What do I need to do to have my iTunes run on any operating system from my external hard drive?

I've already moved everything from my computer to my external hard drive, but for some reason I'm having a hard time being able to open the iTunes program every time I'm trying to open it on a different computer. I'm having to continuously uninstall and reinstall to be able to use it. I use my computer at home mostly but i also use my friends computer, and sometimes computers at school. Are there any files or anything that would enable be to be able to use it on any operating system or how can I get it working?

Draeon wrote:
You need to run the install file on the computer fresh as though you were installing itunes to the computer for the first time. Direct the installation to occur on your portable drive instead of in the typical destination folder (In the case of windows)
No, no, no... that is extremely bad advice.
Programs get installed on the main drive of the computer. Never install a program on a removable drive unless that program has been specificially designed to run on a removable drive.
Install iTunes on the computer as you normally would.
Once installed, hold SHIFT and launch iTunes.
When prompted select the option to point iTunes to an existed library.
Then point iTunes to the external drive.
Anytime you want to access the drive on a new computer, launch iTunes in the same fashion pointing it to the external drive.

Similar Messages

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

Janet.b wrote:
About 3 years old...pretty dated now I guess. Am thinking I may just need to have it upgraded by a Mac tech.
For what the Apple Store's charge you can buy almost buy a new computer.
Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
I did the drive replacement myself, got a faster drive of better quality for $300 instead.
Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
So you see what's going on here.
I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
They can offer more personalized care which you need. Clone your old drive to the new and everything.
With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

ITunes won't delete music files from default external hard drive . . . what to do?!

I really don't want to manually delete 6 GB of stuff that's not in my library but still in the music folder. Yes . . . the external hard drive is listed as the default music location. THANK YOU!

Hmm, perhaps it wasn't when you deleted the files, or there is a permissions issue. Test by adding back a known redundant file, then deleting from iTunes. Does it get deleted from the hard drive? If so, great add back the entire media folder, then delete everything added today. If not...
Right-click on your main media folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and system full control to this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7 shouldn't be too different.
Now try again...
I also have a script called KillSelectedFiles which is useful when the source files are located outside of the designated iTunes Media folder but In your case it shouldn't be necessary.
tt2

I need to do a clean install of maverick on my 2010 mbp what disk do i use and how do i move certain files from an external hard drive

I want to do a clean install of maverick on my 2010 mbp. I need to know what disk to use and also how i take certain files off my external hard drive and put on my computer. When I was having problems with my airport they did a clean install and they pulled files of my time machine.   however they forgot to put the partition back in for a windows side. Originally I had Parellels on my computer. After my external hard drive got corrupted i called apple and they fixed the problem but didn't have me set up the time machine except for the external hard drive. Now my only back up is from the external not from the laptop.    I am not sure how to do any of this. I am not computer savvy...PLEASE I NEED HELP>

First, you need to make a backup of your MBP onto your external drive. I suggest you start by cloning your MBP drive to the external drive:
Clone Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
This clone is fully bootable and also contains a clone of your Recovery HD.
Second, you need to do a clean install of OS X onto your MBP as follows:
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
This should accomplish your goals. You will have a clean install of OS X on your MBP and a bootable clone of your old system and all your files on the external drive.

I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?

I have an imac 2009 the disk drive is damaged and I have lost the passwords I need to reset passwords I tried booting with a macosx disk from an external hard drive but did not read the drive how else can I reset password ?
I have a 2012 mac book pro can I use that to connect with firewire and load osx that way? and how woudl I do that?
Thanks so much!

To what password are you referring? Do you mean your user account's admin password? Or do you mean the master password for File Vault or do you mean a Firmware Password?
For an admin password:
Forgot Your Account Password
For Snow Leopard and earlier
     Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password and
     OS X Lion- Apple ID can be used to reset your user account password.
If you cannot do the above then try this:
1. Boot to Safe Mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
2. At the prompt, type the following commands pressing return after each command line:
     /sbin/fsck -yf
     If you do not receive a "Filesystem OK" message then repeat this command until
     you do. If after seven tries you still do not receive a "Filesystem OK" message,
     then the system is corrupted and needs to be reinstalled.
     mount -uw /
     cd /private/var/db/netinfo
     mv local.nidb local.old
     rm ../.AppleSetupDone
     shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
How to reset the OS X password without a startup CD:
Reboot into Single-user Mode. Enter the following and press RETURN after each command line
   1. Type fsck -fy
   2. Type mount -uw /
   3. Type passwd <username>
I have never tried this method myself.

