What do I need to set in order for each instance of the step type in the sequence to act individually?

I'm not able to change parameters on one step without it changing the parameters on another instance of the step within the same sequence. Is there something in the step type properties that I need to set to change this?
For instance, I have created a custom step called "Battery PWR" that the user can insert into a sequence, hit the "edit" button, set a control in a GUI to 12V and hit an "Okay" button so that the post-step condition causes the power supply voltage to change. Then, later in the sequence I want the user to be able to insert the same custom step, hit the edit button, set the control to 0V and hit an "Okay" button so that the post-step conditition causes the power supply to go to 0V. The problem is, when the user edits one of the steps, it causes the other step to change to the same value.
I know that this has a simple fix, just can't seem to find it.

I answered my own question. I was reading and writing to a file global instead of the step parameters, so I was basically overwriting my variables each time I edited the step. I'm obviously a novice TestStand user.

Similar Messages

What do I need to buy in order for my iPod Classic 160GB to connect with my blue tooth speaker

What do I need to buy in order for my IPod Classic 160 GB to connect with my blue tooth Ultimate Ears Boom speaker?

Upgrading RAM and your HD will give you some performance gains, but depending on what you are doing, it may not be enough. Your best friend will always be processor speed. This has a direct relation to how many cores and the speed of the RAM.
However, if you are unable to spring for a new computer, then the options of running more RAM and a biggger, faster HD should ruduce some bottle necks.
Here is a site where you can check out what your computer can handle http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade They have some charts comparing speed gains with various components.
Are you using the track freeze option to manage the track count and subsequent demands on your machine?

HT1688 My iphone 5 will not turn on at all. What do I need to do in order for it to turn on?

My iphone 5 will not come on. What do I need to do in order to get my phone turned on?

See Here for
Frozen or unresponsive iPhone
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
More Info here...
https://discussions.apple.com/message/19521062

What property settings to I need to set in order for VISA Serial Read to read ASCII exactly like the legacy serial read vi?

I have successfully built a vi which communicates with a piece of equipment via the serial port using ASCII characters. I am trying to replace the older versions of Serial Read and Write VIs with the VISA Serial Read and Write VIs. The VISA Write works fine, but the when reading data coming from the "box", the VISA Read VI returns string data with foreign looking characters instead of the usual correct ASCII characters as shown by a dumb terminal which is in parallel with the serial data line. Is there a special property node which needs to be configured on the VISA Serial Read vi, or do I need to set something on the VISA Configure Serial port v
i?
Why aren't the VISA serial vis compatible with the older serial vis?
Thanks...

Usually, garbage characters are an indication of a baud rate or parity mismatch, or maybe a stop bit or number of data bits setting. Make sure that you have configured your port correctly with VISA Configure Serial Port. I have used VISA serial successfully many times.
- tbob
Inventor of the WORM Global

When I advertise a link for potential customers, the link does not light up so that the customer can just click on link and be direct to my website. Why? What do i need to do in order for links to light up?

When advertising, I put my link in so that potential customers can just click on link and be automatically directed to my website. My links are not lighting up so that they can be directed to my website. Why?

Do you mean sending email?
Just above the textarea that you use to enter the message text on the "Compose New Mail page" there is usually a button bar with buttons to add text formatting like Bold and Italic.<br />
That toolbar may also have a button to turn a text link into a clickable hyperlink (look for a chain like button).<br />
You can select the text and click that button to turn the link into a clickable hyperlink.<br />
If you can't find the button then hover them all to check the tooltip of each (e.g. Insert hyperlink).
* Make Link - https://addons.mozilla.org/firefox/addon/make-link/

I have purchased 100 iPads for my school. We need to set them up for classrooms. I am not sure of the protocol. flrobinson

I have purchaed 100 iPads for my students. I need to know how to set them all up for muitiple users with apps.

Hi fkr2.0,
Welcome to the world of iPad deployments! There are a few things I recommend you do before you get started:
First I would watch the iOS Deployment Model Videos on the left side of this page:
http://www.apple.com/education/resources/information-technology.html
Then I recommend you read through these two guides:
iOS 6 Education Deployment Guide
http://images.apple.com/education/docs/ios_6_education_deployment_guide.pdf
Apple Configurator Help Guide
http://help.apple.com/configurator/mac/1.0/
This will give you a solid foundation for managing iPads with Apple Configurator. Once you read through these guides you will likely have more specific questions that you can post to these forums.
Hope this answers your question!! Good luck with your iPad deployment.
~Joe

I need to be able to right click on a saved document and have the option to convert to Adobe PDF. I have the Abobe Acrobat Xl Pro and used to have this option until I had to create a new subscription. What do I need to do in order to have this option?

I need to be able to right click on a saved document and have the option to convert to Adobe PDF. I have the Abobe Acrobat Xl Pro and used to have this option until I had to create a new subscription. What do I need to do in order to have this option? I use windows 7

If you are New to Mac... you may also find these links of Value
Mac 101
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/ Switching from PC
MBP Support
http://www.apple.com/support/macbookpro
Cheers,

I want to use my Mac desktop as a portal for viewing my cable television via some kind of cord. Is this possible and what do I need to set this up?

