What do I need to build a multidrive enclosure?

This is what I want.. 3 drives to show up on my iMac as..
1 drive for old projects
1 drive for current projects (I want this to be 2 drives at RAID 0)
1 drive for a scratch disk
I want to put all of these in a single enclosure with a single cable going to my iMac. If I'm correct, I cannot do this with a simple drive enclosure because iMacs do not have a raid card. Is that true? If so, what are my options to buy?

This http://eshop.macsales.com/shop/Thunderbolt/External-Drive/OWC/ThunderBay-IV is nice. Set the RAD array up using Disk Utility.

Similar Messages

What do I need to build a minimal Cisco videoconferencing system?

I'm trying to figure out what I need to build a videoconferencing
system.
I already have:
Main site with a Cisco 3825 w/ Adv IP 12.4, where I expect I'll have 5
- 10 users who will regularly use a videoconferencing system
Remote site with a Cisco 2811 w/ Adv IP 12.4, where I'll have 3 - 5
users
I'll be adding 5 - 6 additional remote sites with 2811s, with 3 - 5
regular users each.
Everyone will be connected across T1s and IP.
I though I could just use MeetingPlace Express, but I've just realized
that MPE is for voice and web conferencing only, and has no video
component.
So I'm trying to figure out all the bits and pieces of MeetingPlace,
and I just can't work out what I truly need. If I'm half-way on track,
a 8106 30UL IP Bundle will get me started, but I'll also have to buy a
Media Convergence Server AND a Cisco Unified Videoconferencing 3515 AND
the Video Integration software, not including any goodies like Outlook integration or sufficient web
conferencing licenses.
Is there anything else I'm missing? Or am I way off base, and MPE will
work just fine? I sure would appreciate the advise.

Hi. It sounds like you've gotten further than I have. I'm lost regarding where to go from the camera. I thought Cisco had camera's and screens for a complete solution. I am lost. I believe I need a 3500 series device but how it connects to the LAN, I am very confused about. Do I need to buy a camera and microphone from another vendor?

What DAQmx files needed to build installer?

I have compiled an executable and am trying to compile an installer for a LV8.5 program. On the client computer, it must communicate with DAQmx hardware. Build parameters automatically include a path (almost to) LV 58. runtime. I want to include DAQmx 8.8 and do not know exactly what files (directories) need to be referenced. v8.8 resides on the development computer. If someone has a build that includes DAQmx, could you take a snapshot of the include box and post it here?
Labview 8.5
Meas Studio 2008

It sounded so easy when I read it that I was actually excited. But.... I checked the box for DAQmx and pointed it toward the ProductCache directory. LV was not happy about that. It requires a file not a directory so I got an error message but it continued. When I clicked build
it asked for the DAQmx disk. Then it asked for a Measurement Studio 8.5 for VS 2008 disk. How did it even know I had this? What if I didn't? I'm trying to build a Labview program, not MS. Well it sort of allowed me to continue but this is the result.
Also it did not write the DAQmx files to the ProductCache.
CDK_Build_Invoke.vi.ProxyCaller >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi
>> CDK_Engine_Build.vi >> CDK_Engine_PromptForMissingDist.vi >>
NI_MDF.lvlib:MDFDistCopyList_CopyItem.vi
Loading product deployment information
Loading product deployment information
Adding files to installer
Done adding files
Preparing to build deployment
Copying products from distributions
Copying distribution 'NI-DAQmx 8.8, Disk 1' from: E:\ to: D:\My Documents\
LabView Projects\Builds\Valve Dr 05.01\VDr Installer\
Copying distribution 'NI Measurement Studio 8.5.0 for Visual Studio 2008' from:
E:\VS2008\ to: C:\Documents and Settings\All Users\Application Data\National
Instruments\MDF\ProductCache\
*** Error: Windows SDK function returned an error. (Error code -12)
The system cannot find the path specified.
*** End Error Report
Done building deployment
Labview 8.5
Meas Studio 2008

What do i need to build this clinical image app.?

