What do system user SAPSYS and DDIC?

Hello,
In SM51 I can see the users SAPSYS and DDIC. Both execute continuously different reports.
Thus, also not user is logged on the system, system activity is noticed, caused by SAPSYS and DDIC.
Using ST03 you can see, which reports both processes execute regularily. But I do not have a clue, what these reports are good for. What is the purpose of SAPSYS and DDIC?
Can anybody give a detailed description?
thx, holger

SAPSYS & DDIC are pre-defined R/3 system users. User DDIC is a user with special privileges in installation, software logistics, and the ABAP Dictionary. The user master record for the above id's is created in clients 000 and 001 when you first install your R/3 System.

Similar Messages

  • WEBDAV FILE SYSTEM, user name and password changed

    Getting prompt as follows, WebDAV File System Authentication,
    Enter your user name and password to access the server at the URL "http://idisk.mac.com/bobbiealiaswink/" in the realm "idisk.mac.com."
    User name and password were changed recently by Mobile Me, now either or neither
    are being recognized by prompt. Constant reminders every few minutes since upgrading Safari two day ago....I am going buggy with prompts...have tried every possible configuration. Is there a way to enter new access area to enter new username and password?

    Hi Alias Bobbie, and a warm welcome to the forums!
    If this doesn;t help...
    http://discussions.apple.com/thread.jspa?threadID=2082353&tstart=0
    Try this...
    http://support.apple.com/kb/ts1544

  • System Users - SAPJSF and  JCO  ESS 6.0 Portal

    Hi All,
    in regards to ESS 6.0 Portal .  Would someone be able to explain
    the different functions of the users:   ESS user account ( employee)  , SAPJSF communication user, and the JCO user ( for metadata ?)
    Wondering how the SAPJSF user account is actioned when an ESS
    employee account is being used. Thank You !

    SAPJSF
    http://help.sap.com/saphelp_nw70/helpdata/EN/44/04265816343fdbe10000000a11466f/frameset.htm
    http://help.sap.com/saphelp_nw70/helpdata/EN/4e/225b42eeb66255e10000000a155106/frameset.htm
    jCO User
    The "metadata" JCO is the way the webdynpro connects to the backend (ECC for example) at a systems level (ie. the program itself talks to SAP as a system user in order to communicate with BAPIs/RFCs/etc to pull metadata information. The "user" defined for that connection will be a "system user" type userid (like your "RFC user" kinda thing). The other JCO connection is the "stream" used for the actual end user to communicate with the WebDynpro and the backend system. That connection will have the authoriations for that user checked. Make sense?
    So in other words....one connection is for the program to talk to the backend...the other is for the end user to talk to the backend THROUGH the program.
    reward points if helpful

  • HT201260 I have version '10.5.8'. What operating system is that and what do I have to do to get the latest operating system?

    How do I backup my MacBook Pro before installing a new operating system?

    You have to go to the Apple on-line store and order Snow Leopard, 10.6, install and on-line software update to 10.6.8.  Then if you meet the requirements in http://www.apple.com/osx/specs you can go to the Mac App Store and for $20 download Mountain Lion 10.8.3.  Snow Leopard is also $20.

  • What is a user friendly and free screencast for MBP?

    Just need a few suggestion and some advices on using it within chrome? 

    got my answer ... using quick time "screenshot"... but it creates a mov format. Any way to change the format to an mpeg easily?

  • What is the user and password to Oracle 8.17

    Dear expert,
    I have loaded IDES 4.7 with Oracle 8.17.
    I wish to query the SAP table using Oracle PL/SQL.
    What is the user, password and string to login into SAP Oracle database? Since I was not asked for user and password when installing Oracle I do not know how to login.
    Also can you let me know how to view/change table fields in SAP tables. I understand there are different ways but which in your opinion is the easiest to find the record I want to correct(as some tables have many fields).
    Your kind assistance is appreciated.

    Thank you for your reply. Both the user and password does not work on my IDES 4.7e system.
    However I tried with user Internal and without password and I successfully login.
    I then create a new user and also change the user=system
    password.

  • What should end-users initially do in BPC system?

