What do I need to set up a Marantz SR-7007 for AirPlay?

Hi folks, I just bought a Marantz SR-7007, and I'd like to set it up for AirPlay use. Does anyone know how to? I am unfortunately quite clueless. I know I need to plug in a wireless device to the Marantz, via Ethernet. That I get. Do I need a router, or an access point? What else do I need?
Thanks!

First off, nice AV receiver BTW.
I don't have this particular model, but I downloaded and familiarized myself with the user guide for yours. Your Marantz does not have built-in wireless capability, but it does for wired networking.
If your goal is to have it connect to the Internet by a wireless connection, then you have a few options to explore: 1) Although the SR-7007 has a USB port, I don't believe that it would support connecting a USB wireless adapter to. You may want to check with Marantz support to verify this, 2) Use an 802.11n AirPort Express Base Station (AXn) as a wireless Ethernet bridge. This option would require a second wireless router to provide a wireless network, and 3) Connect the Marantz directly to an existing router by Ethernet

Similar Messages

I want to use my Mac desktop as a portal for viewing my cable television via some kind of cord. Is this possible and what do I need to set this up?

I want to use my Mac desktop as a portal for viewing my cable television via some kind of cord. Is this possible and what do I need to set this up?

It can be done with analog but not digital thanks to "good 'ol" HDCP copy protection which apple (and most other manufacturers) unfortunately respect.
So you can take the analog output from your cable box (component -- 5 cables -- if it has it but generally they all have composite -- 3 cables) and feed it into some kind of converter or into some appropriate pci card for your mac pro. But none of them are going to let you directly use the HDMI output from the box to your computer.
Bottom line, no single cord is going to work and it will never be the higher quality digital picture you get on your tv.
Some qualification: There are boxes that I think support hdmi input. Look at Blackmagic. But I still don't think you can get around the HDCP from the cable box (might depend on the kind of cable box).

HOW TO?: Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Any devices connected to the same icloud account can sync all the data on that account. For this reason an icloud account is really for a single user.
On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud).

What do I need to process raw files in Photoshop CS5 for a Canon Rebel EOS t4i?

What do I need to process raw files in Photoshop CS5 for a Canon Rebel EOS t4i?

You would need ACR 7.x which is available in CS6. Or as ertho said you can get the free DNG 7.3 converter and convert raw to a DNG.

HT1222 My update won't verify. What do I need to do? I have enough space for the update.

My update won't verify. What do I need to do? I have enough space for the update.

Authetication servers are being hammered. Wait.

HT5312 what do i need to do to change the email address for when i try to reset my password for my account?

what do i need to do to change the email address for when i try to reset my password for my account?

Welcome to the Apple Community.
Start here, change your country if necessary and go to manage your account.

HT5622 what do i need to do when verifying my email address for facetime it tells me invalid account for this email address

What do i need to do when verifying my email address for facetime and it tells me invalid account for this email address? HELP!!!

You need to use your Apple ID to log into FaceTime

What do I need to do when sending my iPad in for warranty repair?

What do I need to do when sending my iPad in for warranty repair? I live too far away from an apple store so they told me to send it in using UPS but that's about all they told me. I have looked on the website but have found no additional information. What all do I need to do besides backing it up and what all do I need to send? Thanks in advance.

What to do when you return or send your iPhone, iPad, or iPod touch in for service
http://support.apple.com/kb/ht1438
7 Things to do before sending your iPhone or iPad for Repair
http://www.laptop-repair-manchester.co.uk/blog/7-things-to-do-before-sending-you r-iphone-or-ipad-for-repair/
 Cheers, Tom

How to set up and configure AirPort Express for AirPlay and iTunes

Saw somewhere that supposedly there were some apple written guidlines on the above topic. I have searched all over for them. Anyone know where I can get a copy to read through. Just trying to educate myself a bit and sety up another room with access to itunes, radio, etc with high quality speakers and amp off my express.

Here you go ...
How to set up and configure AirPort Express for AirPlay and iTunes

New to RDS - What do I need to set up for 3 users on 2008R2?

I need to set up an existing 2008R2 server with the RDS role so that 3 users can remote into the server and use Office applications. I've been on the phone with MSFT for 45 minutes and I think I get it, but I wanted to get a second opinion, and possible
rant....
As I understand it, I need 3 licenses for Office 2013 ProPlus in this situation.
I install Office 2013 on the server with the RDS role using the Office installer.
I register/license each User account
that will be logging in to the server (3 of them) as legitimate to use the Office 2013 installed on the server.
I do not *need* to install Office 2013 on the workstations of the three User's, but I may and not run afoul of the licensing terms.
Assuming all of that is true (and I doubt it is), I have the following questions:
Do I have to use 'volume licensing' for this, or can I just buy 3 retail copies of ProPlus?
Do I *have* to use ProPlus? I do need Outlook.
Can I use Office 365 ProPlus, and is it cheaper (up front) than the one-time perpetual license? Small Business Premium (see previous Question)?
Does the server need it's own license, meaning I need 4? If not, is there a special way I need to install Office on the server so it doesn't ask for a license?
Could a non-registered user (like a server Admin) use the Office installed on the server?
How many licenses are built into RDS? I recall hearing 2, to be used for admin purposes. So I would need to buy 3 CAL for the three Users intended in this setup?
What other questions should I have asked?!
I can't believe it's so complicated. And expensive! A quick perusal suggest a single ProPlus license is about $500! I'm sure once I have had time to digest it things will be fine, but up front, this system is really a pain in the rear.
Anyway, thanks to those brave enough to attempt to untangle this for me!

