What do I need to do to replace my 80 gig HDD with a larger capacity HDD?

I have an older Mac mini, running OSX 10.6.8 @ 1.83 GHz w/2 GB ram. It is used primarily for email, iPhone photo storage, and online banking. Works, but now I am out of memory. rather than buy a new unit, I'd prefer to replact the 80 GB HDD with a larger capacity drive. What do you recommend?

No such thing as a "PC hard drive". Im sure it comes formatted in MSDOS or otherwise, ...doesnt mean anything.
Ive got a 100 drives laying around here, most came formatted in DOS or Exfat or NTFS , just formatted all of them for Mac.
format the HD as Mac OSX extended journaled ,....takes 5 seconds.
CLONING:
1. grab carbon copy cloner or superDuper CLONE app.
2 attach target clone drive via USB in an enclosure or HD dock. Firstly format the target (external new) HD or SSD in disk utility in “Mac OS extended journaled”
3. clone internal HD to target HD or SSD (external) [takes about 40 mins depending on size]
4. Boot ONCE from external (go to sys. preference to boot from external) to TEST the new Clone
5. open bottom (see videos on ifixit or youtube on same) and remove old, install new.
(this video is for a 2012, look at this site for YOUR specific year / model)
http://www.ifixit.com/Guide/Replacing+MacBook+Pro+13-Inch+Unibody+Mid+2012+Hard+ Drive/10378/1
Done
(FIRST TIME after installing, boot will be SLOW,...normal and ignore that).
Clone APPS
Superduper does not clone the recovery partition, but that is NOT necessary if you keep the original HD as a “backup clone”. Most don’t bother with the recovery partition in a clone, however that is your prerogative.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
(Free superduper APP above)
CCC App
http://www.bombich.com/
You said-------
tjcinco
My 80 gb drive has about 1 gb available,
Sounds like an old drive there....... nice Hitachi or Toshiba 1TB external drive is average $70
Time for a new (additional) archive HD for data protection.

Similar Messages

HT1386 Switching from a pc to a Mac. What steps are needed to get my iPhone and iPad to work with my new Mac?

What steps are needed when upgrading from a pc to a Mac?

Copy everything from your old computer to your new one.

Re: Toshiba M10: replacing 7k200 HDD with Advanced Format" 7K750 HDD

Can anyone see any problems with replacing the original Hitachi TravelStar 7K200 (200GB) hard drive, which came in my two-year-old Toshiba Tecra M10-11X, with a so-called "Advanced Format" 7K750 (750GB or perhaps 640GB) hard drive?
Like the original I would like to dual-boot the new drive using three partitions:
* Windows 7 32-bit
* Data
* Windows XP
and would probably clone one disk to the other (increasing the partition sizes!) using v5 of Macrium Reflect.
I've read up on the TravelStar 7K750 specs, the Hitachi Alignment Tool, the Microsoft KnowledgeBase article 982018 "An update that improves the compatibility of Windows 7 and Windows Server 2008 R2 with Advanced Format Disks is available", Bit-tech's http://www.bit-tech.net/hardware/sto...t-hard-disks/1, and so on, but wonder whether anyone has actually replaced the original hard drive with any Advanced Format disk, and so might have some experience to share?
Thanks!

Hi
I dont have an experience using such Advanced Format" 7K750 HDD but in my opinion it should not be a big problem using such HDD.
The notebook supports SATA interface and if this HDD would also support the SATA controller, then the HDD should be recognized too
But of course this is my personal opinion...

What do I need to do to replace the screen on my IPad2?

How much does it cost to replace the screen on my Ipad2?

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Apple will provide a replacement iPad for:
iPad model
Out-of-Warranty Service Fee
New iPad
$299
iPad 2, iPad
$249
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You can get the glass replaced at 3rd party repair sources for less $, however, the Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
 Cheers, Tom

What do I need to make 32bit games play on x86-64 with intel gm965?