    Hi: I am seeking some guidance here. My client wants to provide a small set of end-users access to the BPC sandbox system. These users are absolutely new to BPC, haven't had any training but use Excel regularly for their analytical & planning needs. The idea is to have them gain some familiarity with the look-and-feel of BPC for financial reporting purposes and assess how well it could serve as the financial report writing tool. It is a tall order for folks who have no experience with BPC but that's the approach. Can you please advice on what activities these users should and can realistically carry out that will not only give them a good overview but also help provide meaningful feedback on the product? (Data will be loaded in the sandbox and formal training will be provided soon but this question relates to the period prior to training).
    Full points will be awarded to all the helpful answers.
    Thank you very much,
    Jon

    Hello,
    I have exactly same situation.  One of my prospective customers is going to start small project to evaltuate BPC for their planning tool, and requires small sandbox machine.
    All replies above are useful information, also I think it is also important to consider your customer's requirement and expectation for better consulting service.
    I would like to add 2 things about this topic.
    1: current Excel spreadsheets
    If your customer uses tons of Excel sheets for planning process, it might be great to show the customer utilizing current Excel spread sheet by importing those to BPC and put some BPC functions like EvSND.  Then the cusomter would understand BPC is great application that enable to utilize existing Excel sheets easily.  I had some presales activities, and that seems to impress sereral prospective customers.
    2: how to build sandbox machine
    We're planning to build sandbox with virtual environment called "VMware".  The customer prepares just one stand alone note PC.  Then consultants make VMware files with VMware Workstation.  With VM, it is possible to make one set of files that includes OS, SQL Server, MS-Office, and BPC.  Everything is put into one file, and do not set up client server system.  I think you have to purchase VMware Workstation, but VMware Server might be free and has same functions.  The bad thing is that VM file is super heavy, I say 15GB in my teams' machine as average.  Also the note PC should be high-spec one.
    I do not have much information to answer your question.  I hope that comment would help you.  If you have further question, please feel free to ask me.
    Atsushi

  • Can't Start WLi server, Need info on System User Rights

    Hi:
    System
    WIN 2K Professional
    Laptop Dell Latitude
    No matter what system/Administrator user I try to use I can't start the WLserver
    for WLi. Error message is at end of posting
    What am I missing? or what rights should be assigned system user for WL to start?
    A system user name and password. WebLogic Server user names and passwords can
    contain any character from the JDK supported character sets, including international
    characters.
    Thank You
    David L. Wasler
    [email protected]
    ERROR MEssage
    <Feb 10, 2003 1:37:51 PM CST> <Notice> <Management> <140005> <Loading configuration
    D:\bea\user_projects\wlidomain\confi
    g.xml>
    <Feb 10, 2003 1:38:15 PM CST> <Notice> <Security> <090093> <No configuration data
    was found on server myserver_wli for r
    ealm CompatibilityRealm.>
    <Feb 10, 2003 1:38:16 PM CST> <Notice> <Security> <090082> <Security initializing
    using realm CompatibilityRealm.>
    <Feb 10, 2003 1:38:16 PM CST> <Critical> <WebLogicServer> <000364> <Server failed
    during initialization. Exception:java.
    lang.SecurityException: Authentication for user administrator denied
    java.lang.SecurityException: Authentication for user administrator denied
    at weblogic.security.service.SecurityServiceManager.doBootAuthorization(SecurityServiceManager.java:1078)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1216)
    at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:723)
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:594)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:282)
    at weblogic.Server.main(Server.java:32)

    Igore this message please. my machine was not having IPC resources that
    is why this problem was comming. I removed some of the IPC keys and it
    started to work.
    thanks,
    Abhishek.
    Abhishek Srivastava wrote:
    Hello All,
    I was successfully using tuxedo on my Red hat linux machine.
    Now I changed my linux to Mandrake. Now I cannot start tuxedo
    anymore. my ULOG is showing the following error
    110622.nt10172!BBL.3682.1024.0: LIBTUX_CAT:756: ERROR: Cannot get status
    for server files /apps/Tuxedo/bin/BBL and /apps/tuxedo/bin/BBL
    110622.nt10172!BBL.3682.1024.0: LIBTUX_CAT:248: ERROR: System init
    function failed, Uunixerr = : stat: No such file or directory
    110622.nt10172!tmboot.3681.1024.-2: 06-21-2002: Tuxedo Version 7.1
    110622.nt10172!tmboot.3681.1024.-2: CMDTUX_CAT:825: ERROR: Process BBL
    at hello failed with /T tperrno (TPEOS - operating system error)
    110622.nt10172!tmboot.3681.1024.-2: WARN: No BBL available on site hello.
    Will not attempt to boot server processes on that site.
    110622.nt10172!BBL.3682.1024.0: CMDTUX_CAT:26: INFO: The BBL is exiting
    system
    regards,
    Abhishek.