I need to develop a web based tool which can be used in the field of clinical reaserch imaging.
I have a brain mapped coordinates of an animal and i want to register or overlay an MRI image probably a greyscale images and find out the impact and coordinates of impact on an brain image. basically something like geography system where you show the 3D depth of a surface.
What flash solution do i need ?
Let me know i will further explain this.
Thanks,
Anand

If internet-wide accessability is important, it would probably be a mistake to use anything other than JSP/Servlets to generate simple HTML forms. To date, this has been the formula for success for every significant effort at web-based business. The large majority of clients are using older machines on dial-up connections: conditions that tend to make fancy client interfaces difficult to implement, even in a homogenous environment.
Hope this helps...
hi,
i want to build a site like www.amazon.com (but not
for books :) )
there are forms that the user fills, then , I validate
the form's fields , produce dynamic pages depending on
the user's request , these dynamic pages include the
products information and images which have been got
from an oracle database.
i think of using JSP or Japplets or servlets
but I'm not sure about the difference between them and
which one is the best for my site.
Waiting for your help and any other suggestions :)

What programs are needed to build facebook games?

I want to build a facebook game similar to Monster Legends. It will have turn based pvp, leader boards, guilds, leveling, rankings, quests, various currencies, teams, jobs/professions, vendors, story modes, customizable characters, customizable skill sets, skill trees, various drop rates eg. low and high chances of certain items dropping from kills. What programs are required to create a game like this? Can it be done using only Adobe products?

omorfidesign wrote:
I want to build a facebook game similar to Monster Legends. It will have turn based pvp, leader boards, guilds, leveling, rankings, quests, various currencies, teams, jobs/professions, vendors, story modes, customizable characters, customizable skill sets, skill trees, various drop rates eg. low and high chances of certain items dropping from kills. What programs are required to create a game like this? Can it be done using only Adobe products?
Have you ever developed a game before? I only ask because there is a lot involved in doing so and you listed a long list of features you wish to accomplish. The game you mentioned was developed by Social Point, most of their games are for Facebook as well as a few for iOS, you can begin to see some of the technologies they leverage by looking at their job openings. They mention things such as: Illustrator, Flash, C++, Lua, Java, Air, Actionscript, MySQL, Apache, PHP, Python, PHP, Ruby, etc., and no doubt more is involved as well.
As you can see a lot goes in to games such as these. If you wish to try and leverage Flash you would need to learn and become very proficient with AS3 if you are not already familiar with it, you would also need to also know or learn backend technologies for your leader boards, etc., Again there is a lot involved with this type of development. Of course I am not trying to discourage you but want you to know the road ahead may involve a lot of learning as games themselves can be very sophisticated applications regarding development.
Here are some resources for Flash that may get you started if thats the direction you wish to take:
http://gaming.adobe.com/
http://gaming.adobe.com/technologies/gamingsdk/
http://gaming.adobe.com/technologies/flascc/
http://www.adobe.com/devnet/games/articles/getting-started-with-facebooksdk-actionscript3. html
http://www.adobe.com/devnet/flashplayer/stage3d.html
There are other possible alternatives also besides Adobe products such as Corona SDK, etc..

What do I need to build & deploy a Flex/Coldfusion standalone app?

I have been a CF developer for almost 10 years, but have no experience with Flex. I have a new opportunity to create Windows-based standalone applications. I have investigated .NET and I am not impressed as it just seems to be needlessly complex and bloated. Instead, I am considering leveraging my CF experience and taking a serious look at Flex with ColdFusion.
My application needs to run on PCs that are located on boats at sea. Their only connection to the Internet is via a satellite modem. The standalone app. needs to have data entered, which is stored in a local database. When the skipper is ready, he/she will switch the modem on, transmit the saved data (takes about 10 seconds) and switch the modem off. This means that the application code, runtime environment, database, and services (e.g. ColdFusion cfcs) must all be loaded on the PC. Also, I do not want the application to run in a web browser (many boats have old versions of Windows and IE).
I understand that I should be able to do this by using the AIR runtime.
Here are my questions/challenges:
1.) The application itself must be provided free of charge. Would I be required to purchase a ColdFusion licence for each installed copy of the application?
2.) If I would have to pay a licensing fee for each CF installation, will Flex 4 work with an open source CF engine such as Open BlueDragon or Ralio instead?
3.) Any suggestions regarding the database that I should use (e.g. Derby, H2, SQL Server Express)?
4.) Installation must be simple. Skippers must be able to download an installation file (e.g. an .exe) and run it. The install program must install the database, the latest Flash player for Windows, the CF engine, and the generated .swf files, cfc files, etc. Can all of this be bundled up when FlashBuilder and/or AIR prepares an application for deployment? When the application is run, it must start the database engine and the CF engine in addition to the Flash front-end.
I'm eagerly await your answers with fingers crossed. This project has the potential to create a very cool, unique application!