I have been trying to get a bunch of 32bit games to play on x86-64 with no luck.
Ive tried quake4, prey, and now doom3 and all seem to have the same issues. They start to work and the screen goes black, then it just goes right back to the desktop.
I have installed the entire lib32 group, and still no luck. I even tried install lib32-intel-dri from aur but still no luck.
Do I still use lib32-nvidia-utils with an intel chipset, because thats what gets installed by default when i install the lib32 group?
Here is the output from doom3 (quake4, and prey had a very similar output where they all said idRenderSystem::Shutdown() but I already removed the packages out of frustration so I dont have the outputs from them, Im pretty sure its probably the same exact problem with all of them though)
[tj@arch ~]$ doom3
DOOM 1.3.1.1304 linux-x86 Jan 16 2007 21:58:02
found interface lo - loopback
found interface wlan0 - 192.168.1.50/255.255.255.0
------ Initializing File System ------
Loaded pk4 /opt/doom3/base/game01.pk4 with checksum 0x51c6981f
Loaded pk4 /opt/doom3/base/game02.pk4 with checksum 0xf3ec6f7
Loaded pk4 /opt/doom3/base/game03.pk4 with checksum 0x5d4230ea
Loaded pk4 /opt/doom3/base/pak000.pk4 with checksum 0x28d208f1
Loaded pk4 /opt/doom3/base/pak001.pk4 with checksum 0x40244be0
Loaded pk4 /opt/doom3/base/pak002.pk4 with checksum 0xc51ecdcd
Loaded pk4 /opt/doom3/base/pak003.pk4 with checksum 0xcd79d028
Loaded pk4 /opt/doom3/base/pak004.pk4 with checksum 0x765e4f8b
Loaded pk4 /opt/doom3/base/pak005.pk4 with checksum 0x8ffc3621
Loaded pk4 /opt/doom3/base/pak006.pk4 with checksum 0x95b65ab
Loaded pk4 /opt/doom3/base/pak007.pk4 with checksum 0x666bdb3c
Loaded pk4 /opt/doom3/base/pak008.pk4 with checksum 0x23ae5993
Current search path:
/home/tj/.doom3/base
/opt/doom3/base
/opt/doom3/base/pak008.pk4 (3 files)
/opt/doom3/base/pak007.pk4 (38 files)
/opt/doom3/base/pak006.pk4 (48 files)
/opt/doom3/base/pak005.pk4 (63 files)
/opt/doom3/base/pak004.pk4 (5137 files)
/opt/doom3/base/pak003.pk4 (4676 files)
/opt/doom3/base/pak002.pk4 (6120 files)
/opt/doom3/base/pak001.pk4 (8972 files)
/opt/doom3/base/pak000.pk4 (2698 files)
/opt/doom3/base/game03.pk4 (2 files)
/opt/doom3/base/game02.pk4 (2 files)
/opt/doom3/base/game01.pk4 (2 files)
game DLL: 0x0 in pak: 0x0
Addon pk4s:
file system initialized.
----- Initializing Decls -----
------- Initializing renderSystem --------
using ARB renderSystem
renderSystem initialized.
5206 strings read from strings/english.lang
----- Initializing Sound System ------
sound system initialized.
----- R_InitOpenGL -----
Setup X display connection
dlopen(libGL.so.1)
Initializing OpenGL display
Using XFree86-VidModeExtension Version 2.2
DGA DirectVideo Mouse (Version 2.0) initialized
Free86-VidModeExtension Activated at 640x480
Using 8/8/8 Color bits, 8 Alpha bits, 24 depth, 8 stencil display.
GL_RENDERER: Mesa DRI Intel(R) 965GM GEM 20090712 2009Q2 RC3