  • User-command and pf-status

    Hi can anybody please give tell me what is the user-command and what is pf-status.
    please provide me a sample code how to create these step by step.
    and how to copy standard pf-status to user defined one.
    thanks in advance
    kp

    hi,
    The Standard List Status
    As with normal screens, you can define your own GUI status for lists and attach it to a list level using the SET PF-STATUS statement. If you do not set a particular GUI status, the system sets a default list status for the list screen in an executable program. In other programs, for example, when you call a list from screen processing, you must set this status explicitly using the statement
    SET PF-STATUS space.
    This default interface always contains at least the functions described in the Standard List section.
    Unlike normal dialog statuses, the default list status is affected by the ABAP program.
    If you define event blocks in your program using the event keywords AT LINE-SELECTION or AT PF]
    This statement sets the status  parameters. To display an ampersand character ‘&’, repeat it in the title ‘&&’.
    Examples
    Example for dialog status in a list.
    REPORT demo_list_menu_painter.
    START-OF-SELECTION.
      SET PF-STATUS 'TEST'.
      WRITE:  'Basic list, SY-LSIND =', sy-lsind.
    AT LINE-SELECTION.
      WRITE:  'LINE-SELECTION, SY-LSIND =', sy-lsind.
    AT USER-COMMAND.
      CASE sy-ucomm.
        WHEN 'TEST'.
          WRITE:  'TEST, SY-LSIND =', sy-lsind.
      ENDCASE.
    This program uses a status TEST, defined in the Menu Painter.
    Function key F5 has the function code TEST and the text Test for demo.
    Function code TEST is entered in the List menu.
    The function codes PICK and TEST are assigned to pushbuttons.
    The user can trigger the AT USER-COMMAND event either by pressing F5 , or by choosing List ® Test for demo, or by choosing the pushbutton Test for demo.The user can trigger the AT LINE-SELECTION event by selecting a line.
    Example of setting a dialog status for the current list
    REPORT demo_list_set_pf_status_1.
    DATA: fcode TYPE TABLE OF sy-ucomm,
          wa_fcode TYPE sy-ucomm.
    START-OF-SELECTION.
      wa_fcode = 'FC1 '. APPEND wa_fcode TO fcode.
      wa_fcode = 'FC2 '. APPEND wa_fcode TO fcode.
      wa_fcode = 'FC3 '. APPEND wa_fcode TO fcode.
      wa_fcode = 'FC4 '. APPEND wa_fcode TO fcode.
      wa_fcode = 'FC5 '. APPEND wa_fcode TO fcode.
      wa_fcode = 'PICK'. APPEND wa_fcode TO fcode.
      SET PF-STATUS 'TEST'.
      WRITE: 'PF-Status:', sy-pfkey.
    AT LINE-SELECTION.
      IF sy-lsind = 20.
        SET PF-STATUS 'TEST' EXCLUDING fcode.
      ENDIF.
      WRITE: 'Line-Selection, SY-LSIND:', sy-lsind,
           / '                SY-PFKEY:', sy-pfkey.
    AT USER-COMMAND.
      IF sy-lsind = 20.
          SET PF-STATUS 'TEST' EXCLUDING fcode.
        ENDIF.
        WRITE: 'User-Command, SY-LSIND:', sy-lsind,
             / '              SY-UCOMM:', sy-ucomm,
             / '              SY-PFKEY:', sy-pfkey.
    Suppose that the function codes FC1 to FC5 are defined in the status TEST and assigned to pushbuttons: The function code PICK is assigned to function key F2 .
    When the program starts, the user can create detail lists by selecting a line or choosing one of the function codes FC1 to FC5. For all secondary lists up to level 20, the user interface TEST is the same as for the basic list:
    On list level 20, EXCLUDING ITAB deactivates all function codes that create detail lists. This prevents the user from causing a program termination by trying to create detail list number 21.
    Example of setting a dialog status for the current list
    REPORT demo_list_set_pf_status_2.
    START-OF-SELECTION.
      WRITE: 'SY-LSIND:', sy-lsind.
    AT LINE-SELECTION.
      SET PF-STATUS 'TEST' IMMEDIATELY.
    After executing the program, the output screen shows the basic list and the user interface predefined for line selection (with function code PICK).
    When you choose Choose, the user interface changes. However, since the AT LINE-SELECTION processing block does not contain an output statement, the system does not create a detail list: The status TEST is defined as in the previous example.
    Example: Titles of detail lists.
    REPORT demo_list_title .
    START-OF-SELECTION.
      WRITE 'Click me!' HOTSPOT COLOR 5 INVERSE ON.
    AT LINE-SELECTION.
      SET TITLEBAR 'TIT' WITH sy-lsind.
      WRITE 'Click again!' HOTSPOT COLOR 5 INVERSE ON.
    Regards,
    Sreevani.