Hi Paul, thanks for the quick reply.
We have created the onboard app., but not in Flex. It is written in ColdFusion (version 8) with AJAX and uses an Apache Derby database and Open BlueDragon as the CF engine. The whole thing runs in a browser onboard. We had a custom Java launcher written. It starts the database and Open BlueDragon and then launches the PC's default browser with the localhost URL of the application home page. The biggest drawback with this whole approach has been browser compatibility. Some boats still use IE version 6. Our application simply won't work on versions IE prior to 7.0. It also takes quite a while for the launcher to start up all of the related applications, etc. The application runs more slowly than it would as a desktop application since web pages have to load as the user moves from one screen to another.
I am investigating whether we should re-write our application from scratch using Flex/AIR. My hope is that that we can put together all of the parts of the application in a single, standalone environment. Through some investigation, I have just realized that AIR includes SQLLite, so we won't need a separate database/launcher. We also won't need to use AJAX since the Flash will provide a UI that has all of the flexibility that we'll need. I also assume that the AIR runtime will include a standalone Windows Flash Player, so we don't need to use whatever web browser is on the boats.
So far, everything sounds great. My only remaining question is whether I could create the data access services as ColdFusion CFCs without having to install ColdFusion on the onboard PCs. I've been looking through the Adobe literature and it seems to imply that AIR can use ColdFusion 9 CFCs without CF being installed, but I cannot find a definitive statement on this. If this is the case, I will download CF 9, CF Builder, Flash Builder, and AIR and start learning and building right away.

What do I need to build this site?

hi,
i want to build a site like www.amazon.com (but not for books :) )
there are forms that the user fills, then , I validate the form's fields , produce dynamic pages depending on the user's request , these dynamic pages include the products information and images which have been got from an oracle database.
i think of using JSP or Japplets or servlets
but I'm not sure about the difference between them and which one is the best for my site.
Waiting for your help and any other suggestions :)

If internet-wide accessability is important, it would probably be a mistake to use anything other than JSP/Servlets to generate simple HTML forms. To date, this has been the formula for success for every significant effort at web-based business. The large majority of clients are using older machines on dial-up connections: conditions that tend to make fancy client interfaces difficult to implement, even in a homogenous environment.
Hope this helps...
hi,
i want to build a site like www.amazon.com (but not
for books :) )
there are forms that the user fills, then , I validate
the form's fields , produce dynamic pages depending on
the user's request , these dynamic pages include the
products information and images which have been got
from an oracle database.
i think of using JSP or Japplets or servlets
but I'm not sure about the difference between them and
which one is the best for my site.
Waiting for your help and any other suggestions :)

Need to build a computer but I don't know what questions to ask

I've finished a couple semesters in school studying After Effects, Premiere, Photoshop, Illustrator, etc. I'm about to start moving forward in producing some video content and forming a career around it. I purchased a copy of Adobe CS6 production premium and I need to build a computer to run it on. I'm willing to pay for quality but I don't want to overspend. I'm a geek but have been out of the "Performance PC Game" for so long now that I don't know where to begin. Most of my work will be in After Effects and Premier editing video (mostly that I will shoot myself on a quality undetermined model camera).
I want a computer that is powerful enough to keep up with me as my skills grow. I also want to build it from the ground up. Money isn't as much as an issue for me as long as I don't have to upgrade in a year from now. If you were going to build a new box and wanted to "spend smart" what would you build? I know the first thing you are going to ask me is my budget, but it varies. I'd like to spend under $2k (not including monitors) but if I need to go over that, so be it.