For the O365-on-RDS aspect, bad news, it's not a valid installation scenario.
You would need a Volume License edition of Office2013 to install upon RDS, because O365 only offers the Click-to-Run installable, and that can't be installed upon RDS:
http://technet.microsoft.com/en-us/library/ee624360.aspx#Table
http://community.office365.com/en-us/forums/156/t/138757.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Why set Xss and under what condition we need to set XSS

Hi guys,
In most of my java app, I will just set Xmx and Xmx. I would like to find out under what condition we need to specifically set Xss? Thanks in advance!
Cheers,
Mark

When you need a lot of stack. Or when you don't want a lot of stack to save memory.
Like, if you were doing naive recursion or just had so many frameworks inter operating that the stack would become too small.

What do I need to set in order for each instance of the step type in the sequence to act individually?

I'm not able to change parameters on one step without it changing the parameters on another instance of the step within the same sequence. Is there something in the step type properties that I need to set to change this?
For instance, I have created a custom step called "Battery PWR" that the user can insert into a sequence, hit the "edit" button, set a control in a GUI to 12V and hit an "Okay" button so that the post-step condition causes the power supply voltage to change. Then, later in the sequence I want the user to be able to insert the same custom step, hit the edit button, set the control to 0V and hit an "Okay" button so that the post-step conditition causes the power supply to go to 0V. The problem is, when the user edits one of the steps, it causes the other step to change to the same value.
I know that this has a simple fix, just can't seem to find it.

I answered my own question. I was reading and writing to a file global instead of the step parameters, so I was basically overwriting my variables each time I edited the step. I'm obviously a novice TestStand user.

What do I need to set up a recording studio?

I am looking at purchasing Logic Pro 8 and installing it on the computer in the sound booth at my church. I basically would want to take the sound board channels and feed it into Logic so each of the instruments are in separate channels in Logic. I know it is not that simple, so does anyone know the steps in between those two? What do I need to go from the soundboard to the computer? Thanks for the input!

Hi,
"What do I need to go from the soundboard to the computer?"
You need a sound card which has at least the number of planned outputs that you will want to record.
Say your soundboard (mixer) has 8 buss outputs, and that is what you are going to use to record with, then you would need a soundcard with at least 8 analogue inputs.
There are MANY brands to choose from, to fit almost any budget. Just stay away from M-Audio, they are not any good, IMHO.
As far as steps to recording your audio, well, you might benefit from buying a book on recording audio, it will be simpler to have one on hand when you're actually testing your equipemnt.
Cheers

Need help Setting up Multiple Static Ip , 1 for each port of the fios router

Need help Setting up multiple Static Ip on my fios router
I have been trying to figure out how to set up multiple ip in my fios router.
However I kind of managed how to set up multiple static ip However the way I want it is for each port of my router to have an external ip signed to it. ( like 4 different modem in 1 )
Verizon gave me 5 static ip but they can not help me how to set it up.
Have anyone here done more then one static ip on different ports? I assume that the process will be the after the second static ip.

You want to set up Static Nat. You will not assign the IP to a port, but rather to a local machine. Figure out what machines you want your IP's to go to. Under the firewall section you will see static nat. Pick the machine you want and enter one of the IP's you were assigned.

I have Iphoto 9 version 8.1.2 what do I need to download to get iCloud working again for iphoto

I have I photo 9 version 8.1.2 what do i need to download to get icloud working on Iphoto again
I have OSX 10.9.1 Mavericks

What do I need to use My Photo Stream?
To use My Photo Stream you need an iCloud account, compatible devices, and up-to-date software:
iPhone, iPad, or iPod touch with iOS 5.1 or later
Mac with OS X Lion v10.7.5 or later and iPhoto 9.2.2 or Aperture 3.2.3 or later
Apple TV (2nd generation) with Apple TV Software Update 5.0 or later
PC with Windows 7 or later and the iCloud Control Panel 2.1 or later for Windows
For complete iCloud setup instructions, visit How to set up iCloud.
Not sure what "working again" means - With iPhoto '09 version 8.1.2 you have never had PhotoStream working
But you can purchase ioPhoto '11 version 9.5.x in the LNApp store - backup your iPhoto library and install
LN

What do I need to set up a Marantz SR-7007 for AirPlay?

Similar Messages

Maybe you are looking for