GL_EXTENSIONS: GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_shadow GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat GL_ARB_texture_non_power_of_two GL_ARB_vertex_program GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_draw_range_elements GL_EXT_framebuffer_object GL_EXT_fog_coord GL_EXT_multi_draw_arrays GL_EXT_packed_pixels GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_texture3D GL_EXT_texture_edge_clamp GL_EXT_texture_env_add GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_lod_bias GL_EXT_texture_object GL_EXT_vertex_array GL_IBM_texture_mirrored_repeat GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texture_env_combine4 GL_NV_texture_rectangle GL_NV_texgen_reflection GL_NV_vertex_program1_1 GL_SGIS_generate_mipmap GL_SGIS_texture_lod
------- Input Initialization -------
XKB extension: compile time 0x1:0x0, runtime 0x1:0x0: OK
XKB extension present on server ( 0x1:0x0 )
dlopen(libasound.so.2)
asoundlib version: 1.0.21a
Alsa is available
------ Alsa Sound Initialization -----
opened Alsa PCM device default for playback
device buffer size: 5644 frames ( 22576 bytes )
allocated a mix buffer of 16384 bytes
...using GL_ARB_multitexture
...using GL_ARB_texture_env_combine
...using GL_ARB_texture_cube_map
...using GL_ARB_texture_env_dot3
...using GL_ARB_texture_env_add
...using GL_ARB_texture_non_power_of_two
...using GL_ARB_texture_compression
X..GL_EXT_texture_compression_s3tc not found
...using GL_EXT_texture_filter_anisotropic
maxTextureAnisotropy: 16.000000
...using GL_EXT_texture_lod
...using GL_1.4_texture_lod_bias
X..GL_EXT_shared_texture_palette not found
...using GL_EXT_texture3D
...using GL_EXT_stencil_wrap
X..GL_NV_register_combiners not found
X..GL_EXT_stencil_two_side not found
X..GL_ATI_separate_stencil not found
X..GL_ATI_fragment_shader not found
X..GL_ATI_text_fragment_shader not found
X..GL_ARB_vertex_buffer_object not found
...using GL_ARB_vertex_program
...using GL_ARB_fragment_program
X..EXT_depth_bounds_test not found
---------- R_NV20_Init ----------
Not available.
----------- R200_Init -----------
Not available.
---------- R_ARB2_Init ----------
Available.
----- R_ReloadARBPrograms -----
glprogs/test.vfp
glprogs/test.vfp
glprogs/interaction.vfp
glprogs/interaction.vfp
glprogs/bumpyEnvironment.vfp
glprogs/bumpyEnvironment.vfp
glprogs/ambientLight.vfp
glprogs/ambientLight.vfp
glprogs/shadow.vp
glprogs/R200_interaction.vp
glprogs/nv20_bumpAndLight.vp
glprogs/nv20_diffuseColor.vp
glprogs/nv20_specularColor.vp
glprogs/nv20_diffuseAndSpecularColor.vp
glprogs/environment.vfp
glprogs/environment.vfp
glprogs/arbVP_glasswarp.txt: File not found
glprogs/arbFP_glasswarp.txt: File not found
WARNING: vertex array range in virtual memory (SLOW)
signal caught: Segmentation fault
si_code 1
Trying to exit gracefully..
Shutting down sound hardware
----------- Alsa Shutdown ------------