You need to thoroughly read Harm's Tweakers Page on out PPBM7 web site.
What media are you going to be editing?
If you want the latest and greatest (longest life cycle) there will be a new generation of high end CPU's and chipsets introduced by Intel, I have heard, this mid-September. It is the Haswell-E CPU and the X99 chipset.
The CPU will be available in 6-cores and 8-core versions. While tending towards expensive a low end version of this new generation would be a great long-term investment. The low-end Hasewell-E CPU chip is the i7-5820K has a pre-order price of $426.
The DDR4 memory will (at least initially) will be more expensive but is much faster and again will be around for a long time whereas the current DDR3 will start becoming obsolete. You can possibly start out with minimal memory (DDR4 is now available in 4, 8, and 16 GB modules) at least the 8 GB size so you have the option to easily add more memory as you get into more complex processing.
Get yourself a small (128 GB) good SSD for your OS/Applications and at least one other good SSD plus a large hard drive as a good starting point. Good SSD's have great write rates like the Crucial M550 and the Samsung 840 Pro.
The new X99 chipset motherboards offer great expansion capabilities with many more PCIe lanes than the current quad core CPU motherboards so your options for future upgrades are wide open. Many new X99 motherboards will have an M.2 connector on the motherboard and/or SATA Express connectors which are great advances in the new higher performance SSD's that remove the bandwidth limitations of SATA 6Gb/s. In the not to distant future we are talking (very expensive) SSD's the will have up to 3000 MB/sec read speed!

What are the parts needed to build an iPhone 4s

Since iPhone 4s tend to be expensive I have took it upon myself to make the iPhone 4s using parts. My opinion is that it's way cheaper! So can someone guide me by telling the peices needed?
Thank you for your time (:

Many of the parts listed, such as the logic board, A5 chip, etc. are restricted by Apple. You could hire someone to break into the Foxconn plant and steal the parts for you, but that isn't safe, or legal, or even ethical. Not to mention expensive.
What you will need to do is wait until there have been enough broken phones sold for parts and then buy them from a 3rd party company. Buying all the parts for the 4s shouldn't cost you more than $800 to $900 by then.

Need Help Building a Graphic Design/Video Editing PC

Greetings everybody, my name is David, and I'm hoping to get a little assistance building a computer system either from scratch or from a couple of computers I have picked out.
I hope this that doesn't sound unrealistic but I only have around $600 in my budget to build a Graphic Designer machine. My intentions are to get a subscription to Adobe cloud so I would have access to all of Adobe CS6 products. (I won’t be using any of the Touch or Game developers applications.)
I would like to post two links to two machines that I picked out that are in my price range and would like some advice as to whether or not either one of these machines have enough processing power to be able to handle all Adobe CS 6 products.
I am aware that neither one of these machines have a Graphics Processing Unit (GPU) and that I would have to purchase one and add it. Which leads me to my first question; are the processors on either one of these machines capable of handling a GPU that is on the Adobe recommended list for processors?
And secondly, if I were to build a machine from scratch, is $600 enough to build a machine that is capable of handling Adobe CS6 products? When building a machine from scratch can you tell me what the minimum requirements are for a motherboard? Or are there any sites that offer specific advise for building PC's for graphic design?
I noticed after looking through the list of recommended graphics processing units that the majority of those are very expensive, in the $500-$3000 range. Can you please recommend a graphics processing unit that is in the $200-$300 range that would be fully adequate to handle Adobe products? Also what things do I need to take into consideration when building the machine from scratch to ensure that all my hardware is capable of handling Adobe CS6 products.
What do I need to add to either one of these prebuilt computers to make them Adobe-ready, If they are in fact worthy at all?
Here are the links for two machines that I have picked out:
http://www.costco.com/HP-Pavilion-p6t-Desktop%2c-Intel%C2%AE-Core%E2%8 4%A2-i3-2130-3.4GHz.product.100010197.html
http://www.costco.com/ZT-Desktop%2c-Intel%C2%AE-Core%E2%84%A2-i5-3470- 3.2GHz.product.100027436.html
I do realize that neither one of these machines have a graphics card in them. Can you tell by looking at the specifications on either one of these machines, whether or not your typical graphics card would fit inside the case If they are indeed worthy in all other respects?
And I realize that I mentioned that I only had $600 to spend, however if either one of these prebuilt machines are powerful enough in all other respects, I don't have an issue waiting a month or two before buying the graphics card and installing a little bit later.
Thank you in advance for your input.
Sincerely,
David