HT1386 I have a new computer. I have copied Itunes library from an external hard drive. Itunes now tells me I cannot sync with my Ipod as it thinks the 20gb on the computer are different to the 20gb on my Ipod touch! What have I done wrong? How can I fix

I have a new computer. I have copied Itunes library from an external hard drive. Itunes now tells me I cannot sync with my Ipod as it thinks the 20gb on the computer are different to the 20gb on my Ipod touch! What have I done wrong? How can I fix it? Alan

See:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". need help

I recently reset my computer and copy my music from an external hard drive to my itunes library. When I click on a song to play i get an error message that says " the song could not be used because the original file could not be found". But when I have my external hard drive plug in the song will play with no problem. What do I need to do to play my music without having the external harddrive plug in ???????? Please help

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

Need to move (consolidate) my iTunes files (media/library) from my external hard drive (i use time capsule as an ext hd) back to my main iMac where my iTunes is located.

I used my time capsule (1st gen) as an external hard drive to store my iTunes files and my iTunes app is on my main iMac. Now, I've decided to move those iTunes files from my external hard drive (TC) back to my iMac where my iTunes app is located. What is the best way to do this?

Is the Time Capsule the right piece of kit for the job?
Not really, no.
TC is a dumb as board hard disk in an airport extreme router. It has no media servers.. no backup.. it is slow and designed for TM target for laptops. The major one here is lack of backup. Any files you put on the TC can and will be lost at some point.. and to backup you need to have a computer connected to it with an external hard disk.. and a 3rd party backup because TM is too dumb to back up network drives.
TC is designed to spin up slow and spin down quickly at the end of backup. You will have issues when you stream media from it.
ATV needs to connect to itunes server.. not the library. You will still need a computer running. Same for lots of things.. since apple designed their system to be dependent on itunes.
The best idea is a media computer.. a mac mini is ideal. Don't need the latest greatest.. but an actual mac running itunes. Unfortunately it doesn't have large internal drives.. so it is still a bit kludgy in needing a fast external drive.. but at least you have automatic backups.

I imported my photos from an external hard drive into Lightroom, edited my photos but what next...?!

Adobe,
I imported my photos from an external hard drive into Lightroom, edited my photos and when i decided to export them the originals had not been updated and the deleted photos had not been deleted. How do i set it up so that once i import the photos, edit them and export they are then placed back in their original folder edited and updated?
I have managed to export the photos to another file but these were exported with an Adobe.xmp file. What is this and is this necessary?
Thanks for your help!

It's important to realise that LR is a DAM (Digital Asset Management) application - no images are actually imported into LR only links to where they are. Secondly, the details of any edits that you make to your images are kept only in the database and/or xmp files depending how you set this up in Preferences. In the general workflow e.g. edit in Lightroom, further edit in Photoshop and returning to LR then creating xmp files aren't really necessary. So just to emphasise - edits are stored in the LR's database, the original RAW images themselves don't change (non destructive editing). You can prove this yourself by desaturating an image (turning it into a B+W) and then look at the original images in Explorer - you'll see it's still being shown in colour.
Exporting an image is something different. By implication, you've finished with the image and perhaps want to save an image for posting on the web somewhere. Now assuming your not using any additonal and freely available LR export plug-ins, one way would be to Export a jpeg image to a folder on the desktop and this is allowed for in the Export dialogue. At this time LR reads any edits from it's database and applies those to the exported jpeg (or tiff) file it's going to send to the folder on the desktop.
As mentioned earlier, any edits and keywords etc are stored in LR's database - original RAW files remain untouched. XMP files also store the edits if LR is set up to create xmp files (in Preferences) but these are not really necessary unless you are going to be editing an already edited RAW file in another application. As an example - you import into LR's library a scanned negative. Now because strictly speaking LR isn't designed to work with negative images, you now open this file via Bridge into ACR and from here reverse the negative into a positive image. All fine and good except when you go back into LR what's shown is still a negative so what is needed is to update the metadata (LR > Metadata > Read Metadata from file) which will force LR to read the newly created metadata from the xmp file that Bridge generated. As already suggested, if you're happy editing your RAW files in LR and only LR then xmp files aren't really necessary - all the data being saved in LR's database.
Hope this has been of some help but if I might also suggest, purchasing a good book on LR from the outset thus getting to really know LR will pay dividends further on down the line.