  • System generated tickets and customer generated tickets

    what are system generated tickets and customer generated tickets.
    Edited by: jyothys9 on Mar 15, 2010 6:56 AM

    Hi,
    I hope you are asking about Support project scenarioes.It depends on project and Client. Beased in tools in Customer help desk you will get this kind of tickets. i.e. we can manually assifn the calles to BW Consultans, else once use will raise one request then it will automatically come to you mail box like that they will define/configure the hlpdesk tools.
    Thanks
    Reddy

  • Finding system user name

    hai any body tell to me how to find the system user name and password in windows domain
    now i am developing the java based anti virus software ...that why we need for that ...
    so anybody helsp to me
    also i was used runtime().exec("");->System commands but i can get the system user name
    anybody clear to this soluations ....

    If you have at least one account that has admin privileges, which will be one of those *short names* I pointed to, then open System Preferences, Accounts, click on the lock, supply one of those shortnames, add the password and with the Accounts now unlocked open the other account that you guess may be the Admin's account and view the Username.
    If there are several shortnames, work through each one methodically and logically. The number of possible combination are few.
    The other possibility is that there is no account that has admin privileges, but you say there is and I believe you.
    Postscript: if you are trying to invoke admin privileges, supplying the shortname and its correct password will suffice. There is no need to supply the full Username. Either will work.
    This makes me think you may not have the correct Admin password.
    Message was edited by: roam

  • What is System landscape

    Hi Experts !!
    What is system Land Scape and in what way it is used may i know. From previous thread i am not able to find exact meaning
    Regards
    hat

    Hi,
    Landscape is like a server system or like a layout of the servers or some may even call it the architecture of the servers viz. SAP is divided into three different landscape Development, Quality, Production.
    It is again depends on the organization's requirement. Depending upon the client requirement we can extend the
    Quality Systems & Production Systems to more than one.
    -  Development would have multiple clients for ex: 100- Golden for only configuration, 190- Sandbox,110- ABAP Development
    -  Quality may again have mutiple clients for ex: 200 -Integration Test, 201- for testing.
    -  Production may have something like a 300 Production.
    Landscape : is the arrangement for the servers
    IDES : is purely for education purpose and is not included in the landscape.
    DEVELOPMENT ---> QUALITY -
    > PRODUCTION
    DEVELOPMENT : is where the the consultants do the customization/ configuration as per the company's requirement.
    QUALITY : is where the core team members and other members test the customization/ configuration.
    PRODUCTION : is where the live data of the company is recorded.
    A request will flow from Dev->Qual->Prod and not backwards.
    Hope it will help you,
    Thanks Nirali P

  • User requiremets and benfits

    hi friends
    please send me url for case study of single instance from oracle sites.(similar to below sites)
    http://www.oracle.com/technetwork/database/features/ha-casestudies-098033.html
    i just want to know what would be user requirement and user benfits for RAC SETUP
    thanks for help
    cheers

    >whereas user_lobs and user_part_indexes shows me different information regarding tablespace.
    do you see different results after starting a new session after the ALTER statements were issued?

  • Routor user name and Password

    what is the user name and password to the wireless routor

    FAQ: I can't login to the VZ router

  • Time machine only copies User Info and Users (Applications, Library, and System are missing) from my quad core Mac Pro.  45 Gb of 162 Gb are missing.  Any one having success with time machine copying all folders using Mavericks?   What do I need to do dif

    Time machine only copies User Info and Users (Applications, Library, and System are missing) from my quad core Mac Pro.  45 Gb of 162 Gb are missing.  Any one having success with time machine copying all folders using Mavericks?
    What do I need to do differently?

    The late, great Pondini was investigating that issue before he passed away.
    See here: https://discussions.apple.com/thread/5125969
    I think there might be information there on how to reset Time Machine to do a full backup. I think you basically have to reset it and start over.

Maybe you are looking for