Your HP Costco link results in an out of stock message
Your ZT Costco link is very likely NOT expandable due to the VERY small power supply... so you will likely NOT be able to add a video card later
For PPro video editing you want an nVidia graphics adapter http://www.pacifier.com/~jtsmith/GPU.HTM and even the low power nVidia may be too much for that computer
Also, for video editing, you need a MINIMUM of 2 hard drives... and trying to edit HiDef video with an i5 will be a study of waiting for things to happen
As Harm said... a $600 computer will work for everything EXCEPT video editing
This DIY list is just about twice your budget, but it will work for video editing
Intel i7 3770 CPU
http://www.newegg.com/Product/Product.aspx?Item=N82E16819116502
Motherboard
http://www.newegg.com/Product/Product.aspx?Item=N82E16813121599
16Gig Ram
http://www.newegg.com/Product/Product.aspx?Item=N82E16820148600
Mid-Tower Case
http://www.newegg.com/Product/Product.aspx?Item=N82E16811129042
750w Power Supply
http://www.newegg.com/Product/Product.aspx?Item=N82E16817171053
500Gig Drive
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136769
500Gig Drive
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136769
1Terabyte Drive
http://www.newegg.com/Product/Product.aspx?Item=N82E16822236339
GTX 660 Ti 2Gig
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130809
120mm x2 Case Fan
http://www.newegg.com/Product/Product.aspx?Item=N82E16835103060
Keyboard & Mouse
http://www.newegg.com/Product/Product.aspx?Item=N82E16823109232
Sata DVD Writer
http://www.newegg.com/Product/Product.aspx?Item=N82E16827135204
http://www.newegg.com/Product/Product.aspx?Item=N82E16832116986
Use Win7 64bit Home if you will NEVER go over 16gig ram
http://www.newegg.com/Product/Product.aspx?Item=N82E16832116992
Use Win7 64bit Pro to use more than 16gig ram
BluRay writer if you want to write BluRay discs
http://www.newegg.com/Product/Product.aspx?Item=N82E16827106369
2 hard drive MINimum, I use 3 (as listed above)
My 3 hard drives for video editing are configured as...
1 - 320Gig Boot for Win7 64bit Pro and ALL program installs
2 - 320Gig data for video project files, and temporary files
When I create a project on #2 drive, the various work files follow,
so my boot drive is not used for the media cache folders and files
3 - 1Terabyte data for all video files... input source & output export files

Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...

Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...
So only one imac, only one ipad..and so on simultain.
More over, all the divices are conect through wifi to air base but are not receiveing internet as i told above.
I need to disconnect one device to have internet on the second one from the same type!
Could somebody help me?
Many Thnaks,
dan

If your network configuration is:
Cable modem > (Ethernet cable) > [WAN] AEBS > (wireless) > Macs, then
AirPort Extreme Base Station Setup (AEBS) w/High-Speed Cable Modem
Modem/Router Power ReCycling
- Power-off the Cable modem, AEBS, & computer(s). (If possible, leave the modem off overnight.)
- Power-on the Cable modem; Wait at least 30 minutes.
- Power-on the AEBS; Wait at least 5 minutes.
- Power-on the computer(s)
Perform a "hard" reset of the AEBS.
- (ref: http://docs.info.apple.com/article.html?artnum=107451)
Setup the AEBS
With the network components powered down, set up the AEBS, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, try these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- AirPort Network Name: <whatever you wish or use the default>
- Create a closed network (unchecked)
- Wireless Security: Not enabled
- Channel: Automatic
- Mode: 802.11b/g Compatible
Internet tab
- Connect Using: Ethernet
- Configure: Using DHCP
- WAN Ethernet Port: Automatic
Network tab
- Distribute IP addresses (checked)
- Share a single IP address (using DHCP & NAT) (enabled)
Once you verified that you can get Internet access for all of your computers, you should secure your wireless network. To do so, I suggest that you make these changes:
AirPort tab (optional)
- Create a closed network (checked)
Change Wireless Security
- Wireless Security: WPA Personal
Base Station Options - WAN Ethernet Port
- Enable SNMP Access (unchecked)
- Enable Remote Configuration (unchecked)
- Enable Remote Printer Access (unchecked)
Wireless Options
- Transmitter Power: 10%
Access Control tab (optional)
- + <add the computer(s) that will access this wireless network>

What are the requirements to build a live video chat application?