I want to use my Mac desktop as a portal for viewing my cable television via some kind of cord. Is this possible and what do I need to set this up?

It can be done with analog but not digital thanks to "good 'ol" HDCP copy protection which apple (and most other manufacturers) unfortunately respect.
So you can take the analog output from your cable box (component -- 5 cables -- if it has it but generally they all have composite -- 3 cables) and feed it into some kind of converter or into some appropriate pci card for your mac pro. But none of them are going to let you directly use the HDMI output from the box to your computer.
Bottom line, no single cord is going to work and it will never be the higher quality digital picture you get on your tv.
Some qualification: There are boxes that I think support hdmi input. Look at Blackmagic. But I still don't think you can get around the HDCP from the cable box (might depend on the kind of cable box).

I have made a bootable copy of ML and want to load it on another laptop running SL. What do I need to do in order to avoid losing any files. I do not want to do a clean install.

I have made a bootable copy (8GB thumb drive) of ML and want to load it on another Apple laptop running SL. What do I need to do in order to avoid losing any files. I do not want to do a clean install. I know ML is comptible.

I'm getting an error message when ML is almost completely installed and it stops the install. Is there any way to get back to the snow leopard operating system and scrap the ML install at this point. I had to shut the Mac book off and when I started again it tried to install ML a second time. It is still trying to install but at this point I don't want to screw anything up any further so just want to get back to SL.
Any suggestions.

My computer will not open after in after I log in. What do i need to do in order to get back to my home screen?

My computer will not open after in after I log in. What do i need to do in order to get back to my home screen?

Hello kdeutsch86,
The article linked below details some useful troubleshooting steps that can also help resolve login issues.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
Cheers,
Allen

What are the step to Cancel the iStore order hold

Hi All,
What are the steps to cancel the Order hold option in iStore, and OM all the orders for all user getting hold, Please tell me what are the steps to Cancel this hold option.
Thanks
Vivek

like below i set the profile options
ASO: Credit Card Authorization = No
ASO: Default Order State profile = Booked
IBE: Perform Payment authorization = Yes
and i removed the OM>> Customer >> standard >> credit Check option then also i am getting the same hold issue.
Your order is on "Hold" with Order Number 17968
Please print this page and keep it for your records. If you are faxing your credit card number or purchase order, remember to complete the Faxed Order section below before faxing.
Thanks
Vivek

I have a new computer from my father that already has his iphone content on it. what do i need to do to switch my phone over from my old computer to the new one and have the new computer sync MY contacts and content to the new computer without erasing

i have a new computer from my father that already has his iphone content on it. what do i need to do to switch my phone over from my old computer to the new one and have the new computer sync MY contacts and content to the new computer without erasing my contact lists and purchased apps?

okay from reading posts it seems if I transfer my backed up info from my old comp to the new one and erase my dad's phone's back up i could reset my phone and it would transfer all my old data back onto the phone, be linked to the new computer and i could proceed. Where do i find the backed up info from my phone?

My location service is not working from the day one the response is that (cannot able to determine the location) .What can i need to do to see my location in maps and other application even the location services is enabled in the settings?

From the day one the response is that (cannot able to determine the location) while using ios5.1 .What can i need to do to see my location in maps and other application even the location services is enabled in the settings?.Which means that is there is any problem in my ipad ? currently running on IOS 6.

Your location is determined from a location database which contains the MAC addresses of routers and their physical location. A MAC address is a unique number which is built-in to all network devices when manufactured. The database is built and updated by actually driving around and mapping router locations.
Since you just moved the location of your router has not been updated in the database and when you use Maps you will see your old location.
If you go outside your house you can be correctly located because your iPod sees other routers which are in the location database. Note that you do not need to be connected to a router for your iPod to see it and obtain its MAC address.

Need to set default values for the fields plant and location in ME21N

Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advance

hi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam

Set height size for each state enabling browser scrollbar if needed..

I'm working on a flex project, completely new to it. I'm trying to resize my application based on the set height size for each state. I'd like the wrapper to resize in the browser so that the browser's scroll bar appears if needed. hope this makes sense....
My enitial opening page I've set the height to 1000. now when I click on a link to another state from this page, we'll call it 'home' which i have set to 2000
The page opens in its 2000 height but no scroll bar appears to scroll down in the browser...
If anyone's done this or knows how to, I'd really appreciate your input.

I've done something similar with a few of my apps, you have to use a little javascript on the html page and the ExternalInterface class in your app. Basically, you need to resize the "browser's" height based on your flash file. So here's quick example:
In your html template page (which you can edit in your flashbuilder project panel ->html-template->indext.template.html)
in your html add the jscript function:
<script type="text/javascript">
function setWindowHeight(heightVal){
document.getElementById('theWindow').style.height=heightVal; // make sure to give the body tag an id of 'theWindow' or whatever
</script>
In your flashbuilder app you need to call the javascript fx, you can use the ExternalInterface class for this:
ExternalInterface.call('setWindowHeight',val+'px');
you need to send the jscript fx the height of your container or whatever you want it resized to....

What do I need to set in order for each instance of the step type in the sequence to act individually?

Similar Messages

Maybe you are looking for