close pcm
dlclose
idRenderSystem::Shutdown()
double fault Segmentation fault, bailing out
*** glibc detected *** ./doom.x86: double free or corruption (!prev): 0x0c3a5560 ***
======= Backtrace: =========
/opt/lib32/lib/libc.so.6[0xf73ea5e1]
/opt/lib32/lib/libc.so.6[0xf73ebce2]
/opt/lib32/lib/libc.so.6(cfree+0x6d)[0xf73eedad]
/opt/lib32/usr/lib/libGLcore.so.1[0xf4c96c97]
/opt/lib32/lib/libc.so.6[0xf73ac36f]
/opt/lib32/lib/libc.so.6[0xf73ac3df]
./doom.x86[0x829e225]
/lib/ld-linux.so.2[0xf7759517]
/opt/lib32/lib/libdl.so.2[0xf7727c84]
/lib/ld-linux.so.2[0xf7753a96]
/opt/lib32/lib/libdl.so.2[0xf772807c]
/opt/lib32/lib/libdl.so.2(dlclose+0x2a)[0xf7727cba]
./doom.x86[0x835e008]
======= Memory map: ========
08048000-0842e000 r-xp 00000000 08:03 391681 /opt/doom3/doom.x86
0842e000-08448000 rwxp 003e6000 08:03 391681 /opt/doom3/doom.x86
08448000-0a613000 rwxp 00000000 00:00 0
0be99000-0c4e0000 rwxp 00000000 00:00 0 [heap]
f46b7000-f48b8000 rwxp 00000000 00:00 0
f48b8000-f497b000 r-xp 00000000 08:03 269600 /opt/lib32/usr/lib/libasound.so.2.0.0
f497b000-f497f000 rwxp 000c3000 08:03 269600 /opt/lib32/usr/lib/libasound.so.2.0.0
f497f000-f5999000 r-xp 00000000 08:03 270117 /opt/lib32/usr/lib/libGLcore.so.190.42
f5999000-f59df000 rwxp 01019000 08:03 270117 /opt/lib32/usr/lib/libGLcore.so.190.42
f59df000-f59ed000 rwxp 00000000 00:00 0
f59ed000-f5a84000 r-xp 00000000 08:03 270127 /opt/lib32/usr/lib/libGL.so.190.42
f5a84000-f5a9d000 rwxp 00097000 08:03 270127 /opt/lib32/usr/lib/libGL.so.190.42
f5a9d000-f5aac000 rwxp 00000000 00:00 0
f6600000-f6621000 rwxp 00000000 00:00 0
f6621000-f6700000 ---p 00000000 00:00 0
f67d7000-f67e1000 r-xp 00000000 08:03 269298 /opt/lib32/lib/libnss_files-2.10.1.so
f67e1000-f67e2000 r-xp 00009000 08:03 269298 /opt/lib32/lib/libnss_files-2.10.1.so
f67e2000-f67e3000 rwxp 0000a000 08:03 269298 /opt/lib32/lib/libnss_files-2.10.1.so
f682c000-f6833000 r-xp 00000000 08:03 269301 /opt/lib32/lib/librt-2.10.1.so
f6833000-f6834000 r-xp 00006000 08:03 269301 /opt/lib32/lib/librt-2.10.1.so
f6834000-f6835000 rwxp 00007000 08:03 269301 /opt/lib32/lib/librt-2.10.1.so
f6835000-f6839000 r-xp 00000000 08:03 269915 /opt/lib32/usr/lib/libXfixes.so.3.1.0
f6839000-f683a000 rwxp 00003000 08:03 269915 /opt/lib32/usr/lib/libXfixes.so.3.1.0
f683a000-f6842000 r-xp 00000000 08:03 269710 /opt/lib32/usr/lib/libXrender.so.1.3.0
f6842000-f6843000 rwxp 00007000 08:03 269710 /opt/lib32/usr/lib/libXrender.so.1.3.0
f6843000-f684b000 r-xp 00000000 08:03 269917 /opt/lib32/usr/lib/libXcursor.so.1.0.2
f684b000-f684c000 rwxp 00007000 08:03 269917 /opt/lib32/usr/lib/libXcursor.so.1.0.2
f684c000-f684d000 rwxp 00000000 00:00 0
f684d000-f684f000 rwxp 00000000 00:0c 1497 /dev/zero
f684f000-f6850000 r-xp 00000000 08:03 270124 /opt/lib32/usr/lib/libnvidia-tls.so.190.42
f6850000-f6851000 rwxp 00000000 08:03 270124 /opt/lib32/usr/lib/libnvidia-tls.so.190.42
