What do I need for my MAC PRO to connect to my wirelessrouter in my home

I have a Mac Pro 3.1 that i got from my old job.
I now want to use it for my main computer and internet access.
I have a PC that has my main modem and router in another part of house.
I want to use the MAC Pro for my other computer - but connect to router wirelessly.
Doesn't seem to be AIRPORT CARD installed in my MAC. Is that what I need to connect to the wireless router hooked up to my other computer?
Help! If that is what I need I can get it in NYC tomorrow - but I want to be sure I'm getting what is needed to allow my MaC to recognize the wireless router in other room...
Thanks.

The airport wireless card should look like this:
http://www.amazon.com/Apple-Wireless-Card-Mac-Pro/dp/B0012YYITW/ref=sr14?ie=UTF8&s=electronics&qid=1242362778&sr=8-4
Since you're going to the apple store, have them install it, as it's not the easiest thing to do.

Similar Messages

  • How do I know what battery I need for my MacBook Pro?

    Hello, Is there a way to find out what model the battery is that I need for my MacBook Pro without tearing it apart? I have the serial number and also the Hardware UUID, whatever that is. If I have to tear it apart I will, but I'm hoping to keep that to a minimum as I'm afraid to tempt fate!

    skink - thanks for the kind words.
    Depending on your model (check under the Apple menu, "About This Mac", "More Info...", "System Report..." and tell me your Model Identifier. Mine, for instance, says (under Hardware Overview):
    Hardware Overview:
    Model Name:    MacBook Pro
    Model Identifier:    MacBookPro8,2
    Depending on your model, a 'good' number of cycles might be as low as 300 or as high as 1,000. But if the condition is "normal," as you say (and as mine reads) you really shouldn't have anything to worry about.
    If it's a battery that needs to be replaced by an Apple tech, it's 'built-in,' meaning you can't just turn it over and change the battery (such was the case with my 2006 1,1 model and some models after that).
    It's always good to keep an eye on battery health and to use some methods of keeping your CPU load at a minimum when using battery power. Viewing movies, whether in the DVD player or those that are on your computer, will really tax your CPU and result in lower battery life. To maximize your battery life, try to have as few apps open as possible when under battery power - particularly those that drain your CPU. You can keep and eye on this by keeping Activity Monitor, in your Utilities folder, open at all times. If you see a process that's taking 10+% of your CPU load, that's an app you should close or at least keep an eye on - my Firefox browser will sometime get in the 13% range, but I don't worry about that.
    Battery use is, for me, primarily about Internet browsing and email. I keep open Firefox, Outlook, Activity Monitor, Word, Acrobat, Word, TextEdit, and a few other small apps and I generally get 7+ hours on battery time.
    I would also suggest using two little utilities to keep an eye on battery usage - one is "Battery Health" available at the App Store free. The other is gfxCardStatus which will let you use discrete graphics, changing your GPU to the less intensive processor. It's available at http://codykrieger.com/gfxCardStatus and is "Mountain Lion ready" as of it's latest release.
    Good luck - see how many more hours you can eke out of that battery before thinking about having it replaced. As much as I use mine, I know that I'm going to go over the 1,000 cycle mark before my AppleCare expires, so I know that I'm going to have to get it replaced. But for now, I'm getting the advertised hours and am quite happy.
    Regards,
    Clinton

  • What SCSI card do i need for new Mac Pro?

    hello all, can anybody give me a straight answer on the cheapest SCSI card I can buy from UK, to fit in my Mac Pro. I have googled and searched the forums and am getting confused by talk of all the different types.
    I have borrowed an old neg scanner, which is SCSI only. The guy gave me a SCSI card as well, but it came from a PC. I figured I would chuck it in the Mac and see if it recognized it. Cue epic fail, because it appears only to fit in "backwards". that is with the scsi port facing into the case.
    No big deal I thought, I'll just buy one. I had no idea it would be so complicated.
    Speed of connection is not an issue to me, I just want it to work!
    Please help, thanks in advance
    stu.

    Hatter, thanks for the speedy reply. Can I only put in an expensive SCSI card? Why don't the cheapo 50 buck ones work? Sorry for being dense...
    I hear your point about cheapo USB scanners, but the SCSI one i got was free! Just looking to archive my years of negs and want to keep the costs to a minimum. Will defo check out firewire adapters though. good call.

