What do I need for Mic and Guitar?

I'm new to GB. I have ilife 11.
I've got a few electric guitars and a condenser mic (phantom power). What do I need to plug them into my Macbook Pro?
I don't want to spend too much money and am looking for something that works well, sounds good and is hassle free (plug and play) I just want to lay down some demos.
Something like this? It really does not have great reviews.
http://www.amazon.com/M-Audio-US44010-Interface-GT-Player-Software/dp/B00061ZM2Y
What do you guys and girls recommend? A little direction would be much appreciated!

If you can push your budget up to $249, you'd be doing yourself a HUGE favor. This gives you the ability to pick up the Apogee One. Apogee is a company that's well respected, and makes really good stuff. This has a mic input, guitar input, made for Mac. http://www.sweetwater.com/store/detail/One/
The M-Audio stuff gets pretty good as you step up into the higher priced models and the firewire ProFire stuff, but it's hard to beat the Apogee One as an entry level interface.
In my opinion, anything that costs less than $249 (the lower end M-Audio stuff) is simply not very good. If you're going to spend the money, make it worth it.

Similar Messages

Satelitte Pro A200 PSAE4E - What BIOS I need for update and how to do this?

Guidance please on A) the correct update version required B) the process
A) the machine came with Vista installed but it was down graded to XP to work on the Win2003/XP network.
The current bios Vers V5.20 do I upgrade to Vers 2.60 - win 32 (vista) or 5.60 Win
B) Toshiba FAQ - FAQ Ref.: TRO0000000b07 lists how to upgrade the bios unfortunately it does not list the Satelitte Pro A200 - so what is the procedure - thanks in anticipation.

Hi!
If you want to update the BIOS you need the version 5.60. The other version are for Vista and only 5.60 is for XP and so its the right one for you.
The BIOS update procedure is pretty easy. The update is Windows based that mean you can update it on Windows. Therefore extract all files from the zip archive and start the exe file. Then your BIOS will be updated.
But before you update it, close all running programs even your AntiVirus and Firwall and connect the AC/DC adaptor.
Good luck!
Bye

What do I need for Form and Report development

I have been doing backend development for about 8 years
Now I would like to learn Oracle Form
I bought an Oracle Form course book from Amazon and it only uses Form 6i and I downloaded and installed Oracle 10g on my laptop. What is the minium for me to get Oracle Form and Report up and running?
There are so many things to download and it is quite confusing
Thanks for your help
Sincerely

Oracle Developer Suite 10g (904) - link is on otn.oracle.com/products/forms - this give you Forms and Reports developer and a runtime as well.
Regards
Grant Ronald
Forms Product Management
http://www.groundside.com/blog/content/GrantRonald/

Just bought a new iPod touch 16G - I think it's a 5th gen. - I used my old iPod to record rehearsals. The new one is stating that my Belken mic is not compatible. Can I record with this new one? If so, what do I need for a mic?

Just bought a new iPod Touch 16G - (I think it's a 5th gen.). I used my old iPod to record music rehearsals. This new iPod is stating that my old Belken mic (with new adaptor) is not compatible. Does this new iPod Touch have ability to record audio? If so, what do I need for a mic??

Thanks very much! I found the app, tested it, and it sounds fairly lifelike. Big help!!

What licenses do I need for CUCM and CME

Hi Experts,
I am a newbie to Cisco IP telephony and request your guidance.
My boss has asked me to order some 7942 phones for a CUCM based site and some 7942 phones for a CME based site.
For CUCM 9, I understand that we need an enhanced user licenses on CUCM side.
For the IP phone, I see 2 part numbers and am confused.
CP-7942G - Cisco Unified IP Phone 7942G
CP-7942G-CH1 - Cisco Unified IP Phone 7942G, for Channels, with one station user license
What is the station user license mentioned in the part number CP-7942G-CH1 ? Is it the same as the enhanced user licenses? Assuming i am ordering enhanced user licenses, what should I order CP-7942G or CP-7942G-CH1?
I also see a part number SW-CCM-UL-7942= ? What is this part? is it needed?
And what do I need for CME?
Is FL-CME-SRST-10 enough for the CME?
What is the part number for the phones? Is it CP-7942G or CP-7942G-CCME?
I also see another part number "SW-CCME-UL-7942="? What is it? And is it really needed?
I heard that Cisco simplified Licensing from version 9. At least it doesn't look simple to me :(
Can you please help me, Experts?
Thanks,
Pete