f6851000-f6852000 ---p 00000000 00:00 0
f6852000-f7056000 rwxp 00000000 00:00 0
f7097000-f70cb000 rwxp 00000000 00:00 0
f710c000-f713b000 rwxp 00000000 00:00 0
f71bd000-f71fa000 rwxp 00000000 00:00 0
f72bd000-f731b000 rwxp 00000000 00:00 0
f735c000-f735d000 rwxp 00000000 00:00 0
f735d000-f7361000 r-xp 00000000 08:03 269698 /opt/lib32/usr/lib/libXdmcp.so.6.0.0f7361000-f7362000 rwxp 00003000 08:03 269698 /opt/lib32/usr/lib/libXdmcp.so.6.0.0
f7362000-f7363000 rwxp 00000000 00:00 0
f7363000-f7365000 r-xp 00000000 08:03 269696 /opt/lib32/usr/lib/libXau.so.6.0.0
f7365000-f7366000 rwxp 00001000 08:03 269696 /opt/lib32/usr/lib/libXau.so.6.0.0
f7366000-f737e000 r-xp 00000000 08:03 269664 /opt/lib32/usr/lib/libxcb.so.1.1.0
f737e000-f737f000 rwxp 00017000 08:03 269664 /opt/lib32/usr/lib/libxcb.so.1.1.0
f737f000-f74bf000 r-xp 00000000 08:03 269303 /opt/lib32/lib/libc-2.10.1.so
f74bf000-f74c1000 r-xp 00140000 08:03 269303 /opt/lib32/lib/libc-2.10.1.so
f74c1000-f74c2000 rwxp 00142000 08:03 269303 /opt/lib32/lib/libc-2.10.1.so
f74c2000-f74c5000 rwxp 00000000 00:00 0
f74c5000-f74e2000 r-xp 00000000 08:03 269791 /opt/lib32/usr/lib/libgcc_s.so.1
f74e2000-f74e3000 rwxp 0001c000 08:03 269791 /opt/lib32/usr/lib/libgcc_s.so.1
f74e3000-f7507000 r-xp 00000000 08:03 269299 /opt/lib32/lib/libm-2.10.1.so
f7507000-f7508000 r-xp 00023000 08:03 269299 /opt/lib32/lib/libm-2.10.1.so
f7508000-f7509000 rwxp 00024000 08:03 269299 /opt/lib32/lib/libm-2.10.1.so
f7509000-f750a000 rwxp 00000000 00:00 0
f750a000-f75f2000 r-xp 00000000 08:03 269783 /opt/lib32/usr/lib/libstdc++.so.6.0.13
f75f2000-f75f3000 ---p 000e8000 08:03 269783 /opt/lib32/usr/lib/libstdc++.so.6.0.13
f75f3000-f75f7000 r-xp 000e8000 08:03 269783 /opt/lib32/usr/lib/libstdc++.so.6.0.13
f75f7000-f75f8000 rwxp 000ec000 08:03 269783 /opt/lib32/usr/lib/libstdc++.so.6.0.13
f75f8000-f75ff000 rwxp 00000000 00:00 0
f75ff000-f760c000 r-xp 00000000 08:03 269921 /opt/lib32/usr/lib/libXext.so.6.4.0
f760c000-f760d000 rwxp 0000d000 08:03 269921 /opt/lib32/usr/lib/libXext.so.6.4.0
f760d000-f7723000 r-xp 00000000 08:03 269704 /opt/lib32/usr/lib/libX11.so.6.3.0
f7723000-f7727000 rwxp 00115000 08:03 269704 /opt/lib32/usr/lib/libX11.so.6.3.0
f7727000-f7729000 r-xp 00000000 08:03 269311 /opt/lib32/lib/libdl-2.10.1.so
f7729000-f772a000 r-xp 00001000 08:03 269311 /opt/lib32/lib/libdl-2.10.1.so
f772a000-f772b000 rwxp 00002000 08:03 269311 /opt/lib32/lib/libdl-2.10.1.so
f772b000-f773f000 r-xp 00000000 08:03 269308 /opt/lib32/lib/libpthread-2.10.1.so
f773f000-f7740000 ---p 00014000 08:03 269308 /opt/lib32/lib/libpthread-2.10.1.so
f7740000-f7741000 r-xp 00014000 08:03 269308 /opt/lib32/lib/libpthread-2.10.1.so
f7741000-f7742000 rwxp 00015000 08:03 269308 /opt/lib32/lib/libpthread-2.10.1.so
f7742000-f7745000 rwxp 00000000 00:00 0 /usr/bin/doom3: line 5: 10177 Aborted linux32 ./doom.x86 $*
[tj@arch ~]$
Last edited by tjwoosta (2009-11-12 21:19:35)