  • Lacie 4Big Quadra | eSATA Card Needed for 2008 Mac Pro

    I have a Mac Pro (2008) and have just bought a Lacie 4Big Quadra. I need an eSATA card to take advantage of the faster transfer rates. I'll be using the drive in RAID 1 as part of a backup solution.
    Can anyone recommend an affordable eSATA card which will work without succombing to the many warnings posted here and elsewhere?
    Any help would be much appreciated. :)
    Kind regards, Richard

    Well, you didn't define what is considered 'affordable' so here's my answer: OWC deals in reliable products that in my experience work well with Macs.

  • What is the soundcard for 2008 mac pros?

    I'm having some problems with no sound in the Windows Partition of my Computer and I'm talking to Windows people about it. They're asking me for the type of soundcard I have and I don't know that. What section of System Profiler tells me what the sound card is?
    :\

    The onboard sound uses the "Realtek High Definition Audio" drivers. You can either grab them off the DVDs that your Mac Pro came with or download them from Realtek's site:
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24& Level=4&Conn=3&DownTypeID=3&GetDown=false

  • What do I need for my MacBook Pro to work in the UK

    I am traveling to the UK.  Do I need anything special to plug it in for power being they use 220V there?  And if so, what will I need.

    Just get the appropriate plug. Either a converter from Radio Shack to go from the standard US flat-blade NEMA plug to the funny UK plugs, or the fancy Apple Universal Travel Kit from the Apple Store. The latter has all that you need to plug anywhere in Europe, should the yen arise to take the Chunnel Train and see the Continent.

  • What do i need on my mac pro to be able to access navy military sites???

    im having a very difficult time with accessing military sites on my macbook pro i have been able to gain access to majority of the sites but not all most important site at the moment is Nrows on the navy reserve site.

    Some of these sites require special client certificates. You may need to speak to your commanding officer.

  • What battery is needed for a macbook pro

    i have a 15 inch macbookpro and i don't know if i need to purchase a specific battery or if i can just order it to the store

    Hi Arturog
    You need a: LB1 High Performance Apple 661 4833 laptop battery 10.8v
    If you are feeling daring you can go here http://www.newegg.com/Product/Product.aspx?Item=9SIA1Y10P33668 and order it.

  • Do I need antiviral software for a Mac Pro notebook

    is antiviral protection needed for a Mac Pro notebook

    WARNING: "Avast" is useless garbage that will cause you nothing but problems.
    1. This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
    2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
    The following caveats apply to XProtect:
    It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets (see below.)
    It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
    3. Starting with OS X 10.7.5, there has been another layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't actually been tested by Apple (unless it comes from the Mac App Store), but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. For most practical purposes, applications recognized by Gatekeeper as signed can be considered safe.
    Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
    It can easily be disabled or overridden by the user.
    A malware attacker could get control of a code-signing certificate under false pretenses, or could find some other way to evade Apple's controls.
    For more information about Gatekeeper, see this Apple Support article.
    4. Beyond XProtect and Gatekeeper, there’s no benefit, in most cases, from any other automated protection against malware. The first and best line of defense is always your own intelligence. All known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
    That means, in practice, that you never use software that comes from an untrustworthy source. How do you know whether a source is trustworthy?
    Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
    A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
    Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
    Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
    Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe.
    5. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was never a good idea, and Java's developers have had a lot of trouble implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style "virus" affecting OS X. Merely loading a page with malicious Java content could be harmful. Fortunately, Java on the Web is mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice.
    Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers. In Safari, this is done by unchecking the box marked Enable Java in the Security tab of the preferences dialog.
    Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a specific task, enable Java only when needed for the task and disable it immediately when done. Close all other browser windows and tabs, and don't visit any other sites while Java is active. Never enable Java on a public web page that carries third-party advertising. Use it only on well-known, password-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
    Follow these guidelines, and you’ll be practically as safe from malware as you can be.
    6. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. If you need to be able to detect Windows malware in your files, use the free software ClamXav — nothing else.
    Why shouldn't you use commercial "anti-virus" products?
    Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
    In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
    By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
    7. ClamXav doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
    ClamXav is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
    A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
    ♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
    ClamXav may be able to tell you which particular virus or trojan it is, but do you care? In practice, there's seldom a reason to use ClamXav unless a network administrator requires you to run an anti-virus application.
    8. The greatest harm done by anti-virus software, in my opinion, is in its effect on human behavior. It does little or nothing to protect people from emerging threats, but they get a false sense of security from it, and then they may behave in ways that expose them to higher risk. Nothing can lessen the need for safe computing practices.
    9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.