I am looking into making a live video chat application. I
have seen several examples on the web so my question is not "how"
to do it. My question is "what do I need" to do it?
It seems that all the examples use Flex Data Services and
then some sort of back-end communication server. The cost of FDS is
well beyond what the client can afford so my question is: is it
necessary? Is there a way to build this sort of application without
FDS? Can I get live video streaming to work using only what is in
the SDK? I know nothing about data streaming, real-time
communication, etc. and have no idea how to implement this outside
what I have seen in the online articles so far.
If there are any other forums that are more appropriate to
this question, please direct me there. It is not a FDS exclusive
issue and I am just starting to look into it. I am starting here
because we would like to use Flash Player for the client-side
application.

I am looking into making a live video chat application. I
have seen several examples on the web so my question is not "how"
to do it. My question is "what do I need" to do it?
It seems that all the examples use Flex Data Services and
then some sort of back-end communication server. The cost of FDS is
well beyond what the client can afford so my question is: is it
necessary? Is there a way to build this sort of application without
FDS? Can I get live video streaming to work using only what is in
the SDK? I know nothing about data streaming, real-time
communication, etc. and have no idea how to implement this outside
what I have seen in the online articles so far.
If there are any other forums that are more appropriate to
this question, please direct me there. It is not a FDS exclusive
issue and I am just starting to look into it. I am starting here
because we would like to use Flash Player for the client-side
application.

Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?

Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?

Are you trying to install the 32-bit version on a 64-bit machine, or vice versa?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

How do I determine what xtras are needed?

From the searching I have done it appears that xtras equired are mostly trial-and-error.
Is there an efficient way to determine what xtras are needed for each lindividual movie?
My programs are divided into a series of sequential movies. At the end of each movie
there is a goto statement to launch the next movie. Does that require me to determine
xtras for each separate movie?
In a perfect world there would be a way for Director to search a folder for and present an aggregate list of all xtras required for that set of movies.
If no such method exists, what is the recommended hunt and peck system?

Thanks for the response, rduane. But I refer to the procedures as a bit random for the reasons you mentioned in your explanation. For example, you stated that, "Director will normally add all of the Xtras that you need to each movie as you build it". And, yes, I know that it does add some automatically. But, if Director really does "add all of the xtras that you need to each movie as it is built", how could I ever jump to one that is missing a needed xtra? If it needs it, why wasn't it added when it was built?
So, that's the reason I mentioned "trial and error", and "hunt and peck". The system is not reliable in its handling of xtras, or which ones are needed where. I am familiar with workarounds such as going to each movie and selecting Modify>Movies>Xtras to see which ones Director has added, But that is all it tells you. It does not tell you if it has added all the xtras "needed". And when the error message comes up, it does name the missing xtra, but not which movie needs it. So, one has to go find the named xtra and copy it over to the Xtras folder.
At least, that's what I do to fix it. But I asked the question because I wanted to know if Xtras handling itself is unreliable, or if I'm doing something incorrectly.
Dewey-+

About what can i do for building exchange server

hi ,
i want to know any thing about building new exchange server in my comapny and i want to know some issues about this
- if i build this server in my company and buy server hardware how much of the exchange licence that support 50000 users
and also what meant by " this plane support 1 to 100 mailbox ?? " this means it support from 1 to 100 users ????
- and also what is the best brand of servers that can i use it in my company
50000 user will be in the future not now but i want to know the licence that support this number of user
and i want every user is maximum 2 GB mailbox
also i want to know what the bandwidth should i use for this issues from internet service providers ???
i wand to know general information also with links for each questions that i asked not detailed information
and prerequisites software needed to build this system ??and also prices
thank you and goodbye

what meant by " this plane support 1 to 100 mailbox ?? " this means it support from 1 to 100 users
Call volume licensing expert at Microsoft to help you figuring out this...
Volume License Site: http://www.microsoft.com/licensing/
Blog |
Get Your Exchange Powershell Tip of the Day from here

What do I need to build a multidrive enclosure?

Similar Messages

Maybe you are looking for