Dump lib32, get a 32-bit chroot, and run with schroot -p "your game"
Within your chroot you'd need to have the intel drivers installed in a version exactly matching your main system's. It takes a bit more HD space (less than 1 GB), but you get a much easier system since you're using the packages maintained in the repos by devs/TUs instead of lib32 packages maintained (primarily) by volunteers for their own specific system.

What cables are needed to extend the range of my airport extreme with my time capsule

I just purchased a new Time Capsule, and I want to install it and use my current Airport Extreme to extend our home's wireless network. What extra cables are needed, and is there a diagram for this setup? We currently have a broadband network.

Apple's instructions to do this are here:
http://support.apple.com/kb/HT4260
You will need an Ethernet cable to connect your new Time Capsule to the AirPort Extreme.

What do I need to do to run my UK-bought iMac with an American power supply

We are moving to Bermuda (which uses American power supply), and I would like to know how I can safely use my UK-bought iMac out there. Any advice much appreciated!

You don't say which iMac, but here's a link to the whole list:
http://support.apple.com/kb/HT1981
Bermuda is one of my favorite places on Earth - been visiting there since I was a very young kid.
-dan

Replacing old TC with new larger capacity TC and using old TC as an external HDD

I currently have a 500GB 1st gen TC. I am running out of space for back ups and running out of room on my iMAC HDD. I would like to purchase a nw 2TB TC to back up both my iMAC, macbook, and expected Macair when the new ones are released.
Questions:
1. Can I use the old TC as an external HDD only? I would like to place my iTunes Library and photos on it so it is visilble accross the network via wi-fi.
3. If I move my libraries is there a method to make them available to me when I travel via the internet? Or is this the upcoming cloud sharing I've heard so much about?
2. My understanding from vaious discussions is that I can not connect the old TC (via the TC USB port) directly to the the new TC and have the old one continuously backed up to the new one (iMAC---new TC usb---old TC). In other words, if I were to move my itunes and photo media to the 500GB old TC then they would not be backed up. However, what if I conencted the old TC directly to the iMAC?
old TC----iMAC---new TC
Would it back-up to the new TC now? Can I connect it to the iMAC ethernet port or would i have to use the USB connection?
3. Can I daisy chain them together in a way that the new TC will backup both the iMAC and the old TC?
iMAC---old TC----new TC

golf and fly wrote:
I currently have a 500GB 1st gen TC. I am running out of space for back ups and running out of room on my iMAC HDD. I would like to purchase a nw 2TB TC to back up both my iMAC, macbook, and expected Macair when the new ones are released.
You can connect a USB drive to the TC, and back up some or all of your Macs to it instead of the TC's internal HD. See #Q2 in Using Time Machine with a Time Capsule.
And you can put other data there, too, such as your iTunes library, but for best results you'll want to partition the disk. Otherwise, Time Machine will, eventually, use up all the empty space.
Also note that Time Machine cannot back up from any network drive, so you'll need to find an alternative way to back up that "other" data. The Chronosync app might be viable.

Can I replace the curent hard drive with a larger one in my early 08 Book

OK - we have had this machine for alittle over a year. I bought it as a refurb from Mac (my personal favorite way to buy anything Mac) and we are running out of space. I have all of our pics on an external HD but still have the music on the main HD of the MacBook.
I know that the options of putting my iTunes library on the external is always there, but I HATE HATE HATE having things not on my machine. Things never seem to work just right when they are accessed remotely. Maybe I am not doing something right with the networking, but there seems to always be a delay. With the music, we have Airport connecting 2 remote sets of speakers and the AppleTV and there seems to be a delay even empty spots in the music when I am playing it remotely.
SO - what options do I have on the internal HD of my MacBook or can you make suggestions on the remote synching of the external HD and libraries, etc.
Many thanks for your help!
David

If you want to upgrade the HDD to 320GB/500GB and then upgrade the RAM to 4GB:
RAM you want to buy:
[G.Skill 2X2GB PC2-5300 RAM|http://www.newegg.com/Product/Product.aspx?Item=N82E16820231135] for $34.99, no tax, and free shipping.
As for HDD I'll give you some options between [320GB, 400GB, or 500GB along with 5400RPM or 7200RPM|http://www.newegg.com/Product/ProductList.aspx?Submit=Property&Subcateg ory=380&Description=&Type=&N=2010150380&srchInDesc=&MinPrice=&MaxPrice=&Property CodeValue=359%3A15133&PropertyCodeValue=3097%3A33643&PropertyCodeValue=3097%3A40 008&PropertyCodeValue=3097%3A40009&PropertyCodeValue=355%3A7777&PropertyCodeValu e=355%3A7776]:
I'd recommend the Hitachi 5k320 $59.99 after $10 rebate, 7k320 $59.98 after $20 rebate, or one of the 5400 RPM 500GB HDDs for $94.99 or $99.99.
You can also get a bit of cash back plus $5 through this [link|http://www.ebates.com/rf.do?referrerid=DMMneqKtzskNampKdYmMZA%3D%3D]

I want to replace my start up drive with a larger drive, how can I do it?

My start up drive is only 300 GB I would like to replace it with 1tb. How do I do this? I also want up grade to snow leopard which I own.

Try this.
Regards.