I have been storing my Aperture and IMovie Libraries on an external hard drive that recently died. Fortunately I've been using Time Machine to back up to a 2nd external drive. How do I restore my libraries to a new external hard drive?

I have been storing my Aperture and IMovie Libraries on an external hard drive that recently died. Fortunately I've been using Time Machine to back up to a 2nd external drive. How do I restore my libraries to a new external hard drive?

This is a tricky one.
Open up Time Machine and go back to a date using the timeline on the right side of the window when you know the drive was working and was backing up as part of Time Machine backups.
Click on the name of your Mac under the Devices heading on the left side of the window in Time Machine, and if things are working correctly you will see Macintosh HD (or whatever you have named it) and the name of the external hard drive that was backing up in the past.
Right-Click on the name of the external hard drive and then click on "Restore (name of drive) to....." You may be asked for your adminstrator password at this point.
It might be easier to restore the drive contents to your desktop if you have room on your Mac, and then copy things over to the new external drive where you want to store the Aperture and iMovie Libraries.
Once the libraries have been moved over the new external hard drive, you will likely need to "point" Aperture and iMovie to the location of the libraries on the new external hard drive.

HT2674 I have an iMac purchased in May 2011. OSX Lion 10.7.3. I deleted backup file from the external hard drive. Now, the trash can will not empty some of the files deleted. File folder: "Core Services" contains a locked file: "boot.efi". It will not

I have an iMac purchased in May 2011. OSX Lion 10.7.3. I deleted backup file from the external hard drive which operates from Time Machine.
Now, the trash can will not empty some of the files deleted from the backup harddrive.
The trash contains-- File folder: "Core Services" which contains a locked file: "boot.efi".
It will not delete.
How do I get the trash can empty of these files?

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

How do I fully import my itunes music from my external hard drive to my new HP computer so that I don't need the external HD attached to listen to my music? It won't promt me to fully import songs when I import the folder from the EHD.

When I select File> Add folder to library and then press "select folder" after finding the iTunes music folder I wish to import from my external hard drive, it does not promt me whether to fully import it or not. After the importing is complete, the external hard drive must be attached in order for me to listen to my music. I do not wnat this; I wnat my music fully imported so that I don't need my EHD. What can I do? Thanks!

To import music into your iTunes library on the computer go to iTunes>Help>iTunes Help>Add items to iTunes and follow the instructions

Why has iTunes seperated a album which I have copied over from my external hard drive into iTunes? How can you pull all the songs back together into one album again?

Why has iTunes seperated a album into indevidual songs, which I have copied over from my external hard drive into iTunes? How can you pull all the songs back together into one album again?

Steve MacGuire a.k.a. turingtest2 - iTunes & iPod Hints & Tips - Grouping Tracks Into Albums - http://www.samsoft.org.uk/iTunes/grouping.asp (older post on Apple Discussions http://discussions.apple.com/message/9910895)
Quick answer: Select all the tracks on the album, File > get info, and either give them all a single "album artist", or check the "compilation" flag (as in https://discussions.apple.com/message/17670085).
If these are from multiple-CD sets you may also need to enter the appropriate information in the disc number fields. If they are not a multiple CD set you still need to make sure the disc number fields are set correctly or all empty.

I need to know the location where iTunes downloads software to, it is filling up my hard drive.

I need to know the location where iTunes downloads software to, it is filling up my hard drive.
I am trying to put my iPhone4 into recovery and then will restore it. iTunes starts extracting the software. But the iPhone reboots and by the time the software has completed extraction, the iPhone can no longer be seen by iTunes.
We have a very small hard drive on our laptop. Each time iTunes does an extraction, it uses up more space on the C: drive.
Nothing frees up that used drive space. Not closing iTunes or rebooting the computer. Nothing.
How do we release / delete these files?

See Re: when itunes downloads ipsw where does it go.
tt2

I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac.

I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac. My Macbook Pro and the two different iMacs I tried it on were all using Mountain Lion, so the only difference was the iMac versus Macbook Pro.

I just tried this, no luck...
I connected a different USB cable, still the same problem. Tried both cables with the problematic hard drive on two different computers, still the same problem.
At this point I assume I'll probably need professional help in saving the files, thanks for the assistance.

What do I need to do to have my iTunes run on any operating system from my external hard drive?

Similar Messages

Maybe you are looking for