Hi without knowing your business goals, current network, etc here is some feedback.
Depending on your design, if the sites are connected via a reliable WAN you could run the branch site as SRST and not CME, this way you get a rich feature set of the centralised call manager and simplify licenses, etc.
Anyway, you need to size your CUCME (or SRST) correctly as each Cisco router hardware platform has a maximum supported handsets. If you have a SIP provider new purchased ISRs now come with 10 CUBE licenses other wise you will need something else such as a VIC for dial tone.
For instance the following is a router that comes with 25 CME
C2901-CME-SRST/K9
2901 Voice Bundle w/PVDM3-16,FL-CME-SRST-25,UC Lic,FL-CUBE10
You can add CP-7942G-CCME which is the physical phone and license for CME
Use CP-7942G= for the Call Manager Deployment as you will get UCL Enh or CUWL for the user side
If you have existing routers you will need to obtain upgrade licenses for voice/CME add DSPs if needed for conferencing, media termination, etc, CUBE or voice cards and you can add the phones.
Router handset capacities see Table 7
http://www.cisco.com/c/en/us/products/collateral/routers/2900-series-integrated-services-routers-isr/data_sheet_c78_553896.html
Hope this helps

What charging adapters do I need for Finland and England

What charging adapters do I need for Finland and England

Bring the power adapter that you got with your phone - you just need to get an adapter for the plug into the wall. You don't need a converter.
Airports usually sell the adapters and stores that sell luggage often have them also.
~Lyssa

I have already bought a macbook pro in USA and I want to use it in Europe. What adapter I need for my Airport Extreme?

I have already bought a macbook pro in USA and I want to use it in Europe. What adapter I need for my Airport Extreme?

No power adaptor is needed as the power units are auto-switching. But you will need wall outlet adaptors such as you will find in Apple's World Travel Kit, at AAA stores, and other vendors.

Can someone tell me what settings I need for ipad texting. Went to Mexico and now can't get the texting to work at all on ipad. Thanls

Can someone tell me what settings I need for ipad texting. I went to Mexico and when I returned the texting does not work on my ipad. The support at Apple wanted to charge me to get info.
THanks

Can't address the problem directly, cause even though my iPad4 is Cell+Wi-Fi, I've never put a SIM in it and never had the need to text, SMS or iMessage, from it. When away from the office or home wireless network, I tether it off the iPhone. Skype, both text and video, work just fine thru the Wi-Fi link, though.
HOWEVER, when I was hashing out the contract details to get the iPhone 5 about 14 months ago at Telcel, the representative distinctly mentioned that both Visual Voicemail as well as iMessages would be included in the package and they would be mandatory cause "I was getting a (subsidized) Apple iPhone" on a 24 month leash. Then when the gizmo came out of its box for SIM installation and activation, she went thru the motions of making sure both were working properly. So I assume the carrier has some say in the matter.

What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit

What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit

Hi,
just found your post...
To install your HP1010 on Win7do the following:
Start
Devices & Printers
Add a printer
Adda local printer
Use an existing port: DOT4_001 (Generic IEEE...)
Next
Pick HP from manufacturer
Select HP LaserJet 3055 PCL5
Next
Name the printer something to your liking
Finish (or so, just follow the prompts)
Here you are!
Works every time for me, never had a problem from any application.
I don't know how this forum works and if i am notified if you reply or anyone else posts on this thread, so i try to check it again soon to check if you left a message. Be with me...
Matt

What is the need for setting property data inside the JMSMesage

Hi
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball");
and also please tell me how can the MDB recievies this property data ??
Thanks in advance .

raviprivate wrote:
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball"); Look at the detail JMS documentation on [Message Properties|http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/jms/Message.html] .
>
and also please tell me how can the MDB recievies this property data ?? MDB onMessage method argument is the Message object and if you look at the documentation, Message interface has getter methods to retrieve the properties.

Have an IMac 7.1, desktop system 10.4.11, 2.8 GHz, 4MB, 4GB. what can I upgrade to? What do I need to buy and how high can I go?

Have an IMac 7.1, desktop system 10.4.11, 2.8 GHz, 4MB, 4GB. what can I upgrade to? What do I need to buy and how high can I go?

