'll want to contact Delta, but if you can't print from any other apps let me know what error message you get and I'll try to help you out further. If you aren't printing from an app and are just printing from your computer, make sure you can print other documents and contact Delta for further help.
Let me know if I can provide any more help!
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.
Maybe you are looking for
-
WARNING: Actions on button and MovieClip
I have the following code that I am trying to get to work with ActionScript 3.0: on (rollOver) { gotoAndPlay("s1"); on (releaseOutside, rollOut) { this.gotoAndPlay("s2"); on (release) { this.gotoAndPlay("s2"); The problem is that ActionScript 3.0 wil
-
Connecting my G5 to Betacam recorder
i need to export my work from (final cut pro 5) which will be brodcast to TV through BETA... and my question is ' 1- what is the best and reasonable price BETAcam recorder do i need and what are the connections required from to my Mac G5
-
Using Motu DP and Logic Together - More use of all cores on the PPC Quad
Since there's been some talk about how DP uses four cores on the PPC quad lately I thought I might add what I've been doing to take advantage of untapped processing power. If you have DP (I am running 4.5) you can run it alongside Logic Pro and use i
-
IB Failed to create Publication.
Hi All, I am facing an issue in IB that publisher from external source to peoplesoft that i am getting following error. "Failed to create Publication." Regards, Sabari
-
Open a different vi than the startup vi from a build application in LV2009
When building an application (exe file), I have to select a vi as "statup vi" in the build specification. This vi opens its front panel and executes when I execute the application. But I can still open the front panel of other vis by using a command