  • Do I need a specific Mac Pro video card or will any do?

    Hi, I had a quick question. I'm looking at purchasing a 2010 8-core Mac Pro and was wondering about the video card. Is there a specific video card needed for the Mac Pro or can I purchase just a typical ATI 5870 from ebay and install that? Is there really a difference between a PC graphic cards and a Mac graphics card?

    Stick to the Apple cards. There is an important difference, and that is non-Apple cards do not work until the startup sequence is completed unless you use them on VGA. That means you cannot use any normal startup keyboard shortcuts unless the card is in VGA mode. This is because non-Apple cards do not have the Apple bootable ROM.
    Apple sells the 5870 directly on their website. And, there's nothing wrong with the 5770 card that comes with the Mac Pro. Be sure you really need the performance of the 5870 before spending the extra money for it.

  • I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?

    I just replaced the hard drive for my Mac Pro, and I am trying to restore what is on my Time Capsule, but it wont connect, and only is giving me the pinwheel of death. What do i do?

    You will need to boot from some alternate boot device to accomplish this, if you did not initialize the drive before installing it.
    If you have another Mac, you may be able to use FireWire target disk mode.
    If your MacBook has a DVD reader and you have a Mac OS X Installer/Utilities DVD, such as the one that shipped with it, you can boot from that DVD, answer only the "what Language" question, and wait a quarter minute for the MenuBar to be drawn. Then examine the Utilities menu or the Installer menu and Find Disk Utility.

  • What is needed in a Mac Pro to start developing APPs?

    I am looking for information on what Mac Pro (processor speed, memory, and storage capacity) is needed to start developing APPs.  In addition, I would like my Mac Pro be viable for the next three years as I learn how to use the system to build APPs and learn basic applications to build APPs as I anticipating changes in the iOS system and programs like Mountain Lion that could use more memory and storage capacity.  I am beginning this journey and like to know what system would best fit my needs as Apple continues to progress in their technologies.  What should I get in a Mac Pro with 8GB or 16GB, i5 or i7 processor, 256GB or 512GB storage, and 13 in. 2.8GHz or 15 in. 2.5 GHz?
    Thank You

    You could buy a new MacBook Air every two years and still come out ahead of what a base Mac Pro costs.
    A Mac Pro is not going to go out of style in 4 years.
    laptops or their parts are not upgradeable and do tend to fail a bit more. And some of those systems limit you to 16GB RAM but they do have (slower) M.2 SSDs (400 or 700MB/sec vs 1200-1400MB/sec) SSD blades.
    If you want to run lots of code and VMs then maybe by accident you are in the right place
    MacBook Pro

  • What is a recommended internal hard drive for a Mac Pro 1,1 (2006)?

    What is a recommended internal hard drive for a Mac Pro 1,1 (2006) model? I would like to
    add more hard drive space by utilizing the three available slots. However, from my understanding,
    Apple does not produce hard drives for my older computer so I'll need to turn to a third party.

    You are very much over-due for some new larger more efficient drives.
    the most common best approach goes something like this....
    SSD 120GB for system
    WD Black 1-2TB for data (and  put all your data and media files, all your home account sub-folders)
    Backup. I use WD Green but use what you want. I have a small boot volume, TimeMachine, and 3rd that is a clone image of the boot drive volume.
    Very fond of WD 10K VelociRaptor drives. Not much louder now than the WD Black 2TB, $100-200 for 250GB to 1TB.
    You can use any size SATA 3.5" drive, most now are 1TB and up to 4TB.
    You should have always bought Amazon or Newegg or outside of Apple, Apple can often charge 3x what those places charge.
    Probably want to add or replace FBDIMMs you have, these are excellent and price in the last year has fallen.
    2x2GB FBDIMM DDR2 667MHz @ $29
    http://www.amazon.com/BUFFERED-PC2-5300-FB-DIMM-APPLE-Memory/dp/B002ORUUAC/
    WD Black 1TB $93
    http://www.amazon.com/Western-Digital-Caviar-Internal-Desktop/dp/B0036Q7MV0/
    WD Green 3TB $149 - backup
    http://www.amazon.com/Western-Digital-Caviar-Green-Desktop/dp/B004RORMF6/
    WD VR 10K 250GB $103 200MB/sec boot drive :
    http://www.amazon.com/gp/product/B007V5A1BK/
    Those last and last and make a nice boot drive.
    SSD: Samsung 840 128GB
    http://www.amazon.com/Samsung-Series-120GB-internal-MZ-7TD120BW/dp/B009NHAF06/
    Over-due to upgrade and replace the graphic card most likely it sounds like also:
    ATI Radeon 5770
    http://store.apple.com/us/product/MC742ZM/A
    http://www.amazon.com/Apple-ATI-Radeon-5770-MC742ZM/dp/B003Z6QH6M
    http://www.bhphotovideo.com/c/product/726537-REG/Apple_MC742ZM_A_ATI_Radeon_HD_5 770.html
    Your OEM 7300GT isn't helping now and with Lion or the X1900 dust magnet and out of date too. If you have a functional 8800GT still working you are lucky and no need.

