What do i wrong?? it is impossible to import film and tv series from my external disc to itunes on my old laptop

It is impossible to import tv series from my external disc to itunes on my old laptop with windows xp

This can be caused by improperly formatted credit card billing address information. See http://support.apple.com/kb/TS1646.

Similar Messages

What can be wrong with my iPhone 4? There is no sound from incoming calls, SMS and even when I play music. I already checked that it's not muted, volume is high and not set to "vibrate mode."

What can be wrong with my iPhone 4s. There is no sound from incoming calls and SMS even when I try to play music.
I already checked that it is not muted, volume is high and not in " vibrate mode."

What can be wrong with my iPhone 4s. There is no sound from incoming calls and SMS even when I try to play music.
I already checked that it is not muted, volume is high and not in " vibrate mode."

I have a Windows 7 laptop using I tunes 64 and all my music files are on an external disc. I rarely use I tunes and at one point moved all my files (including the music files) from one external disc to another without considering what affect this wou

I have a Windows 7 laptop using I tunes 64 and all my music files are
on an external disc. I rarely use I tunes and at one point moved all my files
(including the music files) from one external disc to another without
considering what affect this would have on the I tunes library. When I eventually
attempted to use I tunes, every selected a song from the library resulted in a
message stating that the file couldn't be located. After following some of the procedures
explained in this community I was able to reconnect the library back to where
the associated music files are presently stored. However, there are still 2
problems that need to be corrected. 1) Every song file now has a duplicate. One
file works and the other file will result in the same message stating that the
file couldn't be located. Before there were 4,000 songs in the library, now
there are 8,000 songs. I need to eliminate the 4,000 dead song files. 2) All
the playlists are still associated with the dead song files which makes the
playlists unusable. Can the playlists be reconnected to the usable files
without manually having to recreate them? Thanks in advance for the help.
sdkr

So am I understanding correctly?
You used your iPod as a hard drive (drag and drop) instead of having iTunes install the music?
If you used drag and drop your choices are different than if you used iTunes to transfer.
Good luck!

What will happen to the organization of library if I removed the songs from windows explorer? Will iTunes automatically updated without all the deleted songs, or it will indicate 'missing location'? Any fast ways to clear this 'missing location' songs?

What will happen to the organization of library if I removed the songs from windows explorer?
Background: I found it easier to identify duplicated songs in windows explorer as the songs will be renamed .... 1.mp3, thus enabling me to remove the duplicated songs; unlike in iTunes where I know the trick of showing duplicate songs, but you don't know which one is the one with 1 at the end of the file name.
Will iTunes automatically update the library without all the deleted songs, or will it indicate 'missing location' songs? Any fast ways to clear this 'missing location' songs by highlighting them all and delete all at one go?
Thanks.

One way is to use iTunes Folder Watch with its option to check for dead tracks on start up.
Another option is with a set of Lost & Found playlists.
Lost & Found
Create a playlist called Found, select everything in Music and drag it into the Found playlist. Create a smart playlist called Lost matching All the rules Playlist is Music and Playlist is not Found. Your lost tracks will be in this playlist. You can delete them all with a Ctrl-A to select them and Shift-Delete to remove them.
You can then delete the Lost & Found playlists.
tt2

HT1212 someone entered the password wrong in my ipod too many times and it says its disabled to plug into itunes, when i plug it in to itunes it says it can't open because its password locked. so what can i do?

the password on my ipod was disabled and says plug into itunes. when i plug it into itunes it says the ipod cant connect because it is password locked.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT1212 what do you do if you dont remmember your password and it dosent show you to connect on itunes

what do you do if you dont remmember your password?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Really Wrong! Finder AND all Apps won't run on MB Pro 20-day old Laptop

Finder won't launch automatically (dock icon indicates it's NOT running even though there are folders and files on the desktop that are click-able (and thats as far as they go), and every single app I try to start warns "You can't open the application (Null) because it may be damaged or incomplete." My first idea was to launch Onyx to do a thorough clean-up/tune-up, but it won't launch either.
I would appreciate and advice or suggestions of action to get things back on track.
PS this MacBook Pro 17" is only 20 days old at most.
H E L P! I need to get some work done today! Please help.

Start up holding down the shift key until you get to the gray screen with the gear. It will boot into safe mode, excluding all third-party extensions. It will also run a file consistency check, so it takes a while to boot.
Have you done anything to change permissions or run any of the "maintenance" routines in Onyx?
If it doesn't boot into safe mode, try booting from the install DVD and check the disk with Disk Utility. The installer will start and after you select the language, you will have access to the menus. Disk Utility is in the Utilities menu.

What is the most plain xml format to import clips and sequence into Premiere ?