Replacing PS4 HDD with an old 1TB HDD

Hello Everyone, I have recently bought a PS4 which will be delivered within 1-2 days. I really wanted a larger Hard drive as I think 500 GB won't be enough for me so I decided that I will upgrade my HDD to 1 TB before using my PS4. I have a 1 year old external Hard drive samsung m8 1TB which I wanted to use in my PS4. the problem is that the hard drive has corrupted twice in past. I used to watch 1080P MKV movies on my Samsung LED TV but it started getting corrupted and unreadable and only way to use it again was to format it and yes I did it twice only. I was using my old PS3 controller usb cable for my hard drive to connect it with my computer or LED TV. My concern is, would I be able to use it on my PS4 without any issue? As it might be the USB cable which would be causing my external hard drive to be corrupted or my LED TV or due to the data which I was containing in my Hard disc. Even If it may corrupt in future, will it damage or affect my PS4 negatively because if it will not harm my PS4 than i will give it a try so I can put back the original PS4 500 GB HDD if my hard disk corrupts again. Thanks!

TheStill wrote:
I wouldn't risk it if the hdd has had problems in the past it will have problems again. Do you want to install hundreds of gigs of data only to discover 3 or 4 months down the line the hdd has gone corrupt again.
1tb hdd are cheap nowadays may as well buy a new one and give yourself peace of mind that you won't have problems a few months down the line.
It wouldn't damage ps4 just cause a bit of inconvenience as you would have to format the drive again. Then spend hours downloading and installing everything again. different subject, how do you have a a sign with your id under your comment how do i get it?

What is the need of creating New order type in PO

Dear Experts,
I have a doubt in MM, what is the need of creating New Order Types? Please explain with Business scenario. Thanking you,
Regards,
Elangovan.A

Hi Elangovan
Whenever you have a doubt like this...
--- just verify the config settings for your parameter (order type here).
---Also check whether authorizations can be given for this ?
---Do you need it for specific analysis ? Are there standard reports/listings available ?
So, some of the uses of order type are:
1) What are the parameters controlled by order type ?
It controls the number ranges and screen layouts etc. So, if you want to have different set of number ranges and different screen settings, then you may need a new order type.
2) Authorizations can be controlled with order type.
3) You can also use it in analysis/listings
Best regards
Ramki

Zfd4.01 remote control via desktop4.exe. What rights are needed?(repost, seems to have been stuck in wrong thread)

Hi.
Trying to give some non-admin users the right to remote control workstations via the user object. I have followed the tids/documentation for
this when using ConsoleOne and that works just fine.
When trying to remote control a user object with desktop4.exe (dopps zenwsbrowser actually) there seems to be some rights missing. Making the
user into an admin solves the problem and until the remote controlled user changes IP on his workstation it keeps on working even when removing
admin rights.
So the question is simply put:
What rights is needed on user AND workstation objects to remote control with desktop4.exe? Or if someone knows how I can check what attributes
has changed on a user after a remote control has been performed that would be sweet too.
/anders westerberg

Anders,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Picking up a Canon 60d, what do I need to know?

I've been using a Canon XH-A1 HDV camcorder and am making the switch over to a Canon DSLR for video (Canon 60D). I know from reading that the video files the 60D records is not 100% compatible with Final Cut Express, so what do I need to know about using the files in projects with FCE? Do I need to convert them with a separate application on my mac or can I just import the files into FCE and convert them in there before I edit?
Any input about using a DSLR for video (60d or 7d) would be a great help!
Thanks in advance!

http://discussions.apple.com/thread.jspa?threadID=2650840
See the above link.

I cannot seem to sync via bluetooth with any other phone. it says not capable. what do i need to do?, i cannot seem to sync via bluetooth with any other phone. it says not capable. what do i need to do?

i tried to sync my iphone with my old phone to transfer all the contacts over via bluetooth but it said that the phone is not sopported. what do i need to do? will i have this problems with alot of phones? is there another way i can transfer over the contacts. thank you.

The iPhone does NOT support Bluetooth synch to other phones. You need to export your phone contacts to a computer to a program such as Address Book or Outlook and then synch those contacts to your iPhone using iTunes.

What do I need to do to replace my 80 gig HDD with a larger capacity HDD?

Similar Messages

Maybe you are looking for