  • What model of Airport Extreme Card for 2007 Mac Pro 2.6GHz

    I am trying to find what model of Airport Extreme Card I need to install into my 2007 Mac Pro 2.6GHz
    I understand that there is a 2008 card which is incompatible, so I don't want to buy the wrong one.
    Any help appreciated.
    Laus.

    Its really confusing when Apple calls their internal wireless card on a Mac an AirPort Extreme card......and they also market an outboard wireless router called an AirPort Extreme.  See info below:
    http://www.apple.com/airport-extreme/
    You posted in the support community for the Apple wireless routers.....AirPort Express, AirPort Extreme and Time Capsule.
    While it is possible that someone here might be able to answer your question, you will likely receive a much faster and more informated response if you post your question again in the support area for the Mac Pro.
    The link to that support area is here:
    Mac Pro

  • What is the best blue-ray drive for my Mac Pro????

    What is the best blue-ray drive for my Mac Pro????
    I wanted a BWU-200S but it says windows only i called apple
    and all they could tell me was logitech....wouldn't tell me a model
    or anything.
    I would really like one that does all the formats and feature that the
    Sony BWU-200S does.
    I read that the BWU-200S might work in the mac pro it just only comes with
    windows software. If anyone has tried this let me know please i need this soon.

    This site makes Mac compatible Blueray drives:
    http://store.fastmac.com/index.php?cPath=10252
    The questions to ask them is:
    1. Which applications can be used to burn bluray movies from it?
    2. Which applications can be used to playback commercial bluray from it?
    3. Does it let you burn DVDs from iDVD, iTunes and the Finder as well as CDs and CD-RWs?
    4. Does it support both DVD-R DL and DVD+R DL for burning and playback?
    5. Does it allow for booting from the system installer that shipped with the machine and running the hardware test that shipped with the machine?
    6. Do you get to keep the original optical drive in case you want to troubleshoot if system issues are due to their drive?
    Some of these may already be on the website, I just haven't taken the time to look it completely over.
    Message was edited by: a brody

Maybe you are looking for

  • Issue with Export / Import Configuration Data in AC 5.3 migration to AC 10

    Hi, We are migrating from AC 5.3 to AC 10. As per the Migration Guide I have exported the data from AC 5.3. The export created around 57 files on the destination with .dat extension. Moved these files to target server Import location. Then I have use

  • How to change the width of ABAP editor...???

    Hi all,         Can anyone let me know to inc+/dec- the width of coding span of ABAP editor.? Thanks & Regards, Rajeev

  • Sender http adapter - decoding (URL unescape)

    PI 7.0 Incoming http request in XI is URL decoded. Currently I am using java mapping to decode it. Is there a way to set any adapter specific properties in sender http adater so that I can avoid the java mapping for decoding. Or any settings in SICF?

  • ORA-31185 DOM NODES DO NOT BELONG TO THE SAME DOCUMENT

    Hi all, I developed an Oracle function that returns a XMLTYPE. In this function, I first created a node <ROOT> and I would like to append children nodes to this root node. To create children nodes I loop on a cursor and each iteration of this loop "b

  • Using a iMac to bridge ATV and TC

    Hi all, I am after a bit of advice.. My current network set up is a TC in the office connected to an ADSL router for the internet. My iMac is in another room and has a strong signal to the TC. I have just purchased a ATV and where my TV is situated t