I want to create xml includes sequence and clips to import Premeire.
In this case, I have a reference xml that is exported from premiere for finalcut pro. But this finalcut pro export format looks so complicated because has alot of property that is belong to premiere pro. I tested by deleting some of them from xml and imported again, didn't effected anything.
Here is the question, How can I create an xml which requires minimum property details for premiere sequence and clips ? Is there any reference better than FinalCut Pro export xml format ?

Bruce from adobe replied that FCP Format is the best to import Premiere.
So I read FCP Format Documentation from http://documentation.apple.com/en/finalcutpro/usermanual/index.html#chapter=97%26section=3 %26tasks=true

HT4352 appletv - the airplay window on iphone 4gs and ipad gen2 does not show the mirroring slider? any one know what im doing wrong?

appletv - the airplay window on iphone 4gs and ipad gen2 does not show the mirroring slider? any one know what im doing wrong?

ccooper52
check out the tips and video at the bottom of this link and see if any of it helps
http://www.allabouthomeelectronics.com/apple-tv-airplay.html
Apple policy requires we mention we might benefit or profit somehow by your visit
please let us know if this helped

My macbook pro has stopped detecting my wi fi printer. What has gone wrong?

my macbook pro has stopped detecting my wi fi printer. What has gone wrong?

Bad RAM. Reseat it and see if that clears it up. If not then that need to be replace or the actual RAM sockets have gone bad.

Firefox generates a lot of webtraffic. What may be wrong?

My Firefox regularly generates a lot of web-traffic. While not page is apparently downloading, it continuously downloads something with speed around 50-60,000 B/sec, as the Resource Monitor shows. When I make it work offline, the traffic stops. I don't think it is updates. I can't really say more as I have no clue what may be the reason. Thanks.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

Janet.b wrote:
About 3 years old...pretty dated now I guess. Am thinking I may just need to have it upgraded by a Mac tech.
For what the Apple Store's charge you can buy almost buy a new computer.
Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
I did the drive replacement myself, got a faster drive of better quality for $300 instead.
Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
So you see what's going on here.
I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
They can offer more personalized care which you need. Clone your old drive to the new and everything.
With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

What's the 'best practice' way to get email and fax number from vendor?

Hello *,
could anybody let me know what the 'best-practice' is to get the fax number and smtp address from the vendor master? Is there a preferred function module I should use?
Thanks a lot,
Torsten

Hi ,
try that:
TYPE-POOLS: szadr.
DATA adr_kompl TYPE szadr_addr1_complete.
DATA adr1 TYPE szadr_addr1_line.
DATA adtel TYPE szadr_adtel_line.
DATA admail TYPE szadr_adsmtp_line.
DATA adfax TYPE szadr_adfax_line.
CALL FUNCTION 'ADDR_GET_COMPLETE'
       EXPORTING
            addrnumber              = lfa1-adrnr
       IMPORTING
            addr1_complete          = adr_kompl
       EXCEPTIONS
            parameter_error         = 1
            address_not_exist       = 2
            internal_error          = 3
            wrong_access_to_archive = 4
            OTHERS                  = 5.
* Mail
LOOP AT adr_kompl-adsmtp_tab INTO admail.
    MOVE admail-adsmtp-smtp_addr TO atab-mail.
ENDLOOP.
* fax
LOOP AT adr_kompl-adfax_tab INTO adfax.
    MOVE adfax-adfax-fax_number TO atab-fax_number.
ENDLOOP.
regards Andreas

HT201412 I cannot open the month of March 2013 in my iPad3 calendar. I can however see it in the year view for 2013 and I can view the daily and weekly calendars for March 2013. Any ideas what has gone wrong ? Thanks

I have a new iPad3 and have found I cannot open the month of March 2013 when I tap on it. All other months open OK ! I can see March 2013 in the yearly view and I can open the individual days, and weeks, of March 2013 but I cannot see the whole month in the monthly view. When I try to open the monthly view for March 2013 it returns me to the start screen which shows all the apps etc and closes the Calendar app. Any guidance of what is going wrong and how it can be corrected. Thanks !

Don't worry we have to start somewhere. Feel free to post your questions here, we learn from each other.

My iPhone 4 won't take incoming calls. Everytime someone phones me it goes straight to voice mail. What's gone wrong?

For some reason my iPhone 4 won't take incoming calls and everytime someone phones me it goes straight to voicemail what's gone wrong??

Look at the AT&T VVM User Guide for help setting up your visual voice mail.
If you still have problems, contact AT&T Customer Service at 1-800-331-0500 and ask them to check that your account is provisioned for an iPhone 4.

What do i wrong?? it is impossible to import film and tv series from my external disc to itunes on my old laptop

Similar Messages

Maybe you are looking for