You can replace one of the 2 GB RAM sticks with a 4 GB stick for a total max. RAM of 6 GBs.
Here are the specs.
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
Purchase reliable Mac RAM from online vendors Crucial or OWC (Other World Computing).
The highest OS X version you can go is OS X 10.8 Mountain Lion.
First, though, you need to purchase a retail disc version of OS X 10.6 Snow Leopard in order to download upgrade to OS X 10.8.
Purchase OS X 10.6 Snow Leopard here.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Use Software update, in OS X Preferences Pane to update to the latest version of OS X 10,6 Snow Leopard before upgrading OS to 10.8 Mountain Lion.
OS X 10,6.8 will install the Mac App Store icon in OS X's Application Dock.
From there, you can launch the Mac App Store and download and install OS X 10.8 Mountain Lion.
Use Sofware Update again to update to the latest version of Mountain Lion.
Be advised, you may want to play around in OS X 10.6 Snow Leopard before updating to OS X 10.8 Mt. Lion.
Some users aren't happy with the Hybrid OS X/iOS functionality of OS X 10.8 Mounatin Lion.
If you upgrade to OS X 10.8 Mountain Lion and aren't happy with it, the only way to return to OS X 10.6 Snow Leopard is wipe the internal drive, reformat it, then reinstall OS X 10.6 Snow Leopard.
You might want to consider purchasing an external FireWire hard drive, format it so you can install OS X 10,6 Snow Leopard and all of its updates onto the internal drive, use a copying/cloning app like Carbon Copy Cloner or Super Duper to make a duplicate of your internal drive to the external FireWire drive as a backup that you can reinstall onto your internal drive just in case you find you are not happy with the look and functionality of OS X 10.8 Mountain Lion.
Good Luck!

What do i need to uninstall and reinstall photoshop cs5 extended windows 7 32-bit?

what do i need to uninstall and reinstall photoshop cs5 extended windows 7 32-bit?

Photoshop CS5 Extended suddenly stopped recognizing my NVIDIA 3D card (NVIDIA Quadro FX 1800M). No 3D graphics will work in Photoshop. An Adobe online tech worked with me on it for about an hour. We concluded that I would go try to update the NVIDIA driver. The NVIDIA website is frustrating. The boxes to input my card model and system do not work.
Nawang uninstalled and reinstalled Photoshop (my question below was about how to do that, but he did it for me and that did not help.)
My card is 3D capable. I used Repousse 3D effect two days ago and it worked fine. Now it is not working, all 3D controls are grayed out.
Mark Harrison, Information Officer
Oklahoma Conservation Commission
2800 N. Lincoln Blvd., Suite 160
Oklahoma City, OK 73105-4201
Direct: 405.521.6787 Cell: 580.743.5709
Fax: 405.521.6686
[email protected]
http://conservation.ok.gov<http://www.conservation.ok.gov/>
Follow us on Twitter: http://twitter.com/conservation_ok

What does "played" mean for podcasts and tv shows?

What does "played" mean for podcasts and tv shows, in terms of the settings menu where you say to synch only "unplayed" shows? Does it mean you started playing it, or that it has played all the way through?
And how does this relate to the "dots" next to podcasts in the menu? These dots seem to go away when you start listening, but do not finish, a podcast. Is this the same as "played"?
Thanks!

You are probably seeing a USB cable under the iTunes icon. This means the Apple TV is having problems and needs to be connected to iTunes to be Restored. http://support.apple.com/kb/HT4367

I'm on 8.6 and want to upgrade to 10.3 - what do I need to know and watch 4

I'm on 8.6 and want to upgrade to 10.3 - what do I need to know and watch out for. I have a friend who lost all of thier i-tunes when they upgraded. I do not want that to happen. Will I loose other information ie - email addresses? Any suggestions and help are welcome for a smooth transition.

David, welcome to the discussions.
Look this link over and see if it answers your questions.
I would get anything you need to keep from OS8 on an external of some sort or back it all up so you can retrieve it.
http://discussions.apple.com/thread.jspa?messageID=607596
Don

What is Licensing Method for SCCM and SCOM 2012

What is Licensing Method for SCCM and SCOM 2012
We have 75000 clients, so we going to implement SCCM and SCOM 2012 environment in azure. Actually we plan to go for One Central Administration site and three primary sites (to manage this clients), going to host in Azure. I need to know how the licensing
process work for this environment, how many licenses we need to get for this? is charging for Client based, Site based or environment based? Please update.
Thank you
Fazal
Fazal(MCTS)

Hi,
Running the SCCM and SCOM servers themselves in Azure to manage clients outside azure is not really supported if I remember correctly..
http://blogs.technet.com/b/configmgrteam/archive/2013/10/23/configmgr-and-endpoint-protection-support-for-windows-azure-vms.aspx
Licensing is explained here.
http://www.microsoft.com/licensing/about-licensing/SystemCenter2012-R2.aspx
In short for Client OS you need a cal per client, included in Core CAL and Enterprise CAL.
For servers it is licensed per CPU and can be licensed for all virtual servers on a host as well, included in the guide above.
ps. side note a CAS is not really necessary in most case if you don't have more than 100'000 clients, it adds a lot of complexity and I would avoid it if I could.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

What do I need for Mic and Guitar?

Similar Messages

Maybe you are looking for